Search NASA⌕ Search

DOE OSTI · 22805247

Flame-made TiO2(B)

Abstract

Highlights: • Flame-made titania can contain up to 27% TiO{sub 2}(B). • TiO{sub 2}(B) is present due to quenching. • The fraction of TiO{sub 2}(B) depends on residence time at high temperature. • Flame-made titania containing TiO{sub 2}(B) photocure epoxy more efficiently than P25. - Abstract: Titania nanoparticles containing both monoclinic (TiO{sub 2}(B) – a promising battery material and catalyst) and anatase crystal phases are synthesized with a low-cost, scalable flame spray pyrolysis (FSP) process, as confirmed by X-ray diffraction, transmission electron microscopy and Raman spectroscopy. The latter reveals TiO{sub 2}(B) contents of up to 27% in the crystalline phase fraction. The amount of TiO{sub 2}(B) increases as the time for nanoparticle growth in the flame decreases through quenching with ambient air. It can be controlled by varying the flow rates of precursor solution and dispersion oxygen into the flame. The FSP-made titania outperforms commercial titania P25 in the photocuring of epoxy, indicating its potential as a photocatalyst.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Riad, Keroles B., Wood-Adams, Paula M., Wegner, Karsten. 2018-10-15. Flame-made TiO2(B). https://doi.org/10.1016/j.materresbull.2018.06.017. https://searchnasa.com/record/osti%3A22805247/flame-made-tio2-b

Citations retain the original authors and DOI and include this site’s record URL. If this discovery service contributed to your research, you can also cite Search NASA by Indiciae: BibTeX · RIS.

KEEP EXPLORING

Related reports

Gold Quantum Rods: Modulation of Singlet and Triplet Exciton Populations by the Rod Length

Abstract Gold quantum rods (QRs) of Au60, Au78, Au96, and Au114 (protected by thiolate ligands) exhibit exclusive fluorescence, which is different from the shorter Au42 QR with dual emission (fluorescence + phosphorescence). Herein, we report the excitation wavelength-dependent near-infrared-II photoluminescence (PL) and exciton dynamics of this series of QRs. Interestingly, the fluorescence quantum yield (QY) of the QRs is much higher (2–10×) when the lowest singlet excited state (S1) is excited compared to the excitation of high-lying states (Sn). A metastable intermediate singlet state (denoted S′) is identified by transient absorption spectroscopy when Sn is excited, and this S′ state leads to fast “skybridge” intersystem crossing (ISC), which contributes primarily (>60%) to the total triplet population. With increasing aspect ratio (AR) of QRs (from 6.3 to 18.7), nonradiative processes accelerate, leading to fast decay of the S1 state (hence, less QY) and of the T1 state (barely phosphorescent). A detailed energy flow mechanism is determined for the QRs after photoexcitation, which offers a design principle for manipulation of exciton dynamics toward potential utilization of higher excited states in applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Demonstration of gold nanorod systems for enhanced total efficiency: Experimental and numerical analysis

This study investigates the photothermal performance of gold nanorods engineered to exhibit longitudinal plasmon resonances at 695 nm, 780 nm, and 970 nm. The work combines synthesis, structural characterization, extinction measurements, numerical modeling, and controlled temperature experiments to quantify how nanorod geometry, resonance tuning, concentration, and chamber shape jointly influence heat generation. Transmission electron microscopy confirms that increasing nanorod aspect ratio systematically shifts the longitudinal plasmon peak toward the near-infrared region. Extinction measurements show strong agreement with theoretical predictions, validating the numerical model across two independent datasets. Three chamber geometries were tested under laser excitation at 640 nm, 808 nm, and 980 nm: an ascending stepped base, a flat base, and a descending stepped base. Without nanorods, the ascending geometry produced the highest efficiency due to enhanced natural convection. After introducing gold nanorods, all geometries exhibited substantial thermal enhancement, with total efficiencies exceeding 20%. The strongest improvement was obtained for nanorods resonant at 780 nm with a mass concentration of 4.6 mg/mL implemented on the descending stepped-base geometry. This performance resulted from the combined effect of spectral overlapping with the 808 nm laser, the highest nanorod concentration, and localized heat accumulation that intensified buoyancy-driven flow. The findings demonstrate that total efficiency is governed by a synergistic interplay between optical resonance, nanoparticle concentration, and macroscopic chamber design, revealing the system-level coupling between nanoscale plasmonic absorption and macroscale heat-transfer phenomena. The results provide a validated framework for tuning nanoscale plasmonic absorbers and optimizing thermal systems for applications requiring efficient light-to-heat conversion.

77 NANOSCIENCE AND NANOTECHNOLOGY↗