Search NASA⌕ Search

SEARCH · Search NASA

Results for “safety visualization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Correlation of Qualification and Accelerated Testing with Field Degradation

Qualification testing of solar photovoltaic (PV) modules per IEC 61215 standard encompasses a set of well-defined accelerated stress tests (irradiation, environmental, mechanical and electrical) with strict pass/fail criteria based on functionality/performance, electrical and mechanical safety, and visual requirements. The qualification testing does not identify all the possible reliability failures or durability issues witnessed in the actual field. However, it does identify the major/catastrophic design quality issues (infant mortality), which could occur early in a module’s field life. Unfortunately, in the industry, there is no consensus-based standard or protocol available to validate manufacturers’ warranty period claims based on the end-of-life wear-out failure mechanisms. Being able to predict the field degradation rates and lifetime using mode-specific accelerated tests on moderately field-aged modules, for example 10 years, for certain commonly occurring degradation modes would be a powerful contribution to all the stakeholders of the PV industry. There is a need to formulate guidelines to find the correlation of accelerated testing with field degradation for individual degradation modes observed in the field. Potential approaches to fulfill this need were experimented in this project and are presented in this report. Two of the most commonly seen degradation modes – encapsulant browning and solder bond thermomechanical fatigue – are addressed in this report through presenting the accelerated testing methods and physical modelling approaches. Two accelerated test methods (UV and thermal cycling) were designed to induce the wear-out mechanisms in the modules and not infant mortality failures. To focus on the wear-out failure modes, the tests were performed on field-aged modules, instead of fresh modules, with known degradation rates and degradation modes. The degradation rates were measured based on the degradation rates of individual cell parameters (short-circuit current, I sc and series resistance, R s ) instead of the degradation rate of maximum power (P max ) which cannot be used to study any specific/limited degradation mode as the P max degradation could be caused by many different degradation modes. The key characteristic parameter considered for encapsulant discoloration and solder bond degradation is I sc and R s , respectively. The developed physical models/equations relating the testing degradation data and field weather data were utilized to determine the acceleration factor (AF) and to predict the degradation rate for a specific degradation mode of PV modules installed in two different climates, Arizona (hot) and New York (cold). The predicted degradation rates for encapsulant browning and solder bond degradation have also been validated against the actual measured field degradation rates. UV testing cost reduction: To determine acceleration factor, single UV chamber was used for accelerated UV testing at three different temperatures simultaneously, instead of three chambers for three temperatures (or one chamber sequentially which is an extremely time-consuming approach). A passive heating approach was successfully used to achieve and maintain multiple temperatures in the accelerated UV chamber. Foam insulation boards of varying thicknesses were utilized to obtain three different temperatures for UV testing. However, these foam materials tend to disintegrate in the presence of moisture. To alleviate this problem, silicone heating blankets with temperature controls and humidifier can be used if the UV testing is to be performed under hot-humid conditions instead of conventional hot-dry conditions. Thermal cycling testing cost reduction: Single thermal cycling chamber was used for accelerated thermal cycling testing at three different upper temperatures simultaneously, instead of three chambers for three upper temperatures (or one chamber sequentially which is an extremely time-consuming approach). An active heating approach based on silicone heating blankets was successfully used to achieve and maintain multiple upper temperatures in the accelerated thermal cycling chamber. Such blankets provide stable temperature control and thereby more reliable and repeatable for replicate experiments.

14 SOLAR ENERGY↗

The Economic and Societal Impact of Baseload Power Generation on Local Communities

In the United States (US), energy from coal, natural gas, and nuclear power plants produced approximately 3,500 TWh of electricity and accounted for 85% of total net generation in 2015. In 2015, coal and natural gas power plants each contributed about 33% of all generation in the US. generation II nuclear power plants represents about 20% of all electricity produced in the US and 62.4% of emission-free electricity in 2015. As a byproduct of electricity, combustion fossil fuel plants release hazardous emissions such as CO{sub 2}, N{sub 2}O, NOx and SO{sub 2}. CO{sub 2}, CH{sub 4}, and N{sub 2}O. Many of these emissions are major greenhouse gases (GHG) that have been linked to contributing to global climate change. The release of NOx and SO{sub 2} have a negative impact on human health and contribute to smog and acid rain. As a result, communities are often subjected to negative externalities such as pollution, noise, undesirable visuals, and safety concerns when sited near power plants. Though nuclear power plants do not produce any air emissions, there are concerns of nuclear waste, radiation leaks into the environment, and Fukushima-level accidents. With electricity generation, there are economic, safety, and environmental tradeoffs between the three technologies. These factors can contribute to negative and positive externalities for communities that are sited near baseload power plants. Davis (2010) using the hedonic price method found that communities living within 2 miles of power plants experience a 3-7% decrease in housing values. There is further evidence that those that live even closer experience larger decreases. While several studies focus on hedonic price methods and health effects, none have investigated and compared the socioeconomic indicators of communities near baseload power plants. The goal of this work is to investigate and examine relationship between societal and economic community indicators with respect to distance and generation technology. From a cost benefit standpoint an argument can be made based on the externalities from these power plants. Positive externalities that improve median incomes and home values could mean added tax revenue for local municipalities and governments. Typically, comparisons between generating technologies are made using the levelized cost of electricity (LCOE) and life cycle GHG emissions, however the impacts on local communities can also be used as a metric when comparing technologies. (authors)

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Flight Deck Technologies to Enable NextGen Low Visibility Surface Operations

Many key capabilities are being identified to enable Next Generation Air Transportation System (NextGen), including the concept of Equivalent Visual Operations (EVO) . replicating the capacity and safety of today.s visual flight rules (VFR) in all-weather conditions. NASA is striving to develop the technologies and knowledge to enable EVO and to extend EVO towards a Better-Than-Visual operational concept. This operational concept envisions an .equivalent visual. paradigm where an electronic means provides sufficient visual references of the external world and other required flight references on flight deck displays that enable Visual Flight Rules (VFR)-like operational tempos while maintaining and improving safety of VFR while using VFR-like procedures in all-weather conditions. The Langley Research Center (LaRC) has recently completed preliminary research on flight deck technologies for low visibility surface operations. The work assessed the potential of enhanced vision and airport moving map displays to achieve equivalent levels of safety and performance to existing low visibility operational requirements. The work has the potential to better enable NextGen by perhaps providing an operational credit for conducting safe low visibility surface operations by use of the flight deck technologies.

Prinzel, Lawrence (Lance) J., III↗

(ODIN): An Open Source, Low-Latency Data Integration & Visualization Framework for the NASA System Wide Safety Project's Disaster Response Safety Demonstration Series

The Open Data Integration Framework (ODIN) is an open source, low latency data integration and visualization framework (https://github.com/NASARace/race-odin) developed under NASA’s System WideSafety Program to demonstrate new safety capabilities designed to improve US airspace operations. Safety demonstrations are a set of increasingly complex (from public safety perspective) disaster response scenarios under which air systems must operate with increased capacity and include: 1) Wildland fire response, 2) Hurricane relief and recovery, 4) Emergency medical delivery via UAS and 4) Urban disaster relief. To accommodate disaster response, ODIN is field deployable and can scale on one or more multi-core, commodity laptops operating with full to limited or intermittent internet connectivity, conditions likely encountered during operations. ODIN runs as webserver with local, persistent data storage to serve either public or a secured, ad hoc network (e.g., an incident command post). The current released ODIN, ODIN-Fire is tailored for wildland fire management incorporating information on satellite overpasses with links to the near real-time data and imagery from the respective agencies. Included are winds data, an important variable for emergency responders and airspace operations, and high-resolution wind forecasts generated by super-computing resources and ingested into ODIN. As an open-source project, ODIN has attracted interest from multiple entities. We will show how 1) a commercial field instrument and data provider uses ODIN to help users visualize, publish and integrate their in-situ sensor network data and 2) ODIN’s capabilities to ingest, integrate and display near-real time satellite data with air traffic and a USFS winds forecast model used in fire response and post-fire assessment. Within NASA ODIN demonstrated novel, near terminal airspace safety capabilities for a project close-out event and previously it monitored the national airspace in real-time to meet an agency milestone. ODIN is presently under development for the anticipated hurricane relief and response demonstration notionally scheduled for the 2025-27 time frame and is available from NASA's github at the above link.

Aeronautics↗

Better-Than-Visual Technologies for Next Generation Air Transportation System Terminal Maneuvering Area Operations

A consortium of industry, academia and government agencies are devising new concepts for future U.S. aviation operations under the Next Generation Air Transportation System (NextGen). Many key capabilities are being identified to enable NextGen, including the concept of Equivalent Visual Operations (EVO) replicating the capacity and safety of today's visual flight rules (VFR) in all-weather conditions. NASA is striving to develop the technologies and knowledge to enable EVO and to extend EVO towards a Better-Than-Visual (BTV) operational concept. The BTV operational concept uses an electronic means to provide sufficient visual references of the external world and other required flight references on flight deck displays that enable VFR-like operational tempos and maintain and improve the safety of VFR while using VFR-like procedures in all-weather conditions. NASA Langley Research Center (LaRC) research on technologies to enable the concept of BTV is described.

Prinzel, Lawrence J., III↗

Safety Analytics Forecasting and Evaluation Reporting (SAFER)

The SAFER Sandbox is a web application for testing various types of data visualization tools that analyze safety data across national laboratories. By enabling the user to visualize this data through visual and textual analyses, the SAFER Sandbox helps to facilitate the research and support for the National Nuclear Security Administration (NNSA) Office of Safety, Infrastructure and Operations (NA-50). Safety data across the national laboratory complex is not currently analyzed in one location. This prohibits administrators from viewing safety data trends and making large scale decisions based on a holistic view of the data. By implementing data analytics web services such as representative text summary, noun phrase extraction and graph exploration, users can view and explore safety data based on search queries. The data visualizations in the SAFER Sandbox reveal trends and point to items of concern based on safety data. The SAFER Sandbox is a testing ground for these visualizations.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Safety Case for Small Uncrewed Aircraft Systems (sUAS) Beyond Visual Line of Sight (BVLOS) Operations at NASA Langley Research Center

This Technical Memorandum (TM) is written to provide for dissemination of the methods and safety considerations for operations of small Uncrewed Aerial Systems (sUAS) Beyond Visual Line-of-Sight (BVLOS)at NASA Langley Research Center. It includes the Safety Case used to acquire a BVLOS Certificate of Authorization (COA) from the FAA and is being published to enable others to benefit from this work. The intended operations, subject to approval from the Federal Aviation Administration (FAA) and the National Aeronautics and Space Administration (NASA), will include a combination of Within Visual Line of Sight (WVLOS) and Beyond Visual Line of Sight (BVLOS) flights, comprising of at most five sUAS operating concurrently, with no more than three operating BVLOS. Flights will occur in a subset of the Langley Air Force Base (LAFB) Class D airspace (KLFI) at a maximum altitude of 400 ft AGL. Most operations within this subset will take place in the City Environment Range Testing for Autonomous Integrated Navigation (CERTAIN) Range. The CERTAIN Range includes airspace inside the borders of NASA Langley Research Center (LaRC). Additional airspace over the northern section of CERTAIN will be requested as part of the Certificate of Authorization (COA). NASA LaRC BVLOS operations on the CERTAIN Range can be broken down into five critical components needed to meet the 14 CFR § 91.113 see and avoid requirement: 1) procedural deconfliction with LAFB for UAS operations at or below 400 ft and manned aircraft at or above 900’ AGL; 2) ground equipment for detection of intruder aircraft and to support communications between crewmembers ; 3) sUAS vehicles with advanced onboard automation capable of autonomously maintaining safe separation; 4) BVLOS standardized operating procedures (SOPs); 5) and personnel to execute the flight operations in accordance with the SOPs and respond to airborne contingencies. The introduction of new ground equipment includes the use of the Remote Operations for Autonomous Missions (ROAM) UAS Operations Center, development and use of an Integrated Airspace Display (IAD), use of the L-STAR and GA-9120 radars, and the incorporation of standardized Vertiports. The ROAM Operations Center will be the central point for all BVLOS sUAS operations. All command and control (C2), voice communications and airspace awareness displays will reside inside ROAM. The IAD will provide raw data from ADS-B, FLARM, radar tracks and telemetered GPS vehicle positions for interpretation by an Airspace Monitor. The radars will search the class D airspace around the CERTAIN Range and serve as a backup to procedural deconfliction procedures coordinated with LAFB. In the event of a procedural deconfliction breakdown, radar detections of non-participating aircraft will be available so that the 91.113 see and avoid requirement can still be safely met. Finally, the incorporation of Vertiports will have video and network connectivity that enables large numbers of sUAS launches and recoveries from a single location. This is a continuation of the remote command and control of unpiloted aircraft component focused on evaluating unpiloted aircraft flight crew roles and responsibilities, control interfaces and the associated data links needed to operate a fleet of aircraft within a UAM Ecosystem. This work supports the development of future aviation operational concepts based on an Urban Air Mobility Maturity Level (UML) 4 environment (Patterson, 2020). It is assumed that future airspace will include hundreds of simultaneous aircraft operations within the airspace, therefore scalable operations are essential for enabling this future airspace to become a reality. Follow on work includes envisioned flights that expand operations beyond the CERTAIN range and lead to an effective Maritime Surveillance capability.

Matthew W Coldsnow↗

Evaluation of Visualization Using a 50/50 (Contrast Media/Glucose 5% Solution) Technique for Radioembolization as an Alternative to a Standard Sandwich Technique

BackgroundRadioembolization (RE) with {sup 90}yttrium ({sup 90}Y) resin microspheres generally employs a sandwich technique with separate sequential administration of contrast medium (CM), followed by vehicle (e.g., glucose 5% [G5] solution), then {sup 90}Y resin microspheres (in G5), then G5, and then CM again to avoid contact of CM and microspheres under fluoroscopic guidance. This study evaluates the visualization quality and safety of a modified sandwich technique with a 50/50-mixture of CM (Imeron 300) and G5 for administration of {sup 90}Y resin microspheres.Materials and MethodsA retrospective analysis of 81 RE procedures in patients with primary or secondary liver tumors was performed. The quality of angiographic visualization of the hepatic vessels was assessed before the first injection and immediately before the whole dose has been injected. Visualization and flow rate were graded on a 5-point scale: 1 = very good to 5 = not visible/no antegrade flow. Univariate logistic regression models and multiple linear regression models were used to evaluate the prognostic variables associated with visualization and flow scores.ResultsVisualization quality was inversely related to flow rate, the lower the flow rate the better the grade of the visualization. Visualization quality was also inversely related to body-mass-index (BMI). Performing RE with the 50/50-CM/G5 mixture resulted in a mean injection time for 1 GBq of 15 min. No clinically significant adverse events, including radiation-induced liver disease were reported.ConclusionRE with a 50/50-mixture of CM and G5 for administration of {sup 90}Y resin microspheres in a modified sandwich technique is a safe administration alternative and provides good visualization of hepatic vessels, which is inversely dependent on flow rate and BMI. Injection time was reduced compared with our experience with the standard sandwich technique.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Assistive Detect and Avoid Technology in Urban Air Mobility Environments

The use of Assistive Detect and Avoid (Assistive DAA or ADAA) technology in Urban Air Mobility (UAM) environments poses potential benefits as well as challenges. Assistive DAA refers to the leveraged use of DAA technology, originally developed to replace see-and-avoid capabilities for remotely piloted aircraft, in onboard-piloted aircraft to augment (rather than replace) pilots’ see-and-avoid abilities and thus enhance the safety and efficiency of visual flight operations. ADAA is anticipated to be especially safety-enhancing in airspace where traffic density is high or traditional air traffic services are limited, such as in future UAM environments. ADAA may also enable higher-tempo UAM operations than with only see-and-avoid capabilities, while still maintaining acceptable levels of safety. UAM concepts under development by the FAA, NASA, and industry focus on operations moving people and cargo in urban and suburban areas using innovative technologies, operations, and aircraft, including electric vertical takeoff and landing (eVTOL) aircraft. Researchers at NASA Langley Research Center, in collaboration with FAA researchers at the William J. Hughes Technical Center in Atlantic City, NJ, have conducted a series of medium-fidelity, human-in-the-loop research simulations of potential future UAM operations and concepts in both Class C and Class B airspace environments. These simulations have included use of a Langley-developed ADAA research tool called DANTi, which enables configurable ADAA displays to be presented to pilots of simulated eVTOL aircraft participating in higher-density and higher-tempo UAM operations. Experience and observations made during testing of the NASA-developed DANTi ADAA capability in the UAM NFLITE simulation environment will be reported in this paper together with a discussion of airspace integration and regulatory topics.

Detect and Avoid↗

Assistive Detect and Avoid Technology in Urban Air Mobility Environments

The use of Assistive Detect and Avoid (Assistive DAA or ADAA) technology in Urban Air Mobility (UAM) environments poses potential benefits as well as challenges. Assistive DAA refers to the leveraged use of DAA technology, originally developed to replace see-and-avoid capabilities for remotely piloted aircraft, in onboard-piloted aircraft to augment (rather than replace) pilots’ see-and-avoid abilities and thus enhance the safety and efficiency of visual flight operations. ADAA is anticipated to be especially safety-enhancing in airspace where traffic density is high or traditional air traffic services are limited, such as in future UAM environments. ADAA may also enable higher-tempo UAM operations than with only see-and-avoid capabilities, while still maintaining acceptable levels of safety. UAM concepts under development by the FAA, NASA, and industry focus on operations moving people and cargo in urban and suburban areas using innovative technologies, operations, and aircraft, including electric vertical takeoff and landing (eVTOL) aircraft. Researchers at NASA Langley Research Center, in collaboration with FAA researchers at the William J. Hughes Technical Center in Atlantic City, NJ, have conducted a series of medium-fidelity, human-in-the-loop research simulations of potential future UAM operations and concepts in both Class C and Class B airspace environments. These simulations have included use of a Langley-developed ADAA research tool called DANTi, which enables configurable ADAA displays to be presented to pilots of simulated eVTOL aircraft participating in higher-density and higher-tempo UAM operations. Experience and observations made during testing of the NASA-developed DANTi ADAA capability in the UAM NFLITE simulation environment will be reported in this paper together with a discussion of airspace integration and regulatory topics.

Detect and Avoid↗

Improving Efficiency with 3-D Imaging: Technology Essential in Removing Plutonium Processing Equipment from Plutonium Finishing Plant Gloveboxes

The Plutonium Finishing Plant at Hanford, Washington began operations in 1949 to process plutonium and plutonium products. Its primary mission was to produce plutonium metal, fabricate weapons parts, and stabilize reactive materials. These operations, and subsequent activities, were performed in remote production lines, consisting primarily of hundreds of gloveboxes. Over the years these gloveboxes and processes have been continuously modified. The plant is currently inactive and Fluor Hanford has been tasked to clean out contaminated equipment and gloveboxes from the facility so it can be demolished in the near future. Approximately 100 gloveboxes at PFP have been cleaned out in the past four years and about 90 gloveboxes remain to be cleaned out. Because specific commitment dates for this work have been established with the State of Washington and other entities, it is important to adopt work practices that increase the safety and speed of this effort. The most recent work practice to be adopted by Fluor Hanford D&D workers is the use of 3-D models to improve the efficiency of cleaning out radioactive gloveboxes at the plant. The use of 3-D models has significantly improved the work planning process by providing workers with a clear image of glovebox construction and composition, which is then used to determine cleanout methods and work sequences. The 3-D visual products enhance safety by enabling workers to more easily identify hazards and implement controls. In addition, the ability to identify and target the removal of radiological materials early in the D&D process provides substantial dose reduction for the workers.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Conflict Alerts for Aircraft Conducting Visual Approaches

It is common for aircraft to conduct visual and instrument final approaches to a single runway or multiple parallel runways. Useful, nonexcessive safety alerts on aircraft conducting visual approaches are helpful to air traffic controllers, though pilots are responsible for separation with the preceding aircraft. A variety of visual approaches to various runway configurations are studied, and a set of safety alert thresholds is proposed. Fast-time simulations with recorded real-world air traffic data of mostly visual approach flights are performed on a prototype tactical separation assurance system for terminal airspace. Alerts are generated -- with both the standard separation thresholds and the proposed safety alert thresholds -- and compared with those from the Conflict Alert (CA) functionality in the Standard Terminal Automation Replacement System (STARS). The results show that the number of Mode-C Intruder alerts generated was reduced 76% as compared to STARS CA. The nuisance alerts generated by assuming visual to be instrument approaches was reduced by 92% when the proposed safety alert thresholds were used and visual approaches were assumed.A set of safety alert thresholds, which allow safety alerts to be provided to the controllers for aircraft conductingvisual approaches to a single runway or multiple parallel runways, has been proposed based on input from SubjectMatter Experts as well as visual approach procedures and common practices. The goal is to maximize the thresholdswithin the guidance of the procedures and common practices and to minimize the number of nuisance alerts and totalnumber of alerts with the support of flight intent information. Tests have been performed using a recently developedprototype tactical separation assurance system for terminal airspace, called Terminal Tactical Separation-AssuredFlight Environment (T-TSAFE). The input was a full day of air traffic data from Dallas/Fort Worth (DFW) TRACONwith most arriving flights conducting visual approaches. The results compare favorably with those of the ConflictAlert (CA) functionality of the Standard Terminal Automation Replacement System (STARS).When fast-time simulation experiment was performed using T-TSAFE with all arriving flights assumed to conductinstrument approaches, the expected large number of separation alerts were observed. When compared with STARSCA, the conflict pairs common to both T-TSAFE and STARS CA was only 21% of the total STARS CA alerts. As aresult, the nuisance-alert rate for STARS CA was estimated to be about 70%, which is comparable to a similar previously estimation of 80% nuisance-alert rate for CARTS (Common Automated Radar Terminal System) CA. The Mode-CIntruder (MCI) alerts were also reduced by 76% as compared to STARS CA.Examination of the common conflict pairs between T-TSAFE and STARS CA shows that they are valid separationconflicts with good alert lead times for T-TSAFE. However, many of them would still be considered nuisance alertsif the aircraft were conducting visual approaches. This was confirmed by another visual approach fast-time simulationT-TSAFE experiment, in which all DFW arriving flights were assumed to be on visual approaches and our proposedsafety alert thresholds were used and tested. The result of the experiment showed that the number of non-MCI alertswas less by 92% as compared to the number when all DFW arrivals were assumed to be conducting instrumentapproaches. The common conflict pairs involving aircraft conducting visual approaches to parallel runways werereduced by 93% as well. Thus, the flight intent information and the safety alert thresholds are effective in reducingnuisance alerts.T-TSAFE can thus provide separation and safety conflict alerts seamlessly in the real-world environment of mixedterminal operations with arriving flights of both visual and instrument approaches. Compared with STARS CA, TTSAFEhas fewer false alerts, larger alert lead time, and larger alert thresholds. While the nuisance alerts are reducedsignificantly with the safety alert thresholds, further work is needed to study if the alert lead time for safety alerts issufficient.

Tang, Huabin↗

System safety management: A new discipline

The systems theory is discussed in relation to safety management. It is suggested that systems safety management, as a new discipline, holds great promise for reducing operating errors, conserving labor resources, avoiding operating costs due to mistakes, and for improving managerial techniques. It is pointed out that managerial failures or system breakdowns are the basic reasons for human errors and condition defects. In this respect, a recommendation is made that safety engineers stop visualizing the problem only with the individual (supervisor or employee) and see the problem from the systems point of view.

W. C. Pope↗

A Conceptual Aerospace Vehicle Structural System Modeling, Analysis and Design Process

A process for aerospace structural concept analysis and design is presented, with examples of a blended-wing-body fuselage, a multi-bubble fuselage concept, a notional crew exploration vehicle, and a high altitude long endurance aircraft. Aerospace vehicle structures must withstand all anticipated mission loads, yet must be designed to have optimal structural weight with the required safety margins. For a viable systems study of advanced concepts, these conflicting requirements must be imposed and analyzed early in the conceptual design cycle, preferably with a high degree of fidelity. In this design process, integrated multidisciplinary analysis tools are used in a collaborative engineering environment. First, parametric solid and surface models including the internal structural layout are developed for detailed finite element analyses. Multiple design scenarios are generated for analyzing several structural configurations and material alternatives. The structural stress, deflection, strain, and margins of safety distributions are visualized and the design is improved. Over several design cycles, the refined vehicle parts and assembly models are generated. The accumulated design data is used for the structural mass comparison and concept ranking. The present application focus on the blended-wing-body vehicle structure and advanced composite material are also discussed.

Mukhopadhyay, Vivek↗

Veggie Hardware Validation Test Preliminary Results and Lessons Learned

The Veggie hardware validation test, VEG-01, was conducted on the International Space Station during Expeditions 39 and 40 from May through June of 2014. The Veggie hardware and the VEG-01 experiment payload were launched to station aboard the SpaceX-3 resupply mission in April, 2014. Veggie was installed in an Expedite-the-Processing-of-Experiments-to-Space-Station (ExPRESS) rack in the Columbus module, and the VEG-01 validation test was initiated. Veggie installation was successful, and power was supplied to the unit. The hardware was programmed and the root mat reservoir and plant pillows were installed without issue. As expected, a small amount of growth media was observed in the sealed bags which enclosed the plant pillows when they were destowed. Astronaut Steve Swanson used the wet/dry vacuum to clean up the escaped particles. Water insertion or priming the first plant pillow was unsuccessful as an issue prevented water movement through the quick disconnect. All subsequent pillows were successfully primed, and the initial pillow was replaced with a backup pillow and successfully primed. Six pillows were primed, but only five pillows had plants which germinated. After about a week and a half it was observed that plants were not growing well and that pillow wicks were dry. This indicated that the reservoir was not supplying sufficient water to the pillows via wicking, and so the team reverted to an operational fix which added water directly to the plant pillows. Direct watering of the pillows led to a recovery in several of the stressed plants; a couple of which did not recover. An important lesson learned involved Veggie's bellows. The bellows tended to float and interfere with operations when opened, so Steve secured them to the baseplate during plant tending operations. Due to the perceived intensity of the LED lights, the crew found it challenging to both work under the lights and read crew procedures on their computer. Although the lights are not a safety hazard, for visual comfort crewmembers were advised to wear sunglasses when working with the plants and then they can lift glasses to read procedures. Steve Swanson had already trail-blazed this procedure when he initiated VEG-01. The temperature and humidity data logger was relocated mid-experiment to provide measurements on both sides of the unit. Images of the plants were downlinked weekly, and videos of installation and harvest were recorded. This imaging frequency was not sufficient to monitor and respond to changes in plant growth. Plants, samples, and data loggers will be returned on SpaceX-4, scheduled to return the fall of 2014. Lessons learned will be translated into hardware and operational modifications for future Veggie payloads.

International Space Station↗

Toward Head-Worn Displays for Equivalent Visual Operations

The Next Generation Air Transportation System represents an envisioned transformation to the U.S. air transportation system that includes an "equivalent visual operations" (EVO) concept, intended to achieve the safety and operational tempos of Visual Flight Rules (VFR) operations independent of visibility conditions. Today, Federal Aviation Administration regulations provide for the use of an Enhanced Flight Visual System (EFVS) as "operational credit" to conduct approach operations below traditional minima otherwise prohibited. An essential element of an EFVS is the Head-Up Display (HUD). NASA has conducted a substantial amount of research investigating the use of HUDs for operational landing "credit", and current efforts are underway to enable manually flown operations as low as 1000 feet Runway Visual Range (RVR). Title 14 CFR 91.175 describes the use of EFVS and the operational credit that may be obtained with airplane equipage of a HUD combined with Enhanced Vision (EV) while also offering the potential use of an “equivalent” display in lieu of the HUD. A Head-Worn Display (HWD) is postulated to provide the same, or better, safety and operational benefits as current HUD-equipped aircraft but for potentially more aircraft and for lower cost. A high-fidelity simulation was conducted that examined the efficacy of HWDs as "equivalent" displays. Twelve airline flight crews conducted 1000 feet RVR approach and 300 feet RVR departure operations using either a HUD or HWD, both with simulated Forward Looking Infra-Red cameras. The paper shall describe (a) quantitative and qualitative results, (b) a comparative evaluation of these findings with prior NASA HUD studies, and (c) describe current research efforts for EFVS to provide for a comprehensive EVO capability.

Prinzel, Lawrence (Lance) J., III↗

Long Duration Head-Down Tilt Bed Rest Studies: Safety Considerations Regarding Vision Health

Visual symptoms reported in astronauts returning from long duration missions in low Earth orbit, including hyperopic shift, choroidal folds, globe flattening and papilledema, are thought to be related to fluid shifts within the body due to microgravity exposure. Because of this possible relation to fluid shifts, safety considerations have been raised regarding the ocular health of head-down tilt (HDT) bed rest subjects. HDT is a widely used ground ]based analog that simulates physiological changes of spaceflight, including fluid shifts. Thus, vision monitoring has been performed in bed rest subjects in order to evaluate the safety of HDT with respect to vision health. Here we report ocular outcomes in 9 healthy subjects (age range: 27-48 years; Male/Female ratio: 8/1) completing bed rest Campaign 11, an integrated, multidisciplinary 70-day 6 degrees HDT bed rest study. Vision examinations were performed on a weekly basis, and consisted of office-based (2 pre- and 2 post-bed rest) and in-bed testing. The experimental design was a repeated measures design, with measurements for both eyes taken for each subject at each planned time point. Findings for the following tests were all reported as normal in each testing session for every subject: modified Amsler grid, red dot test, confrontational visual fields, color vision and fundus photography. Overall, no statistically significant differences were observed for any of the measures, except for both near and far visual acuity, which increased during the course of the study. This difference is not considered clinically relevant as may result from the effect of learning. Intraocular pressure results suggest a small increase at the beginning of the bed rest phase (p=0.059) and lesser increase at post-bed rest with respect to baseline (p=0.046). These preliminary results provide the basis for further analyses that will include correlations between intraocular pressure change pre- and post-bed rest, and optical coherence tomography measurements of the retina.

Cromwell, Ronita L.↗