Search NASA⌕ Search

SEARCH · Search NASA

Results for “Temperature Green function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Continuous-wave GaAs/AlGaAs quantum cascade laser at 5.7 THz

Design strategies for improving terahertz (THz) quantum cascade lasers (QCLs) in the 5–6 THz range are investigated numerically and experimentally, with the goal of overcoming the degradation in performance that occurs as the laser frequency approaches the Reststrahlen band. Two designs aimed at 5.4 THz were selected: one optimized for lower power dissipation and one optimized for better temperature performance. The active regions exhibited broadband gain, with the strongest modes lasing in the 5.3–5.6 THz range, but with other various modes observed ranging from 4.76 to 6.03 THz. Pulsed and continuous-wave (cw) operation is observed up to temperatures of 117 K and 68 K, respectively. In cw mode, the ridge laser has modes up to 5.71 THz – the highest reported frequency for a THz QCL in cw mode. The waveguide loss associated with the doped contact layers and metallization is identified as a critical limitation to performance above 5 THz.

47 OTHER INSTRUMENTATION↗

Al x In 1-x P LEDs with II-VI Cladding Layers for Efficient Red and Amber Emission. Final Scientific & Technical Report

Realizing solid state lighting systems with high efficiency and enhanced functionality will require the adoption of color-mixing (cm-LEDs) architectures combining highly efficient red, green, blue and amber light emitting diodes. Already, the hybrid architectures (hy-LEDs) pair phosphor-converted wide bandgap nitride LEDs with (Al x Ga 1-x ) 0.51 In 0.49 P red LEDs to improve the emission spectrum and reduce losses in the infrared. However, the efficiencies of (Al x Ga 1-x ) 0.51 In 0.49 P red and amber LEDs are still too low to truly enable these approaches. The DOE Solid-State Lighting R&D Plan highlights red and amber LED improvement as a long-term research goal. Excessive electron leakage out of the cladding layers, in particular, leads to strong thermal droop and red LED efficiencies of ~25% at normal operating temperatures. The typical device architecture for red and amber LEDs is based on indirect bandgap (Al y Ga 1-y ) 0.51 In 0.49 P cladding layers used to confine injected electrons and holes within a lower, direct bandgap (Al x Ga 1-x ) 0.51 In 0.49 P light-emitting active layer (x < y). The challenge with this approach is that the electron confinement is limited and decreases as the emission wavelength is shortened. Hence, thermal droop and overall device efficiency are very poor for amber LEDs. Innovative solutions to this problem must be sought through the use of new semiconductor materials and structures that will increase electron confinement. We plan to develop Al x In 1-x P LEDs with a II-VI semiconductor electron cladding layer to greatly increase the carrier confinement. Such an approach has the potential to improve red and amber LED efficiency, temperature stability, and light extraction. Al x In 1-x P active layers provide high direct bandgap energies needed to reach amber wavelengths without detrimental internal losses. ZnSe-based alloys are attractive candidates for the electron cladding layer because they can be engineered to provide high conduction band energies relative to the Al x In 1-x P active layer while maintaining roughly the same lattice constant. The lower index of refraction of the II-VI cladding layer will also aid light extraction. While extended defects have largely precluded the use of II-VI semiconductors as the light emitting layer in LEDs and lasers, the effects of these defects on device performance can be mitigated by limiting the use of II-VI materials to the thin, heavily doped cladding layer. Proposed research will focus on optimizing the quality of the Al x In 1-x P active layer and the heteropolar growth of the III-V/II-VI interface, tuning the II-VI cladding layer composition, and device design to maximize electron confinement and LED efficiency. Significant improvement in the performance of red and amber LEDs through this new approach is expected to advance the capabilities of next generation solid-state lighting technologies.

36 MATERIALS SCIENCE↗

Engineering acid-base active sites on an N-doped biochar catalyst for microwave-assisted biodiesel production from waste cooking oil

Acid-base bifunctional catalysts play a crucial role in converting high-free fatty acid (FFA) feedstocks into biodiesel by enabling the simultaneous esterification and transesterification of triglycerides in a single step, thereby minimizing saponification and streamlining the process. In this study, we report the design and development of a novel N-doped acid-base bifunctional biochar catalyst synthesized from renewable biomass precursors- glucose and chitosan. The catalyst’s acidic sites were introduced via surface functionalization with o-sulfobenzoic acid cyclic anhydride, grafting -SO₃H groups onto the carbon framework, while basic sites were generated from amine functionalities (-NH) derived from chitosan, yielding a robust and truly bifunctional surface. The catalyst was characterized and used for the microwave-assisted transesterification of waste cooking oil, and process optimization using response surface methodology (RSM-CCD) yielding a maximum biodiesel yield of 98.8 ± 0.4% under optimal conditions (methanol-to-oil molar ratio 20:1, catalyst loading 5.7 wt%, temperature 99 °C, and reaction time 46.6 min). The catalyst demonstrated good stability, maintaining a yield of 92.2 ± 0.4% after eight reuse cycles. A Life Cycle Assessment (LCA) conducted for 1 kg of biodiesel production revealed a global warming potential of 0.85 kg CO 2 eq and human toxicity potential of 1.59 kg 1,4-DB eq, with the largest environmental contributions arising from catalyst preparation and reuse. In conclusion, this work highlights a green and circular approach to biodiesel production, combining renewable catalyst design, waste feedstock utilization, and quantitative sustainability assessment to guide future developments in sustainable catalysis and biofuel engineering.

Bifunctional catalyst↗

Superconductivity from Luttinger surfaces: Emergent Sachdev-Ye-Kitaev physics with infinite-body interactions

The pairing of two electrons on a Fermi surface due to an infinitesimal attraction between them always results in a superconducting instability at zero temperature (T = 0). The equivalent question of pairing instability on a Luttinger surface (LS)—190a contour of zeros of the propagator—instead leads to a quantum critical point (QCP) that separates a non-Fermi liquid and superconductor. A surprising and little understood aspect of pair fluctuations at this QCP is that their thermodynamics maps to that of the Sachdev-Ye-Kitaev (SYK) model in the strong coupling limit. Here, we offer a simple justification for this mapping by demonstrating that (i) LS models share the reparametrization symmetry of the q → ∞ SYK model with q-body interactions close to the LS, and (ii) the enforcement of gauge invariance results in a $\frac{1}{√τ}$ (τ ~ T -1 ) behavior of the fluctuation propagator near the QCP, as is the feature of SYK conformal Green functions, but leaves the overall form of the free energy map robust.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A New Candidate Laser Dye Based 1,4-Bis[β-(2-Naphthothiazolyle)Vinyl]Benzene. Spectroscopic Behavior, Laser Parameters and Excitation Energy Transfer

A new candidate laser dye based 1,4-bis[β-(2-naphthothisolyl) vinyl] benzene (BNTVB) were prepared, and characterized in various organic solvents. The center polarity is less sensitive than electronic absorption. A red shift was noticed in the fluorescence spectra (ca. 40 nm) with increment in the solvent’s polarity, this means that BNTVB’s polarity appreciates upon excitation. The dipole moment of ground state (μ{sub g}) and the excited singlet state dipole moment (μ{sub e}) are determined from Kawski – Chamma and Bakshiev–Viallet equations using the disparity of Stokes shift with solvent polarity function of ε (dielectric constant) and n (refractive index) of the solvent. The result was found to be 0.019D and 5.13D for ground and exited state, in succession. DFT/TD-DFT manners were used to understand the electronic structures and geometric of BNTVB in other solvents. The experimental and theoretical results showed a good agreement. The photochemical quantum yield (Ф{sub c}) of BNTVB was calculated in variable organic reagents such as Dioxane, CHCl{sub 3}, EtOH and MeOH at room temperature. The values of φ{sub c} were calculated as 2.3 × 10{sup −4}, 3.3 × 10{sup −3}, 9.7 × 10{sup −5} and 6.2 × 10{sup −5} in Dioxane, CHCl{sub 3}, EtOH and MeOH, respectively. The dye solutions (2 × 10{sup −4} M) in DMF, MeOH and EtOH give laser emission in the blue-green region. The green zone is excited by nitrogen pulse 337.1 nm. The tuning range, gain coefficient (α) and cross – section emission (σ{sub e}) of laser were also estimated. Excitation energy transfer from BNTVB to rhodamine-6G (R6G) and N,N-bis(2,6-dimethyphenyl)-3,4:9,10-perylenebis-(dicarboximide) (BDP) was also studied in EtOH to increase the laser emission output from R6G and BDP when excited by nitrogen laser. The dye-transfer power laser system (ETDL) obeys the Foster Power Transmission (FERT) mechanism with a critical transmission distance, R{sub o} of 40 and 32 A and k{sub ET} equals 2.6 × 10{sup 13} and 1.06 × 10{sup 13} M{sup −1} s{sup −1} for BNTVB / R6G and BNTVB / BDP pair, respectively.

74 ATOMIC AND MOLECULAR PHYSICS↗

Optimizing Blue Persistent Luminescence in (Sr 1-δ Ba δ ) 2 MgSi 2 O 7: Eu 2+ ,Dy 3+ via Solid Solution for Use in Point-of-Care Diagnostics

Inorganic persistent luminescent phosphors are an excellent class of optical reporters for enabling sensitive point-of-care diagnostics, particularly with smartphone-based biosensing devices in testing formats such as the lateral flow assay (LFA). Here, the development of persistent phosphors for this application is focused on the solid solution (Sr 1-δ Ba δ ) 2 MgSi 2 O 7 :Eu 2 +,Dy 3+ (δ = 0, 0.125, 0.25, 0.375), which is prepared using a high-temperature solid-state reaction as confirmed by synchrotron X-ray powder diffraction. The substitution of barium for strontium enables control over the Eu 2+ 5d-orbital crystal field splitting (CFS) as a tool for tuning the emission wavelength while maintaining luminescence lifetimes >9 min across the composition range. Thermoluminescence measurements of the solid solution provide evidence that trap states contribute to the persistent lifetimes with the trap depths also remaining constant as a function of composition. Time-gated luminescence images of these compounds are captured on a smartphone arranged in a layout to mimic a point-of-care test and demonstrate the viability of using these materials as optical reporters. Moreover, comparing the blue-emitting (Sr 0.625 Ba 0.375 ) 2 MgSi 2 O 7 :Eu 2+ ,Dy 3+ and the green-emitting SrAl 2 O 4: Eu 2+ ,Dy 3+ in a single LFA-type format shows these two compounds can be detected and resolved simultaneously, thereby permitting the development of a multiplexed LFA.

36 MATERIALS SCIENCE↗

Broken Luttinger theorem in the two-dimensional Fermi-Hubbard model

One of the fundamental questions about high-temperature cuprate superconductors is the size of the Fermi surface underlying the superconducting state. By analyzing the single-particle spectral function for the Fermi-Hubbard model as a function of repulsion U and chemical potential μ, we find that the Fermi surface in the normal state undergoes a transition from a large Fermi surface matching the Luttinger volume as expected in a Fermi liquid, to a Fermi surface that encloses fewer electrons that we dub the “Luttinger breaking” phase, as the Mott insulator is approached. This transition into a non-Fermi-liquid phase that violates the Luttinger count occurs at a critical density in the absence of any other broken symmetry. We obtain the Fermi-surface contour from the spectral weight A k (ω = 0) and from an analysis of the singularities of the Green's function Re G k (E = 0), calculated using determinantal quantum Monte Carlo and analytic continuation methods. We discuss our numerical results in connection with experiments on Hall measurements, scanning tunneling spectroscopy, and angle-resolved photoemission spectroscopy.

36 MATERIALS SCIENCE↗

Green Synthesis and Antioxidant Study of Silver Nanoparticles of Root Extract of Sageretia thea and Its Role in Oxidation Protection Technology

Development of environmentally friendly synthesis of nanoparticles is one of the important areas of research in nanotechnology. In present study silver naopartticles (AgNPs) of root extract of Sageretia thea (S. thea) were synthesized at room temperature. The synthesized AgNPs were characterized by UV. Visible spectroscopy (UV), scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive spectroscopy (EDX), transmission electron microscopy (TEM), dynamic light scattering (DLS) and Fourier transform infrared (FT-IR) spectroscopy. Formation of AgNPs was confirmed by visual examination the colour change from yellow to brick red due to surface Plasmon resonance band at 435 nm. SEM and TEM analysis of synthesized AgNPs revealed spherical morphology with average particle size 25 nm. Crystalline nature of the AgNPs in face centered cubic structure is evident from the selected area electron diffraction (SAED) and XRD pattern. The presence of elemental Ag was confirmed by EDX analysis at 3kv. Different functional groups which responsible for reduction and stabilization of reaction medium was confirmed by FTIR spectroscopy. The biosynthesized AgNPs showed strong DPPH and dye protection radical scavenging assay while modest hydrogen peroxide radical scavenging assay as compare to crude extract. The present investigations suggest that biosynthesized nanoparticles have a high potential for use in the preparation of drugs used against various diseases and also a promising candidate for many medical applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The solubility of ErPO 4 and Er speciation in hydrothermal fluids at varying pH and salinity between 350 and 450 °C

The rare earth elements (REE) are important for the green-energy transition and can be incorporated into the REE phosphates, such as xenotime-(Y), which also hosts heavy REE (Tb– Lu). Xenotime-(Y) is a common accessory mineral in metamorphic rocks and a range of mineral deposits where it controls the mobility of heavy REE, however, the impact of high temperature aqueous fluids on the behavior of heavy REE is largely unknown. Thermodynamic modeling can be utilized as a tool to predict the mobility of REE in hydrothermal aqueous fluids, but must be supported by accurate experimental data. Here, we measured the solubility of endmember synthetic xenotime-structured ErPO4 in NaCl-HCl-NaOH-bearing aqueous solutions at 350 °C and water vapor saturation pressure, at 400 and at 450 °C and 500 bar using batch-type Inconel reactors. Erbium speciation was investigated as a function of pH from 2.8 to 8, where Er chloride species are predominant at acidic conditions (pH <3) and Er hydroxyl complexes are predominant at near- neutral to alkaline conditions (pH >3). At pH 7–9, the measured ErPO 4 solubility (-9.8 to -7.5 log m Er ) is up to 2.5 orders of magnitude lower than thermodynamic predictions (-9.4 to -6.7 log m Er ) using existing thermodynamic databases. At pH 2–3, the predicted ErPO 4 solubility is ~0.5 orders of magnitude higher at 350 °C and ~1 order of magnitude lower at 450 °C compared to experimentally measured Er concentrations. The thermodynamic properties of aqueous Er species were therefore revised in this study. The partial molal Gibbs energy of formation (Δ f G 0 T,P ) for aqueous Er hydroxyl and chloride species are optimized using GEMSFITS and the logarithmic formation constants (logβ n ( Cl,OH) ) were derived at each experimental temperature and pressure. The updated thermodynamic properties for Er hydroxyl species (Er(OH) +2 , Er(OH) 2 + , and Er(OH) 3 0 ) show that their stability shifts to more acidic conditions at and below 400 °C. The Er chloride species (ErCl +2 and ErCl 2 + ) show increased stability compared to Er hydroxyl species at temperatures of 450 °C and 0.01 mol/kg NaCl. The updated thermodynamic properties are implemented into the GEM-Selektor modeling package to investigate the mobility of Er in saline hydrothermal fluids in equilibrium with alkaline rocks. Importantly, the updated properties for Er hydroxyl species result in low Er solubility at rock equilibrated pH conditions due to an expanded hydroxyl predominance zone, but lower aqueous complex stability overall, whereas previous models suggest greater stability for aqueous Er species. Furthermore, ErPO 4 solubility increases with decreasing temperature due to the deprotonation of HCl, which increases the acidity of hydrothermal fluids and the availability of Cl - to complex with the REE. These simulations highlight how fluid-rock reaction and temperature affect the mobility of REE in hydrothermal ore-forming systems.

58 GEOSCIENCES↗

Numerical evaluation of Auger recombination coefficients in relaxed and strained germanium

The potential applications of germanium and its alloys in infrared silicon-based photonics have led to a renewed interest in their optical properties. In this letter, we report on the numerical determination of Auger coefficients at T = 300 K for relaxed and biaxially strained germanium. We use a Green's function based model that takes into account all relevant direct and phonon-assisted processes and perform calculations up to a strain level corresponding to the transition from indirect to direct energy gap. We have considered excess carrier concentrations ranging from 10{sup 16} cm{sup −3} to 5 × 10{sup 19} cm{sup −3}. For use in device level simulations, we also provide fitting formulas for the calculated electron and hole Auger coefficients as functions of carrier density.

36 MATERIALS SCIENCE↗

Covalently integrated silica nanoparticles in poly(ethylene glycol)-based acrylate resins: thermomechanical, swelling, and morphological behavior

Nanocomposites integrate functional nanofillers into viscoelastic matrices for electronics, lightweight structural materials, and tissue engineering. Herein, the effect of methacrylate-functionalized (MA-SiO 2 ) and vinyl-functionalized (V-SiO 2 ) silica nanoparticles on the thermal, mechanical, physical, and morphological characteristics of poly(ethylene glycol) (PEG) nanocomposites was investigated. The gel fraction of V-SiO 2 composites decreases upon addition of 3.8 wt% but increases with further addition (>7.4 wt%) until it reaches a plateau at 10.7 wt%. The MA-SiO 2 induced no significant changes in gel fraction and both V-SiO 2 and MA-SiO 2 nanoparticles had a negligible impact on the nanocomposite glass transition temperature and water absorption. The Young's modulus and ultimate compressive stress increased with increasing nanoparticle concentration for both nanoparticles. Due to the higher crosslink density, MA-SiO 2 composites reached a maximum mechanical stress at a concentration of 7.4 wt%, while V-SiO 2 composites reached a maximum at a concentration of 10.7 wt%. Scanning electron microscopy, transmission electron microscopy, and small-angle X-ray scattering revealed a bimodal size distribution for V-SiO 2 and a monomodal size distribution for MA-SiO 2 . Although aggregates were observed for both nanoparticle surface treatments, V-SiO 2 dispersion was poor while MA-SiO 2 were generally well-dispersed. Finally, these findings lay the framework for silica nanofillers in PEG-based nanocomposites for advanced manufacturing applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intelligent Facades for High Performance Green Buildings

Progress Towards Net-Zero and Net-Positive-Energy Commercial Buildings and Urban Districts Through Intelligent Building Envelope Strategies Previous research and development of intelligent facades systems has been limited in their contribution towards national goals for achieving on-site net zero buildings, because this R&D has failed to couple the many qualitative requirements of building envelopes such as the provision of daylighting, access to exterior views, satisfying aesthetic and cultural characteristics, with the quantitative metrics of energy harvesting, storage and redistribution. To achieve energy self-sufficiency from on-site solar resources, building envelopes can and must address this gamut of concerns simultaneously. With this project, we have undertaken a high-performance building integrated combined-heat and power concentrating photovoltaic system with high temperature thermal capture, storage and transport towards multiple applications (BICPV/T). The critical contribution we are offering with the Integrated Concentrating Solar Façade (ICSF) is conceived to improve daylighting quality for improved health of occupants and mitigate solar heat gain while maximally capturing and transferring onsite solar energy. The ICSF accomplishes this multi-functionality by intercepting only the direct-normal component of solar energy (which is responsible for elevated cooling loads) thereby transforming a previously problematic source of energy into a high quality resource that can be applied to building demands such as heating, cooling, dehumidification, domestic hot water, and possible further augmentation of electrical generation through organic Rankine cycles. With the ICSF technology, our team is addressing the global challenge in transitioning commercial and residential building stock towards on-site clean energy self-sufficiency, by fully integrating innovative environmental control systems strategies within an intelligent and responsively dynamic building envelope. The advantage of being able to use the entire solar spectrum for active and passive benefits, along with the potential savings of avoiding transmission losses through direct current (DC) transfer to all buildings systems directly from the site of solar conversion, gives the system a compounded economic viability within the commercial and institutional building markets. With a team that spans multiple stakeholders across disparate industries, from CPV to A&E partners that are responsible for the design and development of District and Regional Scale Urban Development, this project demonstrates that integrating utility-scale high efficiency CPV installations with urban and suburban environments is both viable and desirable within the marketplace. The historical schism between utility scale CPV and BIPV has been one of differing scale and cultures. There is no technical reason why utility-scale CPV cannot be located within urban embedded district scale sites of energy harvesting. New models for leasing large areas of district scale roofs and facades are emerging, such that the model for utility scale energy harvesting can be reconciled to commercial and public scale building sites and campuses. This consortium is designed to unite utility scale solar harvesting into building applications for smart grid development.

14 SOLAR ENERGY↗

Toward Global Regional Seismic Moment Tensor Inversion with Three-Dimensional Earth Models for Nuclear Explosion Monitoring with Sparse Networks: Demonstration of Reciprocity for Strain Greens Tensor Database Simulation with Salvus

Seismic source characterization is an essential function of global nuclear explosion monitoring (NEM). While large events (roughly with moment magnitude, M w , greater than 5.0) can often be easily detected, located and identified with high signal-to-noise ratios at teleseismic distances (> 20°), trends in NEM research require confident source characterization at much lower magnitudes (say down to 3.0) and exploitation of sparse observations (from only a few stations) at regional distance (< 20°). Regional distance waveform inversion to characterize sources is now widely used and effective (e.g. Ford et al., 2009; Alvizuri and Tape, 2018; Alvizuri et al., 2018; Chiang et al., 2018; Ford et al., 2022). These methods obtain the magnitude, depth and seismic moment tensor, which represents the forces that excited the observed seismic waves (slip on an earthquake fault, explosion, collapse or a combination of various forces). Common to many problems in seismology, the isolation of the source 2 properties requires removal of path propagation effects that waves experience while traveling through the three-dimensional (3D) Earth (the structure exists due to different rock types, material properties, temperature and tectonic processes).

58 GEOSCIENCES↗

THE BOLOCAM GALACTIC PLANE SURVEY. VII. CHARACTERIZING THE PROPERTIES OF MASSIVE STAR-FORMING REGIONS

We present the results of a Green Bank Telescope survey of NH{sub 3}(1,1), (2,2), (3,3) lines toward 631 Bolocam Galactic Plane Survey (BGPS) sources at a range of Galactic longitudes in the inner Galaxy. We have detected the NH{sub 3}(1,1) line toward 72% of our targets (456), demonstrating that the high column density features identified in the BGPS and other continuum surveys accurately predict the presence of dense gas. We have determined kinematic distances and resolved the distance ambiguity for all BGPS sources detected in NH{sub 3}. The BGPS sources trace the locations of the Scutum and Sagittarius spiral arms, with the number of sources. We measure the physical properties of each source and find that depending on the distance, BGPS sources are primarily clumps, with some cores and clouds. We have examined the physical properties as a function of Galactocentric distance, and find a mean gas kinetic temperature of 15.6 K, and that the NH{sub 3} column density and abundance decrease by nearly an order of magnitude. Comparing sources at similar distances demonstrates that the physical properties are indistinguishable, which suggests a similarity in clump structure across the Galactic disk. We have also compared the BGPS sources to criteria for efficient star formation presented independently by Heiderman et al. and Lada et al., and for massive star formation presented by Kauffmann et al. Forty-eight percent of our sample should be forming stars (including massive stars) with high efficiency, and 87% contain subregions that should be efficiently forming stars. Indeed, we find that 67% of the sample exhibit signs of star formation activity based on an association with a mid-infrared source.

79 ASTRONOMY AND ASTROPHYSICS↗

Dynamics of straight vortex filaments in a Bose–Einstein condensate with the Gaussian density profile

The dynamics of interacting quantized vortex filaments in a rotating Bose–Einstein condensate existing in the Thomas–Fermi regime at zero temperature and obeying the Gross–Pitaevskii equation has been considered in the hydrodynamic “nonelastic” approximation. A noncanonical Hamilton equation of motion for the macroscopically averaged vorticity has been derived for a smoothly inhomogeneous array of filaments (vortex lattice) taking into account spatial nonuniformity of the equilibrium density of the condensate, which is determined by the trap potential. The minimum of the corresponding Hamiltonian describes the static configuration of the deformed vortex lattice against the preset density background. The condition of minimum can be reduced to a nonlinear second-order partial differential vector equation for which some exact and approximate solutions are obtained. It has been shown that if the condensate density has an anisotropic Gaussian profile, the equation of motion for the averaged vorticity has solutions in the form of a vector exhibiting a nontrivial time dependence, but homogeneous in space. An integral representation has also been obtained for the matrix Green function that determines the nonlocal Hamiltonian of a system of several quantized vortices of an arbitrary shape in a Bose–Einstein condensate with the Gaussian density. In particular, if all filaments are straight and oriented along one of the principal axes of the ellipsoid, we have a finitedimensional reduction that can describe the dynamics of the system of pointlike vortices against an inhomogeneous background. A simple approximate expression is proposed for the 2D Green function with an arbitrary density profile and is compared numerically with the exact result in the Gaussian case. The corresponding approximate equations of motion, describing the long-wavelength dynamics of interacting vortex filaments in condensates with a density depending only on transverse coordinates, have been derived.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tracking Seasonal and Interannual Variability in Photosynthetic Downregulation in Response to Water Stress at a Temperate Deciduous Forest

Abstract The understanding and modeling of photosynthetic dynamics affected by climate variability can be highly uncertain. In this paper, we examined a well‐characterized eddy covariance site in a drought‐prone temperate deciduous broadleaf forest combining tower measurements and satellite observations. We find that an increase in spring temperature usually leads to enhanced spring gross primary production (GPP), but a GPP reduction in late growing season due to water limitation. We evaluated how well a coupled fluorescence‐photosynthesis model (SCOPE) and satellite data sets track the interannual and seasonal variations of tower GPP from 2007 to 2016. In SCOPE, a simple stress factor scaling of Vcmax as a linear function of observed predawn leaf water potential ( ψ pd ) shows a good agreement between modeled and measured interannual variations in both GPP and solar‐induced chlorophyll fluorescence (SIF) from the Global Ozone Monitoring Experiment‐2 (GOME‐2). The modeled and satellite‐observed changes in SIF yield are ~30% smaller than corresponding changes in light use efficiency (LUE) under severe stress, for which a common linear SIF to GPP scaling would underestimate the stress reduction in GPP. Overall, GOME‐2 SIF tracks interannual tower GPP variations better than satellite vegetations indices (VIs) representing canopy “greenness.” However, it is still challenging to attribute observed SIF variations unequivocally to greenness or physiological changes due to large GOME‐2 footprint. Higher‐resolution SIF data sets (e.g., TROPOMI) already show the potential to well capture the downregulation of late‐season GPP and could pave the way to better disentangle canopy structural and physiological changes in the future.

He, Liyin↗

Closo ‐Borate Gel Polymer Electrolyte with Remarkable Electrochemical Stability and a Wide Operating Temperature Window

Abstract A major challenge in the pursuit of higher‐energy‐density lithium batteries for carbon‐neutral‐mobility is electrolyte compatibility with a lithium metal electrode. This study demonstrates the robust and stable nature of a closo ‐borate based gel polymer electrolyte (GPE), which enables outstanding electrochemical stability and capacity retention upon extensive cycling. The GPE developed herein has an ionic conductivity of 7.3 × 10 −4 S cm −2 at room temperature and stability over a wide temperature range from −35 to 80 °C with a high lithium transference number ( = 0.51). Multinuclear nuclear magnetic resonance and Fourier transform infrared are used to understand the solvation environment and interaction between the GPE components. Density functional theory calculations are leveraged to gain additional insight into the coordination environment and support spectroscopic interpretations. The GPE is also established to be a suitable electrolyte for extended cycling with four different active electrode materials when paired with a lithium metal electrode. The GPE can also be incorporated into a flexible battery that is capable of being cut and still functional. The incorporation of a closo ‐borate into a gel polymer matrix represents a new direction for enhancing the electrochemical and physical properties of this class of materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insights Gained from Testing Alternate Cell Designs

The Idaho National Laboratory (INL) has been researching the application of solid-oxide electrolysis cell for large-scale hydrogen production from steam over a temperature range of 800 to 900ºC. The INL has been testing various solid oxide cell designs to characterize their electrolytic performance operating in the electrolysis mode for hydrogen production. Some results presented in this report were obtained from cells, initially developed by the Forschungszentrum Jülich and now manufactured by the French ceramics firm St. Gobain. These cells have an active area of 16 cm2 per cell. They were initially developed as fuel cells, but are being tested as electrolytic cells in the INL test stands. The electrolysis cells are electrode-supported, with ~10 µm thick yttria-stabilized zirconia (YSZ) electrolytes, ~1400 µm thick nickel-YSZ steam-hydrogen electrodes, and manganite (LSM) air-oxygen electrodes. The experiments were performed over a range of steam inlet mole fractions (0.1 to 0.6), gas flow rates, and current densities (0 to 0.6 A/cm2). Steam consumption rates associated with electrolysis were measured directly using inlet and outlet dewpoint instrumentation. On a molar basis, the steam consumption rate is equal to the hydrogen production rate. Cell performance was evaluated by performing DC potential sweeps at 800, 850, and 900°C. The voltage-current characteristics are presented, along with values of area-specific resistance as a function of current density. Long-term cell performance is also assessed to evaluate cell degradation. Details of the custom single-cell test apparatus developed for these experiments are also presented. NASA, in conjunction with the University of Toledo, has developed another fuel cell concept with the goals of reduced weight and high power density. The NASA cell is structurally symmetrical, with both electrodes supporting the thin electrolyte and containing micro-channels for gas diffusion. This configuration is called a bi-electrode supported cell or BSC. The electrodes are made by freeze-casting, a modified tape casting technique which creates the many micro-channels in the YSZ electrode green tape. This report presents results of the INL’s testing of this new solid oxide cell design as an electrolyzer. Gas composition, operating voltage, and other parameters were varied during testing. Results to date show the NASA cell to be a promising design for both high power-to-weight fuel cell and electrolyzer applications.

08 HYDROGEN↗