Search NASA⌕ Search

SEARCH · Search NASA

Results for “discrepancy reporting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Intercomparison of Models Representing Direct Shortwave Radiative Forcing by Sulfate Aerosols

The importance of aerosols as agents of climate change has recently been highlighted. However, the magnitude of aerosol forcing by scattering of shortwave radiation (direct forcing) is still very uncertain even for the relatively well characterized sulfate aerosol. A potential source of uncertainty is in the model representation of aerosol optical properties and aerosol influences on radiative transfer in the atmosphere. Although radiative transfer methods and codes have been compared in the past, these comparisons have not focused on aerosol forcing (change in net radiative flux at the top of the atmosphere). Here we report results of a project involving 12 groups using 15 models to examine radiative forcing by sulfate aerosol for a wide range of values of particle radius, aerosol optical depth, surface albedo, and solar zenith angle. Among the models that were employed were high and low spectral resolution models incorporating a variety of radiative transfer approximations as well as a line-by-line model. The normalized forcings (forcing per sulfate column burden) obtained with the several radiative transfer models were examined, and the discrepancies were characterized. All models simulate forcings of comparable amplitude and exhibit a similar dependence on input parameters. As expected for a non-light-absorbing aerosol, forcings were negative (cooling influence) except at high surface albedo combined with small solar zenith angle. The relative standard deviation of the zenith-angle-averaged normalized broadband forcing for 15 models-was 8% for particle radius near the maximum in this forcing (approx. 0.2 microns) and at low surface albedo. Somewhat greater model-to-model discrepancies were exhibited at specific solar zenith angles. Still greater discrepancies were exhibited at small particle radii and much greater discrepancies were exhibited at high surface albedos, at which the forcing changes sign; in these situations, however, the normalized forcing is quite small quite small. Discrepancies among the models arise from inaccuracies in Mie calculations, differing treatment of the angular scattering phase function, differing wavelength and angular resolution, and differing treatment of multiple scattering. These results imply the need for standardized radiative transfer methods tailored to the direct aerosol forcing problem. However, the relatively small spread in these results suggests that the uncertainty in forcing arising from the treatment of radiative forcing of a well-characterized aerosol at well-specified surface albedo is smaller than some of the other sources of uncertainty in estimates of direct forcing by anthropogenic sulfate aerosols and anthropogenic aerosols generally.

Boucher, O.↗
NASA NTRS2007

Measurement of Carbon Dioxide Column via Space Borne Laser Absorption

In order to better understand the budget of carbon dioxide in the Earth's atmosphere it is necessary to develop a global high precision understanding of the carbon dioxide column. In order to uncover the 'missing sink that is responsible for the large discrepancies in the budget as we presently understand it calculation has indicated that measurement accuracy on the order of 1 ppm is necessary. Because typical column average CO2 has now reached 380 ppm this represents a precision on the order of .25% for these column measurements. No species has ever been measured from space at such a precision. In recognition of the importance of understanding the CO2 budget in order to evaluate its impact on global warming the National Research Council in its decadal survey report to NASA recommended planning for a laser based total CO2 mapping mission in the near future. The extreme measurement accuracy requirements on this mission places very strong requirements on the laser system used for the measurement. This work presents an analysis of the characteristics necessary in a laser system used to make this measurement. Consideration is given to the temperature dependence, pressure broadening, and pressure shift of the CO2 lines themselves and how these impact the laser system characteristics Several systems for meeting these requirements that are under investigation at various institutions in the US as well as Europe will be discussed.

Heaps, WIlliam S.↗
NASA NTRS2010

Progress in Measurement of Carbon Dioxide Using a Broadband Lidar

In order to better understand the budget of carbon dioxide in the Earth's atmosphere it is necessary to develop a global high precision understanding of the carbon dioxide column. In order to uncover the 'missing sink" that is responsible for the large discrepancies in the budget as we presently understand it calculation has indicated that measurement accuracy on the order of 1 ppm is necessary. Because typical column average CO2 has now reached 380 ppm this represents a precision on the order of .25% for these column measurements. No species has ever been measured from space at such a precision. In recognition of the importance of understanding the CO2 budget in order to evaluate its impact on global warming the National Research Council in its decadal survey report to NASA recommended planning for a laser based total CO2 mapping mission in the near future. The extreme measurement accuracy requirements on this mission places very strong requirements on the laser system used for the measurement. This work presents an overview of the characteristics necessary in a laser system used to make this measurement. Consideration is given to the temperature dependence, pressure broadening, and pressure shift of the CO2 lines themselves and how these impact the laser system characteristics We have been examining the possibility of making precise measurements of atmospheric carbon dioxide using broad band source of radiation. This means that many of the difficulties in wavelength control can be treated in the detector portion of the system rather than the laser source. It also greatly reduces the number of individual lasers required to make a measurement. Simplifications such as these are extremely desirable for systems designed to operate from space.

Heaps, William S.↗
DOE OSTI2025

A Flang Plugin for Fortran Feature Characterization

As new compute systems are developed, there is still a need to compile and execute codes authored in Fortran on these leading edge systems. In order to achieve this, development of compilers that support the latest hardware is continuously under development. Though the specification of Fortran is extensive, it is helpful to compiler authors to be able to prioritize the development of key features in order to get certain codes deemed important, e.g., applications of interest to leadership computing facilities, executable on leading edge compute systems. Identifying key features though is largely done through querying software experts or users of the Fortran applications of interest, who then manually report what features are and are not present. This exercise can both time consuming and error prone. To automate this process, we present a compiler plugin to Flang, the Fortran frontend for LLVM. This plugin is a tool that operates on the parse tree representation generated by Flang and detects key features based on walking parse tree nodes that correspond to features of interest. We show the result of our tool on four applications, three of which were manually profiled by software experts. We show the discrepancies between our tool and the manual characterization of the three applications, as well as generate a characterization for an application not yet profiled. We intend to open-source our tool in order to invite the community to benefit from the tool and make contributions for other features.

Cabrera, Anthony [ORNL]↗
NASA NTRS2000

Optical Characterization of Bulk ZnSeTe Solid Solutions

Optical characterization was performed on wafers sliced from crystals of ZnSe, ZnTe, and ZnSe(1-x)Te(x)(0 less than x less than 0.4) grown by physical vapor transport. Energy band gaps at room temperature were determined from optical transmission measurements on 11 wafers. A best fit curve to the band gap versus composition x data gives a bowing parameter of 1.45. This number lies between the value of 1.23 determined previously on ZnSeTe bulk crystals and the value of 1.621 reported on ZnSeTe epilayers. Low-temperature photoluminescence (PL) spectra were measured on six samples. The spectra of ZnSe and ZnTe were dominated by near band edge emissions and no deep donor-acceptor pairs were observed. The PL spectrum exhibited a broad emission for each of the ZnSe(1-x)Te(x) samples, 0.09 less than x less than 0.39. For x=0.09, this emission energy is about 0.2 eV lower than the band gap energy measured at low temperature. As x increases the energy discrepancy gradually decreases and reduces to almost zero at x=0.4. The single broad PL emission spectra and the spectra measured as a function of temperature were interpreted as being associated with the exciton bound to Te clusters because of the high Te content in these samples.

Su, Ching-Hua↗
NASA NTRS1988

Wide binary stars at the Galactic poles

Results are reported from a search for high-Galactic-latitude wide binaries down to visual magnitude 14 on five digitized Schmidt-telescope plates. The data-reduction and analysis techniques are described in detail, and the results are presented in graphs and briefly characterized. The number of wide binaries and the estimated wide-binary number density are both three times smaller than those found by Bahcall and Soneira (1981), but still too large to be consistent with the predictions of physical models. Possible explanations for this discrepancy are explored.

Garnavich, Peter M.↗
NASA NTRS1991

Molecular gas in luminous infrared galaxies

Radio observations of 60 bright IRAS galaxies with redshifts of 1500-25,000 km/sec are reported. Data obtained in the 1-0 line of CO using the 12-m NRAO radio telescope during 1985-1988 are presented in extensive tables, graphs, and line profiles and analyzed along with similar data on 29 less distant IRAS bright galaxies (Tinney et al., 1990). The galaxies are found to have H2 masses of (1-60) x 10 to the 9th solar mass and a mean ratio of H2 to warm dust of 540 + or - 290, corresponding to a total gas/dust ratio of 900-1100. The discrepancy between this value and that for the Galaxy (about 150) is tentatively attributed to the presence of undetected cold dust or errors in interpreting the IR data. The mechanisms which might be responsible for the high ratios of IR luminosity to H2 mass (2-220 solar luminosity per solar mass) are discussed.

Sanders, D. B.↗
NASA NTRS2015

Code-to-Code Comparison, and Material Response Modeling of Stardust and MSL using PATO and FIAT

This report provides a code-to-code comparison between PATO, a recently developed high fidelity material response code, and FIAT, NASA's legacy code for ablation response modeling. The goal is to demonstrates that FIAT and PATO generate the same results when using the same models. Test cases of increasing complexity are used, from both arc-jet testing and flight experiment. When using the exact same physical models, material properties and boundary conditions, the two codes give results that are within 2% of errors. The minor discrepancy is attributed to the inclusion of the gas phase heat capacity (cp) in the energy equation in PATO, and not in FIAT.

ablative materials↗
DOE OSTI2024

2D kinetic-ion simulations of inverted corona fusion targets

Laser-driven “inverted corona” fusion targets have attracted interest as a low-convergence neutron source and platform for studying kinetic physics. The scheme consists of a hollow or gas-filled spherical shell made of deuterated plastic. The shell has one or more laser entrance holes (LEH), resembling a spherical hohlraum. The laser passes through the LEH’s and illuminates the interior surface of the shell, ablating a plasma that travels inward towards the target center. Long ion mean free paths in the converging plasma can lead to significant interpenetration, atomic mix, and other kinetic effects. Here, in this work we report on numerical simulations of inverted corona targets using the kinetic-ion, fluid–electron hybrid particle-in-cell (PIC) approach in 2D RZ geometry. 2D simulations suggest that shape effects do not have a significant impact on plasma evolution and observed yield trends are primarily the result of 1D kinetic mix mechanisms. Simulations are also compared against available experimental data recorded at the OMEGA laser facility. In particular, synthetic x-ray emission images show good qualitative agreement with experimental results, albeit with an apparent timing discrepancy for the two-sided vacuum target. More generally, we demonstrate the potential of hybrid-PIC simulations for full-system modeling and experimental design, including collisional absorption of laser energy, plasma evolution, mix, and fusion burn.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1986

Investigation of non-linear contact for a clearance-fit bolt in a graphite/epoxy laminate

Numerous analytical studies have been published for the nonlinear load-contact variations in clearance-fit bolted joints. In these studies, stress distributions have been obtained and failure predictions have been made. However, very little experimental work has been reported regarding the contact or the stresses. This paper describes a fiber-optic technique for measuring the angle of contact in a clearance-fit bolt-loaded hole. Measurements of the contact angle have been made in a quasi-isotropic graphite-epoxy laminate by the optical as well as an electrical technique, and the results have been compared with those obtained from a finite-element analysis. The results from the two experimental techniques show excellent agreement; the finite-element results show some discrepancy, probably due to the interfacial frictions.

Prabhakaran, R.↗
NASA NTRS1992

Workshop report - A validation study of Navier-Stokes codes for transverse injection into a Mach 2 flow

A CFD (Computational Fluid Dynamics) competition was held at the Third Scramjet Combustor Modeling Workshop to assess the current state-of-the-art in CFD codes for the analysis of scramjet combustors. Solutions from six three-dimensional Navier-Stokes codes were compared for the case of staged injection of air behind a step into a Mach 2 flow. This case was investigated experimentally at the University of Virginia and extensive in-stream data was obtained. Code-to-code comparisons have been made with regard to both accuracy and efficiency. The turbulence models employed in the solutions are believed to be a major source of discrepancy between the six solutions.

Eklund, Dean R.↗
NASA NTRS2000

Optical Characterization of Bulk ZnSeTe Solid Solutions

Optical characterization was performed on wafers sliced from crystals of ZnSe, ZnTe and ZnSe (sub 1-x) Te (sub x) (0 less than x less than 0.4) grown by physical vapor transport technique. The energy band gaps at room temperature were determined from optical transmission measurements on 11 wafers. The best fit to the band gap vs. composition, x, data gives a bowing parameter of 1.336 which is between the value of 1.23 determined previously on ZnSeTe bulk crystals by reflectivity and the value of 1.621 reported on epilayers by photoconductivity. Low-temperature photoluminescence (PL) spectra were measured on 6 samples. The spectra of ZnSe and ZnTe were dominated by near band edge emissions and no deep donor-acceptor pairs were observed. The PL spectrum exhibited a broad emission for each of the ZnSe (sub 1-x) Te (sub x) samples, 0.09 less than x less than 0.39. For x = 0.09, this emission energy is about 0.2eV lower than the band gap energy measured at low temperature. As x increases the energy discrepancy gradually decreases and reduces to almost zero at x = 0.4. The single broad PL emission spectra and the spectra measured as a function of temperature were interpreted to be associated with the exciton bound to Te clusters because of the high Te content in these samples.

Su, Ching-Hua↗
NASA NTRS1986

Ab initio molecular orbital studies of low-energy, metastable isomers of the ubiquitous cyclopropenylidene

The discovery of cyclopropenylidene in space suggests that other C3H2 isomers may be present, and a tentative detection of one such isomer, propargylene (HCCCH), has been reported. Ab initio molecular orbital theory has been used to characterize five low-lying, metastable isomers of cyclopropenylidene. Extended calculations including the electron correlation energy, show that the lowest in energy is singlet propadienylidene, followed by propargylene; the singlet and triplet of the latter are too close in energy to allow an assignment of the ground state; triplet propadienylidene is at a significantly higher energy. Rotational frequencies computed to an expected accuracy of + or - 1 -2 percent do not confirm the tentative detection of propargylene in space, although the discrepancy between theory and the observation is not so great as to unequivocally rule out this possibility.

Defrees, D. J.↗
NASA NTRS2012

Decadal Trends in Abundance, Size and Condition of Antarctic Toothfish in McMurdo Sound, Antarctica, 1972-2010

We report analyses of a dataset spanning 38 years of near-annual fishing for Antarctic toothfish Dissostichus mawsoni, using a vertical setline through the fast ice of McMurdo Sound, Antarctica, 1972-2010. This constitutes one of the longest biological time series in the Southern Ocean, and certainly the longest for any fish. Fish total length, condition and catch per unit effort (CPUE) were derived from the more than 5500 fish caught. Contrary to expectation, length-frequency was dominated by fish in the upper half of the industrial catch. The discrepancy may be due to biases in the sampling capabilities of vertical (this study) versus benthic (horizontal) fishing gear (industry long lines), related to the fact that only large Antarctic toothfish (more than 100 cm TL) are neutrally buoyant and occur in the water column. Fish length and condition increased from the early 1970s to the early 1990s and then decreased, related to sea ice cover, with lags of 8 months to 5 years, and may ultimately be related to the fishery (which targets large fish) and changes in the Southern Annular Mode through effects on toothfish main prey, Antarctic silverfish Pleuragramma antarcticum. CPUE was constant through 2001 and then decreased dramatically, likely related to the industrial fishery, which began in 1996 and which concentrates effort over the Ross Sea slope, where tagged McMurdo fish have been found. Due to limited prey choices and, therefore, close coupling among mesopredators of the Ross Sea, Antarctic toothfish included, the fishery may be altering the trophic structure of the Ross Sea.

Ainley, David G.↗
NASA NTRS1985

Application of a computable model of human spatial vision to phase discrimination

A computable model of human spatial vision is used to make predictions for phase-discrimination experiments. This model is being developed to deal with a broad range of problems in vision and was not specifically formulated to deal with phase discrimination. In the model, cross-correlation of the stimuli with an array of sensors produces feature vectors that are operated on by a position-uncertain ideal observer to simulate detection and discrimination experiments. In this report, the stimuli are compound sinusoidal gratings composed of a fundamental and a higher-frequency component added in various phases. Model predictions are compared with three key results from the literature: (1) the effect of the contrast of the fundamental on phase discrimination, (2) threshold phase difference as a function of the fundamental frequency, and (3) the contrast required for phase discrimination as a function of the frequency ratio of the two grating components. In the first two cases, the predictions capture the main features of the data, although quantitative discrepancies remain. In the third case, the model fails, and this failure suggests additional restrictions on the combination of information across sensors.

Nielsen, K. R. K.↗
NASA NTRS1981

Comparisons of some large scientific computers

In 1975, the National Aeronautics and Space Administration (NASA) began studies to assess the technical and economic feasibility of developing a computer having sustained computational speed of one billion floating point operations per second and a working memory of at least 240 million words. Such a powerful computer would allow computational aerodynamics to play a major role in aeronautical design and advanced fluid dynamics research. Based on favorable results from these studies, NASA proceeded with developmental plans. The computer was named the Numerical Aerodynamic Simulator (NAS). To help insure that the estimated cost, schedule, and technical scope were realistic, a brief study was made of past large scientific computers. Large discrepancies between inception and operation in scope, cost, or schedule were studied so that they could be minimized with NASA's proposed new compter. The main computers studied were the ILLIAC IV, STAR 100, Parallel Element Processor Ensemble (PEPE), and Shuttle Mission Simulator (SMS) computer. Comparison data on memory and speed were also obtained on the IBM 650, 704, 7090, 360-50, 360-67, 360-91, and 370-195; the CDC 6400, 6600, 7600, CYBER 203, and CYBER 205; CRAY 1; and the Advanced Scientific Computer (ASC). A few lessons learned conclude the report.

Credeur, K. R.↗
NASA NTRS2020

The bioclimatic extent and pattern of the cold edge of the boreal forest: the circumpolar taiga-tundra ecotone

Current configurations of forest structure at the cold edge of the boreal may help understand the future of ecosystem functioning in high northern latitudes. The circumpolar biome boundary at the boreal (taiga) forest and tundra interface is an ecological transition zone (taiga-tundra ecotone; TTE) experiencing changes that affect its forest structure. We accounted for the TTE's horizontal forest structure with an estimate of its extent and pattern as represented by tree canopy cover (TCC). We quantified TCC patterns with an algorithm that describes its spatial gradient, and summarized landscape patterns of structure to represent heterogeneity, capturing abrupt, diffuse, and uniform forest at mesoscales. We used these landscape patterns to constrain the spatial extent of sparse and open canopy forest, and non-forest (forest-adjacent) edge that defines the TTE extent. The resulting map of the TTE extent is based on forest structure spatial patterns resolved at 30 m, highlights structural variability across landscapes, and helps distinguish tundra from boreal domains. We classified 14 594 landscapes as those associated with the TTE within a circumpolar bioclimatic envelope (11.575 million km2), where 44.83% of the area of these landscapes were forest and non-forest edge, yet 36.43% contributed to the TTE extent. We report the overall extent of the TTE (3.032 million km2) across North America and Greenland (53%), and Eurasia (47%), where 0.697 million km2 is non-forest edge, 0.549 million km2 is sparse forest, and 1.787 million km2 is open canopy forest. Diffuse forest landscapes dominate the TTE (79%), and abrupt landscapes (~19%) indicate portions of the TTE where sparse forest and non-forest edge are the prevailing structural patterns. This account of the TTE quantifies the area of the cold edge of the boreal forest where previous global estimates show high discrepancies, and can help target monitoring and prediction of circumpolar dynamics.

Paul M Montesano↗
DOE OSTI2025

Diversion Path Analysis: A Proposed Methodology to Develop an MC&A Approach for Liquid-Fueled Molten Salt Reactors

Nuclear material control and accounting (MC&A) is a critical element of both the US Nuclear Regulatory Commission (NRC) and US Department of Energy (DOE)’s domestic safeguards and security requirements. NRC licensees are required, under Title 10 of the Code of Federal Regulations (10 CFR) Part 74 to establish and maintain an MC&A program that captures and records the quantities and locations of special nuclear material (SNM) at the facility. Along with physical protection, MC&A is a key element of domestic nuclear material safeguards that enables the NRC to ensure that SNM is controlled and accounted for. SNM, per 10 CFR Part 74, refers to plutonium, 233 U, and uranium enriched in the isotope 233 U or 235 U, but does not include source material. Periodic physical inventories, coupled with material balance evaluations, are effective and demonstrated tools to account for and detect theft or diversion of SNM in facilities containing SNM in bulk material form (i.e., not in discrete, countable items). Historically in the United States, these types of facilities have included fuel fabrication, conversion, and enrichment facilities. In comparison, reactors have relied on item counting of assemblies and control of SNM while in containment (e.g., a sealed reactor pressure vessel) because, to date, reactor fuel has been in item form. In liquid-fueled molten salt reactors (MSRs), unlike traditional light water reactors (LWRs) or bulk facilities, bulk SNM quantities can change significantly during operation as a result of depletion and transmutation. This introduces challenges to the use of traditional periodic physical inventories and material balance evaluations to detect theft or diversion of SNM in reactors that use SNM in bulk material form. Liquid-fueled (i.e., salt-fueled) MSR facilities are MSRs that use SNM within a salt eutectic as the fuel. The SNM is in a bulk material form any time it is outside of fresh or spent fuel storage containers. Some examples of when SNM will be in bulk form in the facility are during addition of fuel to the reactor system, while fuel is circulating in operation, and while fuel is in a drain tank. Periodic physical inventories and material balance evaluations can likely be effectively applied to many portions of an MSR facility, including all areas where depletion and transmutation are not significantly changing the quantities of SNM within the control area. Within an MSR facility, this would include fresh fuel receipt and loading, waste streams that may contain SNM, irradiated fuel storage outside of the reactor core, and any irradiated fuel processing that may happen after SNM has been removed from the reactor. All of these process steps could rely on measurements of SNM quantities compared with documented inventories. Any discrepancies from predicted (i.e., book) inventories and measured inventories could be quantified as inventory differences, consistent with traditional MC&A guidance from the NRC (e.g., in NUREG-1065 Revision 2, NUREG-2159 Revision 1, and RG 5.29 Revision 2). Within the reactor system, additions and removals to the book inventory include depletion of the SNM (e.g., fission of 235 U), which complicates the use of physical inventories. SNM control, however, can also likely be effectively applied to detect theft of SNM throughout a liquid-fueled MSR facility. To complement these approaches, prior technical reports have identified that a diversion path analysis may be a useful, risk-informed, and performance-based tool to determine suitable elements of an MC&A approach for the reactor system within a liquid-fueled MSR facility.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗