Prospects for experimental inference and improved computational treatments of electron scattering processes influencing conductivity
Explore the source record for details and available documents.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Here we focus on spinel-cored spherule calcium-aluminum rich inclusions (CAI), dominantly ~75-80 microns in diameter in the CO3.1 chondrite Miller Range 90019, which make up ~ 12 % of the fine-grained CAIs in one thin section. Their mineralogical content ranges from rare grossite- and hibonite-bearing varieties, through perovskite-melilitebearing, to fassaite-bearing and finally anorthitebearing. Non-spherical CAIs have been divided into 4 other groups, defined based on mineralogical abundances. We also characterized a group of AOAs from this sample. No glass has been recognized in any inclusions. Some relatively evolved members (anorthite-, spinel- + fassaite-bearing) among the spherules are found engulfed in AOAs. We characterized the bulk compositions of ~145 CAIs and AOAs in this meteorite, derived from EDS-x-ray mapping of the inclusions. We determined bulk compositions both with and without Wark-Lovering rims (when present), which are largely composed of diopside forsterite. The balance of the inclusions appear to have not been melted or partially melted, but rather they have textures that indicate they are condensates, often modified by extensive reaction with nebular gases. This presents the opportunity to examine effects on the bulk compositions of spherules resulting potentially from melting plus evaporation. Other aspects of this suite of refractory inclusions have been discussed in these abstracts. Oxygen isotope variations in one spherule were presented in [4]. The latter study showed a complex history of reaction with nebular gases possessing a variety of Oisotope compositions. Additional O isotopic studies of inclusions in this work are included in Mane et al.
The National Environmental Policy Act (NEPA) is incorporated into the planning and decision-making culture of all natural resource agencies in the U.S. Yet, we know little about how the attitudes and internal interactions of interdisciplinary (ID) teams engaged in NEPA processes influence process outcomes. We conducted a web-based survey of 106 ID team leaders involved with environmental analyses (EA) or environmental impact statements (EIS) for projects dealing with recreation and travel management on national forests. We explore how they define success in these processes and identify factors most powerfully associated with perceptions of positive outcomes. The survey revealed a tremendous diversity in definitions of success. Strong correlations between the perceived importance of particular indicators of success and their achievement suggest that pre-conceived notions may often help to shape process outcomes. Regression analyses revealed the following factors as the best predictors of ID team leaders' perception of an 'excellent outcome': achievement of the agency mission, whether compromise had taken place between the interested parties, team satisfaction and harmony, timely process completion, and project implementation. Yet, respondents consistently ranked compromise with interested parties and team member satisfaction among the least important measures of successful NEPA processes. Results suggest that clarifying appropriate measures of success in NEPA processes across the agency could make ID team performance more consistent. The research also suggests that greater attention to ID team interactions, both internally and between teams and interested publics, could result in better outcomes.
The investigation of the mechanical alloying (MA) conditions for producing the advanced oxide dispersion strengthened (ODS) 14YWT ferritic alloy led to significant improvements in balancing the strength, ductility and fracture toughness properties while still maintaining the salient microstructural features consisting of ultra-fine grains and high concentration of Y-, Ti- and O-enriched nanoclusters. The implemented changes to the processing conditions included reducing the contamination of the powder during ball milling, applying a pre-extrusion annealing treatment on the ball milled powder and exploring different extrusion temperatures at 850 C (SM170 heat), 1000 C (SM185) and 1150 C (SM200). The microstructural studies of the three 14YWT heats showed similarities in the dispersion of nanoclusters and sub-micron size grains, indicating the microstructure was insensitive to the different extrusion conditions. Compared to past 14YWT heats, the three new heats showed lower strength, but higher ductility levels between 25 and 800 C and significantly higher fracture toughness values between 25 C and 700 C. The lower contamination levels of O, C and N achieved with improved ball milling conditions plus the slightly larger grain size were identified as important factors for improving the balance in mechanical properties of the three heats of 14YWT.
We report the influence of processing atmosphere on the evolution of oxide-embedded germanium nanocrystals (Ge-NCs) formed by the thermal processing of (C{sub 6}H{sub 5}GeO{sub 1.5}){sub n} sol-gel polymers. In an inert processing atmosphere (100% Ar), the generation of elemental Ge from thermally induced disproportionation of the germanium rich oxide (GRO) leads to GeO{sub 2}-embedded Ge-NCs whose size is independent of peak processing temperature and time. Processing in a slightly reducing atmosphere (5% H{sub 2}/95% Ar) activates a second Ge-NC formation and growth pathway, involving the reduction of Ge oxide species. Here, we report that the processing atmosphere governs the distribution of Ge species. By modifying the contributions from redistribution and reduction reactions within the GRO, diffusion of Ge atoms throughout the oxide matrix and formation and growth of Ge-NCs are impacted.
Explore the source record for details and available documents.
Injection process influence on operating behavior of small liquid rockets - Hydrodynamic variables in fuel injection by impinging jets
Highlights: • The gaseous emissions produced by various composting process conditions were characterized and quantified. • Nine compounds were potentially odorous: TMA, NH{sub 3}, 2-pentanone, 1-propanol-2-methyl, acetophenone and sulphur forms. • The tested composting process conditions reduced odour emissions by a factor of 5–10. • A reduction of 10{sup 5} to 10{sup 6} is required to reach an odour threshold limit at peak event emissions. • Both aeration rate and bulking agent had the most impact on reducing odour emissions. - Abstract: Compost sustainability requires a better control of its gaseous emissions responsible for several impacts including odours. Indeed, composting odours have stopped the operation of many platforms and prevented the installation of others. Accordingly, present technologies collecting and treating gases emitted from composting are not satisfactory and alternative solutions must be found. Thus, the aim of this paper was to study the influence of composting process conditions on gaseous emissions. Pig slaughterhouse sludge mixed with wood chips was composted under forced aeration in 300 L laboratory reactors. The process conditions studied were: aeration rate of 1.68, 4.03, 6.22, 9.80 and 13.44 L/h/kg of wet sludge; incorporation ratio of 0.55, 0.83 and 1.1 (kg of wet wood chips/kg of wet sludge), and; bulking agent particles size of <10, 10 < 20 and 20 < 30 mm. Out-going gases were sampled every 2 days and their composition was analysed using gas chromatography coupled with mass spectrometry (GC–MS). Fifty-nine compounds were identified and quantified. Dividing the cumulated mass production over 30 days of composting, by odour threshold, 9 compounds were identified as main potential odour contributors: hydrogen sulphide, trimethylamine, ammonia, 2-pentanone, 1-propanol-2-methyl, dimethyl sulphide, dimethyl disulphide, dimethyl trisulphide and acetophenone. Five gaseous compounds were correlated with both aeration rate and bulking agent to waste ratio: hydrogen sulphide, trimethylamine, ammonia, 2-pentanone and 1-propanol-2-methyl. However, dropping the aeration rate and increasing the bulking agent to waste ratio reduced gaseous odour emissions by a factor of 5–10, when the required threshold dilution factor ranged from 10{sup 5} to 10{sup 6}, to avoid nuisance at peak emission rates. Process influence on emissions of dimethyl sulphide, dimethyl disulphide, dimethyl trisulphide were poorly correlated with both aeration rate and bulking agent to waste ratio as a reaction with hydrogen sulphide was suspected. Acetophenone emissions originated from the wood chips. Olfactory measurements need to be correlated to gaseous emissions for a more accurate odour emission evaluation.
Laser powder bed fusion (LPBF) is an additive manufacturing process that has gained interest for its material fabrication due to multiple advantages, such as the ability to print parts with small feature sizes, good mechanical properties, reduced material waste, etc. However, variations in the key process parameters in LPBF may result in the instantiation of porosity defects and variation in build rate. Particularly, volumetric energy density (VED) is a variable that encapsulates a number of those parameters and represents the amount of energy input from the laser source to the feedstock. VED has been traditionally used to inform the quality of the printed part but different values of VED are presented as optimal values for certain material systems. An optimal VED value can be maintained by changing the key process parameters so that various combinations yield a constant value. In this study, an optimal constant VED value is maintained while printing SS316L with variable key processing parameters. Porosity analysis is performed using optical microscopy, as well as X-ray computed tomography, to reveal the volume density and distribution of those pores. Two primary defect categories are identified, namely lack of fusion and porosity induced by balling defects. The findings indicate that, even at optimal VED, variations in process parameters can significantly influence defect type, underscoring the sensitivity of defect formation to the variation of these parameters. Furthermore, a minor change in the build rate, driven by adjustments in process parameters, was found to influence defect categories. These findings emphasize that fine tuning the process parameters and build rate is essential to minimize defects. Finally, fiducial marks have been identified as a source of unintentional porosity defects. These results enable the refinement of process parameters, ultimately optimizing LPBF to achieve enhanced material density and expedite the printing.
Suspension plasma spray (SPS) is far more complicated than conventional plasma spray and requires a deep knowledge about the influence of process parameters and their correlations. In this study, YSZ coatings were manufactured by SPS with six different process parameters such as plasma power, suspension mass load, original powder size, substrate surface topology, spray distance, and spray step. Afterwards, the porosity of as-prepared coatings was investigated by image method and X-ray transmission technique. A multivariate analysis on the collected experimental data was carried out by employing mathematical statistics methods. The results showed that: 1) Coating porosity has a negative correlation with plasma power and suspension mass load and a positive correlation with the original powder size, spray distance, spray step, and substrate roughness; 2) Spraying distance is the main factor affecting to coating porosity, followed by suspension mass load and substrate surface roughness, respectively. A linear model for porosity prediction was developed and was verified by experiments. The mechanism by which process parameters influence coating porosity is also discussed.
In the present work the effect of different dielectric mediums in micro-EDM of {gamma}-Titanium Aluminide alloy have been investigated. Experiments were conducted both in the absence (dry conditions) and in presence of dielectric (EDM oil).Circular craters were produced both in the presence and absence of dielectric fluid using varying micro-EDM process variables i.e. open circuit voltage, discharge capacitance, pulse frequency and pulse-on-time. Over cut was measured from optical microscope images using Image Analyzer software. Influences of process variables and optimal conditions for minimum over cut on crater dimensions were investigated. ANOVA test which shows that capacitance of RC circuit contributes significantly in crater formation followed by pulse frequency. Optical photographs exhibit that over cut are less in air medium compared to oil medium.
Process-based models have been widely used for hydrologic modeling, and it is a common practice to use sensitivity analysis methods for excluding non-influential hydrologic processes from further investigation and/or model improvement. This study develops a new method called multi-model absolute difference-based sensitivity (MMADS) analysis method to screen non-influential system processes and parameters. MMADS is conceptually similar to the Morris method for addressing parametric uncertainty, but has a unique feature to address both process model uncertainty (i.e., a process may be represented by multiple process models) and process model parameter uncertainty (i.e., parameters associated with a process model are random). MMADS first evaluates absolute differences of a quantity of interest (i.e., a system model output) by varying process models and/or process model parameter values, and then calculates the mean and variance of the differences for investigating process influence. The mean measures overall influence of the process on the quantity of interest, and the variance estimates influence of nonlinear effects of the process and/or its interactions with other processes. MMADS is an extension of the Morris method from a parameter space to a joint parameter-model space for explicitly addressing both process model uncertainty and model parameter uncertainty. The performance of MMADS is evaluated by using two numerical experiments. One experiment is based on Sobol’s G*-function with ten product elements, and has analytical solutions of the MMADS mean and variance of absolute differences. The other experiment is for groundwater flow modeling which considers three processes (i.e., recharge, geology, and snowmelt) that interact with each other. Finally, results indicate that MMADS is computationally efficient and can identify non-influential processes of complex hydrological systems.
Terrestrial processes influence the atmosphere by controlling land-to-atmosphere fluxes of energy, water, and carbon. Prior research has demonstrated that parameter uncertainty drives uncertainty in land surface fluxes. However, the influence of land process uncertainty on the climate system remains underexplored. Here, we quantify how assumptions about land processes impact climate using a perturbed parameter ensemble for 18 land parameters in the Community Earth System Model version 2 under preindustrial conditions. We find that an observationally-informed range of land parameters generate biogeophysical feedbacks that significantly influence the mean climate state, largely by modifying evapotranspiration. Global mean land surface temperature ranges by 2.2°C across our ensemble (σ = 0.5°C) and precipitation changes were significant and spatially variable. Our analysis demonstrates that the impacts of land parameter uncertainty on surface fluxes propagate to the entire Earth system, and provides insights into where and how land process uncertainty influences climate.
Research carried out over the past two decades in which attempts have been made to produce desirable microstructures in immiscible alloys is reviewed. Factors affecting the formation of desirable microstructures in immiscible alloys are addressed and some of the techniques that have been successful in controlling these factors in order to produce useful structures are discussed. Some of the intended applications of these alloys require a dispersion of one phase in the other, while other applications favor the use of aligned, fibrous microstructures with continuity of both phases. The microstructures obtained in immiscible alloys are often strongly influenced by processing conditions. Perhaps the most well known effect is gravity induced sedimentation of the denser immiscible phase during solidification. This difficulty with sedimentation led to low gravity processing in attempts to produce dispersed microstructures. However, experimentation under low gravity conditions soon revealed that many other factors, including wetting of the crucible walls and surface tension driven flows, often resulted in complete separation and coalescence of the two immiscible phases. The production of aligned fibrous microstructures in hypermonotectic alloys appears to be even more difficult than the formation of a dispersion. Here, in addition to sedimentation and crucible wetting, convective and interfacial instabilities must be considered as well. Calculation of the limits of stability during directional solidification were carried out but require experimental verification.
For a complex hydrologic system with multiple processes and process interactions, global sensitivity analysis is often used to identify important or influential parameters for model development and improvement. The identification is complicated by process model uncertainty, when a system process can be represented by multiple process models. This study develops a new total-effect process sensitivity index to identify influential processes under model uncertainty. This is done by extending Sobol's total-effect parameter sensitivity index for one system model to total-effect process sensitivity index for multiple system models to account for uncertainty in process models and model parameters. The total-effect process sensitivity index includes not only the first-order process sensitivity index for measuring the importance of individual processes but also higher-order indices that account for process interactions. The total-effect process sensitivity index can identify an influential process that itself and its interactions with other processes influence a model output. Here, the total-effect process sensitivity index is applied to two numerical examples: (a) Sobol's G*-functions with analytical solutions of first-order and total-effect process sensitivity indices, and (b) groundwater flow models with interactions between recharge, geology, and snowmelt processes. The second evaluation shows that, due to second-order and higher-order process interactions, the first-order and total-effect process sensitivity indices give different process ranking. It is thus necessary to estimate both first-order and total-effect process sensitivity indices to appreciate the difference between the first-order impact of a process alone and the overall total-effect impact of the process itself and its interactions with other processes on a model output.
This paper addresses the application of spray-automated balancing of rotors, and the influence that various operating parameters will have on balancing performance. Spray-automated balancing uses the fuel-air repetitive explosion process to imbed short, discrete bursts of high velocity, high temperature powder into a rotating part at an angle selected to reduce unbalance of the part. The shortness of the burst, the delay in firing of the gun, the speed of the disk and the variability in speed all influence the accuracy and effectiveness of the automated balancing process. The paper evaluates this influence by developing an analytical framework and supplementing the analysis with empirical data obtained while firing the gun at a rotating disk. Encouraging results are obtained, and it is shown that the process should perform satisfactorily over a wide range of operating parameters. Further experimental results demonstrate the ability of the method to reduce vibration levels induced by mass unbalance in a rotating disk.