Search NASA⌕ Search

SEARCH · Search NASA

Results for “shock events”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Broadband multiwavelength properties of the archetypal blazar 3C 279 during the 2017 Event Horizon Telescope campaign

The archetypal blazar 3C 279 hosts a prominent relativistic jet and exhibits strong broadband variability across the electromagnetic spectrum. In April 2017, the Event Horizon Telescope (EHT) observed 3C 279, alongside one of the most extensive quasi-simultaneous multiwavelength (MWL) campaigns ever conducted. With the aim of investigating the physical processes governing 3C 279, we analyzed individual observations and multiband light curves, and constructed a new quasi-simultaneous MWL spectrum. We also performed phenomenological modeling using the turbulent extreme multi-zone (TEMZ) model to constrain the fundamental physical properties of the source. The EHT observations reveal a clear flux increase in the innermost core between April 5 and 11, 2017. Over a broader timescale, radio measurements at longer wavelengths show concurrent enhancements in core flux and polarization around mid-April, coinciding with the ejection of a superluminal knot. Record UV-optical flares with strong polarization variability occurred in late March, followed by gamma-ray activity that declined before the end of the EHT observing period. During this interval, the source remained in a low X-ray state and showed no detectable VHE emission. The TEMZ modeling suggests that the broadband spectrum and variability of 3C 279 can be explained within a jet scenario in which turbulent plasma cells are compressed by a stationary conical shock. However, alternative interpretations, such as magnetic reconnection or a moving shock-in-jet event, remain plausible. This coordinated MWL campaign advances our understanding of the origin of jet and gamma-ray emission in 3C 279, while also providing a comprehensive publicly available dataset that will serve as a valuable reference for future studies.

Principe, G. [Trieste U.; INFN, Trieste; Bologna, ↗
DOE OSTI2023

Quantifying the effect of late bombardment on terrestrial zircons

The first 500 million years of Earth history is thought to be a period of intense planetary bombardment, but the timing and flux of this meteorite bombardment is poorly understood. In particular, on the basis of an inferred lunar impact history, some workers have hypothesized a ~3.9 Ga terminal cataclysm (TC) in which there was marked increase in the impact flux affecting the Moon, the Earth and possibly other terrestrial planets. Minerals that survived this enigmatic period offer a way to test early planetary bombardment models as they may contain telltale micro- to nanoscale shock features. Here, we present results from a numerical modeling calculation that assesses the probability that a zircon residing in the crust would escape shock melting or shock deformation during a TC bombardment event. Even with conservative pressure estimates for zircon shock deformation and intermediate bombardment intensities, we find that only ~6% of ≥4.0 Ga crust would be expected to survive a 3.9 Ga cataclysm without experiencing either complete melting or zircon shock metamorphism. In this study, we couple this modeling with a search for shock effects in the oldest zircons from the Acasta Gneiss Complex, which would have been present in the Earth's crust during a putative 3.9 Ga TC. Spatially correlated electron and NanoSIMS ion microscopy of 4.02 Ga igneous zircons from Acasta reveals no evidence of ancient shock. These data, together with similar results from other Hadean zircon suites, confirm that a post-Hadean TC is unlikely to have occurred. We suggest that the dearth of pre-3.9 Ga terrestrial crust and zircons is instead best explained by endogenic processes related to the mechanisms of early crust formation. Our modeling allows us to evaluate bombardment scenarios from the terrestrial zircon record by applying probabilistic interpretations to zircon shock deformation data. This approach will be valuable for other planetary bodies, allowing broader conclusions to be drawn from geographically limited datasets.

58 GEOSCIENCES↗
DOE OSTI2022

High-Fidelity Analysis of ULF Wave Mode Structure Following Interplanetary Shock Compression of the Dayside Magnetopause Using MMS Multi-Point Observations

During the 9 March 2018 event with two consecutive interplanetary shocks compressing the dayside magnetosphere, the azimuthal mode structure and frequency spectrum of ultra low frequency magnetic pulsations are resolved using a cross-spectral analysis based on high-fidelity multi-probe Magnetospheric Multiscale Mission (MMS) magnetometer data. The results based on the MMS 4 and MMS 3 pair of measurements show that shock arrival leads to low mode (|m| ≤ 3) magnetic fluctuations in the Pc4-5 regimes, and smaller spatial scale fluctuations implied by the dominant high mode numbers are observed after both shock signatures hit and passed the magnetosphere. Detailed evolution of the mode structure is also shown for the first shock to reveal the development of high mode structure from a bump-on-tail distribution at m≈20 to a dominant peak at m≈50 in about 10 min. In addition, an interesting change of sign in m from negative to positive is observed as MMS crosses ~11 MLT pre-noon, which is consistent with the picture of wave generation by dayside magnetopause compression and then anti-sunward propagation. Finally, for both shocks, the contribution of higher frequency waves (Pc-4 range compared with Pc-5) to the total wave power is found to be negligible before and after the shock impact, but it becomes more significant during the shock impact.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Why Are There so Few Reports of High-Energy Electron Drift Resonances? Role of Radial Phase Space Density Gradients

Models of monochromatic Pc5 (2–7 mHz) ultralow frequency (ULF) wave interactions with high energy (greater than ~1 MeV) electrons predict drift resonant interactions that can cause rapid radial transport and acceleration. There are few reports of electron drift resonance at energies greater than ~1 MeV, in contrast to lower energies; moreover, all previous reports occur in the aftermath of interplanetary shocks. These two facts are difficult to reconcile with theory and numerical simulations predicting that greater than ~1 MeV drift resonances should occur more often and in a wider variety of driving conditions. In this study, we show that a combination of observational sampling biases and nominal radial phase space density gradients is one explanation for this discrepancy between theory and observations. In particular, we examine electron dynamics in two case studies with very similar satellite coverage, solar wind conditions, and Pc5 wave properties, yet with different radial phase space density profiles. Using global wave and particle observations, we show that the events have vastly different particle responses despite having similar wave properties. Placing these results in context with past studies, we further show here that nominal radial PSD gradients near geostationary orbit can mask the expected drift resonance particle response and explain (1) the small number of past greater than ~1 MeV drift resonance reports and (2) the restriction of these reports to interplanetary shock events. We argue that future observational studies characterizing radial transport via drift resonance should examine global particle dynamics, including observations of the radial phase space density profile.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

30 cm Drop Modeling

This report documents modeling and analysis of the 30 cm cask drop scenario for spent nuclear fuel (SNF) casks. The 30 cm drop is an important hypothetical dynamic loading scenario for SNF because 10 CFR 71.71 defines testing requirements for normal conditions of transport (NCT) of SNF packages, and free drop (of 30 cm for the heaviest packages) tests are required. Other NCT conditions specified in 10 CFR 71.71 include vibration normally incident to transport, and DOE’s multimodal transportation test (MMTT) and related analysis concluded that mechanical shock and vibration incident to transportation is negligible for SNF structural integrity because the loads are so small. The SNF cask 30 cm drop has a lot more potential to cause damage to SNF because the kinetic energy and momentum of the system is stopped abruptly during the cask impact event. Test data and model predictions both agree that the SNF assemblies are subjected to significantly higher loads in a cask drop event than normal transportation shock and vibration, but currently there is no reason to expect gross structural damage of the fuel assembly or widespread SNF cladding failure as a result of a 30 cm cask drop. The ultimate goal of this work is to close the knowledge gap of stress profiles on SNF rods and fuel assembly components during NCT, and this report describes the progress toward reaching that goal as well as a plan for finishing this work over the next year or two. Key remaining tasks include refining the fuel assembly model, calculating a selection of specific fuel assembly cases to populate the damage model, and finally running the damage model to predict the full general response range of 30 cm drop loads on SNF.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Evaluating grid stress and reliability in future electricity grids across a range of demand, generation mix, and weather trends

The reliability of power grids in the future will depend on how system planners account for the integration of new technologies, extreme weather events, and uncertainties in demand growth from increased electrification and data centers. This study introduces an open-source, multisectoral, multiscale modeling framework that projects grid stress and reliability trends between 2020 and 2055 in the Western Interconnection of the United States. The framework integrates global to national energy-water-land dynamics with power plant siting and hourly grid operations modeling. We analyze future wholesale electricity price shocks and unserved energy events across eight scenarios spanning a range of population growth and economic change, generation mixes, and weather conditions. Our results show future grids with high percentage of non-renewable generation and strong economic growth are characterized by higher reliability and lower wholesale electricity prices than lower growth scenarios because of larger reliance on dispatchable generators and lower fossil fuel extraction costs. Scenarios with high percentage of renewable resources have lower median but more volatile wholesale electricity prices as well as more frequent and severe unserved energy events compared to scenarios relying more on dispatchable generators. These events occur because higher proportion of solar and wind energy causes net demand curves to deepen during midday (duck curves get progressively severe), exacerbating the challenge of meeting demand during summer evening peaks. This study suggests that robust and co-optimized transmission and energy storage planning could help maintain low wholesale electricity prices and high reliability levels in future electricity grids across uncertainties in generation mixes.

Electric grid reliability↗
DOE OSTI2026

Discovery of a nearby radio relic in the low-mass, merging cluster Abell 4067

Shock waves generated during cluster mergers offer a powerful probe of how large-scale structure grows and evolves in the Universe. As part of the MeerKAT-South Pole Telescope (SPT) survey, we report the discovery of a single arc-like radio relic in the galaxy cluster Abell 4067 ($z=0.099$), one of the lowest-mass clusters known to host such a structure. MeerKAT UHF-band (0.58–1.09 GHz) observations reveal a relic with a largest linear size of $\sim 1.48\pm 0.02$ Mpc, located at a projected distance of 0.95 Mpc from the cluster centre. XMM–Newton X-ray data show that the relic’s position and orientation relative to the intracluster medium (ICM) elongation are consistent with a merger-driven shock-wave scenario. The relic has an estimated radio power of $3.10\pm 0.03\times 10^{24}$ W Hz$^{-1}$ at 150 MHz. When placed in the $P_{150\, \mathrm{MHz}}$–$M_{500}$ scaling relation, the Abell 4067 relic appears less luminous compared to relics in more massive clusters, suggesting an association with weak merger shocks. This finding supports the idea that relics in low-mass clusters may form through less energetic merger events, leading to weak merger shocks. The latter is supported by the absence of a detectable central radio halo in Abell 4067, which reinforces the idea that luminous radio haloes are not a universal outcome of cluster mergers and highlights the role of cluster mass, merger energetics, and evolutionary stage in shaping diffuse radio emission in the ICM.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

2024 Milestone Report: Site 300 mPDV Optical Fiducials

In the early 2000s Photon Doppler Velocimetry (PDV) replaced the Fabry-Perot many beam system1 and has since become ubiquitous across dynamic experimental platforms to measure velocity and event times such as shock breakout, key variables for high pressure physics research. The advent of optically multiplexed oscilloscope channels to create multiplexed PDV (mPDV) increased portability and reduced price per data point. However, these advantages came with the cost of additional fielding complexity and thermally induced timing drift, which directly affects the ability to use PDV for high precision time measurement. Controlling the temperature or incorporating optical fiducials allows researchers to characterize, reduce, and correct this thermal drift in analysis. Our implemented optical fiducial or “timing marker” allows us to reduce thermal drift uncertainty from the 10s of nanoseconds down to the 100s of picoseconds with minimal added complexity to existing systems. The implementation of this timing marker normalizes uncertainty across optical delays, brings our facility cross timing into the sub nanosecond regime and lets us identify/study anomalies in our data. This improvement increases experiment reliability and quality enabling a new class of high precision experiments at S300.

42 ENGINEERING↗
DOE OSTI2023

Interhemispheric Observations of ULF Waves Caused by Foreshock Transients Under Quiet Solar Wind Conditions

Abstract Foreshock transient (FT) events are frequently observed phenomena that are generated by discontinuities in the solar wind. These transient events are known to trigger global‐scale magnetic field perturbations (e.g., ULF waves). We report a series of FT events observed by the Magnetospheric Multiscale mission in the upstream bow shock region under quiet solar wind conditions. During the event, ground magnetometers observed significant Pc1 wave activity as well as magnetic impulse events in both hemispheres. Ground Pc1 wave observations show ∼8 min time delay (with some time differences) from each FT event which is observed at the bow shock. We also find that the ground Pc1 waves are observed earlier in the northern hemisphere compared to the southern hemisphere. The observation time difference between the hemispheres implies that the source region of the wave is the off‐equatorial region.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Single-pulse (100 ps) extended x-ray absorption fine structure capability at the Dynamic Compression Sector

Determining real-time changes in the local atomistic order is important for a mechanistic understanding of shock wave induced structural and chemical changes. However, the single event and short duration (nanosecond times) nature of shock experiments pose challenges in obtaining Extended X-ray Absorption Fine Structure (EXAFS) measurements - typically used for monitoring local order changes. Here, we report on a new single pulse (~100 ps duration) transmission geometry EXAFS capability for use in laser shock-compression experiments at the Dynamic Compression Sector (DCS), Advanced Photon Source. We used a flat plate of highly oriented pyrolytic graphite (HOPG) as the spectrometer element to energy disperse x-rays transmitted through the sample. It provided high efficiency with approximately 15% of the x-rays incident on the HOPG reaching an x-ray area detector with high quantum efficiency. This combination resulted in good signal-to-noise ratio (~10 3 ), energy resolution of ~10 eV at 10 keV, EXAFS spectra covering 100s of eV, and good pulse to pulse reproducibility of our single pulse measurements. Ambient EXAFS spectra for Cu and Au are compared to reference spectra, validating our measurement system. Comparison of single pulse EXAFS results for ambient and laser shocked Ge(100) shows large changes to the local structure of the short lived state of shocked Ge. The current DCS EXAFS capability can be used to perform single pulse measurements in laser shocked materials from approximately 9-13 keV. These EXAFS developments will be available to all users of the DCS.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

The Effect of Large-scale Magnetic Fluctuations on Energetic Particle Profiles across Interplanetary Shocks

In situ observations of energetic particles associated with interplanetary (IP) shocks, known as energetic storm particle (ESP) events, often show time-intensity profiles quite different from predictions of classical diffusive shock acceleration theory. We use numerical simulations, including test-particle simulations and hybrid simulations (with fluid electrons and kinetic protons) for shocks propagating into a turbulent magnetic field to study the ESP intensity-time profiles across a strong IP shock. We find that several types of energetic particle intensity profiles similar to in situ observations can be produced in our simulations. The peak of energetic particle count is often near, but can be shifted from, the locations of the shock front, with the peak usually being observed downstream of the shock. These findings may help understand particle acceleration at both traveling IP shocks and shocks in other heliospheric and astrophysical environments.

Lo, Ming-Yuan [New Mexico Consortium (NMC), Los Al↗
DOE OSTI2024

Evidence of non-isentropic release from high residual temperatures in shocked metals measured with ultrafast x-ray diffraction

Shock experiments are widely used to understand the mechanical and electronic properties of matter under extreme conditions. However, after shock loading to a Hugoniot state, a clear description of the post-shock thermal state and its impacts on materials is still lacking. We used diffraction patterns from 100-fs x-ray pulses to investigate the temperature evolution of laser-shocked Al–Zr metal film composites at time delays ranging from 5 to 75 ns driven by a 120-ps short-pulse laser. We found significant heating of both Al and Zr after shock release, which can be attributed to heat generated by inelastic deformation. A conventional hydrodynamic model that employs (i) typical descriptions of Al and Zr mechanical strength and (ii) elevated strength responses (which might be attributed to an unknown strain rate dependence) did not fully account for the measured temperature increase, which suggests that other strength-related mechanisms (such as fine-scale void growth) could play an important role in thermal responses under shock wave loading/unloading cycles. Our results suggest that a significant portion of the total shock energy delivered by lasers becomes heat due to defect-facilitated plastic work, leaving less converted to kinetic energy. This heating effect may be common in laser-shocked experiments but has not been well acknowledged. High post-shock temperatures may induce phase transformation of materials during shock release. Another implication for the study is the preservability of magnetic records from planetary surfaces that have a shock history from frequent impact events.

42 ENGINEERING↗
DOE OSTI2022

Uncertainty Quantification and Sensitivity Analysis for Simulation of Hostile Blast Events [Slides]

A mesh convergence study shows that shock arrival times converge for basic flow shots. Sensitivity study reveals a surprisingly high sensitivity to the placement of the HE package. Bayesian inference tools used on the experimental datasets suggest this is a real effect. Sensitivity analysis of ambient conditions such as temperature and pressure reveal minimal effect. Porting of pressure data from QUINOA simulations to perform structural analysis on the aeroshell geometry was successful, and shows a strong dependence of payload response to the angle of attack.

42 ENGINEERING↗
DOE OSTI2022

Double-power-law Feature of Energetic Particles Accelerated at Coronal Shocks

Recent observations have shown that in many large solar energetic particle (SEP) events the event-integrated differential spectra resemble double power laws. We perform numerical modeling of particle acceleration at coronal shocks propagating through a streamer-like magnetic field by solving the Parker transport equation, including protons and heavier ions. We find that for all ion species the energy spectra integrated over the simulation domain can be described by a double power law, and the break energy depends on the ion charge-to-mass ratio as E B ~ (Q/A) α , with α varying from 0.16 to 1.2 by considering different turbulence spectral indices. We suggest that the double-power-law distribution may emerge as a result of the superposition of energetic particles from different source regions where the acceleration rates differ significantly due to particle diffusion. The diffusion and mixing of energetic particles could also provide an explanation for the increase of Fe/O at high energies as observed in some SEP events. Although further mixing processes may occur, our simulations indicate that either a power-law break or rollover can occur near the Sun and predict that the spectral forms vary significantly along the shock front, which may be examined by upcoming near-Sun SEP measurements from the Parker Solar Probe and Solar Orbiter.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

A method for assessing economic, environmental, and reliability tradeoffs of interregional transmission connecting ERCOT (the Texas grid) to the eastern and western grids

Reliable development of the power grid is an evolving concern for humanity due to extreme weather that frequently threatens power sector infrastructure. The state of Texas is a uniquely structured testbed for grid planners to study when looking for solutions to development, innovation, and overcoming such challenges. Because of its size and islanded structure, Texas is small enough to model, but big enough to matter. Texas is a global leader in energy production, energy consumption, and maintains an unusually diverse fuel mix. In addition, the state has experienced winter freezes, heat waves, wind storms, droughts and floods that have threatened power sector infrastructure or caused recent blackouts and calls for demand side conservation. One of the most devastating of these events was the North American winter storm, dubbed “Winter Storm Uri” by the Weather Channel, that froze the region in February 2021 and led to an extended power outage event that put the majority of Texan residents in darkness for days. While preparing to avoid such outage events in the future, various tools have been proposed to improve grid reliability, including energy efficiency, demand response, and distributed energy resources. An additional option would be to develop interregional transmission that connects the Texas grid to other national grids. To assess the merits of this idea, we developed a novel, universally-applicable and internationally-relevant framework to study how the Texas grid would evolve alongside access to various interregional ties. This method allows us to stress the synthetic grid structure and analyze how it would respond to the shock of a simulated winter storm event. Our method leverages open-source modeling tools, such as PowerGenome, pyGRETA, and GenX to synthesize unique zonal grid data, construct a consolidated network of model regions, and simulate different developmental pathways of capacity expansion and operational dispatch. We demonstrate our method with an analysis connecting the Electric Reliability Council of Texas (ERCOT), the grid that serves most of Texas, the Western Electricity Coordinating Council (WECC), the grid that serves the western half of the contiguous U.S., and the Eastern Interconnect, the grid that serves the eastern half of the contiguous U.S. Our results indicate that the cost-optimal capacity of interregional transmission connecting the ERCOT grid to other grids lies between 9–13 GW assuming baseline conditions. Building this amount of connecting capacity in one or multiple directions lowers the costs and emissions of development and operation by up to $16 billion and 257 million metric tonnes (MMT) respectively. Additionally, our results show that the interregional connections between ERCOT and other national grids reduce the amount of total load shed required through mild winter storm events. However, our results also show that there is a threshold of very extreme winter storm conditions, spanning multiple service areas, above which the connections exacerbate resource adequacy problems. Therefore, the results indicate that the connections need to be carefully planned alongside the rest of the grid infrastructure to avoid over-reliance on specific resources or technology options.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2026

Shock wave formation in the thermosphere by an earthgrazing fireball: Empirical evidence for volatile-enhanced hydrodynamic shielding

Hydrodynamic shielding is a theoretically well-established but observationally elusive and experimentally difficult-to-replicate phenomenon with implications that extend far beyond meteor physics. Rare earthgrazing meteoroids with infrasound signatures that penetrate to the ground can be used to probe hydrodynamic shielding that leads to strong shock formation at high altitude. Here, we report the first coordinated optical and multi-station infrasound observations of a centimeter-scale earthgrazing fireball that generated sustained cylindrical line shock at thermospheric altitudes near 92 km. The event was recorded by numerous optical stations and three infrasound arrays, allowing trajectory reconstruction, ablation behavior, acoustic source localization, and shock characteristics. Optical observations indicate early mechanical erosion and ablation/evaporation at exceptionally low dynamic pressure, consistent with a cometary or a porous, volatile-bearing CM chondritic object. Independent infrasound detections localize shock generation to multiple points along a 164 km trajectory segment near perigee. Weak-shock modeling yields a consistent blast radius of ∼30 m, implying an acoustic-equivalent source size far exceeding the physical dimensions of the ∼45 g nucleus. We demonstrate that classical gas dynamics and ablation-driven hydrodynamic shielding alone cannot account for these observations under ambient thermospheric conditions. We show that volatile release provides the additional flow-field density enhancement required to amplify hydrodynamic shielding, reduce the effective local Knudsen number, and sustain a shock envelope capable of radiating detectable infrasound. Furthermore, these results demonstrate that small, volatile-rich meteoroids can transiently establish continuum-like flow in rarefied environments.

Astrometry↗
DOE OSTI2024

The Impact of the 8–10 March 2012 Geomagnetic Storm on Inner Zone Protons as Measured by Van Allen Probes

The Relativistic Electron Proton Telescope (REPT) instrument on the Van Allen Probes observed a double-peaked inner zone proton population throughout the 7 year lifetime of the mission. M. Hudson et al. (2023) showed that a strong SEP event accompanied by a CME-shock in early March 2012 provided the Solar Energetic Proton (SEP) source for the higher L trapped proton population, which then diffused radially inward to be observed by REPT at L = 2. The study followed trajectories of SEP protons launched isotropically from a sphere at 7 Re for 2.5 hr in fields calculated by the LFM-RCM global MHD model, which includes electric fields needed to model the transport and trapping of the protons by the shock, and then a radial diffusion simulation was run for 2 years using the result from the test-particle simulation as the initial condition. The simulation result was compared with REPT measurement in November 2013 and showed reasonable agreement. However, the simulation overestimated the Phase Space Density by a factor of four due to lack of field line curvature scattering during the storm in the model. In this study, a test-particle simulation is performed for 2 days following the injection and trapping of protons in March 2012 using TS05 fields to simulate the field line curvature scattering of the trapped SEP due to the buildup of the ring current during the geomagnetic storm. The resulting sample distribution was then weighted using the flux at the end of the two-hour MHD-test particle simulation. A radial diffusion simulation is then run using the initial profile that included the loss effect, with improved comparison with REPT measurements after 2 years.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Detection of Damage Inducing Impact Events in Vibration Test Fixtures Using Holder Exponents

The Shock and Vibration team within the Test Engineering group at Los Alamos National Laboratory (LANL) aids in the development and qualification of weapon systems for the United States Department of Energy (DOE). Performing tests that replicate shock and vibration environments representative of a weapon’s lifetime is critical in ensuring safety, survivability, and reliability. A key factor in shock and vibration testing is accurate representation of the weapon’s boundary conditions in its end use configuration. The boundary conditions representative of a reentry body in flight are particularly difficult to replicate on an electrodynamic shaker. When executing shock and vibration tests on a reentry body, two system axes are tested with the system in a cantilevered configuration. This cantilevered testing configuration results in a moment load being applied to the system while undergoing vibration environments. A special fixture, known as the Flex-Web, was developed to decouple this moment load from the reentry body in order to more accurately represent real world boundary conditions while replicating flight environments.

42 ENGINEERING↗