Search NASA⌕ Search

SEARCH · Search NASA

Results for “Output”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Surrogate Model of Flexible Research Platform EnergyPlus Models to Enable Sensitivity Analysis

This letter report describes the surrogate models developed from the EnergyPlus model of Oak Ridge National Laboratory’s Flexible Research Platform. Two data-driven black-box models were developed, and the outputs of the surrogate models were compared with the EnergyPlus model. The two models developed are a multilayer perceptron deep learning model, and a long short-term memory (LSTM) neural network model. The three factors for selecting the black-box models are scalability, computation time, and accuracy. A total of 107 input variables were the dominant variables in determining the outputs of building energy consumptions and thermal comfort. A total of 54 output variables were identified as the prediction targets, including the system- and zone-level outputs. The large set of the simulation cases were generated by integrating sensor errors into an emulator based on EnergyPlus and Python EMS, which includes advanced control sequences from ASHRAE Guideline 36-2018: High-Performance Sequences of Operation. The surrogate models were developed based on a set of large-scale simulation runs (i.e., 4,000 runs) on a cloud platform. The comparison analysis shows that the two black-box models had good accuracy for predicting new outputs for sensitivity analysis using the root mean square error metric. As a next step, the developed surrogate models will be used to perform sensitivity analysis for different sensor impacts (e.g., sensor types, sensor locations).

42 ENGINEERING↗
DOE OSTI2023

Spatio-Temporal Surrogates for Interaction of a Jet with High Explosives: Part II - Clustering Extremely High-Dimensional Grid-Based Data

Building an accurate surrogate model for the spatio-temporal outputs of a computer simulation is a challenging task. A simple approach to improve the accuracy of the surrogate is to cluster the outputs based on similarity and build a separate surrogate model for each cluster. This clustering is relatively straightforward when the output at each time step is of moderate size. However, when the spatial domain is represented by a large number of grid points, numbering in the millions, the clustering of the data becomes more challenging. In this report, we consider output data from simulations of a jet interacting with high explosives. These data are available on spatial domains of different sizes, at grid points that vary in their spatial coordinates, and in a format that distributes the output across multiple files at each time step of the simulation. We first describe how we bring these data into a consistent format prior to clustering. Borrowing the idea of random projections from data mining, we reduce the dimension of our data by a factor of thousand, making it possible to use the iterative k-means method for clustering. We show how we can use the randomness of both the random projections, and the choice of initial centroids in k-means clustering, to determine the number of clusters in our data set. Our approach makes clustering of extremely high dimensional data tractable, generating meaningful cluster assignments for our problem, despite the approximation introduced in the random projections.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

VARI3D & PERSENT: Perturbation and Sensitivity Analysis

The nodal diffusion method is one of the most widely used approaches in modern reactor analysis. In the nodal diffusion method, a coarse multi-group set of “homogenized” parameters is constructed such that the complex geometry of a reactor core along with the energy dependence of neutron and gamma ray cross sections in a nuclear reactor are conserved in the simpler geometry. The homogenization is typically done on a fuel assembly level as is the case in the DIF3D code developed at Argonne National Laboratory. The nodal methodology is used primarily to predict fuel cycle behavior of nuclear systems of which there is a substantial amount of validation in the literature. Another use of the nodal method is to obtain reactivity coefficients and kinetics parameters for use in a safety analysis of a given nuclear reactor. While there are many ways to obtain reactivity worth and kinetics parameters, the work presented in this manuscript is unique as it provides the user with the ability to compute reactivity worths, kinetics parameters, and cross section sensitivities with a Cartesian and hexagonal geometry based transport code. This manuscript serves as a single manual for two separate codes: VARI3D and PERSENT. The VARI3D code (VARIational 3D) is based upon the classic finite difference diffusion theory solver available in DIF3D. The PERSENT code (PERturbation and SENitivity for Transport) is based upon the variational nodal method employed in DIF3D termed VARIANT. The VARIANT solver was added to DIF3D in 1995 and has seen continued development and use for the last 18 years. Because VARI3D primarily uses deprecated coding practices, rather than incorporating the perturbation and sensitivity treatments for transport within VARI3D, a new coding development was built using modern Fortran coding. The primary purpose of this manual is to describe the theory behind PERSENT (and by convenience, that of VARI3D) and discuss the input and output of PERSENT along with giving potential users an idea of how to use it. While this manuscript does describe the input and output of VARI3D, the PERSENT code is intended to be the replacement capability of VARI3D as PERSENT can generate nearly identical (if not superior) diffusion theory results. In this manuscript, the relevant aspects of generalized perturbation theory and exact perturbation theory that apply to both VARI3D and PERSENT are covered. The input and output of VARI3D is displayed by excerpting several of the example problems. Similarly, the input and output of PERSENT is displayed along with tips on how best to use the code. Note that the input and output of the inhomogeneous solver wrapped around DIF3D (DIF3D_IFS) is also discussed as it is needed to carry out some of the sensitivities in PERSENT such as reaction rate ratios. This manuscript describes several perturbation and sensitivity problems, and the results computed using PERSENT. From these sections, potential users should find that PERSENT provides not only the typical tables of numbers desired in perturbation and sensitivity analysis work, but also can visually plot the result for a more thorough understanding of the space and energy distribution (Section 5). Overall, PERSENT is observed to produce accurate reactivity worths and sensitivities for the displayed set of test problems and clearly demonstrates the need to have a transport-based sensitivity capability as evident from the thousands of percent errors observed in the 21-group hexagonal fast reactor problem (covered in Section 7). The uncertainty calculation capability is described in Section 3 and demonstrated in Section 7.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Final Report On Non-Intrusive Load Monitoring Of Welding Processes

The conventional method of weld process monitoring is to monitor the process output electrical power close to the point of welding. Non-Intrusive Load Monitoring (NILM) describes the method of monitoring primary or utility electrical power into a welding process well away from the point of welding. The objective of this project was to determine if there is sufficient information within the welding process input power to understand process output power characteristics, and, if so, determine if there is sufficient resolution within the input electrical characteristics to infer some measures of weld quality. To understand the relationship between process input and output power, both input and output power were monitored for two welding processes (GMAW and GTAW) and two different power source types (inverter and SCR). Welds were made with and without intentional disturbances. The results showed that there is a strong correlation between input and output power and that the influence of process disturbances are evident within the input power. A simple method using input power only was devised and successfully demonstrated to discriminate between a weld made with no intentional disturbance (a nominal weld) from a weld made with an intentional disturbance (off-nominal weld). The primary conclusions of this work is that NILM of process input power is sensitive to process disturbances that could influence weld quality and that the approach warrants additional study.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A Distributed Reinforcement Learning Yaw Control Approach for Wind Farm Energy Capture Maximization: Preprint

In this paper, we present a reinforcement-learning based distributed approach to wind farm energy capture maximization using yaw control, also known as wake steering. In order to maximize the power output of a wind farm, it is often necessary for individual turbines to decrease their own power output through yaw misalignment so as to deflect their wakes away from downstream turbines. Although using model-based methods to achieve yaw misalignment is one option, a model-free method might be better suited to incorporate factors that are difficult to model or changing conditions. We propose an algorithm that adapts concepts of temporal difference reinforcement learning distributed to a multi-agent environment that allows individual turbines to act so as to optimize overall wind farm output and react to unforeseen disturbances.

controls↗
DOE OSTI2024

BSEC VPRM 10m Hourly Biogenic Fluxes in Baltimore (2021)

Model outputs from the Vegetation Photosynthesis and Respiration Model (VPRM: version from Horne et al. in prep). Model remote sensing inputs come from Sential 2-derived EVI and LSWI. Model meteorological inputs for two-meter air temperature and shortwave incoming come from the BSEC WRF 2021 Control Run (Foust, W. 2023). Plant functional Types (PFTs) are spatially classified using the Chesapeake Bay Program 2018 land use land cover product. The final biogenic flux (µmol CO2 m^-2 s^-1) outputs of NEE, RESP, and GEE are a weighted average based on the portion of PFTs within the cell. Individual PFT outputs are saved inside PFT directories (e.g., Crops, Grass, etc.) inside the specific month directory. Model outputs are denoted as a negative flux into the land system (i.e., photosynthesis) and a positive flux as a net release into the overlying atmosphere. Respiration (RESP) fluxes are positive and combine heterotrophic (only soil) and autotrophic sources. Gross ecosystem exchange (GEE) is a negative flux driven by only photosynthetic activity from vegetation, and the Net ecosystem exchange (NEE) is the sum of the two (i.e., NEE=RESP+GEE). Data Characteristics Spatial Resolution: 10m Temporal Resolution: Hourly File Format: VPRM_ _BSEC. .tif (Hour is in UTC) For more information on the model results, please email Jason Horne (jph6488@psu.edu). References: Foust, W. (2023). BSEC WRF 2021 Control Run Output (v0.1.0) [Data set]. MSD-LIVE Data Repository. https://data.msdlive.org/records/m0e6m-vvq17

Baltimore↗
DOE OSTI2021

Adaptive neural network management system

A method and computer system for managing a neural network. Data is sent into an input layer in a portion of layers of nodes in the neural network. The data moves on an encode path through the portion such that an output layer in the portion outputs encoded data. The encoded data is sent into the output layer on a decode path through the portion back to the input layer to obtain a reconstruction of the data by the input layer. A determination is made as to whether an undesired amount of error has occurred in the output layer based on the data sent into the input layer and the reconstruction of the data. A number of new nodes is added to the output layer when a determination is present that the undesired amount of the error occurred, enabling reducing the error using the number of the new nodes.

Draelos, Timothy J.↗
DOE OSTI2021

Smart controller with phantom inductor current sensing for switched mode power supplies

Voltage on the output terminal of an inductor is obtained as a first input signal to a control block (CB); the inductor has an input terminal connected to a power switch and driver block at a switching node. A sense input voltage is obtained on an output terminal of a sensing circuit that is not directly connected to the switching node, as a second input signal to the CB. A voltage is generated on a first output terminal of the CB and is selected such that the CB can use its first and second input signals to infer the current through the inductor. A pulse width modulation (PWM) signal is generated on a second output terminal of the CB, based on the inferred current through the inductor; the second output signal from the CB is provided to a PWM input terminal of the power switch and driver block.

Zhang, Xin↗
DOE OSTI2023

Continuous dithered waveform averaging for high-fidelity digitization of repetitive signals

Methods and devices for digitizing an analog repetitive signal using waveform averaging are described. An example method includes generating a time-varying dither signal, receiving the analog repetitive signal comprising multiple instances of a waveform, wherein each waveform has a waveform duration, wherein an average of the time-varying dither signal over multiple waveform durations is substantially zero, and wherein the time-varying dither signal varies over each waveform duration, generating a timing alignment, combining each waveform with the corresponding portion of the time-varying dither signal over each waveform duration to produce an analog output signal, converting the analog output signal to a digital output signal, and producing, based on the timing alignment, a digital averaged signal based on averaging the multiple instances of the waveform in the analog output signal, wherein the timing alignment is used to align the multiple instances of the waveform in the analog output signal.

Buckley, Brandon Walter↗
DOE OSTI2023

Position sensing circuit for an electrostatically driven MEMS device

The present disclosure relates to a system for detecting movement of a microelectromechanical system (MEMS) device. The system uses a drive voltage signal source for generating a low frequency drive voltage signal for driving the MEMS device. An excitation signal source may be used for generating an excitation signal which is also applied to the MEMS device. The excitation signal has a frequency which is above a physical response capability of the MEMS device, such that operation of the MEMS device is not significantly affected by the excitation signal. A sensing impedance is used to help generate a signal which is responsive to the capacitance of the MEMS device. The capacitance of the MEMS device changes in response to movement of the MEMS device. An output subsystem is provided which responds to changes sensed by the sensing impedance, and which produces an output voltage signal. A filter filters the output voltage signal to produce a filtered output voltage signal. The filtered output voltage signal is indicative of a position of the MEMS device.

Panas, Robert Matthew↗
DOE OSTI2023

Kernel-based global sensitivity analysis obtained from a single data set

Results from global sensitivity analysis (GSA) often guide the understanding of complicated input–output systems. Kernel-based GSA methods have recently been proposed for their capability of treating a broad scope of complex systems. In this paper, we develop a new set of kernel GSA tools when only a single set of input–output data is available. Three key advances are made: (1) A new numerical estimator is proposed that demonstrates an empirical improvement over previous procedures. (2) A computational method for generating inner statistical functions from a single data set is presented. (3) A theoretical extension is made to define conditional sensitivity indices, which reveal the degree that the inputs carry shared information about the output when inherent input–input correlations are present. Utilizing these conditional sensitivity indices, a decomposition is derived for the output uncertainty based on what is called the optimal learning sequence of the input variables, which remains consistent when correlations exist between the input variables. Further, while these advances cover a range of GSA subjects, a common single data set numerical solution is provided by a technique known as the conditional mean embedding of distributions. The new methodology is implemented on benchmark systems to demonstrate the provided insights.

42 ENGINEERING↗
DOE OSTI2020

Paralleling of LLC Resonant Converters

The LLC resonant converter is a popular, variable switching frequency DC-DC converter that may be controlled using two methods: charge and frequency control. In this paper, the application of LLC resonant converters to input-parallel, output-parallel system is studied. In this respect, the models of output-port I-V characteristics and small-signal output impedance of the charge controlled LLC converter are proposed. In addition, a mathematical framework is developed for droop-based paralleled DC-DC systems. Here, it distinctly identifies the output DC voltage and circulating current modes of stability, even in systems comprising of non-identical converters.

42 ENGINEERING↗
DOE OSTI2020

Application of radiochromic gel dosimetry to commissioning of a megavoltage research linear accelerator for small–field animal irradiation studies

To develop and implement an efficient and accurate commissioning procedure for small-field static beam animal irradiation studies on an MV research linear accelerator (Linatron-M9) using radiochromic gel dosimetry. The research linear accelerator (Linatron-M9) is a 9 MV linac with a static fixed collimator opening of 5.08 cm diameter. Lead collimators were manually placed to create smaller fields of 2 × 2 cm 2 , 1 × 1 cm 2 , and 0.5 × 0.5 cm 2 . Relative dosimetry measurements were performed, including profiles, percent depth dose (PDD) curves, beam divergence, and relative output factors using various dosimetry tools, including a small volume ionization chamber (A14), GAFCHROMIC™ EBT3 film, and Clearview gel dosimeters. The gel dosimeter was used to provide a 3D volumetric reference of the irradiated fields. The Linatron profiles and relative output factors were extracted at a reference depth of 2 cm with the output factor measured relative to the 2 × 2 cm 2 reference field. Absolute dosimetry was performed using A14 ionization chamber measurements, which were verified using a national standards laboratory remote dosimetry service. Absolute dosimetry measurements were confirmed within 1.4% (k = 2, 95% confidence = 5%). The relative output factor of the small fields measured with films and gels agreed with a maximum relative percent error difference between the two methods of 1.1 % for the 1 × 1 cm 2 field and 4.3 % for the 0.5 × 0.5 cm 2 field. These relative errors were primarily due to the variability in the collimator positioning. The measured beam profiles demonstrated excellent agreement for beam size (measured as FWHM), within approximately 0.8 mm (or less). Film measurements were more accurate in the penumbra region due to the film’s finer resolution compared with the gel dosimeter. Following the van Dyk criteria, the PDD values of the film and gel measurements agree within 11% in the buildup region starting from 0.5 cm depth and within 2.6 % beyond maximum dose and into the fall-off region for depths up to 5 cm. The 2D beam profile isodose lines agree within 0.5 mm in all regions for the 0.5 × 0.5 cm 2 and the 1 × 1 cm 2 fields and within 1 mm for the larger field of 2 × 2 cm 2 . The 2D PDD curves agree within approximately 2% of the maximum in the typical therapy region (1–4 cm) for the 1 × 1 cm 2 and 2 × 2 cm 2 and within 5% for the 0.5 × 0.5 cm 2 field. This work provides a commissioning process to measure the beam characteristics of a fixed beam MV accelerator with detailed dosimetric evaluation for its implementation in megavoltage small animal irradiation studies. Radiochromic gel dosimeters are efficient small-field relative dosimetry tools providing 3D dose measurements allowing for full representation of dose, dosimeter misalignment corrections and high reproducibility with low inter-dosimeter variability. Altogether, radiochromic gels are valuable for fast, full relative dosimetry commissioning in comparison to films for application in high-energy small-field animal irradiation studies.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2023

Fault isolation and fault-tolerant control for nonlinear stochastic distribution control systems with multiplicative faults

Here, in this paper, a fault isolation, diagnosis and fault tolerant control algorithm is proposed for nonlinear multiple multiplicative faults stochastic distribution control systems employing Takagi–Sugeno fuzzy system. To obtain the detailed fault information, a fault detection algorithm is introduced to discover the fault occurrence time. Then a fault isolation observer is built to produce the residual, and the error system is separated to subsystems affected only by disturbance and multiplicative faults. Moreover, a fault estimation scheme is presented to obtain the fault magnitude information. When faults occur, the system output probability density function will deviate from the desired distribution. So the model predictive control fault tolerant control scheme is needed to minimize the impact of faults as much as possible to make sure that the post fault output probability density function track the desired probability density function. The validity of the designed algorithm is demonstrated through a simulation example, where the fault tolerant control algorithm ensures that the system output probability density function still track the given output probability density function despite the complex case of multiple multiplicative faults occurring simultaneously.

42 ENGINEERING↗
DOE OSTI2026

Input specific neural networks

Neural networks have emerged as powerful tools for mapping between inputs and outputs. However, their black-box nature limits the ability to encode or impose specific structural relationships between inputs and outputs. Many scientific and engineering problems, such as constitutive modeling in solid mechanics, require networks that can enforce convexity, monotonicity, or other structural constraints to ensure physical consistency. Here, we introduce the Input Specific Neural Network (ISNN), a new architecture that enables multiple, distinct constraints to be imposed on different input subsets for scalar-valued outputs. This framework unifies convex, monotone–convex, monotone, and arbitrary mappings within a single network for the first time. Two ISNN architectures with analytical first- and second-order derivatives are developed. We demonstrate the performance on synthetic toy problems, inverse problems in isotropic hyperelasticity, and finite element simulations. ISNNs achieve improved extrapolation behavior, require fewer invariant inputs than standard input convex networks for polyconvex potentials, and enable significant computational savings via manual differentiation. We also show how ISNNs can be used to learn structural relationships between inputs and outputs via a binary gating mechanism. Particularly, ISNNs are employed to model a homogenized anisotropic free energy potential in a decoupled multiscale setting. The network learns whether or not the potential should be modeled as polyconvex and retains only the relevant layers while using the minimum number of inputs. ISNNs provide a flexible foundation for embedding structural priors into neural networks, enhancing both interpretability and stability. They are broadly applicable across computational mechanics and other scientific domains requiring constrained functional relationships.

Jadoon, Asghar A. [Univ. of Texas, Austin, TX (Uni↗
DOE OSTI2021

Study of the Effect of Reflections on High-Power, 110-GHz Pulsed Gyrotron Operation

The effect of reflection is studied experimentally and theoretically on a high-power 110-GHz gyrotron operating in the TE 22,6 mode in 3 μs pulses at 96 kV, 40 A. The experimental setup allows variation of the reflected power from 0 to 33% over a range of gyrotron operating conditions. The phase of the reflection is varied by translating the reflector along the axis. Operating at a higher efficiency point, at 4.40 T with 940kW of output power, reflected power exceeding 11% causes a switch from operation in the TE 22,6 to simultaneous operation in the TE 22,6 and TE 21,6 modes with a large decrease of the total gyrotron output power. This switching effect is in good agreement with simulations using the MAGY code. Operating at a more stable point, 4.44 T with 580kW of output power, when the reflection is increased, the output power remains in the TE 22,6 mode but it decreases monotonically with increasing reflection, dropping to 200kW at 33% reflection. Furthermore, at a reflection above 22%, a power modulation at 25 to 30MHz is observed, independent of the phase of the reflected wave. Such a modulated signal may be useful in spectroscopic and other applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Demonstration of a Three-Dimensionally Structured Betavoltaic

In this work, we present a demonstration of a high-aspect ratio, three-dimensionally structured betavoltaic device. High-aspect ratio silicon PIN diodes were used as the semiconductor absorber and 147 PmCl 3 was used as the beta emitter. Three devices were fabricated with 147 Pm activities of 2.4 mCi, 7.4 mCi, and 29.5 mCi. The device with the highest activity produced an initial power output of 200 nW and was monitored over a period of 8 months to observe the current–voltage behavior over time, during which time the output current decreased in accordance with the radioactive half-life of 147 Pm. Small deviations in the output current of a few percent during the long-term measurement were found to be attributable to the humidity in the room where the experiment was done. Furthermore, the output current generated from the devices was 68–77% of the theoretical maximum, indicating significant infiltration of the radioisotope into the ridged structures.

42 ENGINEERING↗
DOE OSTI2025

A resolution independent neural operator

The Deep operator network (DeepONet) is a powerful yet simple neural operator architecture that utilizes two deep neural networks to learn mappings between infinite-dimensional function spaces. This architecture is highly flexible, allowing the evaluation of the solution field at any location within the desired domain. However, it imposes a strict constraint on the input space, requiring all input functions to be discretized at the same locations; this limits its practical applications. Here, in this work, we introduce a general framework for operator learning from input–output data with arbitrary number and locations of sensors. This begins by introducing a resolution-independent DeepONet (RI-DeepONet), enabling it to handle input functions that are arbitrarily, but sufficiently finely, discretized. To this end, we propose two dictionary learning algorithms to adaptively learn a set of appropriate continuous basis functions, parameterized as implicit neural representations (INRs), from correlated signals defined on arbitrary point cloud data. These basis functions are then used to project arbitrary input function data as a point cloud onto an embedding space (i.e., a vector space of finite dimensions) with dimensionality equal to the dictionary size, which can be directly used by DeepONet without any architectural changes. In particular, we utilize sinusoidal representation networks (SIRENs) as trainable INR basis functions. The introduced dictionary learning algorithms are then used in a similar way to learn an appropriate dictionary of basis functions for the output function data, which defines a new neural operator architecture referred to as the R esolution I ndependent N eural O perator (RINO). In the RINO, the operator learning task simplifies to learning a mapping from the coefficients of input basis functions to the coefficients of output basis functions. We demonstrate the robustness and applicability of RINO in handling arbitrarily (but sufficiently richly) sampled input and output functions during both training and inference through several numerical examples.

Deep operator network (DeepONet)↗