SEARCH · Search NASA

Results for “FEED study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Computational Fluid Dynamics Simulation of Compressible Non-Newtonian Biomass in a Compression-Screw Feeder

Compression-screw feeders play a critical role in biorefineries to transport lignocellulosic biomass feedstocks from the feeding hoppers to biomass-conversion reactors in order to pretreat and convert biomass to hydrocarbon liquid biofuels and other power and energy resources. One of the main challenges in the operation of screw feeder is plugging and jamming of compressed biomass with high concentration of insoluble solids. The focus of this paper is to numerically investigate the screw feeder at these challenging operating conditions and help with the optimization of the screw feeder design to avoid operation failure. In this work a customized CFD model based on open-source OpenFOAM package [1] was developed to simulate the concentrated biomass as a highly viscous non-Newtonian fluid in the screw feeder. The biomass is modeled as a single-phase compressible Bingham fluid with a plastic viscosity as well as a density-dependent yield stress. The compressibility formulation (pressure-dependent density) and the density-dependent yield stress formulation in the governing equations follow the suggestions from a recent study by Duncan et al. [2]. A pilot-scale hopper/screw feeding system at NREL [3] is used to compare the experimental observations with our simulation results. The auger is 280 mm long and tapered with outer diameter changing from 80 mm to 35 mm. The auger rotates from 10 to 60 rpm in a conical throat which contains anti-rotational bars. The simulations predicted the required torque for the screw feeder and the pressure increase at the exit for biomass feedstocks with various fluid viscosity properties and auger rotating speeds. The analysis of the stress forces helped to identify the critical conditions were the screw feeder excessive wear or jamming could occur.

biofuels↗

DOE OSTI2024

Harnessing photoautotroph-methanotroph interactions for biogas conversion to fuels and chemicals using binary consortia (Project Final Technical Report)

Industrial, municipal, and agricultural waste streams containing stranded organic carbon represent a significant and underutilized feedstock to produce fuels and chemicals. With anaerobic digestion deployed at large scales to capture organic waste streams, over 6 million tons of biogas are available today. However, the utilization of biogas represents a significant challenge due to its low pressure and presence of contaminants such as H 2 S, ammonia, and volatile organic carbon compounds. To tap into this immense potential, effective biotechnologies that co-utilize both CO 2 and CH 4 are needed. Recent studies demonstrated that, in nature, microbial communities have developed a highly efficient way to recover energy and capture carbon from both CH 4 and CO 2 through metabolic coupling of methane oxidation to oxygenic photosynthesis. Using two synthetic methanotroph – photoautotroph (M-P) co-cultures that exhibit stable growth under a broad range of cultivation conditions, in this project we proposed to harness the interspecies interactions within these cocultures for biogas conversion to fuels and chemicals. To facilitate this overarching objective, we aim to develop experimental and computational tools to gain qualitative and quantitative understandings on the interactions and dynamics of the coculture at both systems and molecular levels, and to validate our findings through experiments and mutant development. The fundamental understanding on the interactions and dynamics of the photoautotroph-methanotroph will lay the foundation for the design and optimization of synthetic binary consortia for production of fuels and chemicals from biogas. We expect the knowledge gained from this project may be generally applicable to other cross-feeding binary consortium, and the tools developed can be adapted to study the interactions and dynamics of other multi-organism platforms.

09 BIOMASS FUELS↗

NASA NTRS2008

1KW Power Transmission Using Wireless Acoustic-Electric Feed-Through (WAEF)

A variety of space applications require the delivery of power into sealed structures. Since the structural integrity can be degraded by holes for cabling we present an alternative method of delivering power and information using stress waves to the internal space of a sealed structure. One particular application of this technology is in sample return missions where it is critical to preserve the sample integrity and to prevent earth contamination. Therefore, the container has to be hermetically sealed and the integrity of the seal must be monitored in order to insure to a high degree of reliability the integrity of the sample return vessel. In this study we investigated the use of piezoelectric acoustic-electric power feed-through devices to transfer electric power wirelessly through a solid wall by using elastic or acoustic waves. The technology is applicable to a range of space and terrestrial applications where power is required by electronic equipment inside sealed containers, vacuum or pressure vessels, etc., where holes in the wall are prohibitive or may result in significant structural performance degradation or unnecessarily complex designs. To meet requirements of higher power applications, the feasibility to transfer kilowatts level power was investigated. Pre-stressed longitudinal piezoelectric feed-through devices were analyzed by finite element models and an equivalent circuit model was developed to predict the power transfer characteristics to different electric loads. Based on the results of the analysis a prototype device was designed, fabricated and a demonstration of the transmission of electric power up to 1.068-kW was successfully conducted. Efficiencies in the 80-90% range were also demonstrated and methods to increase the efficiency further are currently being considered.

pressure vessels↗

DOE OSTI2020

Off-gas rhenium capture and recovery in a laboratory-scale melter

Not Available

Dixon, Derek R.↗

DOE OSTI2024

Experimental and Theoretical Evaluation of Feed Flow Collar Design for Shell Fed Hollow Fiber Membrane Modules

An experimental and theoretical study of module collar design is presented here. Hollow fiber membranes are prepared by dip coating a poly(vinylidene) (PVDF) support with a polydimethylsiloxane (PDMS) gutter layer and a Pebax 2533 selective layer. Fiber bundles with a well-defined fiber packing are prepared using a 3D printed module. A parallel fiber bundle consisting of 4-9 uniformly spaced fibers is created with printed tabs that align the fibers and create a tubesheet. The tabs are sealed within a printed case that possesses a series of external ports for gas introduction and removal. Uniquely, both port location and the use of a collar to assist fluid distribution in the shell can be varied for the same fiber bundle. Experimental measurements are compared to computational fluid dynamics (CFD) simulations. The experimental module design allows high-fidelity representation of the fiber bundle and module case in the simulations. Comparisons between experiment and simulation are in good agreement over a broad range of experimental conditions. The detrimental effect of having ports located too close, leading to stagnation regions, is captured as well as the beneficial effects of using a collar for shell-side fluid distribution around the fiber bundle. Such results help validate the use of CFD to develop high-performance module designs.

Tran, Thien↗

NASA NTRS1975

Design of an offset fed scanning antenna for the shuttle imaging microwave system

A design study is described for a mechanically scanned offset fed parabolic torus reflector antenna having a 4m x 2m aperture for simultaneous use at eleven frequency channels from UHF to millimeter wavelengths. A design for the antenna is presented utilizing dipole and horn feeds at the low frequencies and a Gregorian aberration correcting subreflector system for feeding the torus at the high frequencies. The results and details of a theroetical study based on geometrical optics performed to evaluate the high frequency design and the results of an experimental study involving a one-tenth scale model for evaluation of the low-frequency behavior are given. Beam efficiencies, antenna patterns, beamwidths and cross polarization levels are presented and these results demonstrate that the antenna concept is viable for the Shuttle Imaging Microwave System requirement.

Gustincic, J. J.↗

NASA NTRS1973

Conical quadreflex antenna analytical study

A method for evaluating the performance of a four-reflection or quadreflex antenna is reported. Geometrical optics was used initially to determine the ideal feed pattern required to produce uniform illumination on the aperture of the conical reflector and the reverse problem of quickly finding the aperture illumination given an arbitrary feed pattern. The knowledge of the aperture illumination makes it possible to compute the antenna efficiency, which is useful for comparing antenna performance during tradeoff studies. Scattering calculations, using physical optics techniques, were then used to more accurately determine the performance of a specific design.

Cramer, P. W., Jr.↗

NASA NTRS1989

Rigorous analysis of a circular patch antenna excited by a microstrip transmission line

Boundary conditions are enforced on a portion of the microstrip feed line as well as the patch antenna. The integral equation for the unknown currents on the antenna and feed is solved by applying the Galerkin method of moments in the Fourier transform domain. The validity of the solution is tested by comparison of computed results with experimental data. The theoretical treatment proves to be applicable to the most common feeding arrangements, namely, the direct edge-feed and proximity coupling excitation. In the latter case, two-layer substrates having distinct dielectric constants are studied. The purpose of the study is to deduce, for a given overall substrate thickness, the smallest line-ground plane separation for which a match of the radiator to the feed line is still possible. The advantages of such a configuration are discussed.

Davidovitz, Marat↗

DOE OSTI2021

Spent Crystalline Silicotitanate Storage Study—Post AP-105DF Processing

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2021

Spent Crystalline Silicotitanate Storage Study—Post AP-105DF Processing

A Tank-Side Cesium Removal (TSCR) system is under development by Washington River Protection Solutions to support initial production of immobilized low-activity waste (LAW) by feeding Hanford tank supernate from tank farms to the Hanford Waste Treatment and Immobilization Plant (WTP) LAW Facility. Tank waste supernate will be filtered to remove suspended solids and then Cs will be removed by processing it through crystalline silicotitanate (CST) ion exchange media manufactured by Honeywell UOP, LLC. The Cs-loaded CST columns will be stored indefinitely, with a goal of eventual CST removal and treatment. Thus, the spent CST needs to be recoverable after undetermined storage time. Previous testing with AP-105 simulant showed that rinsing the CST bed with 3 bed volumes (1.4 apparatus volumes [AVs]) of 0.1 M NaOH resulted in a dried bed that maintained flow characteristics indicative of ease of recovery. This study explored the intermediate conditions (between feed dried in place and the 1.4 AVs of 0.1 M NaOH rinse) to evaluate CST bed properties after: 1) stoppage with feed in place; 2) stoppage after draining feed; 3) stoppage after 0.7 AV of 0.1 M NaOH rinse through column; 4) stoppage after 1.5 AVs of 0.1 M NaOH rinse through column. Post processing, each column was heated at 50 °C for 19 days under pseudo-storage conditions to simulate the expected dried and stored CST bed conditions. Testing was conducted at the small scale (12-mL bed volume); actual, Cs-depleted, AP-105 tank waste was used as the feed. Post-dried CST bed physical properties (angle of repose and penetration depth) were measured to evaluate how CST moved and flowed. All process stop-conditions resulted in a solidified CST bed except for the final condition, 1.5 AVs of 0.1 M NaOH rinse. At this small scale, the three CST beds presented an issue for retrievability after the short storage period (19 days at 50 °C). The latter case confirmed the results from simulant testing. The testing was intended to provide a preliminary assessment of issues that may arise from desiccation of CST during storage with the indicated salt solutions in place. Since these were small-scale tests, the processing system did not scale to full scale conditions exactly; however, the tests did provide insight into the impact on the dried and stored CST bed after stopping processing at an earlier step (upset condition) than normal. These results indicate that if an upset condition occurs at TSCR, a dilute hydroxide rinse should be considered before the CST dries from internal heating.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2025

A comparison of ceramic and carbon-based reductants for vitrification of low-activity waste

Sucrose is the current baseline additive at the Hanford Waste Treatment and Immobilization Plant in Washington, USA to control foaming during waste feed to glass transitions and the redox state of the glass melt. Alternative reductants are being investigated to alleviate strain on effluent treatment from toxic acetonitrile production from incomplete combustion of sucrose. This study evaluates ceramic additive options including B4C, B6Si, SiC and VB2 in simulated low-activity waste feed, as well as coke dust, probing the feed volume expansion during melting as well as the gas evolution. All alternative reductant options examined significantly reduced acetonitrile production, however there was variability in their effectiveness as foam-reducing agents. VB2 and coke at the appropriate ratios were similarly effective as sucrose in controlling both foam volume and glass redox state, but with considerably less acetonitrile production. B4C, B6Si and SiC showed more promising foam control and very little acetonitrile production, however all of the final glasses were over reduced, i.e., Fe2+/FeT = 0.5. These alternative reductant studies provide operational flexibility to the operation of the vitrification plant, as well as options for alternative raw materials in industrial glass melting.

Rigby, Jessica C. (ORCID:0000000235719977)↗

NASA NTRS1994

The Influence of Sound Cues on the Maintenance of Temporal Organization in the Sprague-Dawley Rat

Temporal organization is a fundamental property of living matter. From single cells to complex animals including man, most physiological systems undergo daily periodic changes in concert with environmental cues (e.g., light, temperature etc.). It is known that pulsed Environmental synchronizers, zeitgebers, (e.g. light) can modify rhythm parameters. Rhythm stability is a necessary requirement for most animal experiments. The extent to which sound can influence the circadian system of laboratory rats is poorly understood. This has implications to animal habitats in the novel environments of the Space-Laboratory or Space Station. A series of three white noise (88+/-0.82 db) zeitgeber experiments were conducted (n=6/experiment).The sound cue was introduced in the circadian free-running phase (DD-NQ) and in one additional case sound was added to the usual photoperiod (12L:12D) to determine masking effects. Circadian rhythm parameters of drinking frequency, feeding frequency, and gross locomotor activity were continuously monitored. Data analysis for these studies included macroscopic and microscopic methods. Raster plots to visually detect entrainment versus free-running period, were plotted for each animal, for all three parameters, during all sound perturbation tested. These data were processed through a series of detrending (robust locally weighted regression analyses) and complex demodulation analyses. In summary, these findings show that periodic "white" noise "influences" the rats circadian system but does not "entrain" the feeding, drinking or locomotor activity rhythms.

Winget, C. M.↗

DOE OSTI2025

Impact of nutritional history, prey quality, and quantity on grazing and photophysiological responses in the mixoplanktonic dinoflagellate Karenia brevis

The mixotrophic toxic dinoflagellate Karenia brevis forms red tides almost annually along Florida's Gulf coast. We hypothesize that the nutritional status and abundance of its prey, the picocyanobacterium Synechococcus , will affect its feeding rates and growth responses, with implications for bloom dynamics. This study investigated how prey nutritional quality and quantity (absolute and relative) impact grazing rates by K. brevis initially exponentially growing and in nitrogen (N)-limited conditions, and how grazing, in turn, affects the photophysiological responses of predator and prey. Prey quality was manipulated by providing Synechococcus grown under different ratios of N : phosphorus (P). Synechococcus quality did not significantly affect ingestion rates (measured as prey death rate) but grazing rates increased with increasing prey : grazer ratios (R 2 = 0.7). Compared to control, the growth of exponentially growing grazers doubled when Synechococcus was provided, whereas there was no growth enhancement when Synechococcus of varying qualities was provided to N-limited, chemostat-seeded grazers. Despite this doubled growth, 15 N labeling of the prey and nanoscale secondary ion mass spectrometry (nanoSIMS) detected low Synechococcus -N transfer into grazer biomass after 3 d (< 1% on a cell basis). This suggests the potential of grazers benefiting from alternative N sources (e.g., microbiome-N) or other constituents (e.g., vitamins or metals) not measured in this study. Prey photosynthetic efficiency declined under grazing conditions, demonstrating that grazers can directly affect prey abundance through grazing and indirectly affect prey photophysiology, potentially via allelopathy, supporting previous findings of an inverse relationship between grazers and prey along the Florida Gulf Coast.

Ahn, So Hyun [Univ. of Maryland, Cambridge, MD (Un↗

DOE OSTI2021

Benchmarking the Performance of Neuromorphic and Spiking Neural Network Simulators

Software simulators play a critical role in the development of new algorithms and system architectures in any field of engineering. Neuromorphic computing, which has shown potential in building brain-inspired energy-efficient hardware, suffers a slow-down in the development cycle due to a lack of flexible and easy-to-use simulators of either neuromorphic hardware itself or of spiking neural networks (SNNs), the type of neural network computation executed on most neuromorphic systems. While there are several openly available neuromorphic or SNN simulation packages developed by a variety of research groups, they have mostly targeted computational neuroscience simulations, and only a few have targeted small-scale machine learning tasks with SNNs. Evaluations or comparisons of these simulators have often targeted computational neuroscience-style workloads. In this work, we seek to evaluate the performance of several publicly available SNN simulators with respect to non-computational neuroscience workloads, in terms of speed, flexibility, and scalability. We evaluate the performance of the NEST, Brian2, Brian2GeNN, BindsNET and Nengo packages under a common front-end neuromorphic framework. Our evaluation tasks include a variety of different network architectures and workload types to mimic the computation common in different algorithms, including feed-forward network inference, genetic algorithms, and reservoir computing. We also study the scalability of each of these simulators when running on different computing hardware, from single core CPU workstations to multi-node supercomputers. Our results show that the BindsNET simulator has the best speed and scalability for most of the SNN workloads (sparse, dense, and layered SNN architectures) on a single core CPU. However, when comparing the simulators leveraging the GPU capabilities, Brian2GeNN outperforms the others for these workloads in terms of scalability. NEST performs the best for small sparse networks and is also the most flexible simulator in terms of reconfiguration capability NEST shows a speedup of at least 2x compared to the other packages when running evolutionary algorithms for SNNs. The multi-node and multi-thread capabilities of NEST show at least 2x speedup compared to the rest of the simulators (single core CPU or GPU based simulators) for large and sparse networks. We conclude our work by providing a set of recommendations on the suitability of employing these simulators for different tasks and scales of operations. We also present the characteristics for a future generic ideal SNN simulator for different neuromorphic computing workloads.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2020

Metagenomic Insight into Environmentally Challenged Methane-Fed Microbial Communities

In this study, we aimed to investigate, through high-resolution metagenomics and metatranscriptomics, the composition and the trajectories of microbial communities originating from a natural sample, fed exclusively with methane, over 14 weeks of laboratory incubation. This study builds on our prior data, suggesting that multiple functional guilds feed on methane, likely through guild-to-guild carbon transfer, and potentially through intraguild and intraspecies interactions. We observed that, under two simulated dioxygen partial pressures—low versus high—community trajectories were different, with considerable variability among the replicates. In all microcosms, four major functional guilds were prominently present, representing Methylococcaceae (the true methanotrophs), Methylophilaceae (the nonmethanotrophic methylotrophs), Burkholderiales, and Bacteroidetes. Additional functional guilds were detected in multiple samples, such as members of Opitutae, as well as the predatory species, suggesting additional complexity for methane-oxidizing communities. Metatranscriptomic analysis suggested simultaneous expression of the two alternative types of methanol dehydrogenases in both Methylococcaceae and Methylophilaceae, while high expression of the oxidative/nitrosative stress response genes suggested competition for dioxygen among the community members. The transcriptomic analysis further suggested that Burkholderiales likely feed on acetate that is produced by Methylococcaceae under hypoxic conditions, while Bacteroidetes likely feed on biopolymers produced by both Methylococcaceae and Methylophilaceae.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS1973

Diagnostics of sources of disturbances and distribution of vibrations over the width of a tape in tape-feed mechanisms

Disturbances created by certain assemblies and components of tape-feed mechanisms (TFM) and acting on a moving magnetic tape are studied. The method, based on elements of digital logic, is established by stress-strain diagrams of the longitudinal deformations and vibrations across the width of a magnetic tape. Experimental studies were carried out for determination of the functional relationships of longitudinal deformations in a section of magnetic tape to the magnitude of roller play, tension vibrations rate of movement, and elasticity of magnetic tapes. A block diagram of the measurements is shown. Appropriate digital computer algorithms and programs were proposed for statistical analysis of the data obtained. Estimates of the mathematical expectation, dispersion, intercorrelation function, energy spectral density, and distribution pattern of the random process values were calculated.

Kenstavichyus, A. B. B.↗

NASA NTRS1997

Feasibility Study of Optically Transparent Microstrip Patch Antenna

The paper presents a feasibility study on optically transparent patch antennas with microstrip line and probe feeds. The two antennas operate at 2.3 GHz and 19.5 GHz respectively. They are constructed from a thin sheet of clear polyester with an AgHT-8 optically transparent conductive coating. The experimental results show good radiation patterns and input impedance match. The antennas have potential applications in mobile wireless communications.

Simons, Rainee N.↗

NASA NTRS2002

Enzyme-based CO2 capture for advanced life support

Elevated CO2 levels in air can lead to impaired functioning and even death to humans. Control of CO2 is critical in confined spaces that have little physical or biological buffering capacity (e.g., spacecraft, submarines, or aircraft). A novel enzyme-based contained liquid membrane bioreactor was designed for CO2 capture and certain application cases are reported in this article. The results show that the liquid layer accounts for the major transport resistance. With addition of carbonic anhydrase, the transport resistance decreased by 71%. Volatile organic compounds of the type and concentration expected to be present in either the crew cabin or a plant growth chamber did not influence carbonic anhydrase activity or reactor operation during 1-day operation. Alternative sweep method studies, examined as a means of eliminating consumables, showed that the feed gas could be used successfully in a bypass mode when combined with medium vacuum pressure (-85 kPa) to achieve CO2 separation comparable to that with an inert sweep gas. The reactor exhibited a selectivity for CO2 versus N2 of 1400:1 and CO2 versus O2 is 866:1. The CO2 permeance was 1.44 x 10(-7) mol m-2 Pa-1 s-1 (4.3 x 10(-4) cm3 cm-2 s-1 cmHg-1) at a feed concentration of 0.1% CO2. These data show that the enzyme-based contained liquid membrane is a promising candidate technology that may be suitable for NASA applications to control CO2 in the crew or plant chambers.

NASA Discipline Life Support Systems↗