Search NASA⌕ Search

SEARCH · Search NASA

Results for “molecular doping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Ferroelectric Switching in Hybrid Molecular-Beam-Epitaxy-Grown BaTiO 3 Films

Molecular beam epitaxy (MBE) is a promising synthesis technique for both heterostructure growth and epitaxial integration of ferroelectric BaTiO 3 . However, direct measurement of the remnant polarization (P r ) has not been previously reported in MBE-grown BaTiO 3 films. We report the in situ growth of an all-epitaxial SrRuO 3 /BaTiO 3 /SrRuO 3 heterostructure on Nb-doped SrTiO 3 (001) substrates by hybrid MBE using metal–organic precursors. This capacitor structure consisting of 16 nm SrRuO 3 /40 nm BaTiO 3 /16 nm SrRuO 3 shows hysteretic polarization–electric field (P–E) curves with P r ∼ 15 μC cm –2 at frequencies ranging from 500 Hz to 20 kHz, after isolating the intrinsic ferroelectric response from non-ferroelectric contributions using the Positive-Up-Negative-Down (PUND) method. We hypothesize that the asymmetry in switching behavior and current leakage has origins in structural defects. Furthermore, this work opens the door to defect-engineered ferroelectric BaTiO 3 -based heterostructures grown by hybrid MBE for future electronic, photonic and spintronic applications.

SrRuO3 electrode↗
DOE OSTI2021

Electronic and structural properties of single-crystal Jahn–Teller active Co 1+x Mn 2–x O 4 thin films

Recent investigations on spinel CoMn 2 O 4 have shown its potential for applications in water splitting and fuel cell technologies as it exhibits strong catalytic behavior through oxygen reduction reactivity. To further understand this material, we report for the first time the synthesis of single-crystalline Co 1+x Mn 2-x O 4 thin films using molecular beam epitaxy. By varying sample composition, we establish links between cation stoichiometry and material properties using in-situ x-ray photoelectron spectroscopy, x-ray diffraction, scanning transmission electron microscopy, x-ray absorption spectroscopy, and spectroscopic ellipsometry. Our results indicate that excess Co ions occupy interstitial tetrahedral sites up to a certain stoichiometry, then are substitutional for octahedrally-coordinated Mn beyond this threshold. Here, we compare these results with density functional theory models of stoichiometric CoMn 2 O 4 to understand how the Jahn-Teller distortion and hybridization in Mn-O bonds impact the ability to hole dope the material with excess Co. The findings provide important insights into CoMn 2 O 4 and related spinel oxides for future application as inexpensive oxygen reduction reaction catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Morphology and Transport of Multivalent Cation-Exchanged Ionomer Membranes Using Perfluorosulfonic Acid–Ce Z+ as a Model System

Perfluorosulfonic acids (PFSAs) are commonly used as solid polymer electrolyte membranes (PEMs) in electrochemical energy devices, where they are vulnerable to attack by radical species during operation. A popular strategy to combat this problem is to introduce radical scavengers like cerium (Ce) ions that neutralize these species before they attack the PFSA. Such cation doping creates a multi-ion system, in which understanding the mechanisms of cation solvation and transport becomes important for the effective design and utilization of PFSA–cation systems. Ce ions also provide a representative model system for multication-exchanged ionomers in electrochemical systems. In this study, hydration and conductivity measurements, along with X-ray fluorescence and scattering, are employed to elucidate how Ce ion exchange alters PFSA’s ionic solvation, as well as nano- and mesoscale morphologies, which ultimately control its ion transport properties. A molecular transport model is used to deconvolute the impact of Ce ions on the local solvation structure of water in the membrane from mesoscale changes of the transport pathways. The combined experimental and theoretical analysis reveals a nonlinear decrease in conductivity driven by cation solvation at the molecular level and morphological changes at longer length scales. Migration–diffusion coupling, its nonlinear dependence on ion exchange and hydration, and its overall implications for ionomer performance are also discussed. Finally, these findings have the potential to be translated into other mixed cation–ionomer systems for a wide range of energy and environmental devices.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Epitaxial Growth of Ga2O3: A Review

Beta-phase gallium oxide (β-Ga2O3) is a cutting-edge ultrawide bandgap (UWBG) semiconductor, featuring a bandgap energy of around 4.8 eV and a highly critical electric field strength of about 8 MV/cm. These properties make it highly suitable for next-generation power electronics and deep ultraviolet optoelectronics. Key advantages of β-Ga2O3 include the availability of large-size single-crystal bulk native substrates produced from melt and the precise control of n-type doping during both bulk growth and thin-film epitaxy. A comprehensive understanding of the fundamental growth processes, control parameters, and underlying mechanisms is essential to enable scalable manufacturing of high-performance epitaxial structures. This review highlights recent advancements in the epitaxial growth of β-Ga2O3 through various techniques, including Molecular Beam Epitaxy (MBE), Metal-Organic Chemical Vapor Deposition (MOCVD), Hydride Vapor Phase Epitaxy (HVPE), Mist Chemical Vapor Deposition (Mist CVD), Pulsed Laser Deposition (PLD), and Low-Pressure Chemical Vapor Deposition (LPCVD). This review concentrates on the progress of Ga2O3 growth in achieving high growth rates, low defect densities, excellent crystalline quality, and high carrier mobilities through different approaches. It aims to advance the development of device-grade epitaxial Ga2O3 thin films and serves as a crucial resource for researchers and engineers focused on UWBG semiconductors and the future of power electronics.

Chemistry↗
DOE OSTI2022

Investigation of Molecular Diffusion at Block Copolymer Thin Films Using Maximum Entropy Method-Based Fluorescence Correlation Spectroscopy and Single Molecule Tracking

Fluorescence correlation spectroscopy (FCS) has been widely used to investigate molecular diffusion behavior in various samples. The use of the maximum entropy method (MEM) for FCS data analysis provides a unique means to determine multiple distinct diffusion coefficients without a priori assumption of their number. Comparison of the MEM-based FCS method (MEM-FCS) with another method will reveal its utility and advantage as an analytical tool to investigate diffusion dynamics. Herein, we measured diffusion of fluorescent probes doped into nanostructured thin films using MEM-FCS, and validated the results with single molecule tracking (SMT) data. The efficacy of the MEM code employed was first demonstrated by analyzing simulated FCS data for systems incorporating one and two diffusion modes with broadly distributed diffusion coefficients. The MEM analysis accurately afforded the number of distinct diffusion modes and their mean diffusion coefficients. These results contrasted with those obtained by fitting the simulated data to conventional two-component and anomalous diffusion models, which yielded inaccurate estimates of the diffusion coefficients. Subsequently, the MEM analysis was applied to FCS data acquired from hydrophilic dye molecules incorporated into microphase-separated polystyrene-block-poly(ethylene oxide) (PS-b-PEO) thin films characterized under a water-saturated nitrogen atmosphere. The MEM analysis revealed distinct fast and slow diffusion components attributable to molecules diffusing on the film surface and inside the film, respectively. SMT studies of the same materials yielded trajectories for mobile molecules that appear to follow the curved PEO microdomains. Diffusion coefficients obtained from the SMT data were consistent with those obtained for the slow diffusion component detected by MEM-FCS. Furthermore, these results highlight the utility of MEM-FCS and SMT for gaining complementary information on molecular diffusion processes in heterogeneous material systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Non-covalent planarizing interactions yield highly ordered and thermotropic liquid crystalline conjugated polymers

Controlling the multi-level assembly and morphological properties of conjugated polymers through structural manipulation has contributed significantly to the advancement of organic electronics. In this work, a redox active conjugated polymer, TPT–TT, composed of alternating 1,4-(2-thienyl)-2,5-dialkoxyphenylene (TPT) and thienothiophene (TT) units is reported with non-covalent intramolecular S⋯O and S⋯H–C interactions that induce controlled main-chain planarity and solid-state order. As confirmed by density functional theory (DFT) calculations, these intramolecular interactions influence the main chain conformation, promoting backbone planarization, while still allowing dihedral rotations at higher kinetic energies (higher temperature), and give rise to temperature-dependent aggregation properties. Thermotropic liquid crystalline (LC) behavior is confirmed by cross-polarized optical microscopy (CPOM) and closely correlated with multiple thermal transitions observed by differential scanning calorimetry (DSC). This LC behavior allows us to develop and utilize a thermal annealing treatment that results in thin films with notable long-range order, as shown by grazing-incidence X-ray diffraction (GIXD). Specifically, we identified a first LC phase, ranging from 218 °C to 107 °C, as a nematic phase featuring preferential face-on π–π stacking and edge-on lamellar stacking exhibiting a large extent of disorder and broad orientation distribution. A second LC phase is observed from 107 °C to 48 °C, as a smectic A phase featuring sharp, highly ordered out-of-plane lamellar stacking features and sharp tilted backbone stacking peaks, while the structure of a third LC phase with a transition at 48 °C remains unclear, but resembles that of the solid state at ambient temperature. Furthermore, the significance of thermal annealing is evident in the ∼3-fold enhancement of the electrical conductivity of ferric tosylate-doped annealed films reaching 55 S cm −1 . More importantly, thermally annealed TPT–TT films exhibit both a narrow distribution of charge-carrier mobilities (1.4 ± 0.1) × 10 −2 cm 2 V −1 s −1 along with a remarkable device yield of 100% in an organic field-effect transistor (OFET) configuration. This molecular design approach to obtain highly ordered conjugated polymers in the solid state affords a deeper understanding of how intramolecular interactions and repeat-unit symmetry impact liquid crystallinity, solution aggregation, solution to solid-state transformation, solid-state morphology, and ultimately device applications.

Chemistry↗
DOE OSTI2023

Fundamentals of SrCoO 3-δ Based Oxygen Deficient Perovskites as Cathodes for Solid Oxide Fuel Cells

The local structure and oxygen stoichiometry in oxide systems have a profound impact on oxygen electrocatalysis encountered in metal-air batteries and solid oxide fuel cells (SOFCs). However, this knowledge is often obtained under conditions different from the real working conditions of the material, resulting in misinterpretation and misunderstanding. This PhD dissertation aims to obtain the structure and oxygen-stoichiometry information of a class of perovskite oxides under their real working conditions in solid oxide fuel cells. Several perovskite oxides were selected for the study: Sr 0.9 Y 0.1 CoO 3-δ (SYC10), Sr 0.9 Y 0.3 CoO 3-δ (SYC30), SrCo 0.9 Nb 0.1 O 3-δ (SCN10) and SrCo 0.9 Ta0.1O 3-δ (SCT10). The local crystal structure and oxygen stoichiometry of these materials were systematically characterized with in-situ neutron diffraction (ND). The oxygen stoichiometry was also measured by thermogravimetric analysis (TGA) and iodometric titration methods. To establish the correlation among structure, oxygen stoichiometry and oxygen reduction reaction (ORR) activity, high temperature electrochemical impedance spectroscopy, oxygen permeation and single cell testing were also performed. In chapter 2, SYC10 is described to have a more symmetrical structure and $V_o^{··}$ distribution, and higher $V_o^{··}$ concentration than SYC30. Molecular orbital energy analysis based on the local structure of the ORR-active Co1-polyhedra indicates SYC30 has a higher Fermi level relative to O-2p energy level in the active Co1-polyhedra, and thus a higher motional enthalpy for $V_o^{··}$ migration. However, the ORR activity of Y-doped SrCoO 3-δ (SCO) are found uncompetitive with other popular catalysts. In chapter 3 and 4, systematic structural studies are presented for Nb and Ta-doped SCO, namely SCN10 and SCT10, respectively. The methodology of unrevealing the structure-activity relationships in chapter 2 is also found applicable to SYC10, SCN10 and SCT10 as presented in chapter 5. The electrochemical tests indicate that SCT10 is the best catalyst due to its excellent thermal and electrochemical stability. In chapter 6, SCT10 is evaluated in a real solid oxide fuel cell in the form of nanoscaled SCT10 layer coating on the commercial (La 0.6 Sr 0.4 ) 0.95 Co 0.2 Fe 0.8 O 3-δ (LSCF). The bilayer structured cathode shows excellent properties of coarsening-resistant, Sr-segregation-free and high ORR-activity.

Yang, Tianrang↗
DOE OSTI2022

Environmental application of chlorine-doped graphitic carbon nitride: Continuous solar-driven photocatalytic production of hydrogen peroxide

Solar-driven photocatalytic generation of H 2 O 2 over metal-free catalysts is a sustainable approach for value-added chemical production. Here, we synthesized chlorine-doped graphitic carbon nitride (Cl-doped g-C 3 N 4 ) through a solvothermal method to effectively produce H 2 O 2 with a rate of 1.19 ± 0.06 µM min –1 under visible light irradiation, which was improved by 104 times compared to pristine g-C 3 N 4 . Continuous net production of H 2 O 2 was realized at a rate of 2.78 ± 0.10 µM min –1 up to 54 h with isopropanol as the hole scavenger, whereas H 2 O 2 production was only sustained for ~ 6 h without scavengers. Both molecular simulations and advanced spectroscopic characterizations elucidated that the Cl dopant increased the charge transfer rate, decreased the bandgap, and reduced the activation energy of the rate-limiting step of O 2 reduction, all of which favored H 2 O 2 production. Furthermore, this work implemented a novel metal-free photocatalyst for sustainable H 2 O 2 production and elucidated the mechanism for promoting H 2 O 2 production that can guide future photoreactive nanomaterial design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

High-performance piezoelectric composites via β phase programming

Polymer-ceramic piezoelectric composites, combining high piezoelectricity and mechanical flexibility, have attracted increasing interest in both academia and industry. However, their piezoelectric activity is largely limited by intrinsically low crystallinity and weak spontaneous polarization. Here, we propose a Ti 3 C 2 T x MXene anchoring method to manipulate the intermolecular interactions within the all-trans conformation of a polymer matrix. Employing phase-field simulation and molecular dynamics calculations, we show that OH surface terminations on the Ti 3 C 2 T x nanosheets offer hydrogen bonding with the fluoropolymer matrix, leading to dipole alignment and enhanced net spontaneous polarization of the polymer-ceramic composites. We then translated this interfacial bonding strategy into electrospinning to boost the piezoelectric response of samarium doped Pb (Mg1/3Nb 2/3 )O 3 -PbTiO 3 /polyvinylidene fluoride composite nanofibers by 160% via Ti 3 C 2 T x nanosheets inclusion. With excellent piezoelectric and mechanical attributes, the as-electrospun piezoelectric nanofibers can be easily integrated into the conventional shoe insoles to form a foot sensor network for all-around gait patterns monitoring, walking habits identification and Metatarsalgi prognosis. This work utilizes the interfacial coupling mechanism of intermolecular anchoring as a strategy to develop high-performance piezoelectric composites for wearable electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Molecular Modeling of Surfactant Interaction on Phospholipid Bilayers Mimicking Corneal Epithelium

Surfactants found in consumer products can compromise eye corneal membrane integrity upon accidental exposure. Traditional in vitro and in vivo approaches to evaluate membrane–surfactant interaction pose experimental limitations such as species variability, reproducibility, and most often do not provide the overall picture. These limitations motivate the use of in silico models to study phenomena like cellular disruption assays caused by surfactants at the molecular scale. In this work, coarse-grained molecular dynamics simulations have been employed to investigate how nonionic alcohol ethoxylate (AE) and anionic surfactant alcohol ethoxy sulfate (AES) interact with lipid bilayer liposomes that mimic corneal epithelial cell membranes. The spherical liposome is composed of 1,2-dihexadecanoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-di(9Z-octadecenoyl)-sn-glycero-3-phosphoethanolamine (DOPE), 1,2-di(9Z-octadecenoyl)-sn-glycero-3-phospho-l-serine (DOPS), and cholesterol, resembling the composition of the corneal epithelial cells’ membrane bilayer. The simulation consisted of varying degrees of representative surfactant compositions and two initial types of surfactant configurations within or outside the liposome. Our results reveal that both surfactants induce outer leaflet bulging, agreeing with membrane solubilization models. The more highly ethoxylated surfactant, AE, caused more consistent inner leaflet disruption than AES, resulting in significantly more water permeation and membrane thinning. In addition, both surfactants increase the lateral diffusion of lipids within the membrane layers, with higher ethoxylated AE showing a stronger effect than AES. This study demonstrates how surfactant structure and localization influence bilayer membrane integrity, offering mechanistic insights into the irritation potential, thus guiding the rational design of effective surfactant-based formulations.

Lipids↗
DOE OSTI2024

Atomic Electron Tomography of Thin Films

In the past decade, the development of atomic electron tomography (AET) [1] has allowed for the 3D characterization of atomic positions in nanoparticle [2], monolayer [3], and needle [4] geometries. Furthermore, many technologically important systems are synthesized and utilized as thin films. Several challenges in sample preparation and data analysis have been overcome to expand the scope of AET to these systems. Polycrystalline yttrium-doped hafnium dioxide (HfO 2 ) was chosen as a model system, because it is technologically relevant as a high capacitance dielectric and ferroelectric.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1990

High-power operation of highly reliable narrow stripe pseudomorphic single quantum well lasers emitting at 980 nm

Ridge waveguide pseudomorphic InGaAs/GaAs/AlGaAs single-quantum-well lasers exhibiting record high quantum efficiencies and high output power densities (105 mW per facet from a 6 micron wide stripe) at a lasing wavelength of 980 nm are discussed that were fabricated from a graded index separate confinement heterostructure grown by molecular beam epitaxy. Life testing at an output power of 30 mW per uncoated facet reveals a slow gradual degradation during the initial 500 h of operation after which the operating characteristics of the lasers become stable. The emission wavelength, the high output power, and the fundamental lateral mode operation render these lasers suitable for pumping Er3+-doped fiber amplifiers.

Larsson, A.↗
DOE OSTI2022

Mechanistic Insights on the Low-Temperature Oxidation of CO Catalyzed by Isolated Co Ions in N-Doped Carbon

Isolated cobalt ions on nitrogen-doped carbon (Co-N-C) catalyze CO oxidation at temperatures as low as 196 K, but the active site and mechanism for this reaction remain elusive. In this work, steady-state CO oxidation around 273 K over Co-N-C revealed nearly first order behavior in both CO and O 2 as well as a negative apparent activation energy. Isotopic transient analysis of the reaction confirmed a rapid turnover frequency and low surface coverage of adsorbed intermediates leading to CO 2 (< 10% of the Co). Results from kinetics experiments combined with quantum chemical calculations and molecular dynamics simulations are consistent with a reaction path involving weak adsorption of CO onto Co ions followed by a low barrier for the CO-assisted activation of weakly adsorbed O 2 . Furthermore, this proposed mechanism for dioxygen activation does not involve a redox cycle with the transition metal ion and may be important in other low temperature catalytic reactions involving O 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Sooting tendencies of 20 bio-derived fuels for advanced spark-ignition engines

The sooting tendencies of 20 bio-derived fuels indicated as potential blendstocks for spark-ignition engines by the Co-Optimization of Fuels & Engines (Co-Optima) Initiative are studied. The Yield Sooting Index (YSI) is used to quantify the sooting tendencies. The Co-Optima Chemical Model is used to predict the numerical YSIs for all test fuels, and these results are compared with measurements. Experimental YSIs are newly measured for 2 furans and are taken from our previous work for the other compounds. Overall, the predicted YSIs agree well with measurements, within the experimental uncertainties, except for 2,5-dimethylfuran (2,5-DMF). It is found that Polycyclic Aromatic Hydrocarbons (PAH) growth reactions have little influence on the relative soot production from each fuel and therefore on YSI predictions. A modified sensitivity coefficient formulation is proposed to evaluate reaction sensitivities specifically for YSI. This formulation is applied to the 2,5-DMF-doped flame, and six 2,5-DMF initial decomposition reactions, which lead to different major soot precursors, are identified as the most sensitive reactions. The impact of the chemical kinetic uncertainties embedded in these reactions is quantified by randomly perturbing their reaction rates within a factor of two. The resulting prediction uncertainty in the 2,5-DMF-doped flame is found to be ± 8 YSI units (±11%), which demonstrates that the test-fuel-specific decomposition reactions indeed have considerable influence on its YSI prediction. Our research suggests that more accurate kinetic parameters for fuel initial decomposition reactions can potentially improve YSI predictions effectively, without altering the YSI predictions of other fuels with significantly different molecular structures.

09 BIOMASS FUELS↗
DOE OSTI2021

Siloxyaluminate and Siloxygallate Complexes as Models for Framework and Partially Hydrolyzed Framework Sites in Zeolites and Zeotypes.

Anionic molecular models for nonhydrolyzed and partially hydrolyzed aluminum and gallium framework sites on silica, M[OSi(OtBu) 3 ] 4 - and HOM[OSi(OtBu) 3 ] 3 - (where M=Al or Ga), were synthesized from anionic chlorides Li{M[OSi(OtBu) 3 ] 3 Cl} in salt metathesis reactions. Sequestration of lithium cations with [12]crown-4 afforded charge-separated ion pairs composed of monomeric anions M[OSi(OtBu) 3 ] 4 - with outer-sphere [([12]crown-4) 2 Li] + cations, and hydroxides {HOM[OSi(OtBu) 3 ] 3 } with pendant [([12]crown-4)Li] + cations. These molecular models were characterized by single-crystal X-ray diffraction, vibrational spectroscopy, mass spectrometry and NMR spectroscopy. Upon treatment of monomeric [([12]crown-4)Li]{HOM[OSi(OtBu) 3 ] 3 } complexes with benzyl alcohol, benzyloxide complexes were formed, modeling a possible pathway for the formation of active sites for Meerwin-Ponndorf-Verley (MPV) transfer hydrogenations with Al/Ga-doped silica catalysts.

Dombrowski, James P↗
DOE OSTI2024

Tip‐Enhanced Imaging and Control of Infrared Strong Light‐Matter Interaction

Optical antenna resonators enable control of light‐matter interactions on the nano‐scale via electron–photon hybrid states in strong coupling. Specifically, mid‐infrared (MIR) nano‐antennas coupled to saturable intersubband transitions in multi‐quantum‐well (MQW) semiconductor heterostructures allow for the coupling strength to be tuned through antenna resonance and field intensity. Here, in this study, tip‐enhanced nano‐scale variation of antenna‐MQW coupling across the antenna is demonstrated, with a spatially‐dependent coupling strength $g_{\textrm{aq}}$ varying from 73 (strong coupling) to 24 cm -1 (weak coupling). This behavior is modeled based on the spatially dependent local constructive and destructive interference between tip and antenna fields. Using a quantum‐mechanical density‐matrix model of the MQW system with its designed values of transition dipole moment, doping density, and population decay time, the picosecond IR pulse coupling to intersubband transitions and the associated tip induced strong‐field saturation effects are described. These results present a new regime of nonlinear IR light‐matter control based on the dynamic manipulation of quantum hybrid states on the nanoscale and in the infrared, with a perspective regarding extension to molecular vibrations.

Wang, Yueying↗
DOE OSTI2022

Pathways for Electron Transfer at MgO–Water Interfaces from Ab Initio Molecular Dynamics

The nature of electron transfer across metal oxide–water interfaces depends significantly on the band gap of the oxide and its band edge energies relative to the potentials of relevant aqueous redox couples. Here we focus on the water interface with MgO, a prototypical wide band gap oxide whose conduction band edge is close in energy to that of water. We investigate the behavior of an excess electron at and out of equilibrium near the interface using ab initio molecular dynamics based on hybrid density functional theory. Our simulations show that under equilibrium conditions the excess electron (donated by an Al impurity in MgO) localizes to a midgap defect state comparable in energy and shape to a hydrated electron in bulk water. To characterize the electron transfer from the conduction band of MgO to interfacial product states, we dope near-equilibrium configurations of the pristine MgO–water system with Al and run short trajectories of these instantaneously out-of-equilibrium systems. Here we observe two distinct products associated with the excess electron: a surface-localized electron (e surf –) and an aqueous hydrogen radical (H • ). The H • pathway exhibits a much higher activation barrier despite being more exoergic, making e surf – the kinetic product. Our characterization of the pathways on the basis of Marcus theory is consistent with the poor observed utility of MgO for water radiolysis. Moreover, we anticipate that the computational framework employed here will be broadly applicable to assessing electron transfer mechanisms at aqueous, photocatalytic interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗