Search NASA⌕ Search

SEARCH · Search NASA

Results for “Truss Structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Space power stations - Space construction, transportation, and pre-development, space project requirements

Several features of solar energy space power stations are discussed. An end-to-end analysis of a system using silicon solar cells is reviewed, and the merits of construction in low earth orbit and in geosynchronous orbit are compared. A suggested space construction procedure, described in detail, would use a 'beam builder', an automated machine, to fabricate the first sublevel truss structural members from strip stock material that is stored on reels. An assembly jig would then be used to position a number of beam builders in the proper location and to support the beams as they are produced to facilitate joining them to form the final space power station structure. Space projects for evaluating the construction concept are proposed, and a possible space construction sequence is considered. Space transportation that would be required in conjunction with the space power station is described.

Piland, R.↗
NASA NTRS1978

Propulsion options for space-based orbital transfer vehicles

A concept for a lightweight space-based orbital transfer vehicle (OTV) featuring thin, spherical, pressure-designed aluminum liquid-oxygen and liquid-hydrogen tanks and a truss structure of composite materials is used as a baseline design for a large-cargo OTV. Vehicle sizing, fleet analysis, and parametric cost analysis are used to evaluate the effects of engine technology, vehicle staging, and high-thrust versus low-thrust transfer. Results indicate that Earth-to-orbit launch costs and OTV engine performance are strong drivers in orbital transportation cost and that there is no significant benefit in staging vehicles. At the low values of Earth-to-orbit cost representative of advanced launch vehicles, low-thrust and high-thrust OTV's are competitive.

Rehder, J. J.↗
NASA NTRS1977

Space Fabrication Demonstration System

Progress in the development of a beam builder to be deployed by space shuttle for assembly of large structures in space is reported. The thermal coating for the structural truss was selected and the detail truss design and analysis completed. Data acquired during verification of the design of the basic 'building block' truss are included as well as design layouts for various fabrication facility subsystems.

Source record↗
NASA NTRS1983

Interactive analysis of a large aperture Earth observations satellite

A system level design and analysis has been conducted on an Earth Observation Satellite (EOS) system using the Interactive Design and Evaluation of Advanced Spacecraft (IDEAS) computer-aided design and analysis program. The IDEAS program consists of about 40 user-friendly technical modules and an interactive graphics display. The reflector support system and feed mast of the EOS spacecraft are constructed with box-truss structural concept, a lattice configuration which can be packaged for delivery in a single Shuttle flight and deployed in orbit. The deployed spacecraft consists of a 120-m by 60-m parabolic focal axis. The spacecraft was modeled for structural, thermal, and control systems analysis and structural elements were designed. On-orbit dynamic and thermal loading analyses were conducted; spacecraft weights and developmental and first unit costs were determined.

Wright, R. L.↗
NASA NTRS1983

Interactive analysis of a large aperture Earth Observations Satellite

A system level design and analysis has been conducted on an Earth Observation Satellite (EOS) system using the Interactive Design and Evaluation of Advanced Spacecraft (IDEAS) computer-aided design and analysis program. The IDEAS program consists of about 40 user-friendly technical modules and an interactive graphics display. The reflector support system and feed mast of the EOS spacecraft are constructed with a box-truss structural concept, a lattice configuration which can be packaged for delivery in a single Shuttle flight and deployed in orbit. The deployed spacecraft consists of a 120-m by 60-m parabolic reflector, a 120-m-long support structure, and a 30-m feed arc beam on the focal axis. The spacecraft was modeled for structural, thermal, and control systems analysis and structural elements were designed. On-orbit dynamic and thermal loading analyses were conducted and spacecraft weights were determined.

Wright, R. L.↗
NASA NTRS1984

Conceptual design of a mobile remote manipulator system

A mobile remote manipulator system has been identified as a necessary device for space station. A conceptual design for an MRMS is presented which features (1) tracks on the MRMS and guide pins only on the truss structure, (2) a push/pull drive mechanism which rotates to permit movement in four directions, and (3) spacecrane and mobile foot restraint manipulators (or arms). Operational and design features of the MRMS elements are described and illustrated. Concepts are also presented which permit rotating the operational plane of the MRMS through 90 deg. Such a system has been found to have great utility for initial space station construction, maintenance and repair, and to provide a construction capability for future station growth or large spacecraft assembly and/or servicing.

Bush, H. G.↗
NASA NTRS1982

Honeywell multispectral linear array (MLA) instrument design A system overview

In support of NASA's Experimental Land Observing System, a simple, reliable and relatively inexpensive multispectral linear array (MLA) instrument concept has been developed. The design satisfies requirements for multichannel radiometry and wide field imaging. A reflective off-axis anastigmat telescope is mounted in a highly strength-to-weight efficient truss structure, coupled to a solid beamsplitter assembly. Attention is given to the optical design of the MLA instrument, the telescope structure, the detector arrays, detector cooling, on-orbit calibration, signal processing electronics, the spacecraft interfaces, the modulation transfer function, the signal-to-noise ratio, radiometric accuracy, and spatial registration.

Eyring, D.↗
NASA NTRS1986

Lightweight, Nesting Struts

Hollow cones easily assembled to form trusses. Struts made of graphite-fiber-reinforced epoxy resin tapered for stiffness and compact nesting for transportation. Developed for building large truss structures in space. Useful on Earth in small structures where great strength not required.

Gates, R. M.↗
NASA NTRS1986

Dynamic characteristics of power-tower space stations with 15-foot truss bays

A power tower space station concept which generates power with photovoltaic arrays and where the truss structure has a bay size of 15 ft is described. Rigid body and flexible body dynamic characteristics are presented for a 75-kW Initial Operating Capability (IOC) and 150-kW and 300-kW growth stations. The transient response of the IOC and 300-kW growth stations to shuttle dock, orbit reboost, and mobile remote manipulator system translation loads are studied. Displacements, accelerations, and bending moments at various locations on the IOC and 300-kW growth stations are presented.

Dorsey, J. T.↗
NASA NTRS1986

NASA/DOD Control/Structures Interaction Technology, 1986

Control/structures interactions, deployment dynamics and system performance of large flexible spacecraft are discussed. Spacecraft active controls, deployable truss structures, deployable antennas, solar power systems for space stations, pointing control systems for space station gimballed payloads, computer-aided design for large space structures, and passive damping for flexible structures are among the topics covered.

Wright, Robert L.↗
NASA NTRS1986

Space station utilization and commonality

Several potential ways of utilizing the space station, including utilization of learning experiences (such as operations), utilization of specific elements of hardware which can be largely common between the SS and Mars programs, and utilization of the on-orbit SS for transportation node functions were identified and discussed. The probability of using the SS in all of these areas seems very good. Three different ways are discussed of utilizing the then existing Low Earth Orbit (LEO) SS for operational support during assembly and checkout of the Mars Space Vehicle (SV): attaching the SV to the SS; allowing the SV to co-orbit near the SS; and a hybrid of the first 2 ways. Discussion of each of these approaches is provided, and the conclusion is reached that either the co-orbiting or hybrid approach might be preferable. Artists' conception of the modes are provided, and sketches of an assembly system concept (truss structure and subsystems derivable from the SS) which could be used for co-orbiting on-orbit assembly support are provided.

Butler, John↗
NASA NTRS1987

The design and development of a mobile transporter system for the Space Station Remote Manipulator System

The analyses, selection process, and conceptual design of potential candidate Mobile Transporter (MT) systems to move the Space Station Remote Manipulator System (SSRMS) about the exposed faces of the Space Station truss structure are described. The actual requirements for a manipulator system on the space station are discussed, including potential tasks to be performed. The SSRMS operating environment and control methods are analyzed with potential design solutions highlighted. Three general categories of transporter systems are identified and analyzed. Several design solution have emerged that will satisfy these requirements. Their relative merits are discussed, and unique variations in each system are rated for functionality.

Carroll, Thomas W.↗
NASA NTRS1986

Definition status of the U.S. Space Station system

The configuration, design, and capabilities of the Space Station are briefly reviewed. In particular, attention is given to the truss structure, photovoltaic and solar dynamic power generation systems, pressurized habitation and laboratory modules, and provisions for extravehicular activity. The discussion covers the Space Station assembly sequence, and the main elements of the power, communication, environmental, and life support systems of the Space Station.

Craig, M. K.↗
NASA NTRS1986

Telescience in orbit

A promising concept for the scientific use of the NASA Space Station involves attaching payloads to the dual keel truss structure of the manned base, specifically on the upper and lower booms. The lower boom will be primarily employed by the earth observation and space plasma studies community, while the upper boom will be used by astronomers for such instruments as the Solar Optical Telescope and the Astrometric Telescope Facility. The indispensability of a robust Space Shuttle system for these Space Station uses is noted.

Black, D. C.↗
NASA NTRS1986

Studies of modal identification performance using hybrid data

Modal identification accuracy can be affected significantly in practice by high modal density and nonlinearities. It may be difficult to determine the true number of modes, and many of the identified mode shapes may be questionable. Results can vary considerably using different analysis techniques. This paper introduces a new method for studying modal identification performance under such circumstances. A difficult set of test data from an erectable truss structure was modified numerically by adding two artificial modes with known parameters. These 'hybrid data' were then analyzed with the Polyreference technique and the Eigensystem Realization Algorithm (ERA). Identification performance is studied by comparing the identified modal parameters for the artificial modes with their known values.

Pappa, Richard S.↗
NASA NTRS1987

Proposed studies of a 30 meter imaging interferometer concept

An imaging interferometer in space based on the use of 15 m sections of graphite-epoxy truss structure to form the basic mechanical support system is suggested. One simple design is a Y-shaped array of 3 coplanar arms, each 15 m long and 1.5 m in diameter, together with a perpendicualr mast of similar length. Roughly 15 observing telescopes of 0.5 m diameter would be used, with laser interferometers controlling the optical pathlengths. The total mass of the imaging interferometer is 3000 kg. With this design, the entire interferometer can be carried to orbit with a single STS launch and then deployed. The interferometer could be operated either in a fully illuminated Sun-synchronous orbit at 1400 km altitude or loosely attached to the Space Station.

Stebbins, R. T.↗
NASA NTRS1988

Grammians and model reduction in limited time and frequency intervals

In this paper the controllability and observability grammians in limited time and frequency intervals are studied, and used for model reduction. In balanced and modal coordinates a near-optimal reduction procedure is developed, yielding the reduction error (norm of the difference between the output of the original system and the reduced model) almost minimal. Several examples are given to illustrate the concept for model reduction of continuous- and discrete-time systems, stable and unstable systems, in limited tim or/and frequency interval. Finally, the model reduction of a flexible truss structure is presented.

Gawronski, Wodek↗
NASA NTRS1989

Antenna surface contour control system

The invention is a system for automatically controlling the surface contour of a deployable and restowable antenna having a mesh reflector surface supported by a circular, folding hoop affixed to a central, telescoping column. The antenna, when deployed, forms a quad-aperture reflector with each quadrant of the mesh surface shaped to provide an offset parabolic radio frequency (RF) reflector. The hoop is supported and positioned by quartz support cords attached to the top of a column and by lower graphite hoop control cords that extend between the hoop and base of the column. The antenna, an RF reflective surface, is a gold plated molybdenum wire mesh supported on a graphite cord truss structure that includes the hoop control cords and a plurality of surface control cords attached at selected points on the surface and to the base of the column. The contour of the three-dimensional surface of the antenna is controlled by selectively adjusting the lengths of the surface control cords and the graphite hoop control cords by means of novel actuator assemblies that automatically sense and change the lengths of the lower hoop control cords and surface control cords.

Elvin L Ahl↗