SEARCH · Search NASA
Results for “patterned substrate”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Nucleation and growth of blue phase liquid crystals on chemically-patterned surfaces: a surface anchoring assisted blue phase correlation length
In condensed matter, the correlation length is an essential parameter which describes the distance over which a material maintains its structural properties. In liquid crystals, for the orientational order parameter this characteristic length is of the order of nanometers, while in solid crystals it can extend to macroscopic length scales. Here, we report the measurement of the correlation length, or persistence length, of the crystallographic orientation of blue phases (BPs)—chiral liquid crystals with long-range 3D-crystalline structures and submicron-sized lattice-parameters. These materials exhibit phase transformations that have been identified as the liquid analog of crystal-crystal martensitic transformations. In this work, we use liquid epitaxial growth to achieve spontaneous BP-crystal nucleation and subsequent growth. Specifically, we design patterned substrates made of a binary array of regions with different liquid crystal anchoring, which facilitate a uniform nucleation and growth of BP-crystals with (100)-lattice orientation and a simple cubic symmetry. Furthermore, our results indicate that this simple cubic BP, the so-called blue phase II (BPII), forms first on the patterned surface, thereby propagating the growth of domains in directions parallel or perpendicular to the patterned regions. These results are used to understand the emergence of a surface anchoring assisted BPII-correlation length, taken as the distance over which the BP preserves its lattice orientation, as a function of time and pattern characteristics. We found that BPII single crystals can be achieved on patterned regions whose lateral dimensions are equal to or larger than 10 μm, consistent with our measurements of the BPII-correlation length. This newly acquired understanding of the role of surfaces on the formation of BPs is then used to design processes that permit formation of macroscopically large mono-domain, single-crystal BPs by relying on significantly reduced patterned areas (only part of the area is patterned), a feature that could benefit the applications of this intriguing class of materials.
Fabrication of Arrays of Topological Solitons in Patterned Chiral Liquid Crystals for Real-Time Observation of Morphogenesis
Topological solitons have knotted continuous field configurations embedded in a uniform background, and occur in cosmology, biology, and electromagnetism. However, real-time observation of their morphogenesis and dynamics is still challenging because their size and timescale are enormously large or tiny. Liquid crystal (LC) structures are promising candidates for a model-system to study the morphogenesis of topological solitons, enabling direct visualization due to the proper size and timescale. We report a new way is found to rationalize the real-time observation of the generation and transformation of topological solitons using cholesteric LCs confined in patterned substrates. The experimental demonstration shows the topologically protected structures arise via the transformation of topological defects. Numerical modeling based on minimization of free energy closely reconstructs the experimental findings. The fundamental insights obtained from the direct observations pose new theoretical challenges in understanding the morphogenesis of different types of topological solitons within a broad range of scales.
A Simple Route for Open Fluidic Devices with Particle Walls
Open fluidics, allowing liquid in a flow channel to interact with the external environment, is a revolutionary concept. However, fabricating a highly stable open fluidic device of arbitrary complexity, while maintaining reconfigurability, is still a challenge. This is achieved by the use of a patterned substrate and liquids that are covered with functional, readily available hydrophobic particles, providing great flexibility in the construction and use of open fluidic structures. Decorated with a coating of modified carbon nanotubes (CNTs) to encapsulate the fluids, the study capitalizes on the photothermal characteristics of CNTs to fabricate a device to probe the effects of temperature on tumor chemotherapy. The strategy substantially increases the availability and potential use of open fluidic devices.
One-Step Solution Patterning for Two-Dimensional Perovskite Nanoplate Arrays
Two-dimensional perovskite crystals have attracted significant attention for their diverse optoelectronic characteristics, owing to their superior semiconducting properties. However, the majority of studies to date have focused on single crystals, which pose challenges for integration into device arrays due to their incompatibility with selective growth or conventional lithography techniques. Here, a facile one-step solution process for synthesizing 2D perovskite crystal arrays is proposed through meniscus-guided coating on patterned substrates. Here we further utilized this method for the synthesis of lateral heterostructure nanoplate arrays. Six different 2D perovskite nanoplate arrays, including epitaxial heterostructures, are successfully realized. Optical and crystallographic characterizations show the high optical performance and crystallinity of the nanoplates. Moreover, this method is further employed to prepare high-performance 2D perovskite nanoplate photosensor arrays. This strategy can be utilized as a guideline for the fundamental investigation of optical properties and the development of high-performance optoelectronics of perovskite materials including photosensors and displays.
Crystallization of nanoparticles induced by precipitation of trace polymeric additives
Explore the source record for details and available documents.
CHAPTER 9. Bijels the Easy Way
Spinodal decomposition is not the only way to make a bijel. Indeed, while spinodal decomposition produces structures with a potentially useful morphology, it can be challenging to make bijels using this method and the resulting systems can be hard to process and manipulate. Furthermore, exploiting the functional properties of the assembled particle monolayer is extremely challenging. Here, we show how the assembly of nanoparticle surfactants at the liquid–liquid interface can be used to kinetically trap liquids into a wealth of complex structures without using spinodal decomposition. We apply liquid three-dimensional printing and moulding methods, along with patterned substrates with controllable wetting properties, to build all-liquid devices with applications in chemical synthesis, separation, and purification. The functional properties of the assembled nanomaterials can be exploited to produce interfacially structured liquids that are plasmonically and magnetically responsive. Finally, we conclude by arguing that, while the field shows great promise, efforts need to be made to translate liquid bicontinuous systems out of the laboratory and into meaningful, real-world applications, as well applications in more ‘exotic’ disciplines, such as synthetic biology.
Direct evidence that tumor cells soften when navigating confined spaces.
The mechanical properties of cells strongly regulate many physiological and pathological processes. For example, in cancer, invasive and metastatic tumor cells have often been reported to be softer than nontumor cells, raising speculation that cancer cells might adaptively soften to facilitate migration through narrow tissue spaces. Despite growing interest in targeting cell softening to impede invasion and metastasis, it remains to be directly demonstrated that tumor cells soften as they migrate through confined spaces. Here, we address this open question by combining topographically patterned substrates with atomic force microscopy (AFM). Using a polydimethylsiloxane open-roof microdevice featuring tapered, fibronectin-coated channels, we followed the migration of U2OS cells through various stages of confinement while simultaneously performing AFM indentation. As cells progress from unconfined migration to fully confined migration, cells soften and exclude Yes-associated protein from the nucleus. Superresolution imaging reveals that confinement induces remodeling of actomyosin stress fiber architecture. Companion studies with flat one-dimensional microlines indicate that the changes in cytoarchitecture and mechanics are intrinsically driven by topographical confinement rather than changes in cellular aspect ratio. Our studies represent among the most direct evidence to date that tumor cells soften during confined migration and support cell softening as a mechanoadaptive mechanism during invasion.
Impact of thermodynamic fluctuations and pattern size on the nucleation behavior during area selective deposition
In this work, the authors explore the impact that thermodynamic fluctuations have on the spontaneous appearance of defects during area selective deposition on patterned surfaces that are fully covered by adsorbates under local thermodynamic equilibrium, such as self-assembled monolayers. By using a simple lattice gas model for the adsorbed monolayer, the authors were able to track the spontaneous formation of defects in the monolayer as a function of the pattern width. The results indicate that, for pattern widths of the order of tens of nanometers, roughening effects at the pattern edge can be the leading source for the spontaneous appearance of nucleation defects. This leads to an enhancement of the density of defects that can be up to three orders of magnitude higher than those expected in uniform (not patterned) surfaces. The model also predicts a density of defects that is inversely proportional to the pattern width. Finally, if the dynamic nucleation of defects during area selective deposition is driven by thermodynamic fluctuations, the model predicts that the nucleation rate should be proportional to the total precursor fluency and independent of purge times. Moreover, a tight confinement of the monolayer through a high quality smooth interface in the patterned substrate and strong cohesive interactions between adsorbates should each contribute to a reduction of the overall defect density.
Substrate, temperature, and geographical patterns among nearly 2000 natural yeast isolates
Yeasts have broad importance as industrially and clinically relevant microbes and as powerful models for fundamental research, but we are only beginning to understand the roles yeasts play in natural ecosystems. Yeast ecology is often more difficult to study compared to other, more abundant microbes, but growing collections of natural yeast isolates are beginning to shed light on fundamental ecological questions. In this work, we used environmental sampling and isolation to assemble a dataset of 1962 isolates collected from throughout the contiguous United States of America (USA) and Alaska, which were then used to uncover geographic patterns, along with substrate and temperature associations among yeast taxa. We found some taxa, including the common yeasts Torulaspora delbrueckii and Saccharomyces paradoxus, to be repeatedly isolated from multiple sampled regions of the USA, and we classify these as broadly distributed cosmopolitan yeasts. A number of yeast taxon-substrate associations were identified, some of which were novel and some of which support previously reported associations. Further, we found a strong effect of isolation temperature on the phyla of yeasts recovered, as well as for many species. We speculate that substrate and isolation temperature associations reflect the ecological diversity of and niche partitioning by yeast taxa.
Development of High-Efficiency GaAs Solar Cells Grown on Nanopatterned GaAs Substrates
One approach to reducing the cost of high-efficiency III–V devices involves adding patterned layers to heteroepitaxial or homoepitaxial substrates to facilitate substrate removal and reuse. However, few studies have focused explicitly on high-quality devices grown over patterned substrates, which is required for any cost saving to be beneficial. In this work, we demonstrate the growth of high-efficiency GaAs solar cells on GaAs substrates patterned with an array of nanoscale SiOX mask stripes. We show that reducing the pattern dimensions to submicron length scales with nanoimprint lithography enables defect-free coalescence. By varying the growth conditions, faceting of the epilayer material during overgrowth of the patterned mask was also controlled. A V/III ratio of 200 during MOVPE overgrowth produced smooth coalesced epilayers, which is desirable for the growth of subsequent device layers. Inverted GaAs front homojunction devices grown on patterned GaAs(001) substrates achieved threading dislocation densities below 5 × 10 5 cm –2 and maintained >23% solar cell efficiencies at one sun illumination, equivalent to control devices grown on unpatterned epi-ready substrates.
Paraburkholderia madseniana sp. nov., a phenolic acid-degrading bacterium isolated from acidic forest soil
RP11 T was isolated from forest soil following enrichment with 4-hydroxybenzoic acid. Cells of RP11 T are aerobic, non-sporulating, exhibit swimming motility, and are rods (0.8 µm by 1.4 µm) that often occur as diplobacillus or in short chains (3–4 cells). Optimal growth on minimal media containing 4-hydroxybenzoic acid (µ=0.216 hr -1 ) occurred at 30 °C, pH 6.5 or 7.0 and 0% salinity. Comparative chemotaxonomic, genomic and phylogenetic analyses revealed the isolate was distinct from its closest relative type strains identified as Paraburkholderia aspalathi LMG 27731 T , Paraburkholderia fungorum LMG 16225 T and Paraburkholderia caffeinilytica CF1 T . Strain RP11 T is genetically distinct from P. aspalathi , its closest relative, in terms of 16S rRNA gene sequence similarity (98.7%), genomic average nucleotide identity (94%) and in silico DNA–DNA hybridization (56.7%±2.8). The composition of fatty acids and substrate utilization pattern differentiated strain RP11 T from its closest relatives, including growth on phthalic acid. Strain RP11 T encoded the greatest number of aromatic degradation genes of all eleven closely related type strains and uniquely encoded a phthalic acid dioxygenase and paralog of the 3-hydroxybenzoate 4-monooxygenase. The only ubiquinone detected in strain RP11 T was Q-8, and the major cellular fatty acids were C 16:0 , 3OH-C 16:0 , C 17:0 cyclo, C 19:0 cyclo ω8c, and summed feature 8 (C 18:1 ω7c/ω6c). On the basis of this polyphasic approach, it was determined that strain RP11 T represents a novel species from the genus Paraburkholderia for which the name Paraburkholderia madseniana sp. nov. is proposed. The type strain is RP11 T (=DSM 110123 T =LMG 31517 T ).
Paraburkholderia solitsugae sp. nov. and Paraburkholderia elongata sp. nov., phenolic acid-degrading bacteria isolated from forest soil and emended description of Paraburkholderia madseniana
Two bacterial strains, 1N T and 5N T , were isolated from hemlock forest soil using a soluble organic matter enrichment. Cells of 1N T (0.65×1.85 µm) and 5N T (0.6×1.85 µm) are Gram-stain-negative, aerobic, motile, non-sporulating and exist as single rods, diplobacilli or in chains of varying length. During growth in dilute media (≤0.1× tryptic soy broth; TSB), cells are primarily motile with flagella. At higher concentrations (≥0.3× TSB), cells of both strains increasingly form non-motile chains, and cells of 5N T elongate (0.57×~7 µm) and form especially long filaments. Optimum growth of 1N T and 5N T occurred at 25–30 °C, pH 6.5–7.0 and <0.5% salinity. Results of comparative chemotaxonomic, genomic and phylogenetic analyses revealed that 1N T and 5N T were distinct from one another and their closest related type strains: Paraburkholderia madseniana RP11 T , Paraburkholderia aspalathi LMG 27731 T and Paraburkholderia caffeinilytica CF1 T . The genomes of 1N T and 5N T had an average nucleotide identity (91.6 and 91.3%) and in silico DNA–DNA hybridization values (45.8%±2.6 and 45.5%±2.5) and differed in functional gene content from their closest related type strains. The composition of fatty acids and patterns of substrate use, including the catabolism of phenolic acids, also differentiated strains 1N T and 5N T from each other and their closest relatives. The only ubiquinone present in strains 1N T and 5N T was Q-8. The major cellular fatty acids were C 16 : 0 , 3OH-C 16 : 0 , C 17 : 0 cyclo, C 19 : 0 cyclo ω8 c and summed features 2 (3OH-C 14 : 0 / C 16 : 1 iso I), 3 (C 16 : 1 ω6 c /ω7 c ) and 8 (C 18 : 1 ω7 c /ω6 c ). A third bacterium, strain RL16-012-BIC-B, was isolated from soil associated with shallow roots and was determined to be a strain of P. madseniana (ANI, 98.8%; 16S rRNA gene similarity, 100%). Characterizations of strain RL16-012-BIC-B (DSM 110723=LMG 31706) led to proposed emendments to the species description of P. madseniana . Our polyphasic approach demonstrated that strains 1N T and 5N T represent novel species from the genus Paraburkholderia for which the names Paraburkholderia solitsugae sp. nov. (type strain 1N T =DSM 110721 T =LMG 31704 T ) and Paraburkholderia elongata sp. nov. (type strain 5N T =DSM 110722 T =LMG 31705 T ) are proposed.
Formation of antireflective surfaces
Technologies are described for methods and systems effective for etching nanostructures in a substrate. The methods may comprise depositing a patterned block copolymer on the substrate. The patterned block copolymer may include first and second polymer block domains. The methods may comprise applying a precursor to the patterned block copolymer to generate an infiltrated block copolymer. The precursor may infiltrate into the first polymer block domain and generate a material in the first polymer block domain. The methods may comprise applying a removal agent to the infiltrated block copolymer to generate a patterned material. The removal agent may be effective to remove the first and second polymer block domains from the substrate. The methods may comprise etching the substrate. The patterned material on the substrate may mask the substrate to pattern the etching. The etching may be performed under conditions to produce nanostructures in the substrate.
Formation of antireflective surfaces
Technologies are described for methods and systems effective for etching nanostructures in a substrate. The methods may comprise depositing a patterned block copolymer on the substrate. The patterned block copolymer may include first and second polymer block domains. The methods may comprise applying a precursor to the patterned block copolymer to generate an infiltrated block copolymer. The precursor may infiltrate into the first polymer block domain and generate a material in the first polymer block domain. The methods may comprise applying a removal agent to the infiltrated block copolymer to generate a patterned material. The removal agent may be effective to remove the first and second polymer block domains from the substrate. The methods may comprise etching the substrate. The patterned material on the substrate may mask the substrate to pattern the etching. The etching may be performed under conditions to produce nanostructures in the substrate.
Zinc‐Imidazolate Films as an All‐Dry Resist Technology
Here, motivated by the drawbacks of solution phase processing, an all‐dry resist formation process is presented that utilizes amorphous zinc‐imidazolate (aZnMIm) films deposited by atomic/molecular layer deposition (ALD/MLD), patterned with electron beam lithography (EBL), and developed by novel low temperature (120 °C) gas phase etching using 1,1,1,5,5,5‐hexafluoroacetylacetone (hfacH) to achieve well‐resolved 22 nm lines with a pitch of 30 nm. The effects of electron beam irradiation on the chemical structure and hfacH etch resistance of aZnMIm films are investigated, and it is found that electron irradiation degrades the 2‐methylimidazolate ligands and transforms aZnMIm into a more dense material that is resistant to etching by hfacH and has a C:N:Zn ratio effectively identical to that of unmodified aZnMIm. These findings showcase the potential for aZnMIm films to function in a dry resist technology. Sensitivity, contrast, and critical dimensions of the patterns are determined to be 37 mC cm −2 , 0.87, and 29 nm, respectively, for aZnMIm deposited on silicon substrates and patterned at 30 keV. This work introduces a new direction for solvent‐free resist processing, offering the prospect of scalable, high‐resolution patterning techniques for advanced semiconductor fabrication processes.
One–Step Fabrication of Nanocrystalline Nanonetwork SnO 2 Gas Sensors by Integrated Multilaser Processing
An integrated multilaser process is developed to fabricate nanocrystalline nanonetwork SnO 2 gas sensors in one integrated procedure, which combines electrodes fabrication, nanomaterials deposition, and postannealing. Interdigit electrodes are fabricated on an Au-coated fused silica substrate using a picosecond (ps) laser, which ablates the Au coating from the back of the substrate to pattern the electrodes. A novel transmitted Ps laser deposition (TPLD) process is designed to deposit SnO 2 nanonetwork on the interdigit electrodes with precise deposition area control under a close target-to-substrate distance. The obtained SnO 2 nanonetwork is in situ postannealed by a CO 2 laser to improve the crystallinity, while the nano morphology and grain size keep intact. To investigate the morphology and formation process of the nanonetwork, the microstructure of the laser-deposited SnO 2 layer is characterized. As a result, the crystallization control of CO 2 laser annealing is investigated through analyzing the Raman spectrum, X-ray diffraction (XRD) patterns, and lattice structures of the samples. By exposed to H 2 atmosphere, the fabricated gas sensor is demonstrated for H 2 monitoring.
Pure edge-dislocation half-loops in low-temperature GaN for V-defect formation
Lateral injection of carriers through semipolar crystallographic planes into c-plane QWs is one of the new frontiers in III-N light-emitting diodes (LEDs), especially for long wavelengths. Strategic use of V-defects has proven to be the most promising method for lateral injection, and creating optimal V-defect structure and density is an important research area for reducing forward voltage and increasing wall plug efficiency. Here, in this article, we present a novel method for forming V-defects in nominally unstressed low-temperature GaN through the generation of pure edge-dislocation half-loops. We present a detailed material science analysis of the loops via scattering-contrast electron microscopy. The loops have pure-edge character with Burgers vector 1/3 ⟨$11\bar{2}0$⟩, and form in a sessile orientation on {$11\bar{2}0$} a-planes. The two arms of the loops are inclined such that the extra half-planes face down toward the growth substrate. The dislocation loops can be used to intentionally form V-defects through conditions of kinetically limited growth: these conditions also favor nucleation of V-defects at ∼100% of other threading dislocations in the GaN templates. Patterned sapphire substrates (PSS) are one of the most important substrates for III-N LED growth because of their superior light extraction. However, due to its low threading dislocation density, PSS have not been used extensively for V-defect LEDs. This work provides a pathway for improved control of V-defect formation and density on LEDs grown on sapphire with the goal of enabling uniform lateral injection in these V-defect engineered LEDs with low forward voltage, including PSS for high light extraction.