Search NASA⌕ Search

SEARCH · Search NASA

Results for “retention”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

The age and petrography of two Luna 20 fragments and inferences for widespread lunar metamorphism.

Ages were determined by the Ar-40/Ar-39 method on two metaclastic rocks returned from the lunar highlands north of Mare Fecunditatis by the Luna 20 probe. Both samples gave very well-defined argon retention ages of 3.90 plus or minus 0.04 AE which are indistinguishable from each other within a resolution of 0.02 AE. Both fragments, 22006 and 22007, are highly recrystallized polymict breccias; there is no evidence of radiogenic Ar-40, and the age almost surely dates the time of recrystallization. The cosmic ray exposure ages of these fragments are similar and high: 900 million years for 22006, 1300 million years for 22007. 22007 also contains substantial trapped argon with a high Ar-40/Ar-36. The Luna 20 results greatly extend the area of the moon's surface exhibiting a well-defined record of metamorphism at 3.9 AE. So far, lunar history in the interval from 4.6 to 3.9 AE is not preserved in the ages of surface rocks. This obliteration suggests lunar-wide metamorphic conditions occurring or terminating at this time as a result of major impacts.

Podosek, F. A.↗
NASA NTRS1973

Helium-uranium dating of corals.

Fanale and Schaeffer (1965) determined He/U ages of corals and other aragonitic fossils, and found that the results generally agreed with independent age estimates. As a more extensive and rigorous test of the reliability of He/U ages of fossil corals, I have determined He/U ages of forty-five independently dated Cenozoic corals. Uranium and thorium isotope compositions and Rn-222 retentivities were also determined as consistency checks. The results indicate that reliable ages are obtained when certain consistency tests are met and specified corrections are made.

Bender, M. L.↗
NASA NTRS1973

Effects of composition on acceleration induced burning-rate augmentation.

The objective of this work was to better define the effects of propellant composition variables on the acceleration induced burning-rate augmentation of solid propellants. The rate augmentation of an aluminized propellant at a given acceleration level was found to be a nonlinear inverse function of the reference or static burning rate and not controlled by binder or catalyst type at a given reference rate. A nonaluminized and a low rate double-base propellant exhibited strong transient rate augmentation due to surface pitting resulting from the retention of hot particles on the propellant surface.

Northam, G. B.↗
NASA NTRS1973

Liquid oxygen-compatible filament-winding matrix resin

Polyurethanes derived from hydroxy terminated polyperfluoro propylene oxide prepolymers were evaluated as matrix resins for filament wound composites which would be exposed to liquid (and 100% gaseous) oxygen environments. A number of structural modifications were brought about by variations in prepolymer molecular weight, and alternative curing agents which allowed retention of the oxygen compatibility. Although satisfactory performance was achieved at sub-ambient temperatures, the derived composites suffered considerable property loss at ambient or slightly elevated temperatures. To attain overall effectiveness of the composite system, upgrading of the polymer thermomechanical properties must first be achieved.

Harrison, E. S.↗
NASA NTRS1974

Development and fabrication of heat-sterilizable inhalation therapy equipment

The development of a completely heat sterilizable intermittent positive pressure breathing (IPPB) ventilator in an effort to reduce the number of hospital acquired infections is reported. After appropriate changes in materials and design were made, six prototype units were fabricated and were successfully field tested in local hospitals. Most components of the modified ventilators are compatible with existing machines. In all but a few instances, such as installation of bacteria-retentive filters and a modified venturi, the change over from non-heat-sterilizable to sterilizable units was accomplished by replacement of heat labile materials with heat stable materials.

Irons, A. S.↗
NASA NTRS1972

Ground magnetometer survey in the Valley of Ten Thousand Smokes, Alaska

A reconnaissance magnetometer survey was conducted with both total- and vertical-field magnetometers. The large, sharp, narrow total magnetic anomalies observed over a zone of relict fumaroles in Broken Mountain Valley showed spectacular agreement with the surficial geology. Such a correlation is a strong indication that accumulations of magnetic minerals have been preserved along these fissure vents at shallow depths. Since large magnetic anomalies were measured near fumarolic markings along all of the traverses, it is proposed that the retention of sublimates along fumarolic vents is common throughout the Valley. The generally concentric contours of the vertical magnetic anomaly at the head of the Valley suggest that the dome of Novarupta is merely the surficial expression of a very massive conical-shaped intrusive centered just northeast of the dome. The magnetometer survey indicates that the pyroclastics in the Valley may be over 150 meters thick. Such an estimate is compatible with the volume of eruptive material needed to compensate for the subsidence surrounding Novarupta as well as a sizable amount of other regional subsidence.

Trible, M. C.↗
NASA NTRS1974

Development of polyphenylquinoxaline graphite composites

This exploratory program was divided into four basic tasks. The initial phase was devoted toward investigating processing variables associated with previously developed PPO resins. These polymers were derived from p-bis(phenyl glyoxalyl)benzene reacted with 3,3'-diamino benzidine and/or 3,3',4,4'-tetramino benzophenone. Four new phenyl quinoxaline polymers were synthesized and characterized in Tasks 2 and 3. These consisted of a hydroxyl group containing PPQ synthesized from 3,3'-diamino benzidine (DAB), m-bis(phenyl glyoxal)benzene and m-bis(p'-hydroxy phenyl glyoxalyl) benzene; a cyano group containing PPQ from the reaction of DAB and p-bis(p'-cyano phenoxy phenyl glyoxalyl)benzene; an end-capped block copolymer; and a polymer from the reaction of 3,3',4,4'-tetraamino benzo phenone and m-bis(phenyl glyoxalyl)benzene. The latter two polymers were chosen for composite studies in the latter two tasks of the program. Mechanical properties of the graphite reinforced PPQ composites were determined over the temperature range of +21 C to 316 C. Flexural strengths of the HMS graphite fiber composites were in excess of 8.97 X 10 to the 8th power N/sq m (130,000 psi) at +21 C (70 F) with over 50% strength retention at +316 C.

Hoggatt, J. T.↗
NASA NTRS1973

In situ detection of microbial respiration in soils and salt flats

Increase in CO2 partial pressures over a desert soil treated with casamino-acids glucose solution correlated with bacterial growth. Few or no increases in numbers of bacteria or CO2 concentrations were noted in similar plots treated with water only or receiving no treatment. Growth in the soil appeared to be severely nutrient limited during the 10 day experiment. Especially rapid growth took place between the third and fifth day, when temperatures ranged from 0 deg. (night) to a maximum of 17.4 deg. (day). Under the conditions of the experiment, intermittent CO2 assay was an insensitive indicator of growth, possibly because of restiction of gas escape by the desert pavement or solution, exchange, or precipitation of carbonate, but more likely because of inefficient sealing of hoods to and below the soil surface. CO2 assay was unable to detect microbial successions. The unpredictable course of these successions, plus unpredictable relative retentions mitigates against assay of organic gases as reliable in situ detection of microbial activity, except perhaps in very alkaline environments such as Owens Lake salts.

Tew, R. W.↗
NASA NTRS1973

Design of propellant acquisition systems for advanced cryogenic space propulsion systems

This paper presents results of work conducted to expand the technology base and evolve practical propellant surface tension acquisition system designs for future cryogenic space vehicles. Surface tension screen device channel flow analysis and supporting tests showed that reasonable mesh sizes could provide the required retention performance. Integrated subsystem studies and development showed that practical and effective screen surface tension acquisition devices could be designed for typical applications, but that other interfacing feed subsystems are often constrained by the design of the particular acquisition device. These constraints may dominate the total feed system performance.

Burge, G. W.↗
NASA NTRS1973

Argon in Apollo 15 green glass spherules /15426/ - Ar-40-Ar-39 age and trapped argon

The results of thermal-release argon analyses of neutron-irradiated green glass spherules separated from the lunar sample 15426 are discussed. It is shown that the gas-retention age determined by the Ar-40-Ar-39 method is similar to that of local mare basalts, and differs from the ages of Appenine Front samples recovered from the same region as 15426. Trapped argon is present in near-surface regions of the spherules, and can be resolved into at least two components requiring separate origins: a shallow (0.1 micron) component with Ar-40/Ar-39 not less than 30, and a deeper (2.0 micron) component with an Ar-40/Ar-39 ratio of 2.9. The ratio of trapped Ar-40 to Ar-36 is higher than in any lunar soil samples, and suggests that the trapped gas was implanted early in the spherules history.

Podosek, F. A.↗
NASA NTRS1973

Particle track record of Apollo 15 shocked crystalline rocks

Cosmic ray track densities in two mare basalts 15058 and 15555 are multivalued at each depth from the surface, and numerous indications of shock are present, suggesting that shock has lowered track densities in some crystals but not in others. From the minimum track densities, the maximum time since the last shock event is derived for each rock. In separate observations 15017, a black glass, has a surface age of about 14,000 years derived from impact pits, but because of low track retentivity a solar flare record of only 1 year.

Fleischer, R. L.↗
NASA NTRS1973

Irradiation history and accretionary processes in lunar and meteoritic breccias

Particle track studies reveal an abundant record of fossil solar flare tracks in breccia components. Metamorphic events govern the degree to which this record is preserved, and studies of phases with different track retentivities allow limits to be placed on temperatures reached during a rock's history. The least affected breccias have never experienced temperatures as great as 300 C. Two breccias which contain xenon from spontaneous fission of Pu-244 (14301 and 14318) and Xe-129 (14301 only) have never been heated above about 700 C. This and evidence for a surface irradiation of some of the breccia components support a surface implantation model for the origin of the xenon in these breccias. Green glass spheres in 15086 have not been heated above about 300 C during or after breccia formation yet have retained fission tracks for less than 0.7 G.y. Argon ages of about 3.5 G.y. for similar green glass are at least five times as great and may indicate that the glass was not completely outgassed at is formation.

Macdougall, D.↗
NASA NTRS1974

The resistance of selected high strength alloys to embrittlement by a hydrogen environment

Selected high strength iron base and cobalt base alloys with yield strengths in the range from 1233 to 2129 MN per sq m (179 to 309 KSI) were resistant to degradation of mechanical properties in a one atmosphere hydrogen environment at ambient temperature. These alloys were strengthened initially by cold working which produced strain induced epsilon prime-hcp martensite and fcc mechanical twins in an fcc matrix. Heat treatment of the cobalt base alloy after cold working produced carbide precipitates with retention of an hcp epsilon phase which increased the yield strength level to a maximum of 2129 MN per sq m (309 KSI). High-strength alloys can be produced which have some resistance to degradation of mechanical properties by a hydrogen environment under certain conditions.

Benson, R. B., Jr.↗
NASA NTRS1974

Dicarboxylic acids in the Murchison meteorite

A large suite of aliphatic dicarboxylic acids was found in extracts from the carbonaceous chondrite. This suite includes many of the branched and straight chained isomers with up to nine carbon atoms. The large number of compounds and the isomeric distribution suggest that the acids are the product of an abiotic synthesis. The dicarboxylic acids found have been identified by their gas chromatography retention values and by comparison of their mass spectra with those of authentic standards.

Lawless, J. G.↗
NASA NTRS1974

The resistance of selected high strength alloys to embrittlement by a hydrogen environment

Selected high strength iron base and cobalt base alloys were resistant to degradation of mechanical properties in a one atmosphere hydrogen environment at ambient temperature. These alloys were strengthened initially by cold working which produced strain induced martensite and fcc mechanical twins in an fcc matrix. Heat treatment of the cobalt base alloy after cold working produced carbide precipitates with retention of an hcp epsilon phase which increased the yield strength level. High strength alloys can be produced which have some resistance to degradation of mechanical properties by a hydrogen environment under certain conditions.

Benson, R. B., Jr.↗
NASA NTRS1974

Earth Observatory Satellite system definition study. Report 6: Space shuttle interfaces/utilization

An analysis was conducted to determine the compatibility of the Earth Observatory Satellite (EOS) with the space shuttle. The mechanical interfaces and provisions required for a launch or retrieval of the EOS by the space shuttle are summarized. The space shuttle flight support equipment required for the operation is defined. Diagrams of the space shuttle in various configurations are provised to show the mission capability with the EOS. The subjects considered are as follows: (1) structural and mechanical interfaces, (2) spacecraft retention and deployment, (3) spacecraft retrieval, (4) electrical interfaces, (5) payload shuttle operations, (6) shuttle mode cost analysis, (7) shuttle orbit trades, and (8) safety considerations.

Source record↗
NASA NTRS1975

Test evaluation of potential heatshield contamination of an outer planet probe's gas sampling system

The feasibility of retaining the heat shield for outer planet probes was investigated as a potential source of atmospheric sample contamination by outgassing. The onboard instruments which are affected by the concept are the pressure sensor, temperature sensor, IR detector, nephelometer, and gas sampling instruments. It was found that: (1) The retention of the charred heatshield and the baseline atmospheric sampling concepts are compatible with obtaining noncontaminated atmospheric samples. (2) Increasing the sampling tube length so that it extends beyond the viscous boundary layer eliminates contamination of the atmospheric sample. (3) The potential for contamination increases with angle of attack.

Kessler, W. C.↗