Search NASA⌕ Search

SEARCH · Search NASA

Results for “thermodynamic equilibrium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A quantitative phase-field model for gas bubble evolution in UO2

Due to the large formation energy of vacancies and noble gas atoms in the form of interstitials or substitutional atoms in nuclear fuel (UO2), the thermodynamic equilibrium concentrations of these species are very low in the nuclear fuel matrix even at very high temperatures, which imposes difficulties upon the quantitative study of bubble evolution via the phase-field method. In this study, a quantitative phase-field model is proposed to deal with this problem. The system’s free energy density is derived according to the principles of thermodynamics, with consideration of the elastic effect and with the use of real material parameters from experiments. The model is useful for the study of the kinetics of gas bubble growth with very dilute concentrations of vacancy and gas atoms in the matrix. This model is applied to study single bubble growth and multiple bubble growth under various concentrations of vacancy and gas atoms and at various temperatures. The elastic effect and the effects of the generation rate of vacancies and gas atoms on bubble growth are analyzed.

low defect concentration, nuclear fuel, gas bubble↗
DOE OSTI2024

A collision operator for describing dissipation in noncanonical phase space

The phase space of a noncanonical Hamiltonian system is partially inaccessible due to dynamical constraints (Casimir invariants) arising from the kernel of the Poisson tensor. When an ensemble of noncanonical Hamiltonian systems is allowed to interact, dissipative processes eventually break the phase space constraints, resulting in a thermodynamic equilibrium described by a Maxwell–Boltzmann distribution. However, the time scale required to reach Maxwell–Boltzmann statistics is often much longer than the time scale over which a given system achieves a state of thermal equilibrium. Examples include diffusion in rigid mechanical systems, as well as collisionless relaxation in magnetized plasmas and stellar systems, where the interval between binary Coulomb or gravitational collisions can be longer than the time scale over which stable structures are self-organized. Here, we focus on self-organizing phenomena over spacetime scales such that particle interactions respect the noncanonical Hamiltonian structure, but yet act to create a state of thermodynamic equilibrium. We derive a collision operator for general noncanonical Hamiltonian systems, applicable to fast, localized interactions. This collision operator depends on the interaction exchanged by colliding particles and on the Poisson tensor encoding the noncanonical phase space structure, is consistent with entropy growth and conservation of particle number and energy, preserves the interior Casimir invariants, reduces to the Landau collision operator in the limit of grazing binary Coulomb collisions in canonical phase space, and exhibits a metriplectic structure. We further show how thermodynamic equilibria depart from Maxwell–Boltzmann statistics due to the noncanonical phase space structure, and how self-organization and collisionless relaxation in magnetized plasmas and stellar systems can be described through the derived collision operator.

Boltzmann equation↗
DOE OSTI2022

Grain growth kinetics of the gamma phase metallic uranium

We report metallic uranium is a leading fuel form for sodium cooled fast reactors as an enabling technology of future nuclear energy systems. Mechanistic understanding of fuel behaviors and kinetics under thermodynamic equilibrium and highly non-equilibrium conditions are essential for evaluating fuel performance. It is important to understand and predict the grain and pore evolutions of metallic fuels under thermal and irradiation conditions. However, very limited data are available on the grain growth kinetics and mechanisms of pure gamma phase uranium. In this paper, the pure gamma uranium pellets with different grain structures were fabricated by combining high-energy ball milling and spark plasma sintering. Isothermal annealing tests were performed to investigate the grain growth behavior of the pure gamma phase uranium with different initial grain sizes. A parabolic relationship in grain growth with time was identified for the submicron-sized (374 nm) sample. In contrast, for the nano-sized (137 nm) sample, the grain growth shows a linear relationship with time. The activation energies of grain growth were determined as 199.5 KJ/mol and 80.6 KJ/mol for nano-sized and submicron-sized grain structures, respectively. For the nano-sized sample, the rate-control step of grain growth is dominated by the triple-junction migration, in which the grain boundary triple junction drags the grain growth, leading to a higher activation energy than the bulk diffusion. The dominating mechanism for the submicron-sized sample is grain boundary diffusion. The mechanistic understanding and critical data obtained on the kinetics of pure uranium phases will be useful to evaluate fuel behavior under thermodynamic equilibrium conditions and develop a high fidelity model to predict fuel performance.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Compatibility of Type 304H Stainless Steel in Static Molten FLiBe for Inertial Confinement Fusion Reactors: Role of Impurities and Redox Control

Molten fluoride salts, such as FLiBe (LiF-BeF2), are promising candidates for tritium breeding and heat transfer in fusion reactors, but corrosion of structural materials remains a major challenge. This study investigates the corrosion behavior of austenitic stainless steel 304H in purified and NiF2-containing FLiBe at 500°C and 600°C, focusing on the effects of impurities and redox control. Exposure to purified FLiBe resulted in the concurrent depletion of Cr, Mn, and Fe, with corrosion at 500 °C dominated by the combined oxide formation and elemental dissolution, while at 600°C elemental depletion was predominant. The addition of a controlled NiF2 impurity significantly accelerated corrosion at both temperatures, demonstrating the sensitivity of 304H to the salt redox state. Beryllium additions were effective in mitigating corrosion for both baseline and NiF2-containing FLiBe; minimal depletion of Cr, Mn, and Fe occurred with Be additions as low as 2.5 mg (147 wppm), and no NiBe intermetallics formed at 5 mg (294 wppm), indicating that small Be inventories can provide substantial protection without deleterious phase formation. Thermodynamic equilibrium and coupled thermodynamic-kinetic analyses at the salt-alloy interface suggested low corrosion rates in systems with limited hydrogen fluoride (HF) generation, highlighting the importance of salt redox control. Estimates for a Be addition rate were calculated for the HYLIFE-II fusion reactor that can mitigate corrosion-induced degradation, assuming complete conversion of tritium to tritium fluoride (TF). Overall, 304H shows reasonable compatibility with FLiBe under optimized redox conditions. These results provide quantitative guidance for material selection and salt management in fusion blanket and heat exchanger systems and motivate validation under flowing, nonisothermal, and irradiated conditions.

Pillai, Rishi [ORNL] (ORCID:0000000243688197)↗
DOE OSTI2020

Plasma-Catalytic Ammonia Synthesis beyond the Equilibrium Limit

In this work, we explore the consequences of nonthermal plasma-activation on product yields in catalytic ammonia synthesis, a reaction that is equilibrium-limited at elevated temperatures. We employ a minimal microkinetic model that incorporates the influence of plasma-activation on N 2 dissociation rates to predict NH 3 yields into and across the equilibrium-limited regime. NH 3 yields are predicted to exceed bulk thermodynamic equilibrium limits on materials that are thermal-rate-limited by N 2 dissociation. In all cases, yields revert to bulk equilibrium at temperatures at which thermal reaction rates exceed plasma-activated ones. Beyond-equilibrium NH 3 yields are observed in a packed bed dielectric barrier discharge reactor and exhibit sensitivity to catalytic material choice in a way consistent with model predictions. The approach and results highlight the opportunity to exploit synergies between nonthermal plasmas and catalysts to affect transformations at conditions inaccessible through thermal routes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Experimental evidence of non-equilibrium phase separation in supercritical fluids

Supercritical fluids (SCFs), widely utilized in many industries, have long been regarded as homogeneous single-phase media. Recent simulation studies identified different phases (more gas-like or liquid-like) in SCFs at equilibrium, expanding the previous notion but still not addressing non-equilibrium properties of SCFs. Here we reveal the existence of long-lived liquid-like clusters in non-equilibrium SCFs by time-resolved small-angle neutron scattering measurements. Since SCFs in industrial applications frequently operate under dynamic, non-equilibrium conditions rather than strict thermodynamic equilibrium, our findings offer crucial information for improving the use of SCFs in industrial settings, like semiconductor cleaning and plant thermal-hydraulic engineering.

Lee, Juho [Pohang Univ. of Science and Technology ↗
DOE OSTI2024

MaterialsMap: A CALPHAD-based tool to design composition pathways through feasibility map for desired dissimilar materials, demonstrated with resistance spot welding joining of Ag-Al-Cu

Assembly of dissimilar metals can be achieved by different methods, for example, casting, welding, and additive manufacturing (AM). However, undesired phases formed in liquid-phase assembling processes due to solute segregation during solidification diminish mechanical and other properties of the processed parts. In the present work, an open-source software named MaterialsMap, has been developed based on the CALculation of Phase Diagrams (CALPHAD) approach. The primary objective of MaterialsMap is to facilitate the design of an optimal composition pathway for assembling dissimilar alloys with liquid-phases based on the formation of desired and undesired phases along the pathway. In MaterialsMap, equilibrium thermodynamic calculations are used to predict equilibrium phases formed at slow cooling rate, while Scheil-Gulliver simulations are employed to predict non-equilibrium phases formed during rapid cooling. Additionally, by combining these two simulations, MaterialsMap offers a thorough guide for understanding phase formation in various manufacturing processes, assisting users in making informed decisions during material selection and production. As a demonstration of this approach, a compositional pathway was designed from pure Al to pure Cu through Ag using MaterialsMap. The design was experimentally verified using resistance spot welding (RSW).

36 MATERIALS SCIENCE↗
DOE OSTI2025

Complexions at the iron-magnetite interface

Synthesizing distinct phases and controlling crystalline defects are key concepts in materials design. These approaches are often decoupled, with the former grounded in equilibrium thermodynamics and the latter in nonequilibrium kinetics. By unifying them through defect phase diagrams, we can apply phase equilibrium models to thermodynamically evaluate defects—including dislocations, grain boundaries, and phase boundaries—establishing a theoretical framework linking material imperfections to properties. Using scanning transmission electron microscopy (STEM) with differential phase contrast (DPC) imaging, we achieve the simultaneous imaging of heavy Fe and light O atoms, precisely mapping the atomic structure and chemical composition at the iron-magnetite (Fe/Fe 3 O 4 ) interface. We identify a well-ordered two-layer interface-stabilized phase state (referred to as complexion) at the Fe[001]/Fe 3 O 4 [001] interface. Using density-functional theory (DFT), we explain the observed complexion and map out various interface-stabilized phases as a function of the O chemical potential. The formation of complexions increases interface adhesion by 20% and alters charge transfer between adjacent materials, impacting transport properties. Our findings highlight the potential of tunable defect-stabilized phase states as a degree of freedom in materials design, enabling optimized corrosion protection, catalysis, and redox-driven phase transitions, with applications in materials sustainability, efficient energy conversion, and green steel production.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Aerosol Thermodynamics (Aerosol Liquid Water Concentration and Aerosol pH) at S2 during CoURAGE

These data report aerosol liquid water content (ALWC) and aerosol pH for the S2 (Mt. Airy) site during CoURAGE for April - June 2025. The ISORROPIA-II aerosol thermodynamic equilibrium model was used to compute ALWC and pH. The model was run in forward mode, with solids formation disabled (metastable mode), according to Pye et al. (Atmospheric Chemistry and Physics, 2020). Information about the model can be found at https://www.epfl.ch/labs/lapi/models-and-software/isorropia/, and in Fountoukis and Nenes (Atmospheric Chemistry and Physics, 2007). Inputs to the model were: (1) measured Temperature and relative humidity, both from the DoE ARM “metwxt” data products at S2, (2) aerosol chemical composition from the ARM ACSM, and (3) gas-phase ammonia concentrations. For ISORROPIA-II, ambient RH values above 0.995 were input to the model as 0.995; therefore, caution should be exercised interpreting ALWC when RH was above 0.995. Aerosol composition or NH3(g) concentrations below the LOD were input into the model as 0.5*LOD. Model runs were only conducted for data points at 30-min resolution with all three inputs (meteorology, ACSM, and NH3). If any of the three model inputs were missing, aerosol thermodynamic outputs are flagged as -999. Similarly, aerosol thermodynamic outputs are flagged as -999 if measured NH3(g) and aerosol ammonium (NH4+) were simultaneously below the respective LODs. The ALWC includes liquid water from inorganic aerosol components, calculated directly by ISORROPIA-II, as well as liquid water from organics, estimated from the ACSM organics assuming a kappa value of 0.12 according to Guo et al. (Atmospheric Chemistry and Physics, 2015).

Aerosol Liquid Water Content↗
DOE OSTI2025

Catalytic hydrogenation of HMF to BHMF over copper catalysts

2,5-Bis(hydroxymethyl)furan (BHMF) is a bio-derived building block for polyester production, obtained via the hydrogenation of 5-hydroxymethylfurfural (HMF). First-principles thermodynamic equilibrium calculations indicate that this reaction is not thermodynamically limited under relevant conditions (e.g., 100 °C and high H 2 partial pressure). In this work, crude HMF was employed as the feedstock for BHMF synthesis. Initially, acidic impurities and humins were removed from unrefined HMF through filtration using a packed bed of γ-alumina. A comprehensive study of the filtration process is presented, including filtration kinetics, breakthrough curve analysis, and mathematical modeling. The purified HMF was subsequently hydrogenated over a 10 wt% CuZrO 2 catalyst, using ethanol as the reaction solvent. Batch reactions were first performed for collection of kinetic data to guide the transition to continuous flow operation. Kinetic data was collected in a fixed bed reactor at varying contact time, time on stream, temperature, and HMF concentration. This data was used to develop a kinetic model for HMF hydrogenation. Maximum BHMF production rates were achieved at 130 °C, accompanied by minor formation of byproducts from BHMF ring-opening reactions. The BHMF selectivity was 100 % at 100 °C although with lower reaction rates. Furthermore, catalyst stability tests revealed a loss of up to 50 % in catalytic activity within the first 24 h, likely due to the adsorption of HMF-derived oligomers that are not easily removed by filtration.

Crude HMF filtration↗
DOE OSTI2021

Electron-scale temperature gradients in kinetic equilibrium: MMS observations and Vlasov–Maxwell solutions

For an ideal gas, the notion of thermodynamic equilibrium requires that the system’s temperature be spatially uniform. We demonstrate that for a collisionless plasma, kinetic equilibrium can be achieved even in the presence of a temperature gradient. Motivated by recent MMS magnetopause observations of thin current layers exhibiting electron-scale temperature gradients, here we present an exact solution to the Vlasov-Maxwell system which accounts for the observed electron temperature gradient and reproduces much of the plasma’s spatial variation along one dimension. Furthermore, the current layer in the Vlasov-Maxwell model is self-consistently supported by a prominent crescent shaped electron velocity distribution that naturally arises due to the temperature transition, which agrees with the electron distribution structures measured by MMS during two asymmetric current layers encountered at the magnetopause.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Structure of a chaotic tangle of quantum vortices in turbulent superfluid liquids and in a Bose – Einstein condensate

Based on the theory of the thermodynamic equilibrium in a system of quantum vortices in superfluid liquids and in a Bose – Einstein condensate in the presence of a counterflow of normal and superfluid components, we investigate the structure of a chaotic tangle of quantum vortices in turbulent superfluid liquids. Using the characteristic functional method, the properties of hydrodynamic vortex filaments are examined. It is shown that the average curvature of the vortex lines is on the order of the intervortex distance, with the proportionality coefficient being independent of the counterflow velocity. It is found that the degree of anisotropy of the vortex loops does not depend on the applied counterflow velocity. The obtained results explain the origin of the anisotropy as well as the relationship between the curvature of the lines and the intervortex space and their dependence on the parameters of the problem. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

The remarkable inefficiency of stratocumulus

Marine stratocumulus clouds play a central role in Earth's climate system by reflecting incoming solar radiation and exerting a strong cooling effect. Their organization into open and closed mesoscale cellular morphologies can be thought of as an example of bistable dynamics driven by aerosol–cloud interactions and mesoscale processes. From the perspective of non-equilibrium thermodynamics, these structures are an example of a far-from-equilibrium open system that continuously produces and exports entropy. While entropy production has been studied in idealized deep convective systems, it has not yet been quantified for shallow clouds. Here, we compute and decompose the internal entropy production of open- and closed-cell stratocumulus using an ensemble of large-eddy simulations. We show that the overall entropy production of stratocumulus is low, reflecting the limited vertical extent and corresponding reduced ability to utilize the energy fluxes at the system's boundaries. Moist processes dominate the overall irreversibility, which, combined with their low entropy production, leads to a mechanical efficiency about an order of magnitude smaller than in deep convective systems. Although the dominant irreversible processes differ between open- and closed-cell regimes, the distributions of total entropy production largely overlap across the ensemble, limiting the ability to distinguish the dynamics of individual cases based solely on total entropy production.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Fluctuating hydrodynamics of chiral active fluids

Active materials are characterized by continuous injection of energy at the microscopic level and typically cannot be adequately described by equilibrium thermodynamics. Here we study a class of active fluids in which equilibrium-like properties emerge when fluctuating and activated degrees of freedom are statistically decoupled, such that their mutual information is negligible. We analyse three paradigmatic systems: chiral active fluids composed of spinning frictional particles that are free to translate, oscillating granular gases and active Brownian rollers. In all of these systems, a single effective temperature generated by activity parameterizes both the equation of state and the emergent Boltzmann statistics. The same effective temperature, renormalized by velocity correlations, relates viscosities to steady-state stress fluctuations via a Green–Kubo relation. To rationalize these observations, we develop a theory for the fluctuating hydrodynamics of these non-equilibrium fluids and validate it through large-scale molecular dynamics simulations. Our work sheds light on the microscopic origin of odd viscosities and stress fluctuations characteristic of parity-violating fluids, in which mirror symmetry and detailed balance are broken.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Modernist materials synthesis: Finding thermodynamic shortcuts with hyperdimensional chemistry

Synthesis remains a challenge for advancing materials science. A key focus of this challenge is how to enable selective synthesis, particularly as it pertains to metastable materials. This perspective addresses the question: how can “spectator” elements, such as those found in double ion exchange (metathesis) reactions, enable selective materials synthesis? By observing reaction pathways as they happen (in situ) and calculating their energetics using modern computational thermodynamics, we observe transient, crystalline intermediates that suggest that many reactions attain a local thermodynamic equilibrium dictated by local chemical potentials far before achieving a global equilibrium set by the average composition. Furthermore, using this knowledge, one can thermodynamically “shortcut” unfavorable intermediates by including additional elements beyond those of the desired target, providing access to a greater number of intermediates with advantageous energetics and selective phase nucleation. Ultimately, data-driven modeling that unites first-principles approaches with experimental insights will refine the accuracy of emerging predictive retrosynthetic models for complex materials synthesis.

36 MATERIALS SCIENCE↗
DOE OSTI2020

New Grids of Pure-hydrogen White Dwarf NLTE Model Atmospheres and the HST/STIS Flux Calibration

Nonlocal thermodynamic equilibrium (NLTE) calculations of hot white dwarf (WD) model atmospheres are the cornerstone of modern flux calibrations for the Hubble Space Telescope and for the CALSPEC database. These theoretical spectral energy distributions (SEDs) provide the relative flux versus wavelength, and only the absolute flux level remains to be set by reconciling the measured absolute flux of Vega in the visible with the Midcourse Space Experiment values for Sirius in the mid-IR. The most recent SEDs calculated by the tlusty and tmap NLTE model atmosphere codes for the primary WDs G191-B2B, GD 153, and GD 71 show improved agreement to 1% from 1500 Å to 30 μm, in comparison to the previous 1% consistency only from 2000 Å to 5 μm. These new NLTE models of hot WDs now provide consistent flux standards from the far UV to the mid-IR.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Excitations across the Equilibrium and Photoinduced “Hidden” States of Magnetoresistive Manganites

“Hidden” phases, generated using ultrafast laser pulses (few hundred femtoseconds), with distinct properties than at the thermodynamic equilibrium, are appealing for technologies, as they can be long-lived, with a lifetime of hours or weeks, and reversible with temperature sweeping or extra pulses. In this regard, La 2/3 ⁢Ca 1/3⁢ MnO 3 (LCMO) stands out due to its tunability through epitaxial strain, which can drive the bulk ferromagnetic metal into an antiferromagnetic insulator (AFI), and its susceptibility to photoinduced transitions. Indeed, AFI LCMO displays a long-lived photoinduced transition into a putative hidden phase whose exact nature and excitations are still largely unknown. Here, we combine ultrafast photoexcitation in the near infrared with in situ transport, x-ray absorption, and resonant inelastic x-ray scattering (RIXS) to investigate the excitations (polarons, phonons, and orbital) of the photoexcited phase of LCMO and contrast them with the thermodynamic phases achieved through strain and temperature. In the thermodynamic regime, we establish the correlation between polarons and transport placing them in the “strong coupling” regime of the Holstein model. Upon photoexcitation of LCMO-AFI, we uncover a long-lived phase characterized by the softening of the polaron excitations, the partial suppression of the Jahn-Teller distortion, and nearly unchanged phonons, showing the emergence of a photoexcited state absent in the equilibrium phase diagram. Finally, by varying temperature, epitaxial strain, and photoexcitation fluence, we construct a polaron phase diagram and identify the key spectroscopic signatures of each phase. Our laser-RIXS approach establishes a versatile platform for exploring photoinduced hidden phases in quantum materials in nonstroboscopic conditions.

36 MATERIALS SCIENCE↗