Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fermi level”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Infrared, visible and ultraviolet absorptions of transition metal doped ZnS crystals with spin-polarized bands

The formation energies, electronic structures and optical properties of TM:ZnS systems (TM=Cr{sup 2+}, Mn{sup 2+}, Fe{sup 2+}, Co{sup 2+} and Ni{sup 2+}) are investigated by using the first principles method. It is found that the wurtzite and zinc-blende structures have about the same stability, and thus can coexist in the TM:ZnS system. From the wurtzite TM:ZnS, especially, a partially filled intermediate band (IB) is obtained at TM=Cr{sup 2+}, Ni{sup 2+} and Fe{sup 2+}, while it is absent at TM=Mn{sup 2+} and Co{sup 2+}. The additional absorptions are obtained in infrared, visible and ultraviolet (UV) regions, due to the completely spin-polarized IB at Fermi level. The results are very helpful for both the designs and applications of TM:ZnS opto-electronics devices, such as solar-cell prototype. -- Graphical abstract: Absorption coefficients of w-TM{sub x}Zn{sub 1-x}S crystals (TM=Cr{sup 2+}, Mn{sup 2+}, Fe{sup 2+}, Co{sup 2+} and Ni{sup 2+}) at x=0.028. The results may be helpful for the design and applications of TM:ZnS devices, especially for the new high efficiency solar-cell prototype, UV detector and UV LEDs. Display Omitted Research highlights: > It is found that the wurtzite and zinc-blende structures can coexist in TM:ZnS. > An intermediate band is obtained in TM:ZnS at TM=Cr{sup 2+}, Ni{sup 2+} and Fe{sup 2+}. > The absorption coefficients are obtained in infrared, visible and ultraviolet regions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetism and charge density wave order in kagome FeGe

Electron correlations often lead to emergent orders in quantum materials, and one example is the kagome lattice materials where topological states exist in the presence of strong correlations between electrons. This arises from the features of the electronic band structure that are associated with the kagome lattice geometry: flat bands induced by destructive interference of the electronic wavefunctions, topological Dirac crossings, and a pair of van Hove singularities. Various correlated electronic phases have been discovered in kagome lattice materials, including magnetism, charge density waves, nematicity, and superconductivity. Recently, a charge-density wave was discovered in the magnetic kagome FeGe, providing a platform for understanding the interplay between charge order and magnetism in kagome materials. Here, we observe all three electronic signatures of the kagome lattice in FeGe using angle-resolved photoemission spectroscopy. The presence of van Hove singularities near the Fermi level is driven by the underlying magnetic exchange splitting. Furthermore, we show spectral evidence for the charge-density wave as gaps near the Fermi level. Furthermore, our observations point to the magnetic interaction-driven band modification resulting in the formation of the charge-density wave, and indicate an intertwined connection between the emergent magnetism and charge order in this moderately-correlated kagome metal.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Analysis of hopping conduction in semiconducting and metallic carbon nanotube devices

Single-walled carbon nanotube field-effect transistors were irradiated with 20 keV electrons using an e-beam lithography exposure method. Analysis of conduction data in the temperature range from 25 to 300 K indicated the creation of insulating regions containing traps along the nanotube channel. Further analysis of semiconducting and metallic nanotube devices shows dramatic differences in the effect of the electron exposure on the hopping defect barrier heights. Barriers for metallic nanotubes saturate at significantly larger values than semiconducting nanotubes due to shorter localization lengths. The limited and near constant density of states at the Fermi level induces a larger hopping length to localization length ratio, further limiting current and increasing measured trap heights. Poole-Frenkel hopping with an adjustment for electron localization is utilized to explain the inconsistencies. n-type and p-type barriers in the nanotube devices displayed exponential dependence on applied gate voltage bias, with the peak barrier height in the metallic device defining a switch of majority carrier.

36 MATERIALS SCIENCE↗

Ethanol gas sensitivity of carbon nanotip arrays/n-Si heterojunctions at room temperature

Carbon nanotip arrays were grown from silicon substrates via direct current magnetron sputtering at room temperature (RT). The simple carbon nanotip arrays/n-Si (C/Si) heterojunctions were used to detect ethanol gas at RT. The results show that the C/Si junctions have high ethanol gas sensitivity, rapid response, and high recovery speed at RT. Upon exposure to ethanol gas (0.64 g/l) at RT, the resistance of the junction decreases by 35% at a given positive voltage of 8 V. Moreover, the interface capacitance of the junction at 5 kHz can increase by about 40% rapidly when exposed to ethanol gas. The phenomena should be attributed to the change in the Fermi level of the carbon film caused by adsorbing electrons from ethanol molecules. The study shows that the C/Si junctions have potential application as ethanol gas sensors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of subconduction band excitations on thermal conductance at metal-metal interfaces

Increased power densities combined with the decreased length scales of nanosystems give rise to large thermal excitations that can drastically affect the electron population near the Fermi surface. In light of such conditions, a model is developed for electron thermal boundary conductance (eTBC) that accounts for significant changes in the electron and hole populations around the Fermi level that occur at heightened temperatures. By including the contribution of subconduction band electrons to transport and evaluating the transmission coefficient based upon the total number of available states, an extension of eTBC predictions to high temperatures is made possible.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Correlation between structure and electrical transport in ion-irradiated graphene grown on Cu foils

Graphene grown by chemical vapor deposition and supported on SiO{sub 2} and sapphire substrates was studied following the controlled introduction of defects induced by 35 keV carbon ion irradiation. Changes in Raman spectra for fluences ranging from 10{sup 12} to 10{sup 15} cm{sup -2} indicate that the structure of graphene evolves from a highly ordered layer, to a patchwork of disordered domains, to an essentially amorphous film. These structural changes result in a dramatic decrease in the Hall mobility by orders of magnitude while, remarkably, the Hall concentration remains almost unchanged, suggesting that the Fermi level is pinned at a hole concentration near 1x10{sup 13} cm{sup -2}. A model for scattering by resonant scatterers is in good agreement with mobility measurements up to an ion fluence of 1x10{sup 14} cm{sup -2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spectroscopic evidence of the formation of (V,Ti)O{sub 2} solid solution in VO{sub 2} thinner films grown on TiO{sub 2}(001) substrates

We have prepared VO{sub 2} thin films epitaxially grown on TiO{sub 2}(001) substrates with thickness systematically varied from 2.5 to 13 nm using a pulsed laser deposition method, and studied the transport property and electronic states of the films by means of resistivity and in situ synchrotron photoemission spectroscopy (SRPES). In resistivity measurements, the 13-nm-thick film exhibits a metal-insulator transition at around 290 K on cooling with change of three orders of magnitudes in resistivity. As the film thickness decreases, the metal-insulator transition broadens and the transition temperature increases. Below 4 nm, the films do not show the transition and become insulators. In situ SRPES measurements of near the Fermi level valence band find that the electronic state of the 2.5-nm-thick film is different than that of the temperature-induced insulator phase of VO{sub 2} itself although these two states are insulating. Ti 2p core-level photoemission measurements reveal that Ti ions exist near the interface between the films and TiO{sub 2} substrates, with a chemical state similar to that in (V,Ti)O{sub 2} solid solution. These results indicate that insulating (V,Ti)O{sub 2} solid solution is formed in the thinner films. We propose a simple growth model of a VO{sub 2} thin film on a TiO{sub 2}(001) substrate. Near the interface, insulating (V,Ti)O{sub 2} solid solution is formed due to the diffusion of Ti ions from the TiO{sub 2} substrate into the VO{sub 2} film. The concentration of Ti in (V,Ti)O{sub 2} is relatively high near the interface and decreases toward the surface of the film. Beyond a certain film thickness (about 7 nm in the case of the present 13-nm-thick film), the VO{sub 2} thin film without any Ti ions starts to grow. Our work suggests that developing a technique for preparing the sharp interface between the VO{sub 2} thin films and TiO{sub 2} substrates is a key issue to study the physical property of an ultrathin film of ''pure'' VO{sub 2}, especially to examine the presence of the novel electronic state called a semi-Dirac point phase predicted by calculations.

36 MATERIALS SCIENCE↗

Evolution of the pseudogap in a polarized Fermi gas

We calculate the single-particle spectral density of a normal (nonsuperfluid) two-component gas of fermions in the BCS-BEC crossover within a T-matrix approximation. We review how noncondensed pairs lead to a spectral density reminiscent of the ordered state, and explore how a gaplike feature in the spectrum evolves as one changes the polarization of the gas. As the gas is polarized, we find that this pseudogap becomes more diffuse and moves away from the Fermi level, reflecting the fact that fewer pairs are present but that they still play an important role in the excitations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

ARPES spectral functions and Fermi surface for La{sub 1.86}Sr{sub 0.14}CuO{sub 4} compared with LDA + DMFT + {Sigma}{sub k} calculations

The slightly underdoped high-temperature system La{sub 1.86}Sr{sub 0.14}CuO{sub 4} (LSCO) is studied by means of high-energy high-resolution angular resolved photoemission spectroscopy (ARPES) and the combined LDA + DMFT + {Sigma}{sub k} computational scheme. The corresponding one-band Hubbard model is solved via dynamical mean field theory (DMFT), and the model parameters needed are obtained from first principles in the local density approximation (LDA). An 'external' k-dependent self-energy {Sigma}{sub k} describes the interaction of correlated electrons with antiferromagnetic (AFM) pseudogap fluctuations. Experimental and theoretical data clearly show a 'destruction' of the LSCO Fermi surface in the vicinity of the ({pi}, 0) point and formation of 'Fermi arcs' in the nodal directions. ARPES energy distribution curves as well as momentum distribution curves demonstrate a deviation of the quasiparticle band from the Fermi level around the ({pi}, 0) point. The same behavior of spectral functions follows from theoretical calculations suggesting the AFM origin of the pseudogap state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spectroscopic evidence for preformed Cooper pairs in the pseudogap phase of cuprates.

Angle-resolved photoemission on underdoped La{sub 1.895}Sr{sub 0.105}CuO{sub 4} reveals that in the pseudogap phase, the dispersion has two branches located above and below the Fermi level with a minimum at the Fermi momentum. This is characteristic of the Bogoliubov dispersion in the superconducting state. We also observe that the superconducting and pseudogaps have the same d-wave form with the same amplitude. Our observations provide direct evidence for preformed Cooper pairs, implying that the pseudogap phase is a precursor to superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Probing the van Hove singularity of the kagome metal YV 6 Sn 6 through quantum oscillations

Kagome metals with the Fermi energy tuned near the van Hove singularities (vHss) have shown to host exotic phases including unconventional superconductivity and a chiral flux phase arising from a charge density wave. However, most quantum oscillations studies of the electronic structure of kagome metals focus on compounds which electronically or magnetically order, obscuring the unperturbed vHs. Here we present quantum oscillation measurements of YV 6 ⁢Sn 6 which contains a pristine kagome lattice free from long-range order. We discovered quantum oscillations corresponding to a large orbit (≈70% of the Brillouin Zone area) with the heaviest mass ever observed in vanadium-based kagome metals (≈3.3⁢m e ), consistent with a Fermi pocket whose Fermi level is near the vHs. Comparing with first-principle calculations suggests that the effective mass of this pocket is highly sensitive to the position of Fermi level. Finally, our study establishes the enhanced density of states associated with a vHs in a kagome metal, allowing further insight into a potential driving mechanism for the unconventional electronic orderings in this class of materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hall viscosity and nonlocal conductivity of gapped graphene

We calculate the Hall viscosity and the nonlocal (i.e., dependent on wave vector q) Hall conductivity of “gapped graphene” (a nontopological insulator with two valleys) in the presence of a strong perpendicular magnetic field. Using the linear-response theory at zero temperature within the Dirac approximation for the Landau levels, we present analytical expressions for both valley and total Hall viscosities and conductivity up to q 2 at all frequencies. Although the final formulas for total Hall viscosity and conductivity are similar to the ones previously obtained for gapless graphene, the derivation reveals a significant difference between the two systems. First of all, both the Hall viscosity and the Hall conductivity vanish when the Fermi level lies in the gap that separates the lowest Landau level in the conduction band from the highest Landau level in the valence band. It is only when the Fermi level is not in the gap that the familiar formulas of gapless graphene are recovered. Second, in the case of gapped graphene, it is not possible (at least, within our present approach) to define a single-valley Hall viscosity: this quantity diverges with a strength proportional to the magnitude of the gap. It is only when both valleys are included that the diverging terms, having opposite signs in the two valleys, cancel out, and the familiar result is recovered. In contrast to this, the nonlocal Hall conductivity is finite in each valley. These results indicate that the Hoyos-Son formula [Phys. Rev. Lett. 108, 066805 (2012)] connecting the Hall viscosity to the coefficient of q 2 in the small-q expansion of the q-dependent Hall conductivity cannot be applied to each valley, but only to the system as a whole. As a result, the problem of defining a “valley Hall viscosity” remains open.

36 MATERIALS SCIENCE↗

The role of electron correlations in the electronic structure of putative Chern magnet TbMn6Sn6

Abstract A member of the RMn 6 Sn 6 rare-earth family materials, TbMn 6 Sn 6 , recently showed experimental signatures of the realization of a quantum-limit Chern magnet. In this work, we use quantum Monte Carlo (QMC) and density functional theory with Hubbard U (DFT + U ) calculations to examine the electronic structure of TbMn 6 Sn 6 . To do so, we optimize accurate, correlation-consistent pseudopotentials for Tb and Sn using coupled-cluster and configuration–interaction (CI) methods. We find that DFT + U and single-reference QMC calculations suffer from the same overestimation of the magnetic moments as meta-GGA and hybrid density functional approximations. Our findings point to the need for improved orbitals/wavefunctions for this class of materials, such as natural orbitals from CI, or for the inclusion of multi-reference effects that capture the static correlations for an accurate prediction of magnetic properties. DFT + U with Mn magnetic moments adjusted to the experiment predict the Dirac crossing in bulk to be close to the Fermi level, within ~120 meV, in agreement with the experiments. Our non-stoichiometric slab calculations show that the Dirac crossing approaches even closer to the Fermi level, suggesting the possible realization of Chern magnetism in this limit.

36 MATERIALS SCIENCE↗

Band structure theory of the bcc to hcp Burgers distortion

The Burgers distortion is a two-stage transition between bcc and hcp structures. Refractory metal elements from the Sc and Ti columns of the periodic table (bcc/hcp elements) form bcc structures at high temperatures but transition to hcp at low temperatures via the Burgers distortion. Elements of the V and Cr columns, in contrast, remain bcc at all temperatures. The energy landscape of bcc/hcp elements exhibits an alternating slide instability, while the normal bcc elements remain stable as bcc structures. This instability is verified by the presence of unstable elastic constants and vibrational modes for bcc/hcp elements, while those elastic constants and modes are stable in bcc elements. We show that a pseudogap opening in the density of states at the Fermi level drives the Burgers distortion in bcc/hcp elements, suggesting the transition is of the Jahn-Teller-Peierls type. Here, the pseudogap lies below the Fermi level for regular bcc elements in the V and Cr columns of the periodic table. The wave vector k S when the gap opens relates to the reciprocal lattice vector G = (1 1/2 1/2) of the distorted bcc structure as k S = 1/2G. The bcc binary alloys containing both bcc/hcp and bcc elements exhibit a similar instability but stabilize part way through the bcc to hcp transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles study of superconductivity in α and β gallium

Elemental gallium can exist in several phases under ambient pressure. The stable α phase has a superconducting transition temperature, T c , of 0.9 K. By contrast, the T c of the metastable β phase is around 6 K. To understand the significant improvement in T c in the β phase, we first calculate the electronic structure, phonon dispersion, and the electron-phonon coupling of gallium in the α and β phases. Next, we solve the Eliashberg equations to obtain the superconducting gaps and the transition temperatures. Additionally, using these results, we relate the increased T c in the β phase to structural differences between the phases that affect the electronic and phonon properties. The structure motif of the α phase is Ga 2 dimers, which form strong covalent bonds leading to bonding and antibonding states that reduce the density of states at the Fermi level. The β-Ga structure consists of arrays of Ga chains that favor strong coupling between the lattice vibrations and the electronic states near the Fermi level. The increased density of states and strong coupling to the phonons for the β-Ga chains compared to the αGa 2 dimers enhance superconductivity in the β-Ga phase.

36 MATERIALS SCIENCE↗

Correlating Nb-SRF Surface Processing with Evolution of Surface Electronic States

The few nanometers of the surface exposed to RF field plays a major role in defining the RF performance of superconducting cavities. Over the past two decades, several pioneering surface treatment and processing methods have emerged, enabling remarkable improvements in cavity performance by simultaneously achieving high Q with increasing Eacc. These processing methods include: thermal treatment under ultra-high vacuum (UHV) conditions across lo¬¬¬¬¬¬¬w-, mid-, and high-temperature ranges and high temperature treatments under controlled N2 atmosphere. These processes also produce distinct surface oxide configurations with different valence states, thicknesses, and uniformity, as well as different oxygen concentration profiles in bulk Nb. In this work, we are trying to understand how do surface-processing methods and the resulting oxide/oxygen profiles affect the electronic structure of surface and the mechanism of superconductivity? With the help of Fermilab’s in-house X-ray photoemission facility and, in collaboration with the synchrotron-based angle-resolved photoemission (ARPES) facility at Argonne National Laboratory, we are investigating how the valence band structure and density of states (DoS) near the Fermi level modify with different surface treatments. Our observations show that different surface-processing methods lead to distinct evolutions of the valence-band states near the Fermi level during the superconducting transition. This behavior suggests variations in Nb-O orbital hybridizations and points towards the possibility of different underlying mechanisms of superconductivity governed by the surface chemistry and oxide configuration. We also correlate these distinct superconducting mechanisms with RF cavity performance, specifically focusing on measured surface resistance, the nature of the Q-slope, and quench fields observed in SRF measurements. These results will enable us to identify the potential limiting factors and relevant controllable parameters that can be further optimized to improve the performance of SRF cavities.

Tripathi, Malvika [Fermilab]↗

Fundamental insights about interlayer cation migration in Li-ion electrodes at high states of charge

We present that one approach to increasing the capacity of Li-ion batteries is to expand the usable voltage range over which the battery is cycled by charging the cathode to higher voltages. Layered intercalation compounds commonly used as cathodes in Li-ion batteries, however, can become susceptible to irreversible structural changes at high states of charge due to cation migration to the emptied Li layers. Here we report on the discovery of a strong correlation between the position of the Fermi level and the energy barrier for cation migration to the Li layers of fully charged layered intercalation compounds. Since the identity of the transition metal strongly influences the Fermi level, this discovery suggests that cation migration can be suppressed at high states of charge using targeted alloying strategies. First-principles calculations indicate that an increase in the concentration of Ni relative to Co or Mn should reduce, or even impede, interlayer migration in layered oxides. Lastly, the insights of this study pave the way for the discovery of layered intercalation compounds that can approach their theoretical capacities in practice.

36 MATERIALS SCIENCE↗

Overcoming the challenges of accessing topological hallmarks in Sb(112)

Sb is topologically non-trivial and semi-metallic, but differs from many topological semi-metals because of its continuous band gap. By measuring its (112) surface using angle- and spin-resolved photoemission spectroscopy, Sb(112) was shown to have 1D spin-polarised surface states resembling those on vicinal Bi surfaces and many topological insulators and topological semi-metals. The shape and spin-polarisation of the measured features and the calculated bands agreed. However, the measured features had a slightly steeper energy dispersion and different Fermi-momenta than the calculated bands. Both theoretical and experimental methods were necessary when determining the topology of Sb(112). The presence of projected bulk states near the Fermi-level and varying surface localisation of the electronic states meant it was challenging to deduce the topology of Sb(112) from the number of bands crossing the Fermi-level or a continuous contour in the bulk band gap. Ultimately, the calculations and measurements suggest that there are topological surface states on the Sb(112) surface.

36 MATERIALS SCIENCE↗