Search NASA⌕ Search

SEARCH · Search NASA

Results for “power deposition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Operational space for lower hybrid heating scenarios in the full tungsten environment of WEST

In tungsten—W—Environment in Steady-state Tokamak (WEST), the lower hybrid current drive (LHCD) system is key for achieving long pulse operation by providing most of the non-inductive plasma current, as well as a crucial source of electron heating. Therefore, determining the operational space for its application is fundamental. In the present study, the LHCD operational space is deeply analyzed for 0.5 MA pulses. This space is bounded by three limits: (i) the ratio of the LHCD power over density must be above a threshold to compensate tungsten radiation with enough core heating, (ii) the line-averaged density must be high enough to allow good coupling of the hybrid wave with the plasma, and (iii) fast electron ripple losses must be below a limit to avoid reaching a thermal threshold on plasma-facing components. If the tungsten radiation peak or burn-through phase is not safely overcome, a maximum electron temperature of 1.5 keV is obtained, confinement is degraded, and magnetohydrodynamic activity is frequently triggered, potentially causing a disruption. From experimental measurements and interpretative simulations, we highlight the main mechanisms that prevent the plasma from heating up during LHCD power ramp-up. Three parameters play a major role: plasma density, tungsten concentration and LHCD power deposition. A strategy to overcome this limitation is found: a precise density ramp-up performed simultaneously with the increase in LHCD power. Additionally, we show that boronization greatly facilitates the burn-through of tungsten by lowering its content during the heating phase. Finally, taking into account the three constraints given above, the LHCD operational space is determined at power ramp-up and during constant heating phases.

lower hybrid heating and current drive↗
DOE OSTI2023

Light-Induced Structural Dynamics and Charge Transport in Layered Halide Perovskite Thin Films

The dynamic nature of the metal halide perovskite lattice upon photoexcitation plays a vital role in their properties. Here we report an observation of light-induced structure dynamics in quasi-2D Ruddlesden–Popper phase perovskite thin films and its impact on the carrier transport properties. By a time-resolved X-ray scattering technique, we observe a rapid lattice expansion upon photoexcitation, followed by a slow relaxation over the course of 100 ns in the dark. Theoretical modeling suggests that the expansion originates from the lattice’s thermal fluctuations caused by photon energy deposition. Power dependent optical spectroscopy and photoconductivity indicate that high laser powers triggered a strong local structural disorder, which increased the charge dissociation activation energy that results in localized transport. Finally, our study investigates the impact of laser energy deposition on the lattices and the subsequent carrier transport properties, that are relevant to device operations.

2D perovskites↗
DOE OSTI2021

Magnetic probe diagnostics of nonlinear standing waves and bulk ohmic electron power absorption in capacitive discharges

It is recognized that standing wave effects appearing in large-area, very-high-frequency capacitively coupled plasma (CCP) reactors cause center-high plasma non-uniformity. Using a high-frequency magnetic probe, we present a direct experimental diagnostic of the nonlinear standing waves and bulk ohmic electron power absorption dynamics in low pressure CCP discharges for different driving frequencies of 13.56, 30, and 60 MHz. The design, principle, calibration, and validation of the probe are described in detail. Spatial structures of the harmonics of the magnetic field, determined by the magnetic probe, were used to calculate the distributions of the harmonic current and the corresponding ohmic electron power deposition, providing insights into the behavior of nonlinear harmonics. At a low driving frequency, i.e. 13.56 MHz, no remarkable nonlinear standing waves were identified and the bulk ohmic electron power absorption was observed to be negligible. Here, the harmonic magnetic field/current was found to increase dramatically with the driving frequency, due to decreased sheath reactance and more remarkable nonlinear standing waves at a higher driving frequency, leading to the enhancements of the ohmic heating and the plasma density in the bulk, specifically at the electrode center. At a high driving frequency, i.e. 60 MHz, the high-order harmonic current density and the corresponding ohmic electron power absorption exhibited a similar node structure, with the main peak on axis, and one or more minor peaks between the electrode center and the edge, contributing to the center-high profile of the plasma density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Harnessing Machine Learning to Predict MoS 2 Solid Lubricant Performance

Physical vapor deposited (PVD) molybdenum disulfide (MoS 2 ) solid lubricant coatings are an exemplar material system for machine learning methods due to small changes in process variables often causing large variations in microstructure and mechanical/tribological properties. Here, in this work, a gradient boosted regression tree machine learning method is applied to an existing experimental data set containing process, microstructure, and property information to create deeper insights into the process-structure–property relationships for molybdenum disulfide (MoS 2 ) solid lubricant coatings. The optimized and cross-validated models show good predictive capabilities for density, reduced modulus, hardness, wear rate, and initial coefficients of friction. The contribution of individual deposition variables (i.e., argon pressure, deposition power, target conditioning) on coating properties is highlighted through feature importance. The process-property relationships established herein show linear and non-linear relationships and highlight the influence of uncontrolled deposition variables (i.e., target conditioning) on the tribological performance.

MoS2↗
DOE OSTI2024

Low-pressure inductively coupled plasmas in hydrogen: impact of gas heating on the spatial distribution of atomic hydrogen and vibrationally excited states

Non-equilibrium inductively coupled plasmas (ICPs) operating in hydrogen are of significant interest for applications including large-area materials processing. Increasing control of spatial gas heating, which drives the formation of neutral species density gradients and the rate of gas-temperature-dependent reactions, is critical. In this study, we use 2D fluid-kinetic simulations with the Hybrid Plasma Equipment Model to investigate the spatially resolved production of atomic hydrogen in a low-pressure planar ICP operating in pure hydrogen (10–20 Pa or 0.075–0.15 Torr, 300 W). The reaction set incorporates self-consistent calculation of the spatially resolved gas temperature and 14 vibrationally excited states. We find that the formation of neutral-gas density gradients, which result from spatially non-uniform electrical power deposition at constant pressure, can drive significant variations in the vibrational distribution function and density of atomic hydrogen when gas heating is spatially resolved. This highlights the significance of spatial gas heating on the production of reactive species in relatively high-power-density plasma processing sources.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Plasma heating by electron cyclotron wave and the temperature effects on lower hybrid current drive on EAST

This paper presents the progress in the long—pulse operation of the electron cyclotron (EC) system and the achievements in high—electron temperature plasmas by the combined EC and lower hybrid (LH) waves heating since the EC system was built in 2015. An electron temperature of up to 12 keV with a duration over 100 s was realized by the simultaneous heating of EC and LH waves at the line-averaged density ${\bar n_{\text{e}}}$ ~1.8 × 10 19 m –3 . The plasma heating effect strongly depends on the location of EC power deposition. H-mode plasmas with solely EC wave auxiliary heating have been obtained on EAST for the first time. These H-mode discharges show an enhanced confinement factor H 98(y,2) around 1.0, which is higher than the previous H-mode using LH power alone (Xu et al 2011 Nucl. Fusion 51 072001). The total heating power is very close to the threshold value for L–H transition according to the international tokamak scaling. In addition to the temperature effects inside the separatrix, higher electron temperature produced by EC wave is found to reduce the LH power loss in the scrape-off layer due to collisional absorption, which is beneficial to further increase the LH current drive efficiency. Ray-tracing/Fokker–Planck modeling results indicate that higher electron temperature can shorten the LH wave propagation on EAST in a multiple-pass regime, thus decreasing the collisional dissipation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Refined interpretation of electron temperature response to neutral beam injection at DIII-D

Accurate particle and power deposition profiles of neutral beam injection (NBI) are essential to transport studies, and that information is usually acquired through Monte Carlo simulations with a given collisional model. The deposition process of the energetic beam particles leads to the informative electron temperature (T e ) evolution trajectory, which can be captured by electron cyclotron emission (ECE) system due to its good spatial and temporal resolution. Previously, some work has been done to interpret the T e responses to the pulsed NBI as a linear heating source with Fourier-based techniques, although that approach fell short when the fast ion slowing-down time becomes significant (~100 ms). It has been observed in DIII-D that the modulated NBI pulses (10–50 Hz) reduce local core T e values ~0.1 keV through cold electron dilution in high-T e (>2 keV) plasmas alongside accumulative heating. Here, a novel approach to interpret the T e response to NBI was developed by linearizing and modeling the detailed T e evolution trajectory using coherently averaged ECE data based on the different time scales of the terms in the local power and particle balance equations. The technique does not require absolute calibrations of ECE and is independent of collisional models. The resulting beam deposition profiles show good consistency and reasonable agreement with Monte Carlo calculations based on the atomic data from the Atomic Data and Analysis Structure (ADAS). Local electron density response measured by Thomson scattering (TS) also suggests the same features when the beam pulse is large enough for that diagnostic to resolve. The remaining discrepancies are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

HCOO - aq Degradation in Droplets by OH aq in an Atmospheric Pressure Glow Discharge

Plasmas in contact with liquids can degrade organic molecules in solution, as reactive oxygen and nitrogen species produced in the plasma solvate into the liquid. Immersing small droplets (tens of microns in diameter) in the plasma can more rapidly activate the liquid compared to treating a large volume of liquid with a smaller surface-to-volume ratio. The interactions between a radio frequency glow discharge sustained in He/H 2 O and a water droplet containing formate (HCOO - aq ) immersed in and flowing through the plasma were modeled using a 0-dimensional global plasma chemistry model to investigate these activation processes. HCOO - aq interacts with OH aq , produced from solvation of OH from the gas phase. HCOO - aq concentrations were benchmarked with previously reported experimental measurements. The diameter of the droplet, initial HCOO - aq concentration, and gas flow rate affect only the HCOO - aq concentration and OH aq density, leaving the OH density in the gas phase unaffected. Power deposition and gas mixture (e.g., percentage of H 2 O) change both the gas and liquid phase chemistry. A general trend was observed – during the first portion of droplet exposure to the plasma, OH aq primarily consumes HCOO - aq . However, O2 - aq , a byproduct of HCOO - aq consumption, consumes OH aq once O2 - aq reaches a critically large density. Using HCOO - aq as a surrogate for OH aq sensitive contaminants, combinations of residence time, droplet diameter, water vapor density, and power will determine the optimum remediation strategy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

EVALUATION OF OPERATION TEMPERATURES UNDER NATURAL CONVECTION HELIUM FLOW IN A CONFINED CAVITY

The Spallation Neutron Source (SNS) is a high-power accelerator-based pulsed neutron source led by Oak Ridge National Laboratory (ORNL) to achieve high fluxes of neutrons for scientific experiments. Active and passive cooling of the systems and parts forming the SNS have been considered to warrant the safe operation of the facility. The diverse cooling systems make use of conjugated heat transfer mechanisms to provide a stable operation temperature for all components in the machine. Thermal power deposited into stainless-steel piping lines due to particle radiation may reach values of up to 1.2 W/cc in the regions located closer to the center of the lower IRP. These energy deposition levels, in not actively cooled components, such as the transfer-line-outer-vacuum-layer may increase the temperature of the component beyond design requirement limitations. The evaluation of the operation temperatures for the former components relies in the assumption that a low-pressure helium atmosphere provides enough heat removal capacity based on natural convection phenomena. In this work, the evaluation of steady state temperatures in components such as the CMS transfer lines has been evaluated using computational fluid dynamics (CFD), analytical correlations and experimental measurements. The companion experiments were conducted in a closed helium system at pressures varying from 1.1 to 1.5 bar. A copper rod was affixed horizontally between viewing windows and heated at constant power, and measurements were made of both the rod temperature and ambient temperature via a system fiberoptic distributed temperature sensors and RTDs. It was found that the measured heat transfer coefficients agree well with the predictions of Churchill and Chu correlations across the range of cases considered. Additionally, the ambient helium volume above the rod was imaged via background oriented schlieren (BOS), and these data was used to determine the line-averaged density gradients in this region. These gradients were compared to simulation data to validate the predictions of natural convection simulations.

Dominguez-Ontiveros, Elvis [ORNL] (ORCID:000000018↗
DOE OSTI2022

Quantifying heat and particle flux to primary and secondary divertors for various types of edge-localized-modes

Between 15% and 30% of edge-localized-mode (ELM) heat flux can be deposited to regions outside the main divertor including the far scrape-off-layer (SOL), private flux region (PFR), and secondary divertor inner target. Analysis shown here demonstrates that type-I and small ELM plasmas are transported to the PFR and to the secondary inner divertor, which is magnetically isolated from the outer divertor, leading to well-defined heat flux profiles and with peak values that can surpass those at the secondary outer target. Such features are consistently observed for pedestal collisionalities from $ν$$^{*}_{e}$ ~1.5 to $ν$$^{*}_{e}$ ~3.9. Heat flux profiles of the examined ELM types feature rippled structures due to bursts in the outer far-SOL region but not on the secondary inner target, causing long decay lengths in the time-averaged ELM profiles. The contribution of each ELM type to the total time-averaged power deposited to the secondary divertor has been evaluated, showing that grassy ELMs contribute ~8%, small ELMs ~67%, and type-I ELMs ~85%. These findings imply that small ELMs may yet pose a concern for future machines if some regions of the main wall are not designed to withstand significant heat and particle fluxes. Due to the low intra-ELM heat flux contribution, however, the grassy ELM regime is an attractive option for an ELMing scenario in future machines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

A surface mechanism for O 3 production with N 2 addition in dielectric barrier discharges

Ozone, O 3 , is a strong oxidizing agent often used for water purification. O 3 is typically produced in dielectric barrier discharges (DBDs) by electron-impact dissociation of O 2 , followed by three-body association reactions between O and O 2 . Previous studies on O 3 formation in low-temperature plasma DBDs have shown that O 3 concentrations can drop to nearly zero after continued operation, termed the ozone-zero phenomenon (OZP). Including small (<4%) admixtures of N 2 can suppress this phenomenon and increase the O 3 production relative to using pure O 2 in spite of power deposition being diverted from O 2 to N 2 and the production of nitrogen oxides, N x O y . The OZP is hypothesized to occur because O 3 is destroyed on the surfaces in contact with the plasma. Including N 2 in the gas mixture enables N atoms to occupy surface sites that would otherwise participate in O 3 destruction. The effect of N 2 in ozone-producing DBDs was computationally investigated using a global plasma chemistry model. A general surface reaction mechanism is proposed to explain the increase in O 3 production with N 2 admixtures. The mechanism includes O 3 formation and destruction on the surfaces, adsorption and recombination of O and N, desorption of O 2 and N 2 , and NO x reactions. Without these reactions on the surface, the density of O 3 monotonically decreases with increasing N 2 admixture due to power absorption by N 2 leading to the formation of nitrogen oxides. With N-based surface chemistry, the concentrations of O 3 are maximum with a few tenths of percent of N 2 depending on the O 3 destruction probability on the surface. The consequences of the surface chemistry on ozone production are less than the effect of gas temperature without surface processes. An increase in the O 3 density with N-based surface chemistry occurs when the surface destruction probability of O 3 or the surface roughness was decreased.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Progress of Divertor Heat and Particle Flux Control in EAST for Advanced Steady-State Operation in the Last 10 Years

Active control of the excessively high heat and particle fluxes on the divertor target plates is of fundamental importance to the steady state operation of tokamaks, especially for fusion reactors. A series of experiments have been carried out on this critical issue to relieve the plasma-wall interactions in the experimental advanced superconducting tokamak (EAST) in the last ten years, not only contributing to the long pulse operation of EAST itself, but also providing physical understandings and potential techniques to the next-generation devices like ITER. Here we have characterized the power deposition pattern and broadened the divertor footprint width effectively. The plasma-wetted area is actively handled using either 3-dimentional edge magnetic topology or advanced plasma equilibrium, thereby peak heat flux around the strike point is reduced. Active control of detachment or radiation compatible with core plasma performance has progressed significantly in very recent years, with a series of active feedback control modules developed and utilized successfully, based on the divertor physics advances with both experiments and simulation. The upper divertor of EAST was upgraded from graphite to active water-cooling ITER-like tungsten in 2014, exhibiting much enhanced heat removal capability. As for the particle exhaust including both fueling and impurity particles, in addition to wall conditioning and impurity source control, the efficiency of particle flux exhaust is optimized by making full use of the divertor closure and the plasma drifts in both scrape-off layer and divertor volume. These heat and particle exhaust advances contribute greatly to a series of EAST achievements like H-mode operation over 100 s. A brief near-term plan on the integrated control of divertor plasma-wall interactions in long-time scale will also be introduced, aiming to provide favorable divertor operation solution for ITER and CFETR.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Reaction Pathways and Energy Consumption in NH 3 Decomposition for H 2 Production by Low Temperature, Atmospheric Pressure Plasma

Pathways for NH 3 decomposition to N 2 and N 2 H 4 by atmospheric pressure nonthermal plasma are analyzed using a combination of molecular beam mass spectrometry measurements and zero-dimensional kinetic modeling. Experimental measurements show that NH 3 conversion and selectivity towards N 2 formation scale monotonically with the specific energy input into the plasma with ~ 100% selectivity to N 2 formation achieved at specific energy inputs above 0.12 J cm −3 (3.1 eV (molecule NH 3 ) −1 ). The kinetic model recovers these trends, although it underpredicts N 2 selectivity at low specific energy input. These discrepancies can be explained by the underestimation of reaction rate coefficients for reactions that consume N 2 H x species in collisions with H radicals and/or radial nonuniformities in power deposition, gas temperature, and species concentrations that are not represented by the plug flow approximation used in the model. The kinetic model shows that N 2 formation proceeds through N 2 H x decomposition pathways rather than NH x decomposition pathways in low temperature, atmospheric pressure plasma. Higher selectivity toward N 2 production can be achieved by operating at higher NH 3 conversion and with a higher gas temperature. Furthermore, the high energy cost of NH 3 decomposition by atmospheric pressure nonthermal plasma found in this work (25–50 eV (molecule NH 3 converted) −1 ; 17–33 eV (molecule H 2 formed) −1 ) is a result of the energy requirement for electron-impact dissociation of NH 3 and the significant re-formation of NH 3 by three-body recombination reactions between NH 2 and H.

Nonthermal plasma↗
DOE OSTI2026

Construction of generalized quasilinear diffusion coefficient using neural networks with physical restrictions

The quasilinear diffusion coefficient (D QL ) derived from our machine learning framework shows comparable trends with the ground truth D QL obtained from GENRAY-CQL3D simulations. Additionally, for the strong absorption cases, the radial current drive profiles generated using the D QL from our model exhibit consistent behavior with those obtained from the original simulation. These findings indicate the potential of our surrogate modeling approach with physical restrictions to replicate key wave–plasma interaction characteristics while reducing computational costs. Traditionally, calculating D QL for wave–particle interactions relies on computationally intensive wave simulations coupled with Fokker–Planck solvers. To address this challenge, we developed a machine learning-based surrogate model with physical restrictions derived from cold plasma theory and bounce-averaged damping effects. First, we establish the propagation domain of Lower Hybrid Waves in the (N∥, ρ) space by identifying the accessibility limit and determining the upper and lower bounds of N∥ using the Potential Power Deposition (PPD) method. Subsequently, leveraging a database constructed using Latin hypercube sampling alongside the underlying physical restrictions (e.g. PPD), machine learning methods including U-Net and Recurrent Neural Networks are employed to design a physics-restricted machine learning framework capable of reconstructing D QL .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Calculating RF current condensation with consistent ray-tracing and island heating

Finally, by exploiting the nonlinear amplification of the power deposition of RF waves, current condensation promises new pathways to the stabilization of magnetic islands. We present a numerical analysis of current condensation, coupling a geometrical optics treatment of wave propagation and damping to a thermal diffusion equation solver in the island. Taking into account the island geometry and relativistic damping, previous analytical theory can be made more precise and specific scenarios can be realistically predicted. With this more precise description, bifurcations and associated hysteresis effects could be obtained in an ITER-like scenario at realistic parameter values. Moreover, it is shown that dynamically varying the RF wave launching angles can lead to hysteresis and help to avoid the nonlinear shadowing effect.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Using extended MHD to explore lasers as a trigger for x-pinches

X-pinches have been shown to be a source of extremely intense x-ray emissions useful for diagnosing plasma dynamics and imaging biological objects. The most striking feature of an x-pinch is the hotspot, the point source from where all the x rays come from. Unfortunately, the exact timing and location of the hotspot are still unpredictable. Since an x-pinch hotspot forms from instabilities (like an m = 0 mode), we will computationally explore whether we can use a high-power laser to control the timing and location of these instabilities. Our goal is to reduce the temporal and spatial jitter associated with the x-ray burst. Using an extended MHD (XMHD) code, we explore the non-relativistic instability generation using a current profile of a 250 kA linear transformer driver system and laser characteristics of SLAC's Matter in Extreme Conditions laboratory. Our results include both laser-penetration results using a boundary-defined electromagnetic (EM) wave and instability results from a power-deposition method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

On the merit of hot ion mode for tearing mode stabilization

The stabilization of tearing modes with rf driven current benefits from the cooperative feedback loop between rf power deposition and electron temperature within the island. This effect, termed rf current condensation, can greatly enhance and localize the current driven within magnetic islands. It has previously been shown that the condensation effect opens the possibility of passive stabilization with broad rf profiles, as would be typical of LHCD for steady state operation. Here, we show that this self-healing effect can be dramatically amplified by operation in a hot ion mode, due to the additional electron heat source provided by the hotter ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Production of high fluence laser beams using ion wave plasma optics

Optical components for laser beams with high peak and averaged powers are being developed worldwide using stimulated plasma scattering that occurs when plasmas interact with intense, coherent light. After decades of pursuit of pulse compressors, mirrors, and other plasma based components that can be created by stimulated scattering from electron density perturbations forming on ultra-short time scales (e.g., via Stimulated Raman Scattering), more recent work has produced optical components on longer time scales allowing ion motion as well [via Stimulated Brillouin Scattering (SBS)]. In the most recent work, ion wave plasma optics have had success in producing pulses of focusable coherent light with high energy and fluence by operating on ns time scales and now promise to enable numerous applications. Experiments have further shown that in some parameter regimes, even simple plasma response models can describe the output of such optics with sufficient accuracy that they can be used as engineering tools to design plasma optics for future applications, as is already being done to control power deposition in fusion targets. In addition, the development of more sophisticated models promises to enable still higher performance from SBS driven plasma optical components under a wider range of conditions. The present status and most promising directions for future development of ion wave plasma optic techniques are discussed here.

47 OTHER INSTRUMENTATION↗