Search NASA⌕ Search

SEARCH · Search NASA

Results for “Advance Air Mobility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Vertiport Dynamic Density

Advanced Air Mobility (AAM) is envisioned to be another spoke in a region’s transportation system, supplementing ground-based travel with air-based travel. Eventually, air taxis will be pervasive, convenient, and affordable. As demand and operations tempo increase, congestion may arise. Several characteristics of AAM reduce the applicability of techniques used in today’s National Airspace System (NAS) to manage congestion. AAM will include both scheduled and non-scheduled, on-demand operations, challenging strategic deconfliction algorithms. Flights will be fairly short, traversing an urban area, not hundreds or thousands of miles, with corresponding low energy reserves, prohibiting excessive delays. Flight operators will need flexibility in operations, scheduling a flight only minutes before departure, or diverting to an alternate vertiport if it becomes advantageous, further adding to trajectory uncertainty that would challenge strategic deconfliction. Finally, operators will desire privacy to protect sensitive information or preserve competitive advantage, limiting early access to intent information. In this paper, we present an approach for managing congestion at vertiports by providing insight into the traffic situation to support operationally-advantageous and safe land or divert decisions. We propose a metric designed with usefulness and usability in AAM operations in mind. The metric uses the sociology concept of dynamic density (DD) that takes into consideration not only number of flights, but also the interaction of those flights with the vertiport’s limited resources, namely the landing pads and the parking spots. DD supports a Pilot in Command (PIC) with decisions about whether to proceed, expedite, delay, or divert; and supports air traffic control (ATC) and vertiport operators in airspace management and vertiport usage. We demonstrate the metric on a notional vertiport scenario. We also show that DD provides better insight into congestion and resulting flight delays than an aircraft count metric used in traditional air traffic management.

Lilly Spirkovska↗
NASA NTRSDate not supplied

Integration of Automated Systems (IAS) Flight Test Overview

The Integration of Automated Systems (IAS) Project is conducting a series of 2023 flight tests supporting NASA's Advanced Air Mobility (AAM) and National Campaign efforts. These flights include crewed, test (i.e., ownship) and traffic (i.e., intruder) aircraft that will fly with unique technologies onboard. The presentation will include overviews of the Hazard Perception and Avoidance (HPA) and Flight Path Management (FPM) technical areas but will focus primarily on HPA. HPA will test the FAA's Airborne Collision Avoidance System X (ACAS X), a next-generation collision avoidance tool developed to support different aircraft types and operations. The rotorcraft variant, ACAS Xr, is designed to accommodate existing helicopter platforms and in-development, vertical takeoff and landing (VTOL) concepts, which are critical to the emerging AAM concept of operations. Two configurations of ACAS Xr will be examined: Collision Avoidance System (CAS, similar to the Traffic Collision Avoidance System [TCAS] II) and Detect and Avoid (DAA, previously developed to provide added situational awareness for uncrewed aircraft). Additionally, this system will be explored during cruise and low-speed flight as well as flights within en-route, structured (i.e., dense/urban), and terminal airspaces. Scripted flight conflicts will be conducted, and these conflicts will be mitigated through maneuvers that are manual (i.e., performed by the pilots) or automated (i.e., achieved by the cooperation of the program middleware and onboard ownship systems). Objective data will be collected involving system and pilot performance as well as pilot decisions; subjective data will include pilot opinions of ACAS Xr's alerting and guidance as well as the automated maneuvers.

detect and avoid↗
NASA NTRSDate not supplied

Assessing Helicopter Pilots’ Detect and Avoid and Collision Avoidance Performance with ACAS Xr

The latest variant of the Federal Aviation Administration’s Airborne Collision Avoidance System (ACAS X) is being designed for both crewed and uncrewed rotorcraft. Referred to as ACAS Xr, the system joins a suite of other ACAS X variants poised to replace the Traffic Alert and Collision Avoidance System (TCAS II). ACAS Xr is tuned to support current-day helicopter platforms as well as electric Vertical Takeoff and Landing (eVTOL) vehicles that are still under development. Given this flexibility, ACAS Xr may be used by helicopter crews currently in operation or by remotely-operated eVTOL aircraft in the emerging Advanced Air Mobility (AAM) market. To cover the range of potential uses, two distinct configurations are being proposed for ACAS Xr: Collision Avoidance System (CAS) and Detect and Avoid (DAA). Under the CAS configuration, ACAS Xr provides minimal caution-level alerting but issues directive warning-level alerting and guidance. The DAA configuration, by contrast, provides caution-level alerting and guidance, in addition to the warning-level alerting and guidance. The current study was performed as part of the National Aeronautics and Space Administration’s AAM project. Six helicopter pilots were recruited to fly a variety of scripted traffic scenarios in a full-motion, crewed eVTOL simulator. Participants flew 60 encounters over two days, reacting to pre-recorded intruder aircraft that were scripted to fly into the participant’s aircraft from different approach angles, relative altitudes, and during different phases of flight. The pilots flew half of the encounters with the CAS configuration and half with the DAA configuration. Within each block of 30 encounters, pilots experienced 10 conflicts while in cruise, 10 in hover, and 10 while on approach to a heliport. Results showed that pilot response times were consistently under 5 seconds for RAs and under 10 seconds for DAA alerts, when present, during all three phases of flight. Unsurprisingly, the DAA configuration was associated with lower rates of en-route and high-severity losses of DAA well clear compared to the CAS configuration in all phases of flight except for the terminal area. Rates of losses of DAA well clear were found to be substantially higher in the Hover scenario, compared to Cruise. Pilots failed to fully comply with RAs at a rate of 0.10-0.18 in all conditions except for the DAA configuration in the Hover scenario, which was associated with a higher non-compliance rate of 0.4 due to Descend RAs issued at low altitudes. The implications of these results with regards to the ongoing development of ACAS Xr is discussed.

air taxis↗
NASA NTRS2023

National Campaign Development Test Executive Summary

NASA’s vision for Advanced Air Mobility (AAM) is to provide safe, sustainable, accessible, and affordable aviation for transformational local and intraregional missions and includes the transportation of passengers and cargo as well as aerial work missions, such as infrastructure inspection or search and rescue operations. NASA’s technical expertise, intergovernmental relationships, and high level of public trust will help this technology come to market concurrent with infrastructure readiness, public acceptance, and constructive regulation. By advising and integrating disparate AAM efforts across the country and working collaboratively with the FAA, the National Campaign (NC) objective is to motivate industry progress and support the development of policy, regulatory, and technical standards in a manner that best ensures public safety and benefit to the American people. NC began with the Dry Run and Developmental Test (NC-DT), which served as a pathfinder for collaboration and direct involvement with industry partners in integrated simulation exercises and flight tests. NC-DT culminated with an acoustics-gathering flight test in September 2021 with industry partner Joby’s prototype S4 2.0 air vehicle, which delivered the first foundational baseline of noise levels present in Electric Vertical Takeoff and Landing (eVTOL) vehicles. Through the DT phase, the NC team built and tested the airspace and range infrastructure while assessing the readiness level of industry partners leading up to future NC events. The purpose of this paper is to provide an overview of NC-DT.

National Campaign↗
NASA NTRSDate not supplied

Visual and Inertial Datasets for an eVTOL Aircraft Approach and Landing Scenario

A National Aeronautics and Space Administration (NASA) project developing computer vision algorithms for autonomous flight is producing real-world datasets with cameras mounted on aircraft. In related domains, such as autonomous driving, open datasets are key to innovation and advancement in computer vision and autonomous perception for future Advanced Air Mobility (AAM) operations. Few vision datasets, however, are publicly available in the aviation context. This paper introduces preliminary datasets containing several examples of approach and landing scenarios. The platform aircraft include a multirotor small unmanned aerial system (sUAS) and a crewed helicopter as surrogates for future electric vertical take-off and landing (eVTOL) aircraft. The dataset provides video imagery with associated inertial navigation system-global positioning system (INS-GPS) position and attitude estimates and other sensors. Surveyed locations of the visual features of the landing area are included. This dataset is the first to be released in an ongoing effort to collect and share large, diverse datasets relevant to autonomous aviation; community critique that can inform and improve future flight campaigns is welcome.

Nelson Brown↗
NASA NTRSDate not supplied

Reference Command Optimization for the Transition Flight Mode of a Lift plus Cruise Vehicle

Advanced air mobility mainly utilizes vehicles that are capable of vertical takeoff and landing (VTOL) for the simplicity of operation and large-scale deployment. However, VTOL vehicles need specialized trajectory and command design for the transition phase, where the vehicles transition between rotor-borne flight and wing-borne flight. Since VTOL vehicles are commonly designed as over-actuated systems for redundancy, one challenge that arises is actuator ambiguity, where it is unclear how to uniquely command actuators for the VTOL vehicle to track a given trajectory. We propose a method to design optimal reference commands for the transition mode. By formulating an 𝑙 1 -norm cost function on the rotor thrusts of the vehicle, we can achieve economical operation of the rotors such that they only operate when necessary and efficiently utilize the aerodynamics to save energy from reduced rotor actuation. We validate our approach in simulations and show its benefit compared to the commonly used differential flatness-based method.

John L Bullock↗
NASA NTRSDate not supplied

Progressive Development of Fleet Management Capabilities for a High Density Vertiplex Environment

The High Density Vertiplex (HDV) Sub-Project, as part of NASA’s Advanced Air Mobility (AAM) Project, has been developing a reference automation architecture with a far-term view of scalable, high-density operations in and around vertiport terminal areas. One of the components of that architecture under development has been focused on fleet management capabilities to support the management of multiple AAM operations from a supervisory role of a fleet manager. This capability relies on connectivity and information exchanges with other services for airspace and vertiport management as well as with flight crews responsible for operation execution. This paper will present this capability with a focus on its user interface developments as well as its integration into the simulation and flight testing performed as part of the HDV research roadmap.

AAM↗
NASA NTRSDate not supplied

MBSE Execution of Scalable Autonomous Operations for a High Density Vertiplex

The High Density Vertiplex (HDV) subproject of NASA’s Advanced Air Mobility (AAM) project adopted Model-Based Systems Engineering (MBSE) and NASA SE processes were executed via MBSE using MagicDraw. Since the adoption of MBSE and utilization of MagicDraw, the systems engineering team has made tremendous strides in each pillar of MBSE including, requirements, behavior, and structure. Scalable Autonomous Operations (SAO) was a stage in the development of the High Density Vertiplex focusing on the autonomous terminal operations of a vertiport with sUAS aircraft. MBSE served the systems engineering team to document and verify the physical architecture and capture a logical architecture of SAO for distribution to the AAM community. This paper will detail methodologies that were created to successfully execute NASA SE processes via MBSE in the SAO stage as well as highlight challenges and lessons learned.

Demetrios Katsaduros↗
NASA NTRSDate not supplied

Progressive Development of Fleet Management Capabilities for a High Density Vertiplex Environment

The High Density Vertiplex (HDV) Sub-Project, as part of NASA’s Advanced Air Mobility (AAM) Project, has been developing a reference automation architecture with a far-term view of scalable, high-density operations in and around vertiport terminal areas. One of the components of that architecture under development has been focused on fleet management capabilities to support the management of multiple AAM operations from a supervisory role of a fleet manager. This capability relies on connectivity and information exchanges with other services for airspace and vertiport management as well as with flight crews responsible for operation execution. This paper will present this capability with a focus on its user interface developments as well as its integration into the simulation and flight testing performed as part of the HDV research roadmap.

high density vertiport↗
NASA NTRSDate not supplied

Integration of Automated Systems (IAS) Flight Test - Hazard Perception & Avoidance (HPA) Results

The Integration of Automated Systems (IAS) flight test series concluded in October 2023 in support of NASA's Advanced Air Mobility (AAM) project. These flights include crewed, test (i.e., ownship) and traffic (i.e., intruder) aircraft that flew with unique technologies onboard. The presentation includes overviews of the flight tet itself and the specific results that pertain to the Hazard Perception and Avoidance (HPA) technical areas. HPA tested the FAA's Airborne Collision Avoidance System X (ACAS X), a next-generation collision avoidance tool developed to support different aircraft types and operations. The rotorcraft variant, ACAS Xr, is designed to accommodate existing helicopter platforms and in-development, vertical takeoff and landing (VTOL) concepts, which are critical to the emerging AAM concept of operations. Two configurations of ACAS Xr were examined: Collision Avoidance System (CAS, similar to the Traffic Collision Avoidance System [TCAS] II) and Detect and Avoid (DAA, previously developed to provide added situational awareness for remote pilots). Additionally, this system was flown in cruise and low-speed flight regimes as well as within en-route and (emulated), structured (i.e., dense/urban), and terminal airspaces. Results include the types of alerts generated by ACAS Xr across the different configurations, the distances at which the alerts were generated, response times, manuever sizes, miss distances, and general comments from pilots. Key takeaways and next steps are also provided.

detect and avoid↗
NASA NTRSDate not supplied

High Power Laser Ablation

Presenting a potential business case for the use the power beaming to augment electric Advanced Air Mobility vehicles. Also, presenting options for NASA funding within this topic area.

HPLA↗
NASA NTRSDate not supplied

Acoustic Characterization of the NASA Langley 14- by 22-Foot Subsonic Tunnel Using Single-Microphone Analysis Techniques

An experimental campaign was conducted to assess recent acoustic modifications to the NASA Langley Research Center 14- by 22-Foot Subsonic Tunnel. This effort was undertaken in preparation for future rotorcraft, Advanced Air Mobility, and airframe noise acoustic tests. The tunnel is a closed circuit and typically operates in an open-jet configuration for acoustic studies. A vertical linear array of microphones and a phased array were placed on traverses outside of the core flow. Pole-mounted acoustic sources with known waveforms were used to identify reflective surfaces under static conditions with no tunnel flow. A similar process was replicated with more compact sources in an aerodynamic fairing for flow speeds up to Mach 0.16. This enabled investigation of the test section core flow and bounding shear layer impacts on the acoustic measurements. Periodic averaging was employed and was shown to be capable of isolating periodic acoustic signals even for poor signal-to-noise ratio conditions. Benefits and limitations of single-microphone processing methods are identified. A companion paper utilizes a phased array in an effort to address the identified limitations to more traditional single-microphone data collection.

Acoustic Characterization↗
NASA NTRSDate not supplied

Enhancements, Verification, and VMS Integration of VTOL Concept Vehicle Simulation Models

Advanced Rotorcraft Technology (ART) and the NASA Ames Aeromechanics branch have jointly developed FLIGHTLAB simulation models for Advanced Air Mobility (AAM) VTOL concept vehicles. The overarching purpose of the simulation model development is to establish a set of well defined reference vehicles for FLIGHTLAB users and the rotorcraft community. The ongoing research effort and enhancement of these AAM simulation models to fulfill the role of quality reference vehicles is this paper’s focus. The content of this paper expands on the established characteristics of these AAM models in three primary areas. First, enhancement of the lift+cruise and tiltwing models with elastic airframe properties is discussed. The process of setting up the elastic airframe model in FLIGHTLAB, as well as the impacts on flight characteristics are explained. The introduction of the elastic airframe modeling allows these models to be used in flight dynamics, loads, and vibration analysis of the configuration designs. Next, linear model generation from the enhanced simulation model is covered. Confirming the validity of the linearized models is of importance, as these linear models are utilized for flight control design and tuning for these experimental configurations. For the final focus, the progress towards implementation of these models into the NASA Ames Vertical Motion Simulator (VMS) is described. This task seeks to demonstrate the procedures of integrating a FLIGHTLAB flight simulation in the VMS environment, test fully integrated simulation with communication between flight dynamics, control, and propulsion models, and explore the essential aspects of simulation model integration in a full flight simulator environment. This includes I/O definition, initialization, trim, flying, etc. By expanding the capabilities of the AAM simulation models, they continue to develop as valuable and approachable modeling references.

VMS↗
NASA NTRSDate not supplied

Acoustic Characterization of the NASA Langley 14- by 22-Foot Subsonic Tunnel Using Single-Microphone Analysis Techniques

An experimental campaign was conducted to assess recent acoustic modifications to the NASA Langley Research Center 14- by 22-Foot Subsonic Tunnel. This effort was undertaken in preparation for future rotorcraft, Advanced Air Mobility, and airframe noise acoustic tests. The tunnel is a closed circuit and typically operates in an open-jet configuration for acoustic studies. A vertical linear array of microphones and a phased array were placed on traverses outside of the core flow. Pole-mounted acoustic sources with known waveforms were used to identify reflective surfaces under static conditions with no tunnel flow. A similar process was replicated with more compact sources in an aerodynamic fairing for flow speeds up to Mach 0.16. This enabled investigation of the test section core flow and bounding shear layer impacts on the acoustic measurements. Periodic averaging was employed and was shown to be capable of isolating periodic acoustic signals even for poor signal-to-noise ratio conditions. Benefits and limitations of single-microphone processing methods are identified. A companion paper utilizes a phased array in an effort to address the identified limitations to more traditional single-microphone data collection.

Acoustic Characterization↗
NASA NTRSDate not supplied

Ice Shape Analysis of an eVTOL Propeller in Forward Flight at the NASA Glenn Icing Research Tunnel

Advanced Air Mobility (AAM) introduces many novel electric vertical takeoff and landing (eVTOL) aircraft configurations for which the effect of icing is not well understood. While icing computational tools have often aided in the design and certification of conventional aircraft, experimental data is needed to support the development and validation of such tools for eVTOL applications. To investigate the icing phenomenon relevant to eVTOL aircraft, NASA Glenn Research Center developed a general-purpose propeller test stand for conducting fundamental icing research on electrically driven propellers in the Icing Research Tunnel (IRT). A 10-day test entry in the IRT was completed in March, 2023, with the goal of generating ice accretions on a non-proprietary propeller geometry under well-characterized conditions. Three carbon fiber propellers of diameters 0.610, 0.711, and 0.914 m (24, 28, and 36 in) were used during the test. Various parametric sweeps of cloud and operating conditions were performed to evaluate the sensitivity of the parameters on the resulting ice accretion characteristics such as ice thickness, mass, location (impingement limits), and type (glaze vs rime). Ice shapes were reviewed for their repeatability, correctness of trends, and sensitivity to parameter variations. The data from the test is being used to support the development of the ice accretion solver, GlennICE.

Icing↗
NASA NTRSDate not supplied

Development of Candidate Airspace Procedures for Urban Air Mobility in the Dallas Area

As the concept of on-demand electric air taxis gains popularity and begins to take shape, many research efforts are underway to address the challenges of integrating this new class of passenger-carrying air vehicles into the already congested U.S. National Airspace System. Through collaborations between the National Aeronautics and Space Administration (NASA), the Federal Aviation Administration, and industry, this concept, commonly referred to as Urban Air Mobility (UAM), envisions a safe, reliable, and efficient mode of transportation traversing metropolitan and urban areas. Among the many challenges being tackled, airspace procedures and information requirements are critical areas of research that need to be addressed. In a joint effort between NASA and Joby Aviation, a human-in-the-loop study was conducted at the NASA Ames Research Center to evaluate initial and midterm operations with air traffic controllers and on-board UAM pilots in the Dallas area. This area was chosen due to its complex Class Bravo Airspace that extends to the surface over a relatively large area. To achieve the goals and objectives of the study, multiple preceding efforts were conducted to develop the candidate procedures and information requirements. This paper provides an overview of the operational concept used for the study, the process that was followed, and the findings from the two tabletop meetings and a shakedown activity. The combination of these led to a set of airspace procedures, letters of agreement, and information requirements that were evaluated in the human-inthe-loop study.

Urban Air Mobility↗
NASA NTRSDate not supplied

NASA Icing Research Update 2024

This presentation summarizes NASA’s current icing research portfolio for an invited talk on August 1, 2024, at the AIAA Aviation Forum and Exposition. The presentation overviews NASA facilities, computational tools, and latest research. This research is categorized as application focused research, atmospheric characterization, and fundamental research / capability improvement. The application focused research includes (1) the Transonic Truss Brace Wing, (2) High Lift Common Research Model, (3) Advanced Air Mobility, and (4) Efficient Quiet Integrated Propulsor. The atmospheric characterization work includes High Ice Water Content Flight Research, while the fundamental research / capability improvement area includes (1) the Simulated Inter-compressor Duct Research Model, (2) Characterization of Low Ice Adhesion Materials, (3) Collection Efficiency Measurements, (4) Impedance Based Ice/ Water Sensor, (5) Tomography for Cloud Uniformity in the Icing Research Tunnel, and (6) Supercooled Large Drop Research. Finally, the presentation summarizes collaboration and partnership opportunities with NASA.

Icing↗