Search NASA⌕ Search

SEARCH · Search NASA

Results for “solid state NMR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Emergence of lignin-carbohydrate interactions during plant stem maturation visualized by solid-state NMR

Lignification waterproofs and strengthens secondary plant cell walls but increases the energy cost of sugar release for biofuels. The physical association between lignin and the carbohydrate scaffold that accommodates lignin polymerization, along with the distinct roles of lignin units and carbohydrate partners during lignification, remain unclear. Here, we map lignin-carbohydrate spatial proximity by solid-state NMR in 13 C-labeled Arabidopsis inflorescence stems during secondary cell wall formation. Analyses include wild-type plants and mutants that selectively or globally disrupt lignin biosynthesis. Mature walls in basal regions show enrichment of S-lignin and dense carbohydrate-lignin packing. Acetylated xylan predominantly associates with S-lignin, while methylated pectin unexpectedly interacts with G-lignin during early-stage lignification. The importance of S-lignin in stabilizing the carbohydrate-lignin interface is highlighted by weak lignin-carbohydrate contacts and compromised mechanical properties in the low-S fah1 mutant, whereas the ref3 mutant, despite reduced lignin content, remains unaffected due to a high S/G ratio. Thus, molecular mixing patterns, rather than lignin content, critically determine the structure and properties of lignocellulosic materials.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Rapid High-Resolution Analysis of Polysaccharide-Lignin Interactions in Secondary Plant Cell Walls Using Proton-Detected Solid-State NMR

The plant secondary cell wall, a complex matrix composed of cellulose, hemicellulose, and lignin, is crucial for the mechanical strength and water-proofing properties of plant tissues, and serves as a primary source of biomass for biorenewable energy and biomaterials. Structural analysis of these polymers and their interactions within the secondary cell wall has been heavily relying on 13 C-based solid-state NMR techniques. In this study, we explore the application of 1 H-detected solid-state NMR techniques for rapid, high-resolution structural characterization of polysaccharides and lignin, demonstrated on the stems of hardwood eucalyptus. We explored the use of synthesized 2D spectra to resolve central 1 H resonances and the combined application of 3D hCCH and hCHH experiments for complete resonance assignment and unambiguous identification of lignin-carbohydrate interactions. Our findings emphasize the central role of acetylated three-fold xylan conformers, rather than two-fold, in stabilizing the carbohydrate-lignin interface, with glucuronic acid sidechains in eucalyptus glucuronoxylan colocalizing with lignin, revised cellulose-lignin interactions involving uncoated microfibril surfaces, and pectin-lignin interactions indicative of early-stage lignification. These results present a novel approach for rapid structural analysis of lignocellulosic biomaterials without the need for solubilization or extraction.

09 BIOMASS FUELS↗
DOE OSTI2022

Current limitations of solid-state NMR in carbohydrate and cell wall research

High-resolution investigation of cell wall materials has emerged as an important application of biomolecular solid-state NMR (ssNMR). Multidimensional correlation experiments have become a standard method for obtaining sufficient spectral resolution to determine the polymorphic structure of carbohydrates and address biochemical questions regarding the supramolecular organization of cell walls. Here, using plant cellulose and matrix polysaccharides as examples, we will review how the multifaceted complexity of polysaccharide structure is impeding the resonance assignment process and assess the available biochemical and spectroscopic approaches that could circumvent this barrier. We will emphasize the ineffectiveness of the current methods in reconciling the ever-growing dataset and deriving structural information. We will evaluate the protocols for achieving efficient and homogeneous hyperpolarization across the cell wall material using magic-angle spinning dynamic nuclear polarization (MAS-DNP). Critical questions regarding the line-broadening effects of cell wall molecules at cryogenic temperature and by paramagnetic biradicals will be considered. Finally, the MAS-DNP method will be placed into a broader context with other structural characterization techniques, such as cryo-electron microscopy, to advance ssNMR research in carbohydrate and cell wall biomaterials.

09 BIOMASS FUELS↗
DOE OSTI2025

Protecting air/moisture-sensitive samples using perdeuterated paraffin wax for solid-state NMR experiments under magic-angle spinning

Solid-state nuclear magnetic resonance (SSNMR) spectroscopy is a powerful technique for materials characterization, yet its application to air- and moisture-sensitive materials is often hindered by the difficulty in maintaining an inert environment during magic-angle spinning (MAS). This is particularly true for fast-MAS rotors that do not generally provide tight seals. Herein, we present a generalizable approach employing perdeuterated paraffin waxes—n-icosane-d42 and c-dodecane-d24—as protective embedding media to analyze sensitive organometallic catalysts using SSNMR. We demonstrate that these waxes significantly slow oxidative degradation under MAS conditions. Weak background 1 H and 13 C NMR signals from the waxes are effectively suppressed using double-quantum filtration and cross-polarization techniques. In conclusion, these findings offer a robust method for expanding the scope of SSNMR to air-sensitive systems, with implications for the structural study of reactive materials and catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Cellulose crystallinity index (CrI) of switchgrass measured by solid-state NMR

Here we present a curated dataset of switchgrass cellulose crystallinity index (CrI) measured using solid state nuclear magnetic resonance (NMR) spectroscopy. Seventy-two topline switchgrass lines grown in greenhouse were collected and ground to -20/+80 mesh. The switchgrass was then Soxhlet-extracted with toluene/ethanol for 24 h to remove extractives. The extractives-free switchgrass was holopulped by using peracetic acid at 5 g loading per g biomass and the solution consistency was adjusted to 5% with DI water. Holopulping was conducted at room temperature for 24 h with stirring. The obtained holocellulose was washed excessively with DI water and air-dried at room temperature for 24 h. The dried holocellulose was treated with hydrochloric acid (2.5 M) for 2 h to remove hemicellulose. The isolated cellulose was collected by filtration, rinsed with DI water, and used to analyze cellulose crystallinity by solid-state NMR. The NMR samples were prepared by packing the moisturized cellulose into 4-mm cylindrical Zirconia MAS rotors. Cross polarization/magic angle spinning (CP/MAS) NMR analysis of cellulose was carried out on a Bruker Avance III 400-MHz spectrometer operating at 100.59 MHz for 13C in a Bruker double-resonance MAS probe head at spinning speeds of 8 kHz. The CP/MAS experiments utilized a 5 ms (90°) proton pulse, 1.5 ms contact pulse, 4 s recycle delay and 4000 scans. The cellulose crystallinity index was determined from the areas of the cellulose crystalline C4 signal (δ 86-92 ppm) over the entire C4 regions (δ 79-92 ppm) in the NMR spectra.

Cellulose, crystallinity index, switchgrass, solid↗
DOE OSTI2024

Persistence of Methionine Side Chain Mobility at Low Temperatures in a Nine‐Residue Low Complexity Peptide, as Probed by 2 H Solid‐State NMR

Abstract Methionine side chains are flexible entities which play important roles in defining hydrophobic interfaces. We utilize deuterium static solid‐state NMR to assess rotameric inter‐conversions and other dynamic modes of the methionine in the context of a nine‐residue random‐coil peptide (RC9) with the low‐complexity sequence GGKGMGFGL. The measurements in the temperature range of 313 to 161 K demonstrate that the rotameric interconversions in the hydrated solid powder state persist to temperatures below 200 K. Removal of solvation significantly reduces the rate of the rotameric motions. We employed 2 H NMR line shape analysis, longitudinal and rotation frame relaxation, and chemical exchange saturation transfer methods and found that the combination of multiple techniques creates a significantly more refined model in comparison with a single technique. Further, we compare the most essential features of the dynamics in RC9 to two different methionine‐containing systems, characterized previously. Namely, the M35 of hydrated amyloid‐β 1–40 in the three‐fold symmetric polymorph as well as Fluorenylmethyloxycarbonyl (FMOC)‐methionine amino acid with the bulky hydrophobic group. The comparison suggests that the driving force for the enhanced methionine side chain mobility in RC9 is the thermodynamic factor stemming from distributions of rotameric populations, rather than the increase in the rate constant.

Vugmeyster, Liliya↗
DOE OSTI2021

A pectin methyltransferase modulates polysaccharide dynamics and interactions in Arabidopsis primary cell walls: Evidence from solid-state NMR

Plant cell walls contain cellulose embedded in matrix polysaccharides. Understanding carbohydrate structures and interactions is critical to the production of biofuel and biomaterials using these natural resources. Here we present a solid-state NMR study of cellulose and pectin in 13 C-labeled cell walls of Arabidopsis wild-type and mutant plants. Using 1D 13 C and 2D 13 C– 13 C correlation experiments, we detected a highly branched arabinan structure in qua2 and tsd2 samples, two allelic mutants for a pectin methyltransferase. Both mutants show close physical association between cellulose and the backbones of pectic homogalacturonan and rhamnogalacturonan-I. Relaxation and dipolar order parameters revealed enhanced microsecond dynamics due to polymer disorder in the mutants, but restricted motional amplitudes due to tighter pectin-cellulose associations. These molecular data shed light on polymer structure and packing in these two pectin mutants, helping to elucidate how pectin could influence cell wall architecture at the nanoscale, cell wall mechanics, and plant growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Interaction of methanol with a layered α-Sn(IV) phosphate on its surface: A solid-state NMR study

Here, a layered crystalline phosphate, α-Sn(HPO 4 ) 2 ·H 2 O, treated with CD 3 OD was characterized by the 31 P, 119 Sn, 1 H and 2 H solid-state NMR techniques. The 2 H solid-echo MAS NMR spectra of the product have unexpectedly revealed deuterated hydronium ions on the surface of this material instead of intercalated methanol. According to the 13 C NMR and GC–MS studies, these ions are formed by water molecules following a dehydration of the methanol-d 4 to yield deuterated dimethyl ether.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Determination of the relative orientation between 15 N- 1 H dipolar coupling and 1 H chemical shift anisotropy tensors under fast MAS solid-state NMR

Here, in this work, we have proposed a proton-detected three-dimensional (3D) 15 N- 1 H dipolar coupling (DIP)/ 1 H chemical shift anisotropy (CSA)/ 1 H chemical shift (CS) correlation experiment to measure the relative orientation between the 15 N- 1 H dipolar coupling and the 1 H CSA tensors under fast magic angle spinning (MAS) solid-state NMR. In the 3D correlation experiment, the 15 N- 1 H dipolar coupling and 1 H CSA tensors are recoupled using our recently developed windowless C-symmetry-based $C3^{1}_{3}$-ROCSA (recoupling of chemical shift anisotropy) DIPSHIFT and $C3^{1}_{3}$-ROCSA pulse-based methods, respectively. The 2D 15 N- 1 H DIP/ 1 H CSA powder lineshapes extracted using the proposed 3D correlation method are shown to be sensitive to the sign and asymmetry of the 1 H CSA tensor, a feature that allows the determination of the relative orientation between the two correlating tensors with improved accuracy. The experimental method developed in this study is demonstrated on a powdered U- 15 N L-Histidine.HCl·H 2 O sample.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Dynamics in Flexible Pillar[ n ]arenes Probed by Solid-State NMR

Pillar[n]arenes are supramolecular assemblies that can perform a range of technologically important molecular separations which are enabled by their molecular flexibility. Here, we probe dynamical behavior by performing a range of variable-temperature solid-state NMR experiments on microcrystalline perethylated pillar[n]arene (n = 5, 6) and the corresponding three pillar[6]arene xylene adducts in the 100–350 K range. This was achieved either by measuring site-selective motional averaged 13 C 1 H heteronuclear dipolar couplings and subsequently accessing order parameters or by determining 1 H and 13 C spin–lattice relaxation times and extracting correlation times based on dipolar and/or chemical shift anisotropy relaxation mechanisms. We demonstrate fast motional regimes at room temperature and highlight a significant difference in dynamics between the core of the pillar[n]arenes, the protruding flexible ethoxy groups, and the adsorbed xylene guest. Additionally, unexpected and sizable 13 C 1 H heteronuclear dipolar couplings for a quaternary carbon were observed for p-xylene adsorbed in pillar[6]arene only, indicating a strong host–guest interaction and establishing the p-xylene location inside the host, confirming structural refinements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

1 H chemical shift anisotropy: a high sensitivity solid-state NMR dynamics probe for surface studies?

We report dynamics play significant roles in chemistry and biochemistry-molecular motions impact both large- and small-scale chemical reactions in addition to biochemical processes. In many systems, including heterogeneous catalysts, the characterization of dynamics remains a challenge. The most common approaches involve the solid-state NMR measurement of anisotropic interactions, in particular 2 H quadrupolar coupling and 1 H–X dipolar coupling, which generally require isotope enrichment. Due to the high sensitivity of 1 H NMR, 1 H chemical shift anisotropy (CSA) is a particularly enticing, and underexplored, dynamics probe. We carried out 1 H CSA and 1 H– 13 C dipolar coupling measurements in a series of model supported complexes to understand how 1 H CSA can be leveraged to gain dynamic information for heterogeneous catalysts. Mathematical descriptions are given for the dynamic averaging of the CSA tensor, and its dependence on orientation and asymmetry. The variability of the orientation of the tensor in the molecular frame, in addition to its magnitude and asymmetry, negatively impacts attempts to extract quantitative dynamic information. Nevertheless, 1 H CSA measurements can reveal useful qualitative insights into the motions of a particularly dilute site, such as from a surface species.

1H chemical shift anisotropy↗
DOE OSTI2020

Interactions of Oxide Surfaces with Water Revealed with Solid-State NMR Spectroscopy

Hydrous materials are ubiquitous in the natural environment and efforts have previously been made to investigate the structures and dynamics of hydrated surfaces for their key roles in various chemical and physical applications, with the help of theoretical modeling and microscopy techniques. However, an overall atomic-scale understanding of the water–solid interface, including the effect of water on surface ions, is still lacking. Herein, we employ ceria nanorods with different amounts of water as an example and demonstrate a new approach to explore the water–surface interactions by using solid-state NMR in combination with density functional theory. NMR shifts and relaxation time analysis provide detailed information on the local structure of oxygen ions and the nature of water motion on the surface: the amount of molecularly adsorbed water decreases rapidly with increasing temperature (from room temperature to 150 °C), whereas hydroxyl groups are stable up to 150 °C, and dynamic water molecules are found to instantaneously coordinate to the surface oxygen ions. Additionally, the applicability of dynamic nuclear polarization for selective detection of surface oxygen species is also compared to conventional NMR with surface selective isotopic-labeling: the optimal method depends on the feasibility of enrichment and the concentration of protons in the sample. These results provide new insight into the interfacial structure of hydrated oxide nanostructures, which is important to improve performance for various applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Dipolar Heteronuclear Correlation Solid-State NMR Experiments between Half-Integer Quadrupolar Nuclei: The Case of 11 B– 17 O

With 73% of all NMR-active nuclei being quadrupolar, there is great interest in the development of NMR experiments that can probe the proximity of quadrupolar spins. Here, pulse sequences for magic-angle spinning (MAS) 11 B– 17 O resonance-echo saturation-pulse double-resonance (RESPDOR) and dipolar heteronuclear multiple quantum correlation (D-HMQC) solid-state NMR experiments were investigated. In these pulse sequences, rotational-echo double-resonance (REDOR) recoupling was used with central transition (CT)-selective π-pulses applied to either the 11 B or 17 O spins to recouple 11 B– 17 O dipolar interactions. 11 B{ 17 O} RESPDOR experiments on 17 O-enriched boric acid and benzene diboronic acid showed that application of dipolar recoupling on the 11 B channel yielded more signal dephasing than when recoupling is applied on the 17 O channel; however, short effective 11 B transverse relaxation time constants (T 2 ') hinder the acquisition of dephasing curves out to long recoupling durations. Application of REDOR recoupling to 17 O spins was found to produce significant dephasing without compromising the 11 B T 2 '. Comparison of experimental 11 B{ 17 O} RESPDOR curves to those of numerical simulations enabled the 17 O isotopic enrichment to be estimated. 2D 11 B{ 17 O} D-HMQC spectra were recorded with either 11 B or 17 O REDOR recoupling under a variety of radio frequency field conditions. Lastly, 2D 11 B{ 17 O} and 23 Na{ 17 O} D-HMQC spectra of an 17 O-enriched sodium borate glass were acquired to demonstrate the practical application of these heteronuclear correlation experiments to probe structural connectivity between two quadrupolar spins. Importantly, the high-field 2D 11 B– 17 O D-HMQC NMR spectrum revealed two unique 17 O sites correlating to 4-coordinate BO 4 ( [4] B), which were attributed to the [3] B–O– [4] B and [4] B–O– [4] B bridging O atoms. Furthermore, the heteronuclear correlation experiments outlined here should be applicable to a variety of quadrupolar spin pairs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Proton-detected 15 N- 1 H dipolar coupling/ 1 H chemical shift correlation experiment for the measurement of NH distances in biological solids under fast MAS solid-state NMR

Measurement of distances from dipolar couplings is essential for structural characterization, refinement and validation using the solid-state nuclear magnetic resonance (ssNMR) spectroscopy. Particularly, knowledge about NH dipolar interactions in biological solids is important for understanding the hydrogen (H)-bonding interactions, molecular geometry and spin dynamics. In this regard, we have proposed a proton-detected two-dimensional (2D) 15 N- 1 H dipolar coupling/ 1 H chemical shift correlation experiment using the C-symmetry based windowless recoupling of chemical shift anisotropy (ROCSA) in combination with the DIPSHIFT pulse-based method for the measurement of short NH distances in the isotopically labeled and naturally abundant biological solids at fast magic angle spinning (MAS) rates (40–70 kHz). Our proposed method results in undistorted recoupled 15 N- 1 H dipolar coupling powder lineshapes that are free from the recoupled 1 H CSA contributions under the 15 N evolution, a feature that is essential for the measurement of NH distances with improved accuracy (± 500 Hz in terms of the NH dipolar couplings). The pulse sequence developed in the present study is also insensitive to the 1H–1H homonuclear dipolar interactions, relaxation effects owing to its constant-time implementation, and t1-noise from the fluctuations in the MAS.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

29Si solid state NMR and Ti K-edge XAFS pre-edge spectroscopy reveal complex behavior of Ti in silicate melts

Abstract An understanding of the mechanisms of Ti is incorporation into silicate glasses and melts is critical for the field of petrology. Trace-element thermobarometry, high-field-strength element partitioning, and the physical properties of magmas are all be influenced by Ti incorporation into glasses and changes therein in response to changes in composition and temperature. In this study, we combine 29 Si solid state NMR and Ti K -edge XAFS spectroscopy to investigate how Ti is incorporated into quenched Na-silicate glasses, and the influence of Ti on the structure of silicate species in these glasses. 29 Si NMR shows that in both Ti-bearing Na 2 O•4SiO 2 (NS4) and Na 2 O•8SiO 2 (NS8) glasses, increasing the amount of Ti in the melt results in a shift of Si Q 4 peak in the 29 Si NMR spectra reflecting Ti nearest neighbors for Si in Q 4 speciation. The Ti XAFS results from NS8 glass indicate that Ti is primarily incorporated in [5]-fold coordination. At higher Ti content, there is a shift of the XAFS pre-edge feature suggesting mixing of [4]-fold Ti into the spectra. Combined, the 29 Si NMR and XAFS pre-edge data are consistent with Ti incorporation as isolated [5] Ti atoms and the formation of [5] Ti clusters at relatively low Ti concentrations, with no evidence for Ti–Na interactions as suggested by previous studies. As the Ti content increases, the Ti atoms begin to occupy 4-fold coordinated sites interacting primarily with Si in Q 4 speciation (no significant Na– [4] Ti bonding). The internal consistency of these two techniques provides a uniquely complete snapshot of the complexity of Ti incorporation in silicate melts and underlies the importance of understanding Ti incorporation mechanisms in natural magmatic systems.

Ackerson, Michael R.↗
DOE OSTI2020

Identifying the Molecular Edge Termination of Exfoliated Hexagonal Boron Nitride Nanosheets with Solid-State NMR Spectroscopy and Plane-Wave DFT Calculations

Hexagonal boron nitride nanosheets (h-BNNS), the isoelectronic analog to graphene, have received interest over the past decade due to their high thermal oxidative resistance, high bandgap, catalytic activity, and low cost. The functional groups that terminate boron and nitrogen zigzag and/or armchair edges directly affect their chemical, physical, and electronic properties. However, an understanding of the molecular edge termination present in h-BNNS is lacking. Here, high-resolution magic-angle spinning (MAS) solid-state NMR (SSNMR) spectroscopy, and plane-wave density-functional theory (DFT) calculations are used to determine the molecular edge termination in exfoliated h-BNNS. 1 H → 11 B cross-polarization MAS (CPMAS) SSNMR spectra of h-BNNS revealed multiple hydroxyl/oxygen coordinated boron edge sites that were not detectable in direct excitation experiments. A dynamic nuclear polarization (DNP)-enhanced 1 H → 15 N CPMAS spectrum of h-BNNS displayed four distinct 15 N resonances while a 2D 1 H{ 14 N} dipolar-HMQC spectrum acquired with fast MAS revealed three distinct 14 N environments. Plane-wave DFT calculations were used to construct model edge structures and predict the corresponding 11 B, 14 N and 15 N SSNMR spectra. Comparison of the experimental and predicted SSNMR spectra confirms that zigzag and armchair edges with both amine and boron hydroxide/oxide termination are present. The detailed characterization of h-BNNS molecular edge termination will prove useful for many material science applications. The techniques outlined here should also be applicable to understand the molecular edge terminations in other 2D materials

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗