Search NASA⌕ Search

SEARCH · Search NASA

Results for “LOGARITHM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Magnetic properties and granulometry of metallic iron in lunar breccia 14313

Based on a detailed study of time-dependent or viscous remanence (VRM), thermoremanence (TRM) and magnetic granulometry of soil breccia 14313, single-domain particles of iron 100 to 200 A in size are proposed as the major carriers of natural remanence (NRM) in this rock. The VRM of 14313 is unusually intense and exhibits a logarithmic time decrease of VRM which ceases fairly abruptly after a time about equal to the original exposure to the field. The partial TRM spectrum reveals both a high-blocking-temperature fraction, scarcely affected by AF demagnetization to 1000 Oe, and an unusual concentration of blocking temperatures just above room temperature. The former fraction would contribute a very hard and stable component to any NRM of lunar origin, but the latter fraction, which accounts for the pronounced VRM of 14313 and undoubtedly has imparted a large viscous NRM component in the earth's field, is also surprisingly hard. A substantial portion (20 to 40%) is not demagnetized by an 800-Oe field.

Dunlop, D. J.↗

Photoluminescence of Zn-implanted GaN

The photoluminescence spectrum of Zn-implanted GaN peaks at 2.87 eV at room temperature. The emission efficiency decreases linearly with the logarithm of the Zn concentration in the range from 1 x 10 to the 18th to 20 x 10 to the 18th Zn/cu cm.

Pankove, J. I.↗

The vapor pressure of iron pentacarbonyl

Vapor pressure measurements have been made on pure iron pentacarbonyl between +31 and -19 C. The experimental results may be expressed by the logarithm of pressure (mm Hg) to the base 10 equals -(2096.7 K/T) + 8.4959, which corresponds to a heat of vaporization for the liquid carbonyl of delta H ? (9.588 plus or minus 0.12) kcal/mole. This result confirms and extends the earlier measurements made by Trautz and Badstuebner between 0 and 140 C. The need for careful purification of commercially available iron pentacarbonyl is emphasized, particularly for establishing the correct vapor pressure below 45 C.

Gilbert, A. G.↗

Skeletal status and soft tissue composition in astronauts. Tissue and fluid changes by radionuclide absorptiometry in vivo

A device has been constructed and tested which provides immediate readout of bone mineral content and bone width from absorptiometric scans with low energy radionuclides. The basis of this analog system is a logarithmic converter-integrator coupled with a precision linear ratemeter. The system provided accurate and reliable results on standards and ashed bone sections. Clinical measurements were made on about 100 patients with the direct readout system, and these were highly correlated with the results from digital scan data on the same patients. The direct readout system has been used successfully in field studies and surveys as well as for clinical observations.

Cameron, J. R.↗

Crack growth in ASME SA-105 grade 2 steel in hydrogen at ambient temperature

Cyclic-load crack growth measurements were performed on ASME SA-105 Grade 2 steel specimens exposed to 10,000- and 15,000-psi hydrogen and to 5000-psi helium, all at ambient temperatures. The cyclic-load crack growth rate was found to be faster in high-pressure hydrogen than in helium. Cyclic-load crack growth rates in this steel were not reduced by preloading in air to a stress intensity of 1.5 times the cyclic K sub max in hydrogen. There are indications that holding under load in hydrogen, and loading and unloading in helium retards hydrogen-accelerated cyclic-load crack growth. Cyclic frequency and R (ratio of K sub min/k sub max) were important variables determining crack growth rate. The crack growth rate increased as a logarithm of the cycle duration and decreased with increasing R.

Walter, R. J.↗

Algorithms

The implementation of the algorithms used in the flight program to approximate elementary functions and mathematical procedures was checked. This was done by verifying that at least one, and in most cases, more than one function computed through the use of the algorithms was calculated properly. The following algorithms were checked: sine-cosine, arctangent, natural logarithm, square root, inverse square root, as well as the vector dot and cross products.

Source record↗

An empirical line-blanketing study of Am stars

Metallic line-blanketing coefficients have been measured over the wavelength range from 3800 to 4700 A in a sample of 20 Am and normal A stars. An expression for the logarithmic iron abundance has been calibrated in terms of effective temperature and a mean line-blocking coefficient. This makes it possible to determine the atmospheric iron abundance in sharp-lined Am and A stars with an accuracy of better than plus or minus 0.1 dex, using only line-blocking measurements and a photometric effective temperature.

Rydgren, A. E.↗

Dissipative heating effects and end corrections for viscous Newtonian flow in high shear capillary tube viscometry

The effect of dissipation heating on the apparent viscosity measured in capillary tube viscometry is described in this paper. Conditions of low Reynolds number and high shear are assumed. End corrections to the tube flow are incorporated. The flow curves show decreasing apparent viscosity when the shear stress increases. The configuration of the flow curves plotted in logarithmic presentation are found to be identical for fluids with Newtonian behavior. Convection is the predominant mechanism in removal of the heat in short capillary tube. The estimated upper bound for the shear stress obtainable in short length capillary tubes appears to be of the order of magnitude of 10 MPa limited primarily by the pressure drop associated with the constant end correction from the flat ended inlet and exit of the tube.

Jakobsen, J.↗

Wide range multi-channel analog switch

A ten-channel analog switch has been developed as a sample and shape circuit for signals used as inputs to a logarithmic pulse height recording system. The circuit employs a field effect transistor as the switching element. Switching transients are reduced to approximately 2 mV by adding to the gated signal an inverted transient generated by an identical circuit with no signal applied. The circuit is linear to 2% from 3 mV to 10 V.

Levit, L. B.↗

Effect of crosslinking density on biaxial relaxation of SBR by using reduced variables

The use of reduced variables to account for the effect of crosslinking density in a styrene-butadiene rubber (SBR) system is demonstrated for general biaxial stress states. Recently published results from stress relaxation tests on five SBR vulcanizates crosslinked to different degrees by tetramethylthiuram disulfide were superposed by using the crosslinking density as a reduction variable. The equilibrium shear modulus calculated from the master relaxation curve at long reduced times was in satisfactory agreement with other results for SBR. The time-axis shifts were related in a linear logarithmic manner to the crosslinking density but had a slope slightly less than values previously reported for elastomer systems.

Arenz, R. J.↗

Thresholds for the perception of angular acceleration as indicated by the oculogyral illusion

A motorized chair (with precise servo controls) accelerated the observer in a clockwise (CW) or counterclockwise (CCW) direction at rates that ranged in logarithmic progression from 0.02 to 6.00 deg/sq sec. The target, a narrow collimated line of light, was contained within a goggle device worn by the observer and therefore fixed in relative position to him. The illusion, appearing as rightward or leftward movement of the visual target in the direction of acceleration, was determined by a double staircase procedure among 300 normal and 4 labyrinthine-defective observers. None of the latter perceived the illusion. The majority of normal observers revealed no substantial directional difference (CW vs. CCW threshold). Threshold frequency distributions ranged in rate (deg/sq sec) from 0.020 to 0.950; the threshold of response in more than half the normal observers was less than 0.10, in over three-fourths was less than 0.20, in over 90% less than 0.30, and 100% less than 1.00.

Miller, E. F., II↗

Relation of solar wind fluctuations to differential flow between protons and alphas

An analysis is made of the difference between the alpha particle and proton flow velocities in the solar wind as observed by the OGO 5 satellite. The alpha and proton velocities from each of 962 spectral scans are compared with the variance of 32 solar wind flux measurements made during the scans. The average velocity difference is plotted for each of 10 logarithmic variance intervals and is seen to decrease and approach zero when the variance is high. It is shown that such an anticorrelation may be due to the fact the wave/particle interactions provide the drag force between two streams of different velocity in a collisionless plasma.

Neugebauer, M.↗

Variation in the number of meteoroid impacts on the moon with lunar phase

Data obtained with the Apollo 12 and 14 long-period seismometers in the period between December 1969 and January 1973 are used to determine the direction of approach and mass-distribution statistics of meteoroids in near-earth space. The total number of detected meteoroid impacts in this period is analyzed as a function of lunar phase with allowance for seismometer sensitivity and characteristics of lunar seismic-wave propagation. A logarithmic relation is derived which describes the mass-distribution statistics. It is concluded that most orbits for meteoroids with a mass in excess of 5 kg lie near the plane of the ecliptic with aphelia between 2 and 5 AU.

Dainty, A. M.↗

Shock tube measurements of specific reaction rates in the branched chain CH4-CO-O2 system

Growth constants, obtained by measuring the blue CO flame band emission behind incident shock waves, were obtained for two elementary bimolecular reactions involved in the oxidation of methane. Gas mixtures containing small amounts of CH4 with varying amounts of CO, O2, and in one case CO2, diluted with argon, were investigated, and exponential growth constants were derived from plots of the logarithm of observed light intensity versus gas time. The rate constant for the reaction O + CH4 yields CH3 + OH was found to be 1.9 times 10 to the 14th exp(-5900/T) cu cm per mole per sec in the range 1300-2000 K; for the reaction CH3 + O2 yields CH3O + O, the rate constant was determined to be 2.4 times 10 to the 13th exp(-14,500/T) cu cm per mole per sec in the range 1200 to 1900 K.

Brabbs, T. A.↗

Vacuum-ultraviolet reflectometer

Baffle, three-blade chopper, and split spherical mirror transmit alternating dual beam into integrating sphere. Alternating reference and sample beams are detected by high gain photomultiplier and modified logarithmic ratiometer. Device is useful in fusion research, high power laser work, and spectrometer or monochromator construction.

Allen, T. H.↗

Rough-to-smooth transition of an equilibrium neutral constant stress layer

Purpose of research on rough-to-smooth transition of an equilibrium neutral constant stress layer is to develop a model for low-level atmospheric flow over terrains of abruptly changing roughness, such as those occurring near the windward end of a landing strip, and to use the model to derive functions which define the extent of the region affected by the roughness change and allow adequate prediction of wind and shear stress profiles at all points within the region. A model consisting of two bounding logarithmic layers and an intermediate velocity defect layer is assumed, and dimensionless velocity and stress distribution functions which meet all boundary and matching conditions are hypothesized. The functions are used in an asymptotic form of the equation of motion to derive a relation which governs the growth of the internal boundary layer. The growth relation is used to predict variation of surface shear stress.

Logan, E., Jr.↗

Simulator studies and psychophysical ride comfort models

An elementary psychophysical model to predict ride comfort was developed using flight and simulator data where subjects were exposed to six degrees of freedom. The model presumes that the comfort response is proportional to the logarithm of the stimulus above some threshold stimulus. In order to verify this concept of comfort modeling, it was necessary to obtain ride comfort data for single degree of freedom random motions and for combinations of random motions. Accordingly, a simulator program was performed at the NASA Langley Research Center to measure subjective comfort response ratings using one degree of freedom, two degrees of freedom, three degrees of freedom, and six degrees of freedom. An analysis of the single degree of freedom and two degrees of freedom data is presented. Preliminary models of ride comfort response for single degree of freedom random motions and for certain combinations of two degrees of freedom random motions were developed.

Stone, R. W., Jr.↗