Search NASA⌕ Search

SEARCH · Search NASA

Results for “3D PRINTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Influence of silicon infiltration conditions on microstructure and mechanical properties in binder jet 3D printed SiC

Atmosphere, temperature, and hold time were varied for silicon infiltrated binder jet 3D printed SiC preforms. A two-step infiltration process optimized infiltration. The first step at 1450 °C under vacuum facilitated improved wetting. The second step at elevated temperature in argon advanced infiltration while suppressing vaporization. Variation of the second-step temperature (1550–1750 °C) and hold time revealed that 1550 °C for 1 h in argon following initial vacuum treatment yielded the highest silicon uptake ratio (∼96 %) with minimal residual porosity and strengths of 150–180 MPa. Flexural strength was either stable or improved with elevated temperatures up to 1000°C. In contrast, higher temperatures or extended hold times led to increased silicon vaporization and pores. The optimized process was applied to formulations with extra carbon to enhance SiC content and interconnectedness through reaction bonding, which corresponded to increased flexural strength. These findings provide guidance for silicon infiltration in additively manufactured SiC.

Yoon, Bola [ORNL] (ORCID:0000000260875373)↗

3D Printed Ceramic Reinforced Polymer Composites Microstructure and Mechanical Properties

In Fused Filament Fabrication (FFF) 3D printing a part is made by extruding material layer by layer. Benefits of FFF are the ability to print complex shapes quickly and at a lower cost compared to other manufacturing methods. In this work, filaments composed of either silicon carbide (SiC) or zirconium silicate ceramic particulates in a polylactic-acid (PLA) matrix were used to print specimens for microstructural analysis and mechanical testing. Pure PLA samples were also printed and tested as a baseline for comparison. A Design of Experiments approach was used to test the interactions between three different parameters and their effect on ultimate strength, Young’s modulus, and yield strength. For compression test specimens, these parameters were infill percentage, number of shells, and print orientation angle. For tensile test specimens, the parameters were layer height, number of shells, and infill orientation angle. Pre- and post-compression test samples were evaluated by scanning electron microscopy for microstructural analysis. Infill percentage had the greatest effect on mechanical properties while number of shells and print orientation angle had minor effects. When changing the layer lines from perpendicular to parallel, relative to the loading direction, SiC-PLA had higher mechanical properties while pure PLA properties had decreased, and zirconium silicate-PLA had mix results.

Fused filament fabrication↗

Additive manufacturing of complexly shaped SiC with high density via extrusion-based technique – Effects of slurry thixotropic behavior and 3D printing parameters

Here, additive manufacturing of dense SiC parts was achieved via an extrusion-based process followed by electrical-field assisted pressure-less sintering. The aim of this research was to study the effect of the rheological behavior of SiC slurry on the printing process and quality, as well as the influence of 3D printing parameters on the dimensions of the extruded filament, which are directly related to the printing precision and quality. Different solid contents and dispersant- Darvan 821A concentrations were studied to optimize the viscosity, thixotropy and sedimentation rate of the slurry. The optimal slurry was composed of 77.5 wt% SiC, Y 2 O 3 and Al 2 O 3 powders, 0.25 wt% dispersant and 0.01 wt% defoamer. The printing parameters studied included extrusion pressure, nozzle size, layer height and printing speed; the one that had the most prominent effect on filament width and height was indicated as layer height. The nozzle inner diameter of 1.04 mm, speed of 350 mm/min, layer height of 0.7 mm and extrusion air pressure of 0.31 MPa were the optimal printing parameters. Furthermore, the relationship between the printing parameters and the filament dimensions was successfully predicted by using machine learning and grey system theory. Finally, the relative density of the printed SiC parts sintered at 1900 oC reached 94.7±1.5%.

36 MATERIALS SCIENCE↗

On the optimized 3D printing and post-processing of PETG materials

Glycol-modified polyethylene terephthalate (PETG) is a reliable middle ground between polylactic acid and acrylonitrile butadiene styrene due to its light weight, impact resistance, toughness, flexibility, and cost-effectiveness. However, during 3D printing, the filament form is prone to oozing and stringing. In this study, we optimized the PETG printability via g-code setting and printing parameter modification, and consideration of filament quality, build plate temperature and leveling, and printing design complexity. Printed PETGs were thermally and chemically annealed, and post-processing conditions including annealing time, temperature, and solvent use were investigated. Mechanical properties were evaluated in terms of print parameter changes and post-processing techniques.

36 MATERIALS SCIENCE↗

Processing and properties of SiC composites made via binder jet 3D printing and infiltration and pyrolysis of preceramic polymer

The effect of polymer infiltration and pyrolysis (PIP) cycles with polycarbosiloxane on the microstructure, air leak rate, and properties of SiC composites manufactured by a combination of binder jet 3D printing and PIP are reported. The density, Young’s modulus and flexural strength of disk-shaped components increased with the number of PIP cycles. In the case of density, it increased from 2.05 g/cm 3 in one PIP cycle to 2.33 g/cm 3 after three PIP cycles, while values of flexural strength and Young’s modulus at room temperature after three PIP cycles reached 66.8 ± 2.5 MPa and 69.5 ± 2.8 GPa, respectively. Conversely, the air leak rate was found to decrease with number of PIP cycles, and it reached a value of 4 mbar-liter/s after three cycles. The instantaneous coefficient of thermal expansion of the composite was found to change minimally with the number of PIP cycles and had a value of 4 ± 1.2 ppm/°C between 200°C and 1,000°C. Thermal conductivity was found to increase with number of PIP cycles and to decrease with temperature. For example, after 3 PIP cycles it was found to change from 6.72 ± 0.08 to 6.98 ± 0.08 W/mK at 25°C and 7.36 ± 0.08 to 7.96 ± 0.08 W/mK at 300°C. These values were lower than those of crystalline SiC because of the amorphous nature of the matrix and the presence of pores and cracks.

36 MATERIALS SCIENCE↗

Understanding Fracture Aperture and Permeability Evolution due to Carbonate Mineralization Utilizing 3D Printing

Caprock formations are a crucial part of subsurface-engineered systems. Composed largely of shale, caprocks act as natural barriers that prevent the upward migration of fluids, thereby ensuring the containment of stored substances in subsurface formations. Fractures in these formations are potential leakage pathways for stored fluids. Mineral precipitation reactions in these fractures, particularly calcite, can significantly restrict the fluid permeability, reducing leakage potential. However, predictive capabilities of mineral precipitation in fractures and associated permeability evolution are limited due to a lack of fundamental understanding of such reactions in natural samples, complicated by mineral heterogeneity and the complexity of the fracture structure. In this study, 3D-printed fracture samples are used to understand the impact of carbonate mineralization on fracture aperture and permeability evolution. Samples were printed using a digital light processing (DLP) 3D printer and commercial liquid resin. Calcite precipitation was first tested on printed 2D films before conducting plug flow column experiments aimed to understand fracture permeability changes due to mineral precipitation. Contact angle measurement and Fourier transform infrared (FTIR) spectroscopy on printed 2D films show evidence of a substantial amount of surface energy for calcite nucleation and precipitation. Surface topography analysis of printed fractured surfaces reveals comparable values, highlighting the high replicability of the printed samples. During the column experiments, the permeability reduces exponentially due to a decrease in fracture aperture. Reductions in fracture aperture estimated from effluent concentration and 3D X-ray computed tomography (CT) show comparable results. Moreover, 3D X-ray CT images suggest the impact of local flow velocities on precipitation. The insights gained from this research contribute to a deeper understanding of the permeability evolution due to carbonate mineralization in caprock formations.

3D printing↗

Fabrication of 3D-printed copper based zinc anodes

The production of a porous copper-zinc structure includes providing copper ink, creating a 3D model of the porous copper-zinc structure, 3D printing the copper ink into a porous copper lattice structure using the 3D model, heat treatment of the porous copper lattice structure producing a heat treated porous copper lattice structure, surface modification of the heat treated porous copper lattice structure by nanowires growth on the heat treated porous copper lattice structure producing a heat treated porous copper lattice structure with nanowires, and electrodeposition of zinc onto the heat treated porous copper lattice structure with nanowires to produce the porous copper-zinc structure.

Zhu, Cheng↗

Qualification of Continuous Fiber Reinforced 3D Printed Material for use in Hot Cell Environments

The ability to employ additively manufactured polymers in highly radioactive environments facilitates rapid prototyping as well as emergency replacement of various equipment components contained in-cell. A technical evaluation (TEV) exists seeking to qualify 3D printed polymers and carbon reinforcements for use in-cell, the data generated in this project seeks to support the TEV. The goal of the study is to determine if the loss in mechanical properties is low enough to justify semi-permanent use in-cell.

3D printing↗

3D-Printed Porous Supramolecular Sorbents for Cobalt Recycling

Electronic waste recycling is a recognized global challenge that requires new strategies to bind and release critical materials selectively, such as cobalt present in lithium-ion batteries. To address this challenge, hierarchical 3D-printed porous polymer scaffolds bearing supramolecular receptors were prepared using vat photopolymerization and their cobalt binding profiles were examined as a function of matrix polarity. By combining high-resolution digital light processing (DLP) with polymerization-induced phase separation (PIPS), functional acrylic copolymer networks with micrometer-level precision of geometry and nanometer-level pores were generated. Covalent integration of a methacrylate-functionalized bisdicyclohexyl acetamide (BDCA-MA) receptor enabled binding and release of cobalt(II) chloride (CoCl 2 ) via a solvent polarity switch mechanism involving a change in solvent from ethanol to water. The present structures proved reusable as shown by sustained high binding efficiency over five bind and release cycles. Finally, this platform represents a “green” and energy conscious method for future electronic waste recycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Small Animal IMRT Using 3D-Printed Compensators

Preclinical radiation replicating clinical intensity modulated radiation therapy (IMRT) techniques can provide data translatable to clinical practice. For this work, treatment plans were created for oxygen-guided dose-painting in small animals using inverse-planned IMRT. Spatially varying beam intensities were achieved using 3-dimensional (3D)-printed compensators.

3D PRINTING↗

Oxidation and extraction of Am(VI) using a monoamidic extractant in 3D printed centrifugal contactors

In this study, a series of tests were performed using centrifugal contactors to evaluate the separation of Am(VI) from cerium, as well as to determine the efficiency of the contactors. All experiments were performed using 2-cm, acrylic 3D-printed centrifugal contactors. Solvent extraction tests were performed using 1 M N,N-di(2-ethylhexyl)butyramide (DEHBA)/dodecane and a nitric acid feed solution spiked with 243 Am and 139 Ce and oxidized with 60 mg mL -1 sodium bismuthate. Approximately 72 % of the Am was extracted with a single contactor stage. Co-stripping of Am and Ce was demonstrated but attempts at selective stripping were not successful. Lastly, successful recycle of the used organic phase was demonstrated. Contactor efficiencies of 95-100% were obtained.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A 3D-Printed Microresonator Based on the Quartz-Enhanced Photoacoustic Spectroscopy Sensor for Methane Detection

A 3D-printed microresonator based on a quartz tuning fork has been developed. The sensor performance is evaluated by detection of methane with a fiber-coupled distributed feedback diode laser. In combination with wavelength modulation spectroscopy, a minimum detectable concentration of 15.6 ppb by volume is achieved at atmospheric pressure with an 8-mW average optical excitation power and a lock-in amplifier time constant of 1 s, which corresponds to a 1σ normalized noise equivalent absorption coefficient of 5·10{sup –9} cm{sup –1}·W/Hz{sup 1/2}. An Allan variance analysis shows that the system has long-term stability and can serve as the basis for a portable gas analyzer. Approaches to improve the current sensor performance are also discussed. This design greatly reduces the time of manufacturing the microresonator.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Digital Light Processing (DLP): 3D printing of polymer-based graphene oxide nanocomposites—Efficient antimicrobial material for biomedical devices

Bacterial infections are one of the major causes of surgical implant inefficiency and failure. Herein, we present a Nanocomposite (NC) produced by the addition of Poly(N-vinyl carbazole)-Graphene Oxide dispersion (PVK-GO) as a nanofiller to a commercial photopolymer acrylate resin and 3D printed as coatings via the Digital Light Processing technique. Characterization and bioassay results against Escherichia coli and Staphylococcus aureus confirmed the elevated thermomechanical properties and efficient antibacterial activity of the printed NC-based coatings. In conclusion, the present study demonstrates the fabrication and optimization of a PVK-GO-based NC and its potential utilization as a 3D-printable material for biomedical applications.

2D materials↗

Algorithmic design for 3D printing at building scale

Here, this paper addresses the use of algorithmic design paired with additive manufacturing and their potential impact on architectural design and fabrication of a full-sized building, as demonstrated with the AMIE project. AMIE (Additive Manufacturing and Integrated Energy) was collaboration to 3d print a building and vehicle. Both the car and building were designed to generate, store and share energy in an effort to reduce or eliminate reliability on the power grid. This paper is intended to outline our methodology in successfully designing for these innovative strategies, with a focus on the use of computational design tools as a catalyst for design optimization, integrated project delivery, rapid prototyping and fabrication of building elements using additive manufacturing.

3D printing↗

Active Mixing of Reactive Materials for 3D Printing

The mixing of materials during additive manufacturing is a major benefit which allows one to compositionally and spatially tailor material properties, for example to locally control the reactivity in fuel–oxidizer systems known as thermites. This work characterizes an active mixing printhead used in conjunction with a 3D printing process known as Direct Ink Writing. Besides compositional control, a major benefit of this approach is that it offers a safe method for working with these materials, which can otherwise be hazardous once mixed. Custom fuel and oxidizer inks are fed at fixed volumetric rates into an active mixing printhead, and both the rotational speed of the mixing impeller as well as the fuel–oxidizer ratio are varied. Upon ignition, the propagation speed increases with the rotational speed of the mixer and plateaus above a critical value of ≈750 rpm. The critical mixing speed is corroborated by computational fluid simulations and an analytical expression that considers the inks’ complex fluid behavior. Additionally, varying the composition results in a wide range of propagation speeds with peak reactivity corresponding to a fuel–rich formulation ( Φ = 1.5). As a result, a test article incorporating a fast– and slow–burning region demonstrates how spatial composition can manipulate the reactivity.

3D printing↗