SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Density of gas orbiting and falling into a black hole for three models with varying accretion rates. The leftmost disk is lowest accretion rate, and the rightmost the highest. All three models are of so-called radiation-supported disks, where the gas is glowing so brightly that the glow of the light emitted pushes the gas away from the black hole, puffing up the accretion disk. Simulations run by Benjamin Ryan.
Abstract In this fifth paper of the series, we use the parameterized, spherically symmetric explosion method PUSH to investigate the impact of eight different nuclear equations of state (EOS). We present and discuss the explosion properties and the detailed nucleosynthesis yields, and predict the remnant (neutron star or black hole) for all our simulations. For this, we perform two sets of simulations. First, a complete study of nonrotating stars from 11 to 40 M ⊙ at three different metallicities using the SFHo EOS; and, second, a suite of simulations for four progenitors (16 M ⊙ at three metallicities and 25 M ⊙ at solar metallicity) for eight different nuclear EOS. We compare our predicted explosion energies and yields to observed supernovae and to the metal-poor star HD 84937. We find EOS-dependent differences in the explosion properties and the nucleosynthesis yields. However, when comparing to observations, these differences are not large enough to rule out any EOS considered in this work.
A push-pull circuit for an opto-electronic device includes: an output node; a pull-up circuit that, in operation, controls a falling edge rate of an input signal to the opto-electronic device while sharing charge with the output node; and a pull-down circuit that, in operation, controls a rising edge rate of the input signal to the opto-electronic device while sharing charge with the output node.
A high-voltage self-aligning push to mate electrical interconnect device is provided. The electrical interconnect device includes a housing with a mating end and a receiving end. The interconnect also includes an insulator bushing configured to be affixed to the receiving end of the housing. The interconnect also includes a center pin disposed within the housing. The center pin extends from the mating end of the housing to the receiving end of the housing. The interconnect also includes a connector socket disposed within the insulator bushing and which is in electrical communication with the center pin. The interconnect also includes an alignment sleeve including a chamfered mating funnel defining a void configured to accept and surround the housing and at least a portion of insulator bushing.
This paper presents an open-source library that pushes the limits of performance portability for irregular General Matrix Multiplication (GEMM) on the widely-used Arm architectures. Our library, autoGEMM, is designed to support a wide range of Arm processors: from edge devices to HPC-grade CPUs. autoGEMM generates optimized kernels for various hardware configurations by auto-combining fragments of autogenerated micro-kernels that employ hand-written optimizations to maximize computational efficiency. We optimize the kernel pipeline by tuning the register reuse and the data load/store overlapping. In addition, we use a dynamic tiling scheme to generate balanced tile shapes. Finally, we position autoGEMM on top of the TVM framework where our dynamic tiling scheme prunes the search space for TVM to identify the optimal combination of parameters for code optimization. Evaluations on five different classes of Arm chips demonstrate the advantages of autoGEMM. For small matrices, autoGEMM achieves 98% of peak and up to 2.0x speedup over state-of-the-art libraries such as LIBXSMM and LibShalom. For irregular matrices (i.e. tall skinny and long rectangles), autoGEMM is 1.3-2.0x faster than widely-used libraries such as OpenBLAS and Eigen. autoGEMM is publicly available at: https://github.com/wudu98/autoGEMM.
A streamlined sample preparation method for nanomechanical testing is needed to improve the quality of specimens, reduce the cost, and increase the versatility of specimen fabrication. This work outlines an in-plane liftout focused ion beam (FIB) fabrication procedure to prepare electron-transparent specimens for in situ transmission electron microscopy (TEM) nanomechanical testing. Ion etching and electron backscatter diffraction (EBSD) techniques were used to lift out a [110] oriented grain from a neutron-irradiated bulk X-750 alloy. Careful control of voltages and currents ensured precision. Top surface thinning sweeps prevented resurfacing and redeposition while dog-bone geometries were shaped with a 1:4 gauge width-to-milling pattern diameter ratio. Nanotensile testing in the TEM with a picoindenter allowed for the estimation of an ultimate tensile strength of 2.41 GPa, and inspection revealed a high density of bubbles in the X-750 matrix. The proposed fabrication procedure is significant for preparing samples from radioactive materials, studying complex structures that are orientation-dependent, and analyzing desired planar areas.
Here, for the first time, we demonstrate a silicon solid-state battery (SSB) architecture that achieves >400 Wh kg −1 , approaching the theoretical limit for silicon-based SSBs. This configuration features a 99.9 wt% micro-Si, a thin sulfide solid electrolyte (SSE), and a high-loading NMC811. Key to these results is strategically selecting and evaluating the processing techniques, whether wet or dry, for the negative electrode, positive electrode and thin sheet-type SSE. Excessive lithium incorporation into the silicon host, beyond the Li 3.75 +Si phase to form a LiSi composite, is essential to match the high capacity of the positive electrode. This SSB achieves over 1000 cycles for a 2 mAh cm −2 with ≈80% capacity retention and 94% capacity retention for 3 mAh cm −2 over 500 cycles at 25 °C. Post analysis identifies the primary capacity decay mechanisms as oxidation at the NMC/SSE interface and structural disruptions within NMC. Meanwhile, the Si electrode maintains a robust solid-electrolyte interphase layer, minimizing capacity decay. This study highlights the necessity for improved NMC coatings, lattice oxygen stabilization, and a durable positive electrode-electrolyte interface to improve the long-term stability of SSBs. Strategies leading to a single-layer pouch cell SSB exceeding 400 Wh kg −1 are developed.
Abstract The commercialization of lithium–sulfur (Li−S) batteries is still hindered by the unsatisfactory cell performance under practical working conditions, which is mainly caused by the sluggish cathode redox kinetics, severe polysulfide shuttling, and poor Li stripping/plating reversibility. Herein, we report an effective strategy by combining Se‐doped S hosted in an ordered macroporous framework with a highly fluorinated ether (HFE)‐based electrolyte to simultaneously address the aforementioned issues in both cathode and anode. A reversible and stable high areal capacity of >5.4 mAh cm −2 with high Coulombic efficiency >99.2 % can be achieved under high areal Se/S loading (5.8 mg cm −2 ), while the underlying mechanism was further revealed through synchrotron X‐ray probes and Time‐of‐Flight Secondary Ion Mass Spectrometry (ToF‐SIMS). The practical application potential was further evaluated at low (0 °C) and high (55 °C) temperatures under high areal Se/S loading (>5.0 mg cm −2 ) and thin Li metal (40 μm).
The commercialization of lithium-sulfur (Li-S) batteries is still hindered by the unsatisfactory cell performance under practical working conditions, which is mainly caused by the sluggish cathode redox kinetics, severe polysulfide shuttling, and poor Li striping/platting reversibility. We reported an effective strategy by combining Se-doped S hosted in an ordered macroporous framework with highly fluorinated ether (HFE)-based electrolyte to simultaneously address the aforementioned issues in both cathode and anode. A reversible and stable high areal capacity of > 5.4 mAh cm -2 with high coulombic efficiency > 99.2% can be achieved under high areal Se/S loading (5.8 mg cm -2 ), while the underlying mechanism was further revealed through synchrotron X-ray probes and Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS). The practical application potential was further evaluated at low (0 °C) and high (55 °C) temperatures under high areal Se/S loading (> 5.0 mg cm -2 ) and thin Li metal (40 µm).
New insight into the geochemistry of ancient environments can be gained through structural and chemical analyses of nanometer-scale features within minerals. Here, we present recent developments using atom probe tomography (APT) enabling direct visualization of nanoscale fluid inclusions trapped within pyrite (FeS 2 ) and thereby chemical characterization of remnant seawater. Pyrite framboids (spherical clusters of nanocrystals) were sampled from the Middle Devonian Leicester Pyrite Member (New York). Scanning transmission electron microscopy shows low density regions distributed within the pyrite consistent with nanoscale pores (<4 nm in size). APT 3D visualization and compositional mapping reveals that the nanopores are filled with water. The inclusions appear to preserve the elemental signature of the water column in which the framboids formed, specifically seawater components including Na, K, Mg, and Ca. Mg/Ca ratios within the pyrite were generally measured to be within 0.6±0.2 – consistent with calcite-dominated seawater conditions existing in the Middle Devonian. Furthermore, this study demonstrates the potential for a novel approach to reconstruct paleoenvironmental conditions from coupled elemental and structural analyses of nanoscale fluid inclusions.
Here, the adsorption of atomic H and H 2 on copper mono- and submonolayers supported on hexagonal WC(0001) surfaces has been investigated using density functional theory with the Perdew–Burke–Ernzerhof exchange correlation functional and D2 van der Waals corrections. Results evidence the impact of the termination of the carbide substrate on fundamental properties of Cu adatoms, and, hence, on the stability of molecular and atomic hydrogen, defining copper's catalytic activity for hydrogen evolution reaction. Using H adsorption energy as a descriptor, catalytic activity of Cu adlayers for hydrogen evolution reaction was estimated using traditional volcano curves and a curve, obtained at low hydrogen coverage. Obtained results evidence that copper adlayers supported on the WC may present a viable low-cost alternative to noble metal-based catalysts, with improved catalytic activity compared to that of copper. This, potentially, can be a useful basis for designing and developing novel functional materials with predetermined catalytic properties.
When faced with illness, Sudanese patients have traditionally relied primarily on folklore healers. In the recent past, Sudan increased its health care spending and placed ever-greater importance on medical education. Although traditional remedies still play an important role, Sudanese patients increasingly consult conventional medicine. Not only infectious diseases but also a rising burden of noncommunicable conditions, including cancer, represent major health care challenges. Therefore, Sudan will need to make the best out of the limited resources available and further increase investment in health care to confront these trends successfully. Sudan was one of the first African countries to recognize the importance of radiation oncology in multidisciplinary cancer care and began investing in it in the 1960s. Today, there are 4 comprehensive cancer centers in the country, which offer radiation therapy and employ 10 radiation therapy machines for a population of about 45 million people. This proportion is an indication that Sudan still has an underfunded health care system with a lack of infrastructure and human resources. The present manuscript intends to provide a well-rounded overview of radiation oncology in Sudan today.
Increasing the energy density of energy storage devices is currently the key target of many battery and supercapacitor research activities. For both types of devices, the electrochemical stability window (ESW) determines the effective energy density of the device. ESWs are defined by the effective oxidation and reduction potentials of the electrolyte, which are controlled by many various factors, including the HOMO/LUMO (highest/lowest unoccupied molecular orbital) energies of the electrolyte molecules, the nature of the electrode/electrolyte interphases, and other physicochemical properties. The concentration of the electrolyte would affect the HOMO/ LUMO levels thus also change the ESW. A higher concentration of salt induces specific arrangements among the anion, cation, and solvent molecules of an electrolyte, altering the bulk behavior of the electrolyte, resulting in drastic change in the electrode interfaces. These uniquely modified physicochemical properties extend the ESW in several different ways, including the enhancement in the kinetic stability of the electrodes, as well as the thermodynamic and Nernst shifts of the oxidation/reduction potentials of the electrolyte. For organic electrolytes, it is the reduced amount of free solvent molecules that plays the key role in such changes; whereas for aqueous electrolytes, it is the scarcity of free water molecules and the reduced water activity that control the key properties of the electrolyte. Here, we focus on elucidating the fundamental structural changes occurring within an electrolyte system with increasing salt concentrations. The underlying mechanisms which not only facilitates the extension of the ESW, but also enables higher rate capabilities and mitigates aluminum dissolution for batteries with organic electrolytes, are meticulously explained. Further, we thoroughly discuss the importance of high-voltage stability in aqueous battery systems by exploiting the changed properties observed with higher concentrations of salts. To finish, high-voltage supercapacitors enabled by superconcentrated electrolytes are also explored.
We review the progress in atomic structure theory with a focus on superheavy elements and their predicted ground state configurations important for an element’s placement in the periodic table. To understand the electronic structure and correlations in the regime of large atomic numbers, it is essential to correctly solve the Dirac equation in strong Coulomb fields, and to take into account quantum electrodynamic effects. We specifically focus on the fundamental difficulties encountered when dealing with the many-particle Dirac equation. We further discuss the possibility for future many-electron atomic structure calculations going beyond the critical nuclear charge $Z_{crit}≈170$, where levels such as the $1s$ shell dive into the negative energy continuum ($E_{nκ} < –m_{e}c^2$). The nature of the resulting Gamow states within a rigged Hilbert space formalism is highlighted.
Abstract not provided
Some organisms in nature that undergo anaerobic respiration utilize 1D nanoscale arrays of densely packed cytochromes containing the molecule heme. The assemblies can be mimicked with 1D nanoscale fibrils composed of peptide amphiphiles designed to coordinate heme in dense arrays. To create such materials and assemblies it is critical to understand the assembly process and what controls the various aspects of hierarchical assembly. MD simulations suggest that shorter alkyl chains on the peptide lead to more dynamic structures than the peptides with longer chains that yield kinetically trapped states. The hydration parameters manifest themselves experimentally through the observation of a dual pH trigger which controls the peptide assembly rate, the heme binding affinity, and heme organization kinetics. Great strides in understanding the relative complexity of the self-assembly process in relation to incorporating a functional moiety like heme opens up many possibilities in developing abiotic assemblies for bioelectronic devices and assemblies