Search NASA⌕ Search

SEARCH · Search NASA

Results for “TiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Morphology of phase-separated VO2 films deposited on TiO2-(001) substrate

Highlights: • Phase separation in VO{sub 2} films at room temperature was studied by TEM. • Tetragonal phase with a zig-zag interface was observed in the neighborhood of the VO{sub 2}/TiO{sub 2} boundary. • The peculiar interface could be explained by the crystallographic relationship between the monoclinic and tetragonal phases. - Abstract: The basic morphology of phase-separated VO{sub 2} films, in which the tetragonal (metallic) phase coexists with the monoclinic (insulating) phase, was studied using transmission electron microscopy. While the phase transformation temperature in an unstrained crystal is approximately 340 K, it was observed that at 298 K, elastic strain (caused by lattice mismatch with the TiO{sub 2}-(001) substrate) stabilized the tetragonal phase near the VO{sub 2}/TiO{sub 2} boundary. The observed zig-zag-shaped interface of the tetragonal phase was explained by the crystallographic orientation relationship between the tetragonal and monoclinic phases. The observations provide valuable information for future applications of VO{sub 2} films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation on improved performance of Erbium doped TiO2 nanowire based UV detector

Highlights: • PL study showed the removal of oxygen defects of TiO{sub 2} material after Er doping. • Superior photosensitivity was obtained for Er:TiO{sub 2} NW based detector. • Detectivity and NEP were calculated for both undoped and doped detectors. • Photoswitching was observed for Er:TiO{sub 2} NW detector at 350 nm of wavelength. - Abstract: Undoped TiO{sub 2} and Erbium doped TiO{sub 2} nanowires (Er:TiO{sub 2} NWs) were synthesized on respective thin films using e-beam cum glancing angle deposition technique onto n-type silicon substrates. The length of the NWs was ∼182 nm as calculated from field emission gun scanning electron microscopy images. Transmission electron microscopy showed an average NW length of 173 nm. Polycrystalline nature of both samples was obtained from the selected area electron diffraction analysis as well as from the X-ray diffraction (XRD) analysis. Energy dispersive X-ray spectroscopy and variation in the grain size (calculated from XRD) confirmed the doping of Erbium in case of Er:TiO{sub 2} NWs. Increased absorption, as well as enhanced bandgap, was observed for Er:TiO{sub 2} NWs compared to the undoped TiO{sub 2} NWs. Superior device performance in terms of detectivity, sensitivity and photoswitching was obtained for Er:TiO{sub 2} NWs as compared to the undoped TiO{sub 2} NWs in the UV region.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Internal influences of hydrolysis conditions on rutile TiO2 pigment production via short sulfate process

Highlights: • A novel short sulfate process was proposed to produce rutile TiO{sub 2} pigment. • Effects and internal influences of hydrolysis conditions were investigated in detail. • Intrinsic relationship between hydrolysis conditions and pigment properties were revealed. - Abstract: Rutile TiO{sub 2} white pigment was prepared via short sulfate process by using the unenriched industrial TiOSO{sub 4} solution as titanium source through authigenic seed hydrolysis process. The effects and internal influences of hydrolysis conditions on the structure, particle size distribution and pigment properties for the as-synthesized samples were investigated, involving the inducing hydrolysis water volume ratio, ripening time and hydrolysis time after the second boiling point. These hydrolysis factors influenced the number and quality of the initial formed hydrolysis nuclei, the crystal growth and the particle aggregation velocity, eventually determined the pigment properties. And the conditions had internal mathematical regression correlation with crystal structure, particle polydispersity index and pigment properties. The optimal inducing hydrolysis water volume ratio is of 0.123, ripening time is of 29.05 min, and hydrolysis time is of 2.6 h.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

CdS quantum dots/Ti3+-TiO2 nanobelts heterojunctions as efficient visible-light-driven photocatalysts

Highlights: • A novel CdS QDs/Ti{sup 3+}-TiO{sub 2} nanobelts heterojunction photocatalyst is prepared. • It narrows the bandgap and extends the photoresponse to visible light region. • It exhibits excellent visible-light-driven photocatalytic performance. • It is due to synergistic effect of CdS QDs, Ti{sup 3+} self-doping and heterojunction. - Abstract: CdS quantum dots (QDs)/Ti{sup 3+}-TiO{sub 2} nanobelts heterojunctions as 0D/1D architectures are fabricated through hydrothermal-chemical bath deposition combine with in-situ solid-state chemical reduction approach. The CdS QDs of ∼7 nm are loaded on TiO{sub 2} nanobelts with width of 50–300 nm and several micrometers long, and the heterojunctions are formed efficiently. The prepared heterojunctions exhibit excellent photocatalytic performance for complete removal of methylene blue (∼99%) and hydrogen production efficiency (∼480.6 μmol h{sup −1}) under visible light irradiation, which are as high as 2 and 23 times than that of pristine TiO{sub 2} nanobelts. The enhancement is attributed to the Ti{sup 3+} self-doping and CdS QDs extend the photoresponse to visible light region and the formation of heterojunctions favor the spatial separation of photogenerated charge carriers. Therefore, the high-efficient 0D/1D heterojunction composites have potential applications in the field of environment and energy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

TiO2 nanotubes grown on Ti substrates with different microstructure

Highlights: • TiO{sub 2} nanotube layers were grown on four different Ti substrates by anodization. • Ti substrates with completely different microstructures were used. • The grain size of the substrates ranged from nanocrystalline to single-crystalline. • Differences between the nanotubes grown on these substrates were evaluated. • Similar nanotube dimensions were received on all Ti substrates. - Abstract: Four Ti substrates with various microstructures were investigated for the anodic growth of TiO{sub 2} nanotube layers: nanocrystalline and single-crystalline ingots as well as microcrystalline thick Ti sheets and microcrystalline thin Ti foils. All substrates were anodized in a conventional ethylene glycol based electrolyte under identical conditions. The resulting TiO{sub 2} nanotube layers were compared in dimensions and the consumption of Ti required for their growth. Unexpectedly, the results showed that on all substrates nanotube layers with a similar thickness and nanotube diameter, as well as a similar degree of ordering and after annealing the same crystallographic orientation of anatase were received, regardless the microstructures. However, the nanotube layers grown on a Ti sheet revealed a slightly higher thickness compared to the other substrates which were assigned to slower field-assisted dissolution rates due to different impurities found in this substrate compared to other ones.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Observation of oxo-bridged yttrium in TiO2 nanostructures and their enhanced photocatalytic hydrogen generation under UV/Visible light irradiations

Highlights: • Synthesis of yttrium doped TiO{sub 2} nanoparticles (NPs) and nanorods (NRs) through a facile wet chemical method. • The doped Y ions are found to be oxo-bridged with the host TiO{sub 2} through Y-O-Ti like formation. • The NPs of Y:TiO{sub 2} showed increased photocatalytic hydrogen production efficiency. • The observed efficiency of NPs is attributed to their three-dimensional confinement. - Abstract: Yttrium doped TiO{sub 2} (Y:TiO{sub 2}) nanoparticles (NPs) and nanorods (NRs) are synthesized using facile wet chemical methods. Interestingly, the doped Y ions are found to be oxo-bridged with the host TiO{sub 2} through Y-O-Ti like formation as confirmed from their XRD and XPS studies. The photocatalytic hydrogen production efficiency of the synthesized nanostructures was studied under UV and visible light irradiations. The NPs of Y:TiO{sub 2} showed increased activity as compared to NRs. The observed efficiency of NPs is attributed to their three-dimensional confinement, where it facilitated a stronger oxo-bridging formation that improved the metal-to-metal charge transfer process, reducing the band gap and surface energies as compared to NRs. As investigated in this study, the oxo-bridging formation in the doped metal-oxide systems is relatively promising as this configuration largely favors the photocatalytic process by re-designing the charge separation and transfer processes as compare to the other conventional systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Acid-free approach towards the growth of vertically aligned TiO2 nanorods as an efficient photoanode for dye-sensitized solar cells

Highlights: • Vertically aligned TiO{sub 2} NRs are fabricated by an acid-free hydrothermal approach. • Study the effect of TiO{sub 2} NRs growth parameters on its structural/optical properties. • The optimized TiO{sub 2} NRs were employed as an efficient photoanode for DSSCs. • An optimal PCE of 2.45% was achived by DSSC with TiO{sub 2} NRs with heights of ∼1.56 μm. - Abstract: We synthesized the closely packed titanium dioxide nanorods (TiO{sub 2} NRs) on fluorine-doped tin oxide (FTO) glass by a facile and cost-effective hydrothermal method. The TiO{sub 2} NRs were further utilized as a photoanode for dye-sensitized solar cells (DSSCs). For hydrothermal growth of TiO{sub 2} NRs, we utilized an acid-free reaction medium instead of a strong acidic medium, which can reduce the equipment cost as well as the environmental damages. Before employing these TiO{sub 2} NRs for DSSCs as a photoanode, the effects of hydrothermal growth parameters on the structural and optical characteristics of TiO{sub 2} NRs/FTO glass were investigated. Eventually, the TiO{sub 2} NRs with optimized height and diameter were employed to DSSCs and their photovoltaic characteristics were examined.

14 SOLAR ENERGY↗

A novel elaboration for various morphologies of three-layer TiO2 nanotubes by oxygen bubble mould

Highlights: • Three-layer TiO{sub 2} nanotubes with different morphologies were fabricated. • Some cavities inside middle barrier layer were observed for the first time. • Conventional three-stage current-time curves were transformed into four-stage curves. • Growing process of the three-layer nanotubes was explored systematically. - Abstract: A special three-layer TiO{sub 2} nanotube array has been successfully fabricated. The upper and lower porous layers were formed in the same fluoride-containing electrolyte, while the middle barrier layer was formed in fluoride-free electrolyte. By changing the applied voltage of middle barrier layer, the growth process of the lower layer was explored and compared systematically. The results show that at a critical voltage of barrier layer, the lower layer could barely be seen. Below the critical voltage, complete three-layer TiO{sub 2} nanotubes were achieved, but above the critical voltage, the lower layer failed to appear. Furthermore, some cavities inside the barrier layer were obtained under higher voltage of barrier layer and the conventional three-stage current-time curves were transformed into four-stage curves. Based on the oxygen bubble mould and electronic current model, an explanation for the formation of cavities is firstly proposed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fabrication of CdSe nanoparticles sensitized TiO2 nanotube arrays via pulse electrodeposition for photoelectrochemical application

Highlights: • Anodization method approach for the synthesis of TiO{sub 2} nanotubes. • CdSe nanoparticle/TiO{sub 2} nanotube arrays were assembled via pulse electrochemical deposition technique. • Duty cycles were applied in order to enhance the properties of CdSe/TiO{sub 2} nanostructure. • PEC analysis verified that CdSe/TiO{sub 2} structure prepared at 50% duty cycle gave best photocurrent response. • Photoconversion efficiency of CdSe/TiO{sub 2} nanostructure was approximately 59 times greater than TiO{sub 2} nanotubes. - Abstract: Solar energy is an alternative sustainable energy resource that can be harvested using photoelectrochemical cell comprised of inorganic sensitized nanostructured oxide semiconductor electrode. In this work, pulse electrodeposition was used to deposit CdSe onto titanium dioxide nanotube arrays (TiO{sub 2} NTAs). TiO{sub 2} NTAs are commonly used in the nanostructured photoelectrochemical cells due to their high surface area, fewer interfacial grain boundaries and excellent charge transfer between interfaces. Duty cycle of pulse electrodeposition played an important role in the formation of CdSe nanoparticles. A significant enhancement in the photoelectrochemical performance was observed for the heterostructure of CdSe/TiO{sub 2} NTAs. CdSe/TiO{sub 2} NTAs prepared at 50% duty cycle exhibited maximum photocurrent of 1.94 mA cm{sup −2} and photoconversion efficiency of 1.18% which was 59 times higher than bare TiO{sub 2} NTAs. These results demonstrated that significant enhancement in the photoconversion efficiency could be obtained by incorporating CdSe as sensitizer into the TiO{sub 2} nanotube arrays via pulse electrodeposition technique.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Upconversion Er-doped TiO2 nanorod arrays for perovskite solar cells and the performance improvement

Highlights: • Er-doped TiO{sub 2} nanorod absorbs IR and converts into visible light. • The introduction of Er could make a positive shift in flat-band potential. • Er-doped TiO{sub 2} solar cells show a 20% increment in the current density. - Abstract: Upconversion erbium-doped rutile TiO{sub 2} nanorod arrays were synthesized by a facile process and applied in perovskite solar cells (PSCs). The structure was characterized by X-ray powder diffraction (XRD). Energy dispersive spectrometer (EDS) and Tauc plot indicated that Er was successfully introduced and changed TiO{sub 2} band gap from 3.00 eV to 3.07 eV. The incorporation of Er shifts the flat band potential positively and enhances the electron density. The Er-doped TiO{sub 2} nanorods have a broad absorption in the infrared light and up-convert it into visible light, which provides a possibility for PSCs to use NIR light for higher performance. A higher photocurrent density (J{sub sc}) of 22.97 mA/cm{sup 2} and a power conversion efficiency (PCE) of 10.6% were obtained, showing 20% and 16.5% increment in J{sub sc} and PCE, respectively, when compared with the un-doped device. The performance improvement was ascribed to the upconversion performance, enhanced electron-injection efficiency and reduced charge recombination.

14 SOLAR ENERGY↗

Flame-made TiO2(B)

Highlights: • Flame-made titania can contain up to 27% TiO{sub 2}(B). • TiO{sub 2}(B) is present due to quenching. • The fraction of TiO{sub 2}(B) depends on residence time at high temperature. • Flame-made titania containing TiO{sub 2}(B) photocure epoxy more efficiently than P25. - Abstract: Titania nanoparticles containing both monoclinic (TiO{sub 2}(B) – a promising battery material and catalyst) and anatase crystal phases are synthesized with a low-cost, scalable flame spray pyrolysis (FSP) process, as confirmed by X-ray diffraction, transmission electron microscopy and Raman spectroscopy. The latter reveals TiO{sub 2}(B) contents of up to 27% in the crystalline phase fraction. The amount of TiO{sub 2}(B) increases as the time for nanoparticle growth in the flame decreases through quenching with ambient air. It can be controlled by varying the flow rates of precursor solution and dispersion oxygen into the flame. The FSP-made titania outperforms commercial titania P25 in the photocuring of epoxy, indicating its potential as a photocatalyst.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fabrication of high efficiency perovskite solar cells based on mesoporous TiO2 nanofibrous film under high humidity conditions

Highlights: • 1D TiO{sub 2} nanofibrous film was prepared by electrospinning technique as mesoporous of PSCs. • PSCs were fabricated under ambient conditions even with a high humidity condition more than 40%. • The 1D TiO{sub 2} nanofiber-based PSCs achieved a power conversion efficiency (PCE) about 11.6% compared with 7.5% whereas the 0D TiO{sub 2} nanoparticle-based PSCs only has 7.5%. - Abstract: One-dimensional (1D) TiO{sub 2} nanofibrous film with good morphology and electrical characteristics was prepared by electrospinning technique. And then perovskite solar cells (PSCs) were fabricated based on 2-μm-thick mesoporous TiO{sub 2} nanofibrous film under ambient conditions even with a high humidity condition more than 40%. The devices show high power conversion efficiency (PCE) due to high porosity that is beneficial to the loading of CH{sub 3}NH{sub 3}PbI{sub 3} perovskite layer. This high-porosity 1D TiO{sub 2} nanofibrous film also acts as a protection layer which can enhance the moisture stability of CH{sub 3}NH{sub 3}PbI{sub 3}. As a result, conversion efficiency of 11.6% and short-circuit current density (J{sub sc}) of 17.3 mA were achieved under 100 mW cm{sup −2} AM 1.5 G solar illumination. These two values are both higher than those of zero-dimensional (0D) TiO{sub 2} nanoparticulate film-based devices.

14 SOLAR ENERGY↗

TiO2∙rGO nanocomposite as a photo catalyst for the reduction of Cr6+

Highlights: • Titania decorated reduced graphene oxide was fabricated by hydrothermal process. • TiO{sub 2} nanoparticles attached to the surfaces of the rGO are anatase. • rGO surfaces were covered with TiO{sub 2} nanoparticles whose average sizes. • Photocatalytic reduction of toxic Cr{sup 6+} is increased as x is increased. - Abstract: Titania decorated reduced graphene oxide (TiO{sub 2}∙x%rGO (x = 0, 1, 05, 10, 15, 20 and 25) nanocomposites (NC’s) were fabricated using a hydrothermal process. Scanning electron microscope (SEM) images show that the rGO surfaces were covered with TiO{sub 2} nanoparticles whose average sizes increased as x is increased. X Ray Diffraction (XRD) of all the NP’s exhibits the diffractions peaks of the anatase phase of the TiO{sub 2}. The Fourier-Transform Infrared (FT-IR) spectra of these NC’s indicate an increase in the Ti-O-C interfacial chemical bond vibration signals as x increases. A decrease in the energy of the band (energy) gap as the amount of rGO is increased is determined from the UV–vis light absorption spectra. The use of these TiO{sub 2}∙x%rGO NC’s to reduce toxic Cr{sup 6+} ions to nontoxic Cr{sup 3+} ions is studied. The photo-catalytic reduction of the toxic Cr{sup 6+} is seen in general to increase as x is increased.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

SiO2-TiO2 doped with Er3+/Yb3+/Eu3+ photoluminescent material: A spectroscopy and structural study about potential application for improvement of the efficiency on solar cells

Highlights: • Intense downconversion emission of Eu{sup 3+} under Uv excitation. • Upconversion emission assigned to the Er{sup 3+}/Yb{sup 3+} under 980 laser pump. • Double excitation simultaneous providing emission in visible range. • Potential application on improvement of solar cells. - Abstract: The various synthesis conditions to obtain a material based on SiO{sub 2}-TiO{sub 2} co-doped with Er{sup 3+}/Yb{sup 3+}/Eu{sup 3+} were investigated, searching for those that present the greatest potential to improve the efficiency of solar cells. Conditions adjusted included heat-treatment temperatures, concentrations of matrix, and concentrations of dopants. Raman spectroscopy results demonstrated the effect of the annealing temperatures on the TiO{sub 2} phase transition and the crystalline phase of the materials, which interfere with the photoluminescence of the materials. The band gap of the materials was evaluated by diffuse reflectance and it decreased due to the doping. The materials were able to absorb UV and IR energy and emit in the visible region, verified by the down conversion, up conversion and the double excitation of the materials. The results showed that the materials may be used as a strategy to use a greater portion of the solar spectrum, improving solar cell efficiency.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evaluation of the synergistic effect between slow photons and electron trapping on the photocatalytic properties of TiO2 photonic crystals

Highlights: • We report the preparation of titanium dioxide photonic crystals (PCs) having two pore sizes. • Electronic band gap (BG) and photonic band gap (PBG) were determined with the use of UV–vis spectroscopy. • The position of PBG was affected by the pore size of PC. • Metallic silver (electron trapping centers) were generated on the surface of both types of PCs by a photoreduction of silver Ag{sup +} ions. • Photocatalytic properties of silver-modified TiO{sub 2} photonic crystals were enhanced by synergistic effect caused by overlapping the edges of PBG and BG combined with electron trapping by AgNPs. - Abstract: Titanium dioxide photonic crystals (PCs) were obtained using the sol-gel method and polystyrene (PS) microspheres as a template with two different diameters: 300 nm and 460 nm. The resulting materials were labeled as PC-300 and PC-460. In the following step, PCs were modified with silver nanoparticles (AgNPs) generated by the photoreduction of silver Ag{sup +} ions. The obtained PCs were denoted as AgNPs/PC-300 and AgNPs/PC-460. The size of the AgNPs were 28 nm ± 2 nm for the AgNPs/PC-300 and 21 nm ± 1 nm for AgNPs/PC-460. The characteristic features of TiO{sub 2} PCs, such as electronic band gap (BG), photonic band gap (PBG) and an occurrence of slow photon effect (SPE), were determined with the use of UV–vis spectroscopy. The photocatalytic performance of the prepared PCs was defined by monitoring the photodegradation rates of Rhodamine B (RhB) measured in the presence of PC-300, PC-460, AgNPs/PC-300, AgNPs/PC-460 and non-porous TiO{sub 2} coating (NPC) as reference material. It was found that the appropriate utilization of SPE by overlapping the edge of PBG with semiconductor BG and electron trapping by the presence of AgNPs exerted a strong synergistic effect on the photocatalytic properties of AgNPs/PCs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Aspect ratio control and photocatalytic properties analysis of anatase TiO2 nanoparticles

Highlights: • TiO{sub 2} nanoparticles with different aspect ratio were prepared and characterized. • Their aspect ratio is tuned by varying surfactants molar ratio and concentration. • TiO{sub 2} nanoparticles show photocatalytic activities in degradation of methylene blue. - Abstract: Anatase TiO{sub 2} nanoparticles with tuning size and aspect ratio were successfully prepared by a simple solvothermal method, using ethanol as a solvent, titanium butoxide as a precursor, and oleic acid and oleylamine as anionic and cationic capping agents, respectively. The average size and aspect ratio of these nanoparticles can be greatly regulated by varying the oleic acid/oleylamine molar ratio while keeping their total molar content constant and finely adjusted by increasing the total capping agents molar concentration in solvent at constant molar ratio (oleic acid/oleylamine molar ratio = 1:1). The variation of molar ratio or molar concentration enables a manipulation of the growth rate along different facets of TiO{sub 2} nanoparticles and, consequently, a control of the aspect ratio of these nanoparticles. Moreover, the photocatalytic degradation rate of methyl blue for sample prepared with molar ratio of oleic acid to oleylamine at 6:24 is over 11% higher than that for the other samples.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Lead free, air stable perovskite derivative Cs2SnI6 as HTM in DSSCs employing TiO2 nanotubes as photoanode

Highlights: • Cs{sub 2}SnI{sub 6} HTM layer was deposited onto titania nanotube photoanode through dip coating to fabricate all solid state DSSCs. • Enhanced photo conversion efficiency was obtained through varying dip coating time for Cs{sub 2}SnI{sub 6} HTM on TNT photoanode. • ss-DSSCs with lead-free perovskite derivative Cs{sub 2}SnI{sub 6} as HTM shows stable performance up to 10 days. - Abstract: Cs{sub 2}SnI{sub 6} is an air-stable and non-toxic perovskite variant photovoltaic material which exhibits p-type conductivity under doped conditions. In this work, we report the synthesis and stability studies of Cs{sub 2}SnI{sub 6} towards its application as a solid-state Hole Transport Material (HTM) in Titania Nanotube (TNT) based Dye Sensitized Solar Cells (DSSCs). Cs{sub 2}SnI{sub 6} crystals were synthesized using precipitation method and its stability was assessed using X-ray diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS) and Thermogravimetric Analysis (TGA). Cs{sub 2}SnI{sub 6} doped with SnI{sub 2} was deposited onto the TNT photo-anode as the HTM layer through dip coating. Deposition time was varied to obtain a continuous layer of Cs{sub 2}SnI{sub 6} HTM over TNT photo-anode and cell characteristics were studied. We were able to fabricate air stable, all solid-state solar cells with a Jsc of 6 mA/cm{sup 2}, Voc of 536 mV and PCE of 1.3%. The study propounds contemporary analysis on Sn based perovskite systems, in the field of DSSCs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sol-gel preparation and characterization of Er3+ doped TiO2 luminescent nanoparticles

Highlights: • Sol-gel derived Er{sup 3+} doped TiO{sub 2} nanoparticles for potential use in solar cells and bio imaging. • Influence of Er{sup 3+} doping into TiO{sub 2} with various Er{sup 3+} concentration on structural, optical, and luminescence properties. • Down-and up-conversion luminescence behaviour of Er{sup 3+} doped titanium dioxide. - Abstract: The present paper reports on down-and up-conversion luminescence behaviour of sol-gel derived erbium doped titanium dioxide with anatase structure. Through combined structural, optical and electron microscope analysis, effective and influence of Er{sup 3+} doping into TiO{sub 2} lattice has been demonstrated using X-Ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), and optical reflectance spectra. XRD results showed only anatase diffraction peaks of TiO{sub 2}, indicating the formation of a pure anatase phase even after Er{sup 3+} incorporation into TiO{sub 2} lattice. Selected Area Electron Diffraction (SAED) confirmed that the synthesized TiO{sub 2} nanoparticles are polycrystalline in nature which correlated well with XRD findings. Upon excitation at 320 nm, two down-conversion contributions at 378 nm and 435 nm attributed to indirect band gap and defect-related emissions, respectively were observed from both pure and Er{sup 3+} doped TiO{sub 2} nanoparticles. On the other hand, strong green up-conversion emission centred at 544 nm ascribed to {sup 4}S{sub 3/2 }→ {sup 4}I{sub 15/2} transition of Er{sup 3+} was observed under 980 nm laser excitation for all Er{sup 3+} doped TiO{sub 2} samples. This result analysis brings insight on understanding of structural, optical and luminescence properties of Er{sup 3+} doped TiO{sub 2} nanoparticles for use in solar cells and bio imaging devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗