Search NASA⌕ Search

SEARCH · Search NASA

Results for “titania”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Confinement of Lewis Acid–Base Sites by Microporous Silica Layers on Titania for Enhanced Alkanol Dehydration Reactivity

Alkanol dehydration offers a pathway to upgrade biomass-derived short-chain oxygenates into alkenes, essential chemical building blocks widely used in industrial applications. Transition metal oxides with Lewis acid-base site pairs are attractive catalysts due to their high reactivity and cost-effectiveness. This work demonstrates a synthetic pathway to manipulate local environments around active Lewis acid-base pairs in anatase TiO 2 to enhance their reactivity in alkanol dehydration. Microporous SiO 2 layers with an average pore diameter of ~0.6 nm and a controlled thickness of 0.8-33 nm are deposited on anatase TiO 2 powders by using a molecular templated SiO 2 deposition method. The Lewis acid-base strength of accessible Ti-O pairs remains unchanged, as shown by temperature-programmed surface reactions of surface-bound formic acid-derived species and temperature-programmed desorption of pyridine. However, measured alkanol dehydration rates on confined Ti-O pairs are much higher (by up to 7-fold) than those on TiO 2 . The extent of rate enhancements depends on the reactant size and functional group positioning, suggesting that the rate enhancements reflect the interactions between the guest molecules (reactants and transition states) and the surrounding SiO 2 micropore environments. By providing a detailed synthetic procedure to tailor the local environments around active sites in bulk oxides, this approach offers an additional avenue for enhancing catalytic performance.

09 BIOMASS FUELS↗
DOE OSTI2025

Efficient Synthetic Natural Gas Production from Direct Air Capture Using Titania-Based Dual Function Materials

Converting atmospheric CO2 into methane offers a compelling pathway to store intermittent renewable electricity and enhance energy security using existing natural gas infrastructure. However, current CO2 utilization approaches remain energy- and capital-intensive, largely due to the need for separate capture, purification, and conversion steps. Integrating CO2 capture with catalytic methanation represents a transformative strategy for process intensification on both the unit operation and molecular levels. We report a series of Ru-Na/TiO2 dual function materials (DFMs) for a reactive carbon capture (RCC) process consisting of simulated direct air capture and subsequent CO2 methanation (DACM). Superior methane desorption purity was observed on TiO2-based DFMs (>94 %) relative to state-of-the-art Al2O3-supported DFMs (77 %). Modifying the process to begin CO2 adsorption immediately following the methanation stage, rather than beginning adsorption near ambient temperature, resulted in >97 % methane desorption purity, suitable for injection into the natural gas pipeline without additional CO2 separation steps.

organic↗
DOE OSTI2024

Alumina–Titania Nanolaminate Condensers for Hot Programmable Catalysis

Nanolaminates composed of thin alternating layers of Al2O 3 and TiO 2 (ATO) were engineered by using atomic layer deposition as the dielectric material for a Pt-on-carbon catalytic condenser. Investigation assessed synthesis parameters including the deposition temperature, Al 2 O 3 and TiO 2 layer thicknesses, total number of layers, and a capping Al 2 O 3 layer on the maximum charge accumulation in the Pt catalyst. The highest capacitance ATO configuration demonstrated a specific capacitance of ∼1200 nF/cm 2 with working voltages of ±5 V, enabling the storage of 4 × 10 13 electrons or holes per cm 2 at room temperature. The ATO devices exhibited enhanced capacitance at elevated temperatures of up to 400 °C, suggesting the suitability of these materials for high-temperature applications. Adsorption of carbon monoxide on the Pt/C-ATO device characterized by grazing incidence infrared spectroscopy showed changes in the surface binding energy of 13.1 ± 0.8 kJ/mol for an applied external voltage bias of ±1 V.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1986

Crystallization of baria-titania-silica glasses

The critical cooling rate for glass formation, Rc, and the crystallization kinetics of the compositions (1/2)(100-x)BaO-(1/2)(100-x)TiO2-(x)SiO2 with x = 20, 25, 30, 33.3, and 40 mol pct were studied using a thermal image furnace. Crystallization was studied under nonisothermal conditions, and the data were analyzed using the Johnson-Mehl-Avrami equation. The Rc and activation energy for crystallization both decrease with increasing silica content. Fresnoite, Ba2TiSi2O8, crystallized from all of the glasses when they were reheated. The infrared absorption spectra of the glasses and crystals show that they both contain (Si2O7) and square pyramidal (TiO5) groups.

Ray, Chandra S.↗
NASA NTRS1994

Numerical Analysis of an Impinging Jet Reactor for the CVD and Gas-Phase Nucleation of Titania

We model a cold-wall atmospheric pressure impinging jet reactor to study the CVD and gas-phase nucleation of TiO2 from a titanium tetra-iso-propoxide (TTIP)/oxygen dilute source gas mixture in nitrogen. The mathematical model uses the computational code FIDAP and complements our recent asymptotic theory for high activation energy gas-phase reactions in thin chemically reacting sublayers. The numerical predictions highlight deviations from ideality in various regions inside the experimental reactor. Model predictions of deposition rates and the onset of gas-phase nucleation compare favorably with experiments. Although variable property effects on deposition rates are not significant (approximately 11 percent at 1000 K), the reduction rates due to Soret transport is substantial (approximately 75 percent at 1000 K).

Gokoglu, Suleyman A.↗
NASA NTRS2009

Composite Silica Aerogels Opacified with Titania

A further improvement has been made to reduce the high-temperature thermal conductivities of the aerogel-matrix composite materials described in Improved Silica Aerogel Composite Materials (NPO-44287), NASA Tech Briefs, Vol. 32, No. 9 (September 2008), page 50. Because the contribution of infrared radiation to heat transfer increases sharply with temperature, the effective high-temperature thermal conductivity of a thermal-insulation material can be reduced by opacifying the material to reduce the radiative contribution. Therefore, the essence of the present improvement is to add an opacifying constituent material (specifically, TiO2 powder) to the aerogel-matrix composites.

Paik, Jon-Ah↗
NASA NTRS2013

Trace Contaminant Control: An In-Depth Study of a Silica-Titania Composite for Photocatalytic Remediation of Closed-Environment Habitat Air

This collection of studies focuses on a PCO system for the oxidation of a model compound, ethanol, using an adsorption-enhanced silica-TiO2 composite (STC) as the photocatalyst; studies are aimed at addressing the optimization of various parameters including light source, humidity, temperature, and possible poisoning events for use as part of a system for gaseous trace-contaminant control system in closed-environment habitats. The first goal focused on distinguishing the effect of photon flux (i.e., photons per unit time reaching a surface) from that of photon energy (i.e., wavelength) of a photon source on the PCO of ethanol. Experiments were conducted in a bench-scale annular reactor packed with STC pellets and irradiated with either a UV-A fluorescent black light blue lamp O max=365 nm) at its maximum light intensity or a UV-C germicidal lamp O. max=254 nm) at three levels of light intensity. The STC-catalyzed oxidation of ethanol was found to follow zero-order kinetics with respect to CO2 production, regardless of the photon source. Increased photon flux led to increased EtOH removal, mineralization, and oxidation rate accompanied by lower intermediate concentration in the effluent. The oxidation rate was higher in the reactor irradiated by UV-C than by UV-A (38.4 vs. 31.9 nM s-1 ) at the same photon flux, with similar trends for mineralization (53.9 vs. 43.4%) and reaction quantum efficiency (i.e., photonic efficiency, 63.3 vs. 50.1 nmol C02 ~mol photons-1 ). UV-C irradiation also led to decreased intermediate concentration in the effluent compared to UV -A irradiation. These results demonstrated that STC-catalyzed oxidation is enhanced by both increased photon flux and photon energy. The effect of temperature and relative humidity on the STC-catalyzed degradation of ethanol was also determined using the UV-A light source at its maximum intensity.

Coutts, Janelle L.↗
NASA NTRS2014

Experimental and Theoretical Study of Thermodynamics of the Reaction of Titania and Water at High Temperatures

The transpiration method was used to determine the volatility of titanium dioxide (TiO2) in water vapor-containing environments at temperatures between 1473 and 1673 K. Water contents ranged from 0 to 76 mole % in oxygen or argon carrier gases for 20 to 250 hr exposure times. Results indicate that oxygen is not a key contributor to volatilization and the primary reaction for volatilization in this temperature range is: TiO2(s) + H2O(g) = TiO(OH)2(g). Data were analyzed with both the second and third law methods to extract an enthalpy and entropy of formation. The geometry and vibrational frequencies of TiO(OH)2(g) were computed using B3LYP density functional theory, and the enthalpy of formation was computed using the coupled-cluster singles and doubles method with a perturbative correction for connected triple substitutions [CCSD(T)]. Thermal functions are calculated using both a structure with bent and linear hydroxyl groups. Calculated second and third heats show closer agreement with the linear hydroxyl group, suggesting more experimental and computational spectroscopic and structural work is needed on this system.

equilibrium↗
DOE OSTI2024

CO oxidation over a ligand coordinated single site Rh catalyst: identification of the active complex

Single atom catalysis has evolved as a promising strategy to enhance atom utilization efficiency, lower reaction temperatures, and control reaction pathways in heterogeneous catalytic reactions. An important challenge using supported single atom catalysts is the stability of metal single atoms during reactions. Here, we present an approach to stabilize single rhodium atoms on a titania support via a metal–ligand coordination strategy. We explore the reaction activity and mechanism of CO oxidation, as well as the stability under oxidative reaction conditions. Kinetic studies suggest that, with an excess of oxygen in the feed gas, oxygen activation is more facile on defective titania surfaces than on pristine titania surfaces. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analysis shows that on the pristine titania surface, the 1,10-phenanthroline-5,6-dione (PDO) coordinated Rh catalyst (Rh–PDO/TiO 2 ) catalyzes CO oxidation via the formation of carbonate-like species, which is similar to what occurs on Rh nanoparticle catalysts. However, on the defective titania surface, no carbonate species form for Rh–PDO/def-TiO 2 . The supported Rh–ligand catalysts are also shown to be very stable in such a reaction environment at elevated temperatures, potentially allowing for wide applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2006

Aerogel/Particle Composites for Thermoelectric Devices

Optimizing solution chemistry and the addition of titania and fumed silica powder reduces shrinkage. These materials would serve to increase thermal efficiency by providing thermal insulation to suppress lateral heat leaks. They would also serve to prolong operational lifetime by suppressing sublimation of certain constituents of thermoelectric materials (e.g., sublimation of Sb from CoSb3) at typical high operating temperatures. [The use of pure silica aerogels as cast-in-place thermal-insulation and sublimation-suppression materials was described in "Aerogels for Thermal Insulation of Thermoelectric Devices" (NPO-40630), NASA Tech Briefs, Vol. 30, No. 7 (July 2006), page 50.] A silica aerogel is synthesized in a solgel process that includes preparation of a silica sol, gelation of the sol, and drying of the gel in a solvent at a supercritical temperature and pressure. The utility of pure silica aerogel is diminished by a tendency to shrink (and, therefore, also to crack) during the gelation and supercritical-drying stages. Moreover, to increase suppression of sublimation, it is advantageous to make an aerogel having greater density, but shrinkage and cracking tend to increase with density. A composite material of the type under investigation consists mostly of titania oxide powder particles and a small addition of fumed silica powder, which are mixed into the sol along with other ingredients prior to the gelation stage of processing. The silica aerogel and fumed silica act as a binder, gluing the titania particles together. It is believed that the addition of fumed silica stiffens the aerogel network and reduces shrinkage during the supercritical-drying stage. Minimization of shrinkage enables establishment of intimate contact between thermoelectric legs and the composite material, thereby maximizing the effectiveness of the material for thermal insulation and suppression of sublimation. To some extent, the properties of the composite can be tailored via the proportions of titania and other ingredients. In particular (see figure), the addition of a suitably large proportion of titania (e.g., 0.6 g/cu cm) along with a 10-percent increase in the amount of tetraethylorthosilicate [TEOS (an ingredient of the sol)] to an aerogel component having a density 40 mg/cm3makes it possible to cast a high-average-density (>0.1 g/cm3) aerogel/particle composite having low shrinkage (2.3 percent).

Paik, Jong-Ah↗
DOE OSTI2025

Metal–Oxide Interface Sites Created Using Atomic Layer Deposition and Tested for CO Oxidation

The performance of catalysts made out of Pt supported on TiO 2 thin films grown on SBA-15 (a silica mesoporous material) by atomic layer deposition (ALD) was characterized systematically by combining in situ infrared absorption spectroscopy (IR) with other techniques including electron microscopy and adsorption−desorption isothermal measurements. The titania films in the resulting high-surface-area catalysts were evenly distributed throughout the inner surface of the SBA-15 mesopores, and their thickness could be controlled at a submonolayer level, with 3 to 4 TiO 2 ALD cycles needed for the complete coverage of the silica sites. The titania films could be deposited either before or after adding the metal (Pt), which was dispersed in the form of small nanoparticles (NPs) approximately 4−6 nm in diameter, in order to exert some control on the density and nature of the Pt/TiO 2 interface sites. One important lesson deriving from this work is that such an order of deposition leads to significantly different catalysts in spite of the fact that most of their structural properties are similar. If the Pt is deposited on the titania films, the resulting metal NPs are slightly smaller than those grown on silica and display CO adsorption sites with lower surface Pt coordination numbers. On the other hand, when TiO 2 is deposited on the Pt/SBA-15 starting material, some titania grows on the metal and partially blocks its surface while also creating new interface sites where CO binds more weakly and displays lower C−O stretching frequencies. In terms of catalytic performance, the results from in situ IR CO site titration and kinetic measurements combined suggest a mechanism where CO first adsorbs on Pt atop sites and then migrates to Pt/TiO 2 interface sites, where oxidation takes place. Both types of sites appear to be similar in all the catalysts tested, but catalytic performance could be optimized by tuning their surface densities. Maximum catalytic activity was obtained when the TiO2 films were deposited first and with TiO 2 coverages of at least half a monolayer, that is, after at least 2 ALD cycles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1984

Physical Properties of the Uranian Satellites

Recent work on the satellites of Uranus revealed many of their basic physical properties. Radiometric measurements showed that the Ariel, Umbriel, Titania and Oberon have diameters which range from 1630 to 1110 km and albedos which range from 0.30 to 0.18. Spectrophotometric observations of Miranda suggest that it may have the highest albedo of the known Uranian satellites and a diameter of about 500 km. Near-infrared measurements show that Ariel, Titania and Oberon have the largest known opposition surges. All five known satellites of Uranus have surfaces which are composed of water ice contaminated with small amounts of dark material. The dark material on the surfaces of Ariel, Umbriel, Titania and Oberon is spectrally bland and has spectral similarities to carbon black, charcoal, carbonaceous chondritic material and other dark, spectrally neutral materials. Recent density determinations suggest that there may be large density differences among Ariel, Umbriel, Titania and Oberon, with density increasing with distance from Uranus.

Brown, R. H.↗
NASA NTRS1985

Structural characterization and gas reactions of small metal particles by high-resolution TEM and TED

The interaction of 100 and 200 keV electron beams with amorphous alumina, titania, and aluminum nitride substrates and nanometer-size palladium particulate deposits was investigated for the two extreme cases of (1) large-area electron-beam flash-heating and (2) small-area high-intensity electron-beam irradiation. The former simulates a short-term heating effect with minimum electron irradiation exposure, the latter simulates high-dosage irradiation with minimum heating effect. All alumina and titania samples responded to the flash-heating treatment with significant recrystallization. However, the size, crystal structure, shape, and orientation of the grains depended on the type and thickness of the films and the thickness of the Pd deposit. High-dosage electron irradiation also readily crystallized the alumina substrate films but did not affect the titania films. The alumina recrystallization products were usually either all in the alpha phase, or they were a mixture of small grains in a number of low-temperature phases including gamma, delta, kappa, beta, theta-alumina. Palladium deposits reacted heavily with the alumina substrates during either treatment, but they were very little effected when supported on titania. Both treatments had the same, less prominent localized crystallization effect on aluminum nitride films.

Heinemann, K.↗
DOE OSTI2025

Phase-Dependent Structure Sensitivity of Pt/TiO 2 for CO Oxidation Reactions

Here, in this study, we investigated the effect of the support (rutile vs anatase titania) and of the Pt size of Pt nanoparticles and supports (rutile vs anatase) in the CO oxidation reaction. The steady-state specific activity of Pt/Rutile gradually increases with Pt dispersion, while that of Pt/Anatase is invariant with respect to Pt dispersion and is lower than the activity of Pt/Rutile. Our kinetic studies demonstrated that the reaction order for CO based on steady state is positive for sub-nm Pt clusters stabilized on rutile titania and it gradually changes to zero for large Pt clusters (>1 nm), as known in agreement with other studies for for supported Pt catalysts. In contrast, Pt/Anatase catalysts always show zero order dependence irrespective of Pt the size of Pt nanoparticles. Scanning transmission electron microscopy (STEM), X-ray photoelectron spectroscopy (XPS) and CO chemisorption results confirm that the notable sintering of sub-nm Pt clusters supported on anatase occurs with time-on-stream, which we correlate with might be related with the change of the CO reaction order from positive (order initially) tobut zero order for larger particles after sintered states. On the contrary, Pt/Rutile does not show serious sintering during the reaction, and it shows positive reaction order even during the steady state. Thus Pt/Rutile shows positive order at steady state and higher specific activity. Our study reveals the origin of profound catalytic differences between Pt nanoparticles supported on anatase and rutile titania and highlights better stability and activity of Pt/Rutile catalysts. than Pt/Anatase due to its better stability.

Kim, Haneul [Ulsan National Institute of Science a↗
NASA NTRS1987

The control networks of the satellites of Uranus

The present photogrammetric derivation of control networks for the five Uranus satellites Miranda, Ariel, Umbriel, Titania, and Oberon, on the basis of Voyager 2 images, covers the illuminated southern hemisphere of each satellite and respectively yields 103, 52, 43, 46, and 34 coordinate points. It is found that Titania is ellipsoidal, with 241-, 235-, and 232-km radii.In addition, mean radii are determined to be 579 km for Ariel, 586 km for Umbriel, 790 km for Titania, and 762 km for Oberon. Some of the control points used have been identified on the U.S. Geological Survey maps of these satellites.

Davies, Merton E.↗
DOE OSTI2024

Influence of Domain Size and Support Composition on the Reducibility of SiO 2 and TiO 2 Supported Tungsten Oxide Clusters

Supported tungsten oxides are widely used in a variety of catalytic reactions. Depending on the support, the cluster size, oxidation state, reducibility and speciation of the tungsten oxides can widely differ. When promoted with a platinum group metal, the resulting spillover of hydrogen may facilitate the reduction of supported tungsten oxide species, depending on the support. High resolution scanning transmission electron microscopy imaging showed nanometer scale WO x clusters were synthesized on SiO 2 whereas highly dispersed species were formed on TiO 2 . Results from H 2 -temperature-programmed reduction showed the presence of Pd lowered the initial reduction temperature of SiO 2 -supported WO x species but interestingly did not affect that of TiO 2 -supported WO x . X-ray photoelectron and absorption spectroscopies showed the W atoms in SiO 2 -supported WO x species reduce from a +6 oxidation state to primarily +5 after thermal treatment in 5% H 2 , while the fraction of W in the +5 oxidation state was relatively unaffected by reduction treatment of TiO 2 -supported WO x . The unusual behavior of TiO 2 -supported WO x was explained by quantum chemical calculations that reveal the lack of change in the oxidation state of W is attributed to charge delocalization on the surface atoms of the titania support, which does not occur on silica. Moreover, modeling results at <600 K in the presence of H 2 suggest the formation of Brønsted acid sites, and the absence of Lewis acid sites, on larger aggregates of WO x on silica and all cluster sizes on titania. These results provide experimental and theoretical insights into the nature of supported tungsten oxide clusters under conditions relevant to various catalytic reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗