Search NASA⌕ Search

SEARCH · Search NASA

Results for “Prevalence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Uptake and elimination of 137Cs in aquatic biota inhabiting a contaminated effluent canal

Radiocesium (137Cs) is among the most prevalent and concerning radionuclide released from anthropogenic activities due to its relatively slow decay time and high bioavailability. Numerous studies have reported activity concentrations of 137Cs in exposed biota, but few have assessed detailed toxicokinetics. The objective of our study was to quantify and compare the uptake and elimination of 137Cs in aquatic taxa from multiple classes with different ecological roles inhabiting a canal contaminated from nuclear production activities on the Savannah River Site in South Carolina, USA. We tracked accumulation and elimination of 137Cs in four understudied aquatic species: one aquatic macrophyte [American white water lily (Nymphae odorata), two benthic associated omnivorous species (American bullfrog (Lithobates catesbeianus) and red swamp crayfish (Procambarus clarkii), and one pelagic carnivorous fish (Eastern mosquitofish (Gambusia holbrooki)]. We monitored accumulation of 137Cs from initial exposure until equilibrium for biota restricted within the canal and subsequently tracked elimination of 137Cs over time by moving organisms from the canal to a nearby reference pond. Results indicated bullfrog tadpoles reached 95 % equilibrium in approximately 9 days, the fastest among the species evaluated. After bullfrog tadpoles, the next fastest time to equilibrium was achieved by red swamp crayfish (51 days) followed by mosquitofish (86 days). At equilibrium, bullfrog tadpoles were found to have similar 137Cs activity concentrations to mosquitofish (3.16 and 3.57 Bq/g, respectively), and both were significantly higher than red swamp crayfish (1.77 Bq/g). For elimination, we found biological half-lives to range between 8 and 43 days with bullfrog tadpoles eliminating 137Cs the fastest followed by water lilies, mosquitofish, and red swamp crayfish. Overall, we found the uptake and elimination of 137Cs to vary widely among our studied species, but benthic organisms are not at an increased risk to accumulate 137Cs compared to organisms in less frequent contact with the sediment.

Benthic organism Bioaccumulation Bioindicator Elim↗
DOE OSTI2022

Engineering grain boundary anisotropy to elucidate grain growth behavior in alumina

Current grain growth models have evolved to account for the relationship between grain boundary energy/mobility anisotropy and the five degrees of grain boundary character. However, the role of grain boundary networks on overall growth kinetics remains poorly understood. To experimentally investigate this problem, a highly textured Al 2 O 3 was fabricated by colloidal casting in a strong magnetic field to engineer a unique spatial distribution of grain boundary character. Microstructural evolution was quantified and compared to an untextured sample. From this comparison, a prevalence of (0001)/(0001) terminated grain boundaries with anisotropic networks were identified in the textured sample. These boundaries and their networks were found to be driving grain growth at a faster rate than predicted by models. These findings will allow better modelling of grain growth in real systems by experimentally exploring the impact thereon of grain boundary plane anisotropy and relative energy/mobility differences between neighboring boundaries.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Lipid and lipoprotein metabolism in microglia: Alzheimer’s disease mechanisms and interventions

Alzheimer's disease (AD) presents a significant challenge owing to its widespread prevalence and complex neuropathogenesis, affecting millions worldwide. Current therapeutic strategies that predominantly target amyloid-beta accumulation are insufficient, particularly for ApoE4 carriers. Alterations in lipid composition are well documented in AD, characterized by reductions in phospholipids and sulfatides, along with increases in cholesterol, cholesteryl esters, and triglycerides (TGs). Microglia, the brain's resident immune cells, link dysfunctional lipid processing to AD neuropathogenesis. For example, genetic studies have pointed to microglial lipid and lipoprotein processing gene variants as some of the strongest risk factors for AD. In addition, microglial dysfunction, characterized by lipid droplet accumulation, increased cholesterol and TG levels, and altered lipid transport, may exacerbate the pathological hallmarks of AD, such as amyloid-beta and tau accumulation. Conversely, emerging studies have shown that strategies aimed at inhibiting lipid droplet accumulation in microglia, reducing TG synthesis, and promoting the activity of lipoprotein receptors expressed by microglia can improve cell functions and markers of AD pathology. This review dissects the interplay between microglial lipid metabolism and AD, highlighting the significance of lipid transport and trafficking within the CNS. Given the intrinsic link between microglial metabolism and AD progression, emerging and potential therapeutic strategies aimed at restoring lipid handling and improving microglial function are explored. This review provides a comprehensive examination of the emerging literature, detailing the current state of knowledge on microglial lipid metabolism, its genetic underpinnings, and the potential for novel interventions targeting these mechanisms to ameliorate AD pathology.

Alzheimer's disease↗
DOE OSTI2023

Influence of oxygen on performance of multi-principal element alloy as braze filler for Ni-base alloys

In manufacturing of multi-principal element alloys (MPEAs), the casting process is often a primary point of oxygen introduction to the material system, which was demonstrated by the laboratory scale button arc-melting process. Oxygen introduction raises concerns for the mechanical performance of these alloys if employed as structural materials alone or in engineering applications, such as serving as filler materials to enable joining of similar or dissimilar alloy pairs that are conventionally considered difficult to join. In this work, oxide inclusions in an as-cast off-equiatomic MnFeCoNiCu MPEA and Ni-base alloy braze joints made with this MPEA were evaluated by synchrotron x-ray diffraction mapping and electron microscopy. MnO was found to be prevalent throughout the cast MPEA and was chemically reduced during brazing by trace Al from the base material, Ni-base Alloy 600. Incomplete reaction of the MnO with Al, and some alternative reaction with Cr, left a mixture of MnO, Al 2 O 3 , and Cr 2 O 3 in the as-brazed joint, with the oxides concentrated near the braze centerline due to directional solidification. Further, in the braze joints, the non-oxide constituent phases detected were an FCC matrix and particles of Cr 23 C 6 , Cr 7 C 3 , and TiN which are all native to Alloy 600. The evolution of oxides within the brazed joints at elevated service temperatures of 600-800°C was also evaluated. While MnO and Al 2 O 3 were stable during high-temperature service, Cr 2 O 3 particles grew to several hundred microns, with dissolved oxygen in the MPEA providing a significant source for oxide growth. Comparing tensile performance of the as-brazed condition with post-service conditions showed that the evolution of oxide particles contributed to an increase in strength and decrease in ductility of the brazed joints. Evaluating particle morphologies among fracture surfaces of individual specimens demonstrated that large Cr 2 O 3 particles and continuous cluster networks of Al 2 O 3 were the features most detrimental to total elongation. Hence, unmitigated evolution of oxygen-containing species during brazing and service conditions is detrimental to the ductility of the brazed joints, which highlights the importance of oxygen control in initial manufacturing of MPEAs for engineering applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Effect of threshold parameters on infrared segmentation methods for porosity detection in electron beam powder bed fusion

In-situ process monitoring has seen significant interest in additive manufacturing to address qualification and certification goals. This is especially prevalent in metal powder bed fusion processes such as electron beam powder bed fusion (PBF-EB), with layer-wise infrared imaging being commonly used to detect defects. Here, this work compares two different segmentation methods (static thresholding and statistical thresholding) used for detecting porosity from in-situ infrared imaging data for PBF-EB. Samples were manufactured at a variety of focus offset values to induce porosity. Then, the segmented infrared images were compared to ex-situ X-ray computed tomography scans, which served as a ground-truth reference for objective evaluation. Through this analysis framework, the influential parameters, static threshold and N-value (number of standard deviations above the mean pixel value), respectively, for both image segmentation methods were analyzed and compared for their effects on porosity detection. With optimal parameter settings, the two methods had similar porosity detection performance, but the statistical method performed better under a larger variety of parameter settings.

Infrared imaging↗
DOE OSTI2022

Quantitative Morphological Characterization of Carbide Inclusions in Uranium Metal

Uranium carbides (UCs) are prevalent inclusions in U metal that form during melting operations from interactions with crucible walls and the casting chamber atmosphere. Although UCs have been studied extensively since the beginning of U metal foundry operations, there are still unknowns regarding the effects of thermomechanical processing on their sizes and morphology. Here, we present the results of a series of controlled cooling experiments with molten uranium to elucidate the effect of cooling rate on inclusion morphology in a-U. Samples were melted using a vacuum induction melter and manually cooled at rates of 2.5, 1.7, 1.1, 0.8, 0.3 (± 1%) K/s from ~1600 K to <700 K in under 1 hour. Subsequent scanning electron microscopy (SEM) was performed on cross-sections of the samples, revealing a complex mixture of UC morphologies that are indicative of diffusion and growth influenced by the thermal processing of the U matrix. Image analysis using the Morphological Analysis of Materials (MAMA) software showed that UC sizes generally grew larger with slower cooling rates, and the two slowest cooling rates noticeably impacted the inclusion circularity and ellipse aspect ratio. These results indicate that UC morphology is sensitive to short cooling rates (<1 hour) and could therefore be controlled in the production of metallic nuclear fuels. Additionally, inclusion speciation and morphologies could potentially provide forensic clues about processing history of unknown metal samples. Understanding the driving forces involved in UC morphology evolution is beneficial for evaluating metal fuels for next generation nuclear reactors and for identifying signatures for nuclear forensics.

Athon, Matthew T.↗
DOE OSTI2022

Understanding radiation effects in friction stir welded MA956 using ion irradiation and a rate theory model

We report an outstanding challenge in the manufacturing and joining of oxide dispersion strengthened steels is retaining the nanofeatures in the alloy throughout the fabrication and welding process. MA956 was friction stir welded with two different sets of welding parameters, resulting in a medium and high heat input. After welding, 5 MeV Fe ++ ion irradiations were performed at doses ranging from 50 to 200 dpa in the temperature range of 400 to 500°C. Post-irradiation characterization was performed with scanning transmission electron microscopy and energy-dispersive x-ray spectroscopy to investigate the Y-Al-O dispersoids, voids, and dislocations. After welding, the dispersoid microstructure coarsened, resulting in fewer and larger dispersoids regardless of heat input. After irradiation, the dispersoid behavior in the welded material was sensitive to temperature, exhibiting growth behavior attributed to Ostwald coarsening at 500 °C but a mixture of nucleation and more muted growth at 400 and 450 °C, attributed to competing mechanisms of radiation-enhanced diffusion and Ostwald coarsening. Void swelling correlated to heat input; being more prevalent in the welded conditions occurring at lower doses and in higher values relative to the base material. The low values of swelling despite microstructure coarsening caused by welding demonstrate the excellent swelling resistance of MA956, even after welding with the highest swelling values of 0.5% noted in the stir zone high heat input condition at 450 °C, 200 dpa. The dislocation behavior was inconsistent: the strongest trend was that network density was higher for welded versus base material, and an increase in loop diameter with temperature was observed. A rate theory model based on the observed microstructure suggests at high temperature interstitial loss to sinks was more likely to be dominant compared to mutual annihilation via point defect recombination, because of an increase of the radiation diffusion coefficient with temperature regardless of initial welded microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The role of UC inclusions in the development of fission gas bubble superlattice neutron-irradiated monolithic U-10Mo fuels

Uranium Carbide (UC) inclusions are the most prevalent impurities in Uranium-Molybdenum (U-Mo) fuel and are considered undesirable because they could potentially affect fuel performance. This work revealed that, like grain boundaries (gBs), UC inclusions could help facilitate the formation of the fission gas bubble superlattice (GBS). The GBS is a highly organized complex defect structure that can effectively store fission gases, thereby inhibiting fuel swelling. Transmission electron microscopy (TEM) showed that GBS self-organization can initiate at the UC/U-Mo interfaces in U-10Mo fuel irradiated to low fission density. Furthermore, this study also revealed that the UC boundary in U-10Mo irradiated to low fission density is wavy and periodic in morphology and that GBS formation is semi-coherent with the UC boundary. Because the initiation of GBS occurs at gBs and UC/U-Mo interfaces, the fission gas inventory is always highest at those regions compared to the U-Mo grain interior. Consequently, at higher fission densities, it is likely that high burnup structure (HBS) development via grain refinement will begin at gBs and UC/U-Mo interfaces.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Effect of chromium on corrosion resistance of Ni-Cr-Mo-Gd alloys in seawater

Neutron absorbing materials are being considered within commercial spent nuclear fuel disposal canisters to maintain nuclear subcriticality in storage. To select candidate alloys for the canisters, both neutron absorption and corrosion resistance should be considered. This work examines corrosion resistance of Ni-Cr-Mo-Gd alloys developed specifically for neutron absorption. The addition of Gd results in a secondary gadolinide phase (Ni 5 Gd) that significantly changes the corrosion properties. Testing was performed primarily in seawater at 30°C. Seawater was selected as the most prevalent terrestrial brine and is characterized by a high chloride concentration. Various electrochemical corrosion techniques were carried out to evaluate Ni-Cr-Mo-Gd alloys with different Cr compositions and investigate the role of Ni 5 Gd phase on corrosion behavior. C22 was included as a benchmark material, due to the similarity in composition and the significant corrosion data available. Here, test results showed a tendency to passivate over time which is attributed to dissolution of surface exposed Ni 5 Gd phase. Cross-sectional analysis indicated that dissolution could penetrate hundreds of micrometers deep under aggressive conditions. It was found that higher Cr variant (21.01%) showed much shallower impact, suggesting Cr prevented primary phase corrosion and thus reduced Ni 5 Gd phase dissolution. Acid pickling of the specimens showed much less dissolution for a higher Cr material and suggested some primary phase dissolution for the low Cr specimen. Acid pickled specimens showed positive shifts in the repassivation potential, suggesting increased surface passivation.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

A systematic exploration of the hydrolysis products of the uranium trioxide polymorphs and their optical vibrational spectra

Study of the uranium trioxide (UO 3 )-water system is complex with inconclusive results and limited details in the literature. The UO 3 system is home to at least seven structural polymorphs and an amorphous phase. The proposed hydrolysis products of UO 3 are just as numerous, yet investigations of these alteration products are sporadic and generally antiquated, thus requiring systematic investigations. Recent developments in the understanding of UO 3 phase space, aided by improvements in analytical and computational techniques, necessitate more modern investigations into the uranyl hydroxide family and their naturally occurring mineral counterparts. We present findings from a systematic investigation of the products formed via hydrothermal reactions of common UO 3 polymorphs and discuss how the equatorial coordination of the uranyl/uranyl-like ions within the UO 3 precursors leads to differences in the optical vibrational spectra of the resulting hydrolysis products. The hypo-stochiometric nature of α-UO 2 (OH) 2 allows for the formation of multiple unique uranyl sites and a distortion of the unit cell to a lower symmetry. This study provides, for the first time, an analysis of β-UO 2 (OH) 2 using modern techniques and instrumentation (Raman/infrared spectroscopy and powder x-ray diffraction) and lays a foundation for future time-dependent investigations into the structural dependence of the hydrolysis kinetics of the UO 3 phases. In conclusion, given the prevalence of UO 3 at both ends of the nuclear fuel cycle, an understanding of its behavior with water has applications ranging from nuclear forensics to waste management and environmental transport.

Uranium trioxide↗
DOE OSTI2026

Sintering effects on NpO 2 grain size and morphology: The role of precursor Np phase

Neptunium dioxide (NpO 2 ) is a key phase in nuclear material processing as a target material for the production of plutonium-238 ( 238 Pu) and has been historically synthesized via the calcination of a Np oxalate precursor. Alternative synthesis methods for NpO 2 are now more prevalent, necessitating their study and comparison with the more common oxalate route. The purpose of this work was to investigate the microstructural properties of NpO 2 synthesized from a nitrate-based Np precursor phase via the assessment of NpO 2 particle size and morphology as a function of calcination temperature and time. Scanning electron microscopy (SEM) was used to probe the primary grain size and morphology of NpO 2 after calcination at temperatures ranging from 700 to 1100 °C and hold times ranging from 1 to 10 h. Post-image analysis using ImageJ software enabled the quantification of mean particle diameter. This analysis indicated that particle diameter increases with both increasing calcination temperature and hold time. Primary particles were shown to be clumped in irregular patterns into the overall rough, blocky aggregates, but this macroscopic morphology was not affected by calcination time or temperature. Although trends in primary grain size of NpO 2 were consistent with available literature from other Np precursor phases, the macroscopic morphology of the NpO 2 aggregates was quite different than reported for other precursors. Through comparison with historical literature on Np oxalate, this work emphasizes the importance of Np precursor on the physical properties of NpO 2 .

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Radiative transition probabilities of neutral and singly ionized rare earth elements (La, Ce, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu) estimated by laser-induced breakdown spectroscopy

Rare earth elements (REEs) are essential to society given their prevalence in many modern technologies. Quantitative elemental analysis of REEs is therefore a critical capability. Calibration free–laser-induced breakdown spectroscopy (CF-LIBS) is a rapidly maturing and promising approach to quantitative elemental analysis with many attractive qualities. The application of CF-LIBS to analyzing samples containing the REEs is hindered by a lack of fundamental data, specifically transition probabilities (TPs). As such, this study seeks to help address this knowledge deficiency by reporting 967 previously unreported TPs for 13 REEs (lanthanum, cerium, praseodymium, neodymium, samarium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, and lutetium). The method developed in this study to estimate the TPs requires small amounts of material (a few nanograms) compared with other approaches (~ milligrams), uses non-specialized equipment, and does not involve complicated sample preparations.

(LIBS)↗
DOE OSTI2021

Engineering the beat phenomenon of quasi-Rayleigh waves for regions with minimal Surface Acoustic Wave (SAW) amplitude

Surface Acoustic Waves (SAW) are prevalent in a variety of scientific fields. Typically, the ability to manipulate these surface waves has a significant impact on the efficacy of any SAW-based device. In this paper, we present a simple method for designing localized regions that have minimal SAW amplitude. These localized regions have valley-like drops in SAW amplitude and are achieved by using the spatial beat phenomenon of quasi-Rayleigh waves. Controlling the beat phenomenon allows us to manipulate where and how these localized regions appear in the waveguide. In particular, the localized regions can be designed to have variable widths and can be positioned consecutively due to minimal wave scattering. The design methodology and physics are described in detail, and several supplementary simulations are provided to demonstrate the efficacy of the proposed method. Finally, we briefly discuss how the proposed approach could potentially be exploited to implement a localized high-pass filter and enables SAW wave propagation that avoids surface obstacles.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Ride-hailing and taxi versus walking: Long term forecasts and implications from large-scale behavioral data

Introduction: Although ride-hailing and taxi trips can potentially reduce single-occupant vehicle trips and auto ownership, they can also replace pedestrian trips. Because physical activity is associated with improved health outcomes, the extent to which ride-hailing and taxi travel captures walking's mode share is of interest to policymakers. Methods: Based on large-scale behavioral data from the 2017 U.S. National Household Travel Survey, this paper reports on the development of a full Bayesian logistic regression model for determining the mode split between (1) ride-hailing and taxi and (2) walk while accounting for unobserved heterogeneity. The results from the stand-alone model inform two longer-term travel forecasting scenarios: a) higher risk of walk trips converting to ride-hailing and taxi, specifically in the future with high prevalence of automated vehicles, b) higher probability of such trips remaining as walking. Results: The results revealed that some of the important characteristics that increase the likelihood of a traveler using the ride-hailing and taxi mode versus walking include having a longer trip, using a smartphone to access the internet, having an interest in technologies, having a medical condition, and living in a metropolitan area with rail access. Further, the results from the first scenario suggest that an overall increase of up to 2.9% in the ride-hailing and taxi mode share may be expected. The second scenario shows that between 68% and 76% of ride-hailing and taxi trips could be diverted to walking if supportive pedestrian infrastructure were provided in the case study locations. The planning process can be adapted to consider not only congestion, crash, and emissions impacts of such shifts but also the effects of a loss of physical activity. Conclusions: The study findings show how the ride-hailing and taxi mode competes with walking. Further, the findings enable planners to update their regional travel forecasting models; policy makers can thus encourage active travel by prioritizing pedestrian infrastructure investments that may divert ride-hailing and taxi trips to walking. However, equity should be a key consideration to ensure that addressing the competition between these two modal choices does not hinder the provision of pedestrian facilities in communities that depend on walking.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2022

High strain-rate compression behavior of polymeric rod and plate Kelvin lattice structures

The compressive high strain-rate behavior of polymeric Kelvin lattice structures with rod-based or plate-based unit cells was investigated through experimental techniques and finite element simulations. Polymeric lattice structures with 5x5x5 unit cell geometries were manufactured on the millimeter scale using vat polymerization additive manufacturing and tested at low (0.001/s) and high (1000/s) strain-rates. High strain-rate experiments were performed and validated for a viscoelastic split-Hopkinson (Kolsky) pressure bar system (SHPB) coupled with high-speed imaging and digital image correlation (DIC). Experimental results at both low and high strain-rates show the formation of a localized deformation band which was more prevalent in low relative density specimens and low strain-rate experiments. Strain-rate effects of lattice specimens strongly correlate with effects of the base polymer material; both bulk polymer and lattice specimen demonstrated strain-rate hardening, strain-rate stiffening, and decreased fracture strain under dynamic loading. Results show mechanical failure properties and energy absorption depended strongly on the relative density of the lattice specimen and exhibited distinct scaling between relative density and geometry type (rod, plate) and loading rate. High relative density plate-lattices demonstrated inferior mechanical properties to rod-lattices; however, there exists a critical relative density for a given mechanical property (17%- 28%) below which plate-lattices outperform rod-lattices of similar mass. As a result, high strain-rate explicit finite element simulations were performed and showed good agreement with the mechanical failure trends and deformation modes observed in the experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Tapping the treasure trove of atypical phages

With advancements in genomics technologies, a vast diversity of ‘atypical’ phages, that is, with single-stranded DNA or RNA genomes, are being uncovered from different ecosystems. Though these efforts have revealed the existence and prevalence of these nonmodel phages, computational approaches often fail to associate these phages with their specific bacterial host(s), while the lack of methods to isolate these phages has limited our ability to characterize infectivity pathways and new gene function. In this review, we call for the development of generalizable experimental methods to better capture this understudied viral diversity via isolation and study them through gene-level characterization and engineering. Establishing a diverse set of new ‘atypical’ phage model systems has the potential to provide many new biotechnologies, including potential uses of these atypical phages in halting the spread of antibiotic resistance and engineering of microbial communities for beneficial outcomes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Local stress within a granular molecular solvent matrix, a mechanism for individual ion hydration

The activity of water is important in many natural systems and directed processes. To better understand water activity, the hydration of individual ions is approximated for a recently developed speciation-based solution model. Here a matrix of values for hydration of complete salts (anion and cation) was used as source data to calculate individual ion hydration values. Some electrolytes were excluded from calculations of individual ion hydration due to the prevalence of ion pairing and resulting liberation of water upon ion pairing. Evaluation of the periodic trends emerging from individual ion hydration values suggests that ionic volume, relative to the volume of molecular water, dictates both modeled hydration requirements (related to vapor-liquid-equilibrium-derived activity) as well as properties historically described by hydrodynamic radius (ion diffusion and solution viscosity). When water is conceptualized as a granular three-dimensional matrix, solutes may function as substitutional defects (dilation or constriction) inducing local compressive or tensile stress. These results have implications on the mechanism of the Hofmeister series and series reversals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗