Search NASA⌕ Search

SEARCH · Search NASA

Results for “error indicators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Application of manual control theory to the study of biological stress

A study was run using both a stable, third-order task and an adaptive first-order unstable task singly and in combination to test the effects of 2 min hypoxia (22000 ft) on human operator. The results indicate that the RMS error in the stable task does not change as a function of hypoxic stress whereas the error in an unstable task changes significantly. Models involving human operator parameter changes and noise injection are discussed.

Replogle, C. R.↗

A very high speed hard decision sequential decoder.

Description of a 40-Mbps hard-decision sequential decoder for high-data-rate coding systems for earth-orbiting space missions with power-limited links. A prototype decoder has been designed and fabricated using the fastest commercially available digital integrated circuits, MECL III. Thus far, an internal computational rate of 70 million computations per second has been achieved. Computational efficiency of the decoding algorithm was greatly improved by incorporating two modifications to the Fano algorithm - 'double quick threshold loosening' and 'diagonal steps.' Preliminary results indicate that an output error rate of 0.00001 can be achieved with E sub b/N sub zero less than 5.4 dB at data rates up to 40 Mbps. At lower data rates, even less signal energy is required. This decoder is believed to be at least five times faster than any previous sequential decoder.

Gilhousen, K. S.↗

Average correlation functions in on-line testing of linear systems

This paper is a report on new methods for on-line testing of single-input/single-output linear and time-invariant systems. No interruption of system operation is necessary, since the signals used in this test procedure are the normal operating signals. Test results indicate that detectable system errors using finite amounts of data are well within tolerance for normal operation in all but the most stringent applications.

Mix, D. F.↗

Ionosphere/microwave beam interaction study

The microwave beam of the Solar Power Satellite (SPS) is predicted to interact with the ionosphere producing thermal runaway up to an altitude of about 100 kilometers at a power density threshold of 12 mW/cm sq (within a factor of two). The operation of the SPS at two frequencies, 2450 and 5800 MHz, is compared. The ionosphere interaction is less at the higher frequency, but the tropospheric problem scattering from heavy rain and hail is worse at the higher frequency. Microwave signals from communication satellites were observed to scintillate, but there is some concern that the uplink pilot signal may be distorted by the SPS heated ionosphere. The microwave scintillations are only observed in the tropics in the early evenings near the equinoxes. Results indicate that large phase errors in the uplink pilot signal can be reduced.

Gordon, W. E.↗

The forward scattering of microwave solar radiation from a water surface

The forward scattering of microwave solar radiation from both smooth and rough water surfaces is computed. The smooth surface is assumed specular, and the rough surface is represented by a two-scale surface, for which two small-scale perturbation parameters, 0.10 and 0.25, are considered. The contribution of the scattered sunlight to the antenna temperature is found using the scalar approximation, and the results are compared with radiometer measurements. The overall agreement is good, but in some cases the smooth-surface measurements are higher than the computations. This discrepancy possibly indicates an absolute calibration error or a slight misalignment of the antennas' boresights. The computations for the two perturbation parameters bracket the rough-surface measurements except when the sun's mirror image is far removed from the boresight direction. The small disagreement in this case may be due to a peaked large-scale slope distribution.

Wentz, F. J.↗

The dwarf spheroidal galaxy in Draco. I - New BV photometry. II - Galactic foreground reddening

BV photoelectric photometry for 39 stars and BV photographic photometry for 514 stars in the field of the Draco dwarf spheroidal galaxy are presented. The color-magnitude diagram for 512 of these field stars is found to display a well-defined red horizontal branch as well as a red giant branch whose observed width is comparable to the accidental photometric error. The results also indicate that a more diffuse sequence of stars lies about 0.1 mag to the blue of the giant branch and that an upper horizontal branch of more massive core helium-burning stars may also be present. The foreground reddening toward Draco is then determined by narrow-band uvby-beta photometry of galactic B-A-F stars.

Stetson, P. B.↗

A study of partial coherence for identifying interior noise sources and paths on general aviation aircraft

The partial coherence analysis method for noise source/path determination is summarized and the application to a two input, single output system with coherence between the inputs is illustrated. The augmentation of the calculations on a digital computer interfaced with a two channel, real time analyzer is also discussed. The results indicate possible sources of error in the computations and suggest procedures for avoiding these errors.

Howlett, J. T.↗

Multi-image photometric solutions for the Galilean satellites

A method for determining the limb darkening planet, acquired in the same wavelength range (lambda), within a few degrees of the same phase angle (alpha), but acquired at different illumination and viewing conditions. The two images are first geometrically registered in simple cylindrical format. A limb darkening factor is computed for each pixel pair and output as a digital image. Systematic trends with photometric coordinates across this image indicate either a calibration error or inappropriateness of the particular photometric function. This method can be used for any photometric function with a single limb darkening factor, such as the Minnaert function or the function which combines the Lommel-Seeliger and Lambert functions. By solving for many pairs of images, the limb darkening factor as a function of alpha and lambda may be determined. The two image limb darkening solutions determined for 1 Voyager image pair on Ganymede, 16 image pairs on Callisto, 44 pairs on Europa, and 19 pairs on Io are discussed.

Mcewen, A. S.↗

A model study of the effects of intermittent loss on odd nitrogen concentrations in the lower troposphere

A time-dependent box model of the lower troposphere which includes a description of photochemical and physical processes has been developed. This model has been applied to the calculation of nitric acid and NO(x)(NO + NO2) concentrations over a diurnal cycle which includes precipitation. Nitric acid concentrations and the HNO3/NO(x) ratio are found to be highly variable under the assumptions regarding the frequency, duration, and intensity of precipitation employed in this model. The chemistry of odd nitrogen compounds during the night is potentially important in establishing the level of nitric acid in the lower troposphere. These calculations also indicate that relatively large errors may occur when the continuity equation describing nitric acid variations is averaged over a diurnal cycle which includes precipitation. Interpretation of simultaneous measurements of HNO3 and NO(x) will require some knowledge of the history of the observed air mass and may require an improved understanding of nighttime odd nitrogen chemistry.

Stewart, R. W.↗

Numerical Experimentation with Maximum Likelihood Identification in Static Distributed Systems

Many important issues in the control of large space structures are intimately related to the fundamental problem of parameter identification. One might also ask how well this identification process can be carried out in the presence of noisy data since no sensor system is perfect. With these considerations in mind the algorithms herein are designed to treat both the case of uncertainties in the modeling and uncertainties in the data. The analytical aspects of maximum likelihood identification are considered in some detail in another paper. The questions relevant to the implementation of these schemes are dealt with, particularly as they apply to models of large space structures. The emphasis is on the influence of the infinite dimensional character of the problem on finite dimensional implementations of the algorithms. Those areas of current and future analysis are highlighted which indicate the interplay between error analysis and possible truncations of the state and parameter spaces.

Scheid, R. E., Jr.↗

Verification of static rotor-load measurement capabilities of the RSRA helicopter active-isolator system

The Rotor Systems Research Aircraft helicopter technology demonstration test bed incorporates an active isolator system which reduces the rotor vibrations that are transmitted to the airframe and allows the simultaneous measurement of all six forces and moments generated by the rotor. The first full system calibration was performed in 1983 to verify the system's static load measurement capabilities; the analysis of the data encompassed multiple linear regressions to determine calibration matrices for different data sets, and a hysteresis removal algorithm for the estimation of in-flight measurement errors. The results obtained indicate that the active isolator system meets most performance predictions.

Acree, C. W., Jr.↗

Magellan spacecraft - Attitude determination, updates and gyro parameter calibration

A detailed mathematical algorithm for onboard autonomous attitude determination and parameter calibration in the Magellan Venus-orbiting spacecraft has been developed, and its performance has been estimated. This algorithm uses a contamination reduction attitude profile and retractive star scan maneuvers to minimize the interparameter error contamination and to maximize the parameter observability. The details of the underlying theory and strategy are described, and an extensive performance analysis with worst-case parameter errors is reported which indicates that the in-flight attitude determination unit/parameter calibration (ADU/PC) algorithm will be able to meet all the different mission phase requirements with comfortable margins. The problem of nonexact mapping retrace due to uncertain performance of control authority is addressed, and its lack of impact on the system performance is demonstrated.

Huang, W. H.↗

Gravity mismodelling on TOPEX orbit determination

Gravity mismodeling limits the dynamic orbit determination accuracy of TOPEX which requires an altitude accuracy of about 15 cm or better. This paper provides an assessment of this effect for a dynamic GPS tracking scheme, and investigates a nondynamic GPS tracking technique that eliminates the problem. Analysis indicates that TOPEX altitude error could be affected by as much as 30-40 cm when dynamic differential GPS tracking is used, although efforts now underway to improve the gravity model could reduce this. With the nondynamic technique, the positional change of TOPEX is inferred from the accurate, continuous GPS carrier phase measurements rather than from a dynamic model which is prone to gravity error. TOPEX altitude accuracy better than 15 cm is attainable with nondynamic tracking over a few hours.

Wu, S.-C.↗

Results from the Balloon Ozone Intercomparison Campaign (BOIC)

In the Balloon Ozone Intercomparison Campaign (BOIC), several in situ UV absorption photometers, two solar UV absorption photometers, electrochemical sondes, and a mass spectrometer were intercompared in three flight missions. Concurrent data from Umkehr and satellite observations are also intercompared. The National Bureau of Standards provided a 'standard' ozone source for intercomparing the in situ instruments and ground pressure. Preliminary findings indicate that the standard deviation of the sensitivities among 17 instruments against the NBS reference was about 11 percent. These differences appear in flight at the lower levels and change at higher altitudes, indicating height-dependent errors. The difference among five in-situ UV photometers flown together ranged by plus or minus 8 percent during ascent to about 41 km. During float at 42 km, the difference nearly doubled. During descent, the difference decreased to about 4 percent, which is much closer to the expected accuracy of these instruments. Results from UV solar radiometers have been systematically higher than those from UV photometers by 15 to 20 percent - a very important disagreement that needs to be resolved.

Hilsenrath, E.↗

Automatically generated acceptance test: A software reliability experiment

This study presents results of a software reliability experiment investigating the feasibility of a new error detection method. The method can be used as an acceptance test and is solely based on empirical data about the behavior of internal states of a program. The experimental design uses the existing environment of a multi-version experiment previously conducted at the NASA Langley Research Center, in which the launch interceptor problem is used as a model. This allows the controlled experimental investigation of versions with well-known single and multiple faults, and the availability of an oracle permits the determination of the error detection performance of the test. Fault interaction phenomena are observed that have an amplifying effect on the number of error occurrences. Preliminary results indicate that all faults examined so far are detected by the acceptance test. This shows promise for further investigations, and for the employment of this test method on other applications.

Protzel, Peter W.↗

Simulated measurement of power flow in structures near to simple sources and simple boundaries

Advances in electronics technology along with the advent of low cost multichannel Fast Fourier analyzers have made it practical to use higher order central difference formulas to measure power flow in 1- and 2-D structures. The method discussed uses five point differencing for the spatial derivatives in 1-D and a thirteen point difference pattern for the spatial derivatives in 2-D plates and shells. It is assumed that the measuring transducers are accelerometers. An analytical study of the higher order differencing method and the conventional two accelerometer method was performed as a preliminary to the application of these methods to actual aircraft structures. Some classical problems were analyzed in order to simulate and compare the performance of the two methods under near field measurement conditions. These near field conditions include examples of power flows near simple sources and simple boundaries. The estimates produced by the two methods were compared to the exact solution in each example. Presented are the theory and selected results of the study, which indicate that the bias errors of the two accelerometer method under near field measurement conditions may be much larger than previous studies have suggested.

Mcgary, Michael C.↗

Fault injection based automatic testing - Practice and examples

This report addresses the problem of ascertaining the quantitative properties of dependable distributed systems. The approach is based on fault injection experimentation with two distinct real-time workloads using a fault-injection-based automated testing environment. Experimental results are presented which indicate dependability properties (e.g., error detection coverage, error latency) based on a limited number of fault injections.

Segall, Z.↗