Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffusion problems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Particle acceleration at shocks - A Monte Carlo method

A Monte Carlo method is presented for the problem of acceleration of test particles at relativistic shocks. The particles are assumed to diffuse in pitch angle as a result of scattering off magnetic irregularities frozen into the fluid. Several tests are performed using the analytic results available for both relativistic and nonrelativistic shock speeds. The acceleration at relativistic shocks under the influence of radiation losses is investigated, including the effects of a momentum dependence in the diffusion coefficient. The results demonstrate the usefulness of the technique in those situations in which the diffusion approximation cannot be employed, such as when relativistic bulk motion is considered, when particles are permitted to escape at the boundaries, and when the effects of the finite length of the particle mean free path are important.

Kirk, J. G.↗
NASA NTRS1995

Non-local transport in turbulent MHD convection

The nonlocal non-diffusive transport of passive scalars in turbulent magnetohydrodynamic (MHD) convection is investigated using transilient matrices. These matrices describe the probability that a tracer particle beginning at one position in a flow will be advected to another position after some time. A method for the calculation of these matrices from simulation data which involves following the trajectories of passive tracer particles and calculating their transport statistics, is presented. The method is applied to study the transport in several simulations of turbulent, rotating, three dimensional compressible, penetrative MDH convection. Transport coefficients and other diagnostics are used to quantify the transport, which is found to resemble advection more closely than diffusion. Some of the results are found to have direct relevance to other physical problems, such as the light element depletion in sun-type stars. The large kurtosis found for downward moving particles at the base of the convection zone implies several extreme events.

Miesch, Mark↗
NASA NTRS2001

New Interstellar Dust Models Consistent with Interstellar Extinction, Emission and Abundances Constraints

We present new interstellar dust models that are consistent with both, the FUV to near-IR extinction and infrared (IR) emission measurements from the diffuse interstellar medium. The models are characterized by different dust compositions and abundances. The problem we solve consists of determining the size distribution of the various dust components of the model. This problem is a typical ill-posed inversion problem which we solve using the regularization approach. We reproduce the Li Draine (2001, ApJ, 554, 778) results, however their model requires an excessive amount of interstellar silicon (48 ppM of hydrogen compared to the 36 ppM available for an ISM of solar composition) to be locked up in dust. We found that dust models consisting of PAHs, amorphous silicate, graphite, and composite grains made up from silicates, organic refractory, and water ice, provide an improved fit to the extinction and IR emission measurements, while still requiring a subsolar amount of silicon to be in the dust. This research was supported by NASA Astrophysical Theory Program NRA 99-OSS-01.

Zubko, V.↗
NASA NTRS2004

Notes on Interface Growth Kinetics 50 Years after Burton, Cabrera and Frank

This overview is devoted to some unresolved basic problems in crystal growth kinetics. The density wave approach to propagation of a spatially diffuse interface between a growing crystal and its simple (e.g., metallic) melt is discussed is Section 2. This approach allows for the calculation of kinetic coefficients and is an alternative to the localized interface concept in which each atom belongs to either a solid or a liquid. Sections 3 and 4 deals mainly with layer growth from solution. Mutual retardation of the growth steps via their bulk and d a c e diffusion fields is the major subject. The influence of solution flow on step bunching (Section 4) suggests the essential influence of bulk diffusion on the surface morphology. The flow within the solution boundary layer enhances step-step interaction, influences the step bunching process and the resulting step pattern morphology on the growing surface. Recent experiments on the rates at which strongly polygonized steps on protein and small molecule crystals propagate during growth from solution are analyzed in Section 5 . We have shown that the step segments may be "singular" and that "one-dimensional nucleation" may be the rate limiting stage for the segments that are shorter or comparable in length to the thermodynamically equilibrium interlink distance. In this case, the reciprocal dependence of the segment propagation rate on the segment length that follow from the Gibbs-Thompson law, should be replaced by an abrupt switch from zero to a finite constant velocity. Until recently, the Kossel crystal remained the only model used in crystal growth theory. In such Kossel Gibbs-Thomson law, should be replaced by an abrupt switch &om zero to a finite constant velocity. crystals, all kinks at the steps are identical and the kink rate is a linear function of the supersaturation. In the non-Kossel crystals, there may be several kink configurations characterized by different geometries and energies. These configurations should appear in a specific sequence when each new lattice unit cell is filled. As a result of such a cooperative interaction within the unit cell, a non-linear dependence of the kink rate on the vapor pressure or solution concentration in excess over the equilibrium value should be expected.

Chernov, A. A.↗
NASA NTRS2004

Dust Accumulation and Solar Panel Array Performance on the Mars Exploration Rover (MER) Project

One of the most fundamental design considerations for any space vehicle is its power supply system. Many options exist, including batteries, fuel cells, nuclear reactors, radioisotopic thermal generators (RTGs), and solar panel arrays. Solar arrays have many advantages over other types of power generation. They are lightweight and relatively inexpensive, allowing more mass and funding to be allocated for other important devices, such as scientific instruments. For Mars applications, solar power is an excellent option, especially for long missions. One might think that dust storms would be a problem; however, while dust blocks some solar energy, it also scatters it, making it diffuse rather than beamed. Solar cells are still able to capture this diffuse energy and convert it into substantial electrical power. For these reasons, solar power was chosen to be used on the 1997 Mars Pathfinder mission. The success of this mission set a precedent, as NASA engineers have selected solar power as the energy system of choice for all future Mars missions, including the Mars Exploration Rover (MER) Project. Solar sells have their drawbacks, however. They are difficult to manufacture and are relatively fragile. In addition, solar cells are highly sensitive to different parts of the solar spectrum, and finding the correct balance is crucial to the success of space missions. Another drawback is that the power generated is not a constant with respect to time, but rather changes with the relative angle to the sun. On Mars, dust accumulation also becomes a factor. Over time, dust settles out of the atmosphere and onto solar panels. This dust blocks and shifts the frequency of the incoming light, degrading solar cell performance. My goal is to analyze solar panel telemetry data from the two MERs (Spirit and Opportunity) in an effort to accurately model the effect of dust accumulation on solar panels. This is no easy process due to the large number of factors involved. Changing solar flux (the amount of solar energy reaching the planet), solar spectrum, solar angle, rover tilt, and optical depth (the opacity of the atmosphere due to dust) were the most significant. Microsoft Excel and Visual Basic are used for data analysis. The results of this work will be used to improve the dust accumulation and atmosphere effects model that was first created after the Mars Pathfinder mission. This model will be utilized and applied when considering the design of solar panel array systems on future Mars projects. Based on this data, and depending upon the tenure and application of the mission, designers may also elect to employ special tools to abate dust accumulation, or decide that the expected level of accumulation is acceptable.

Turgay, Eren H.↗
NASA NTRS1974

Pioneer 10 ultraviolet photometer observations at Jupiter encounter

A two-channel extreme ultraviolet photometer on Pioneer 10 was used to investigate hydrogen and helium emissions from the atmosphere of Jupiter and emissions associated with the Galilean satellites. The hydrogen Lyman alpha signal observed from Jupiter corresponded to 400 R in brightness. By using the results of Wallace and Hunten (1973), the eddy diffusion coefficient is found to be K = 3 x 10 to the (8 plus or minus 1) power. The He I 584-A emission rate was found to be 5.1 R. The radiative transfer problem for the resonantly scattered He I emissions was investigated in the coherent approximation. With these results, the observed brightness, and the derived eddy diffusion coefficient the He/H2 ratio in the mixing region of the atmosphere was found to be equal to 0.18 minus 0.12 or plus 0.46. Emissions attributed to H I Lyman alpha were found at the orbital radius of Io and appear to be due to resonance scattering by a toroidal cloud of H in orbit around Jupiter.

Carlson, R. W.↗
NASA NTRS2000

Vapor Transport Within the Thermal Diffusion Cloud Chamber

A review of the equations used to determine the 1-D vapor transport in the thermal diffusion cloud chamber (TDCC) is presented. These equations closely follow those of the classical Stefan tube problem in which there is transport of a volatile species through a noncondensible, carrier gas. In both cases, the very plausible assumption is made that the background gas is stagnant. Unfortunately, this assumption results in a convective flux which is inconsistent with the momentum and continuity equations for both systems. The approximation permits derivation of an analytical solution for the concentration profile in the Stefan tube, but there is no computational advantage in the case of the TDCC. Furthermore, the degree of supersaturation is a sensitive function of the concentration profile in the TD CC and the stagnant background gas approximation can make a dramatic difference in the calculated supersaturation. In this work, the equations typically used with a TDCC are compared with very general transport equations describing the 1-D diffusion of the volatile species. Whereas no pressure dependence is predicted with the typical equations, a strong pressure dependence is present with the more general equations given in this work. The predicted behavior is consistent with observations in diffusion cloud experiments. It appears that the new equations may account for much of the pressure dependence noted in TDCC experiments, but a comparison between the new equations and previously obtained experimental data are needed for verification.

Ferguson, Frank T.↗
NASA NTRS1985

Advanced detectors and signal processing for bubble memories

The feasibility of combining silicon and magnetic bubble technologies is demonstrated. Results of bubble film annealing indicate that a low temperature silicon on garnet technology is the most likely one to succeed commercially. Annealing ambients are also shown to have a major effect on the magnetic properties of bubble films. Functional MOSFETs were fabricated on bubble films coated with thick (approximately 1 micron) SiO2 layers. The two main problems with these silicon on garnet MOSFETs are low electron mobilities and large gate leakage currents. Results indicate that the laser recrystallized silicon and gate oxide (SiO2) layers are contaminated. The data suggest that part of the contaminating ions originate in the sputtered oxide spacer layer and part originates in the bubble film itself. A diffusion barrier, such as silicon nitride, placed between the bubble film and the silicon layer should eliminate the contamination induced problem.

Kryder, M. H.↗
NASA NTRS2002

Laminar Soot Processes (LSP)

This is the final report of a research program considering the structure and the soot surface reaction properties of laminar nonpremixed (diffusion) flames. The study was limited to ground-based measurements of buoyant laminar jet diffusion flames at pressures of 0.1-1.0 atm. The motivation for the research is that soot formation in flames is a major unresolved problem of combustion science that influences the pollutant emissions, durability and performance of power and propulsion systems, as well as the potential for developing computational combustion. The investigation was divided into two phases considering the structure of laminar soot-containing diffusion flames and the soot surface reaction properties (soot surface growth and oxidation) of these flames, in turn. The first phase of the research addressed flame and soot structure properties of buoyant laminar jet diffusion flames at various pressures. The measurements showed that H, OH and O radical concentrations were generally in superequilibrium concentrations at atmospheric pressure but tended toward subequilibrium concentrations as pressures decreased. The measurements indicated that the original fuel decomposed into more robust compounds at elevated temperatures, such as acetylene (unless the original fuel was acetylene) and H, which are the major reactants for soot surface growth, and that the main effect of the parent fuel on soot surface growth involved its yield of acetylene and H for present test conditions. The second phase of the research addressed soot surface reaction properties, e.g., soot surface growth and surface oxidation. It was found that soot surface growth rates in both laminar premixed and diffusion flames were in good agreement, that these rates were relatively independent of fuel type, and that these rates could be correlated by the Hydrogen-Abstraction/Carbon-Addition (HACA) mechanisms of Colket and Hall (1994), Frenklach et al. (1990,1994), and Kazakov et al. (1995). It was also found that soot surface oxidation rates were relatively independent of fuel type, were not correlated with O2, CO2, H2O and O collision rates but were correlated with the collision rates of OH with a collision efficiency of 0.14, in agreement with the early measurements in premixed flames of Neoh et al. (1980), after allowing for oxidation by O2 via the classical rate expression of Nagle and Strickland-Constable (1962).

Dai, Z.↗
NASA NTRS1974

Technology application at Rockwell International

Technology diffusion at Rockwell International has progressed from the application of special skills to solve specific problems to the transfer of the required people and skills to allow the commercial divisions to solve their own problems and develop or improve their own products. Our prime effort is concentrated on commercial industrial applications. Rockwell's major emphasis on advanced technology utilization is directed through three operational modes, namely, transfer from technologically developed to underdeveloped organizations within the company; transfer between technologically developed organizations to form new operations within the company; and formation of high technology spin-off organizations beyond the corporate entity.

Meechan, C. J.↗
NASA NTRS1982

Silicon solar cell process development, fabrication and analysis

For UCP Si, randomly selected wafers and wafers cut from two specific ingots were studied. For the randomly selected wafers, a moderate gettering diffusion had little effect. Moreover, an efficiency up to 14% AMI was achieved with advanced processes. For the two specific UCP ingots, ingot #5848-13C displayed severe impurity effects as shown by lower 3sc in the middle of the ingot and low CFF in the top of the ingot. Also the middle portions of this ingot responded to a series of progressively more severe gettering diffusion. Unexplained was the fact that severely gettered samples of this ingot displayed a negative light biased effect on the minority carrier diffusion length while the nongettered or moderately gettered ones had the more conventional positive light biased effect on diffusion length. On the other hand, ingot C-4-21A did not have the problem of ingot 5848-13C and behaved like to the randomly selected wafers. The top half of the ingot was shown to be slightly superior to the bottom half, but moderate gettering helped to narrow the gap.

Iles, P. A.↗
NASA NTRS1985

Multigrid techniques for the solution of the passive scalar advection-diffusion equation

The solution of elliptic passive scalar advection-diffusion equations is required in the analysis of many turbulent flow and convective heat transfer problems. The accuracy of the solution may be affected by the presence of regions containing large gradients of the dependent variables. The multigrid concept of local grid refinement is a method for improving the accuracy of the calculations in these problems. In combination with the multilevel acceleration techniques, an accurate and efficient computational procedure is developed. In addition, a robust implementation of the QUICK finite-difference scheme is described. Calculations of a test problem are presented to quantitatively demonstrate the advantages of the multilevel-multigrid method.

Phillips, R. E.↗
NASA NTRS1985

Excimer laser annealing for fabrication of low-cost solar cells

Pulsed excimer laser annealing was successfully performed using a 50 w laser. Both polished and texturized cells were tried, however, there are serious problems with nonuniformity on texturized cells. A number of cells were produced and compared to diffusion furnace annealed cells. There was no clear economic advantage in using an excimer laser and there was a small penalty on average efficiency. The conclusion was that the excimer laser anneal process must be able to produce superior cells to be considered as a viable process option.

Spitzer, M. B.↗
NASA NTRS1987

Optimal cure cycle design of a resin-fiber composite laminate

A unified computed aided design method was studied for the cure cycle design that incorporates an optimal design technique with the analytical model of a composite cure process. The preliminary results of using this proposed method for optimal cure cycle design are reported and discussed. The cure process of interest is the compression molding of a polyester which is described by a diffusion reaction system. The finite element method is employed to convert the initial boundary value problem into a set of first order differential equations which are solved simultaneously by the DE program. The equations for thermal design sensitivities are derived by using the direct differentiation method and are solved by the DE program. A recursive quadratic programming algorithm with an active set strategy called a linearization method is used to optimally design the cure cycle, subjected to the given design performance requirements. The difficulty of casting the cure cycle design process into a proper mathematical form is recognized. Various optimal design problems are formulated to address theses aspects. The optimal solutions of these formulations are compared and discussed.

Hou, Jean W.↗
NASA NTRS1989

Numerical simulations in combustion

This paper reviews numerical simulations in reacting flows in general and combustion phenomena in particular. It is shown that use of implicit schemes and/or adaptive mesh strategies can improve convergence, stability, and accuracy of the solution. Difficulties increase as turbulence and multidimensions are considered, particularly when finite-rate chemistry governs the given combustion problem. Particular attention is given to the areas of solid-propellant combustion dynamics, turbulent diffusion flames, and spray droplet vaporization.

Chung, T. J.↗
NASA NTRS1990

Is there a classical Hyades lithium problem?

The distribution of surface lithium abundances in the Hyades cluster, as a function of effective temperature, has resisted a satisfactory theoretical explanation for more than two decades. Trends in the historically recomputed values of stellar opacity have stimulated a systematic investigation of the effects of larger opacities on lithium depletion during the premain-sequence evolution of low-mass stars. It is shown that the calculated depletion depends quite strongly on the opacities employed, and that both surface and interior opacities play an important role. By performing standard evolutionary calculations with parameterized increments in the opacities, the observed Hyades Li and T(eff) relation for G and K dwarfs have been determined in a manner consistent with the other observational constraints. The solution presented herein requires an increase in interior opacities at about 4 million K over older values by approximately less than 37 percent. Such a change is not incompatible with the historical trends in opacity computations and suggests that the resolution of this problem lies solely in the opacities, without recourse to other physical mechanisms such as turbulent diffusion or 'extra mixing'.

Swenson, Fritz J.↗
NASA NTRS1992

Process modelling for materials preparation experiments

The development is examined of mathematical tools and measurement of transport properties necessary for high fidelity modeling of crystal growth from the melt and solution, in particular for the Bridgman-Stockbarger growth of mercury cadmium telluride (MCT) and the solution growth of triglycine sulphate (TGS). The tasks include development of a spectral code for moving boundary problems, kinematic viscosity measurements on liquid MCT at temperatures close to the melting point, and diffusivity measurements on concentrated and supersaturated TGS solutions. A detailed description is given of the work performed for these tasks, together with a summary of the resulting publications and presentations.

Rosenberger, Franz↗
NASA NTRS2011

Analysis of the Radiative Transfer Equation with Highly Asymmetric Phase Function

This paper considers a scalar radiative transfer problem with high scattering anisotropy, Two computational methods are presented based on decomposition of the diffuse light field into a regular and anisotropic part. The first algorithm (DOMAS) singles out the anisotropic radiance in the forward scattering peak using the Small-Angle Modification of RTE. The second algorithm (DOM2+) separates the single scattering radiance as an anisotropic part, which largely defines the fine detail of the total radiance in the backscattering directions. In both cases, the anisotropic part is represented analytically. With anisotropy subtraction, the regular part of the signal. which requires a numerical solution, is essentially smoothed as a function of angles. Further, the transport equation is obtained for the regular part that contains an additional source function from the anisotropic part of the signal. This equation is solved with the discrete ordinates method. A conducted numerical analysis of this work showed that algorithm DOMAS has a strong advantage as compared to the standard discrete ordinates method for simulation of the radiance transmission, and DOM2 + is the best of the three for the reflection computations. Both algorithms offer at least a factor of three acceleration of convergence of the azimuthal series for highly anisotropic phase functions.

Korkin, Sergey V.↗