Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrostatic atomizing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Functionalizing Porous Aromatic Frameworks with Polar Organic Groups for High-Capacity and Selective CO 2 Separation: A Molecular Simulation Study

Porous aromatic frameworks (PAFs) were recently synthesized with the highest surface area to date; one such PAF (PAF-1) has diamond-like structure with biphenyl building blocks and exhibits exceptional thermal and hydrothermal stabilities. Here in this paper, we computationally design new PAFs by introducing polar organic groups to the biphenyl unit and then investigate their separating power toward CO 2 by using grand-canonical Monte Carlo (GCMC) simulations. Among these functional PAFs, we found that tetrahydrofuran-like ether-functionalized PAF-1 shows higher adsorption capacity for CO 2 at 1 bar and 298 K (10 mol per kilogram of adsorbent) and also much higher selectivities for CO 2 /CH 4 , CO 2 /N 2 , and CO 2 /H 2 mixtures when compared with the amine functionality. The electrostatic interactions are found to play a dominant role in the high CO 2 selectivities of functional PAFs, as switching off atomic charges would decrease the selectivity by an order of magnitude. This work suggests that functionalizing porous frameworks with tetrahydrofuran-like ether groups is a promising way to increase CO 2 adsorption capacity and selectivity, especially at ambient pressures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deep-ultraviolet transparent conducting SrSnO 3 via heterostructure design

Exploration and advancements in ultrawide bandgap (UWBG) semiconductors are pivotal for next-generation high-power electronics and deep-ultraviolet (DUV) optoelectronics. Here, we used a thin heterostructure design to facilitate high conductivity due to the low electron mass and relatively weak electron-phonon coupling, while the atomically thin films ensured high transparency. We used a heterostructure comprising SrSnO 3 /La:SrSnO 3 /GdScO 3 (110), and applied electrostatic gating, which allow us to effectively separate charge carriers in SrSnO 3 from dopants and achieve phonon-limited transport behavior in strain-stabilized tetragonal SrSnO 3 . This led to a modulation of carrier density from 10 18 to 10 20 cm −3 , with room temperature mobilities ranging from 40 to 140 cm 2 V −1 s −1 . The phonon-limited mobility, calculated from first principles, closely matched experimental results, suggesting that room temperature mobility could be further increased with higher electron density. In addition, the sample exhibited 85% optical transparency at a 300-nm wavelength. These findings highlight the potential of heterostructure design for transparent UWBG semiconductor applications, especially in DUV regime.

Science & Technology - Other Topics↗

Dynamics of coupled lithium/electron diffusion in TiO2 polymorphs

Molecular dynamics simulations were performed with a potential shell model to investigate the diffusion of lithium ions and electron polarons in rutile and anatase. Simulations of an isolated lithium ion in rutile predict fast diffusion in the c channels with an activation energy of 0.05 eV, which corresponds to a jump rate of 4×1011 s-1 and a diffusion coefficient of 9×10-5 cm2·s-1 at room temperature. In anatase, the activation energies for intra- and inter-octahedron lithium hopping are 0.02 and 0.39 eV, respectively, and the lithium diffusion coefficient is four to five orders of magnitude slower than in rutile. When in the presence of an electron polaron, lithium hopping is predicted to be affected up to four hops away. The effects are more pronounced in rutile; whereby the first energy minimum along the c direction is absent due to the strong lithium-electron electrostatic interactions along the open c channels. Combining the lithium hopping and electron transfer rates, a coupled diffusion mechanism emerges whereby the electron polarons diffuse rapidly back and forth around the lithium ions. This process can lead to the occurrence of an instantaneous driving force for lithium hopping. The lithium ion-electron polaron binding energies are found to be large, with a stronger binding in rutile than in anatase: 0.45 and 0.28 eV, respectively, suggesting that, at low lithium mole fractions, lithium ions and electron polarons will form strongly correlated pairs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A hydrogen-bonding network is important for oxidation and isomerization in the reaction catalyzed by cholesterol oxidase

The importance of active-site electrostatics for oxidative and reductive half-reactions in a redox flavoenzyme (cholesterol oxidase) have been investigated by a combination of biochemistry and atomic resolution crystallography. A detailed examination of active-site dynamics demonstrates that the oxidation of substrate and the re-oxidation of the flavin cofactor by molecular oxygen are linked by a single active-site asparagine. Cholesterol oxidase is a flavoenzyme that catalyzes the oxidation and isomerization of 3β-hydroxysteroids. Structural and mutagenesis studies have shown that Asn485 plays a key role in substrate oxidation. The side chain makes an NH⋯π interaction with the reduced form of the flavin cofactor. A N485D mutant was constructed to further test the role of the amide group in catalysis. The mutation resulted in a 1800-fold drop in the overall k{sub cat}. Atomic resolution structures were determined for both the N485L and N485D mutants. The structure of the N485D mutant enzyme (at 1.0 Å resolution) reveals significant perturbations in the active site. As predicted, Asp485 is oriented away from the flavin moiety, such that any stabilizing interaction with the reduced flavin is abolished. Met122 and Glu361 form unusual hydrogen bonds to the functional group of Asp485 and are displaced from the positions they occupy in the wild-type active site. The overall effect is to disrupt the stabilization of the reduced FAD cofactor during catalysis. Furthermore, a narrow transient channel that is shown to form when the wild-type Asn485 forms the NH⋯π interaction with FAD and that has been proposed to function as an access route of molecular oxygen, is not observed in either of the mutant structures, suggesting that the dynamics of the active site are altered.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

FOHI-D: An iterative Hirshfeld procedure including atomic dipoles

In this work, a new partitioning method based on the FOHI method (fractional occupation Hirshfeld-I method) will be discussed. The new FOHI-D method uses an iterative scheme in which both the atomic charge and atomic dipole are calculated self-consistently. In order to induce the dipole moment on the atom, an electric field is applied during the atomic SCF calculations. Based on two sets of molecules, the atomic charge and intrinsic atomic dipole moment of hydrogen and chlorine atoms are compared using the iterative Hirshfeld (HI) method, the iterative Stockholder atoms (ISA) method, the FOHI method, and the FOHI-D method. The results obtained are further analyzed as a function of the group electronegativity of Boyd et al. [J. Am. Chem. Soc. 110, 4182 (1988); Boyd et al., J. Am. Chem. Soc. 114, 1652 (1992)] and De Proft et al. [J. Phys. Chem. 97, 1826 (1993)]. The molecular electrostatic potential (ESP) based on the HI, ISA, FOHI, and FOHI-D charges is compared with the ab initio ESP. Finally, the effect of adding HI, ISA, FOHI, and FOHI-D atomic dipoles to the multipole expansion as a function of the precision of the ESP is analyzed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural changes of linear DNA molecules induced by cisplatin

Interaction between long DNA molecules and activated cisplatin is believed to be crucial to anticancer activity. However, the exact structural changes of long DNA molecules induced by cisplatin are still not very clear. In this study, structural changes of long linear double-stranded DNA (dsDNA) and short single-stranded DNA (ssDNA) induced by activated cisplatin have been investigated by atomic force microscopy (AFM). The results indicated that long DNA molecules gradually formed network structures, beads-on-string structures and their large aggregates. Electrostatic and coordination interactions were considered as the main driving forces producing these novel structures. An interesting finding in this study is the beads-on-string structures. Moreover, it is worth noting that the beads-on-string structures were linked into the networks, which can be ascribed to the strong DNA–DNA interactions. This study expands our knowledge of the interactions between DNA molecules and cisplatin. - Highlights: • We investigate structural changes of dsDNA and ssDNA induced by cisplatin. • AFM results indicated long dsDNA formed network, beads-on-string and aggregates. • ssDNA can form very similar structures as those of long linear dsDNA. • A possible formation process of theses novel structure is proposed.

60 APPLIED LIFE SCIENCES↗

Rutile-Deposited Pt–Pd clusters: A Hypothesis Regarding the Stability at 50/50 Ratio

Mixed Pt–Pd clusters deposited on oxides have been of great interest to catalysis. Clusters containing Pt and Pd in roughly equal proportions were found to be unusually stable against sintering, one of the major mechanisms of catalyst deactivation. After aging of such catalysts, the 50/50 Pt–Pd and Pd–O clusters appeared to be the two most prevalent phases. The reason for the enhanced stability of these equally proportioned clusters has remained unclear. In the following, sintering of mixed Pt–Pd clusters on TiO2(110) for various initial atomic concentrations of Pt and Pd and at a range of catalytically relevant temperatures was simulated. It is confirmed that equally mixed clusters have the relatively highest survival rate. Surprisingly, subnanoclusters containing Pt and Pd in all proportions have very similar geometries and chemical bonding, revealing no apparent explanation for favoring the 1:1 Pt/Pd ratio. However, it was discovered that at high temperatures, the 50/50 clusters have considerably more thermally accessible isomers than clusters containing Pt and Pd in other proportions. Hence, one of the reasons for stability is entropic stabilization. Electrostatics also plays a key role as a subtle charge redistribution, and a shift of electron density to the slightly more electronegative Pt results in the partially charged atoms being further stabilized by intracluster Coulomb attraction; this effect is greatest for 1:1 mixtures.

Environmental Molecular Sciences Laboratory↗

Kinetic Monte Carlo Study of Ambipolar Lithium Ion and Electron–Polaron Diffusion into Nanostructured TiO2

Nanostructured titania (TiO2) polymorphs have proved to be promising electrode materials for next generation lithium-ion batteries. However, there is still a lack of understanding of the fundamental microscopic processes that control charge transport in these materials. Here we present microscopic simulations of the collective dynamics of lithium-ion (Li+) and charge compensating electron polarons (e-) in rutile TiO2 nanoparticles in contact with idealized conductive matrix and electrolyte. Kinetic Monte Carlo simulations are used, parameterized by molecular dynamics-based predictions of activation energy barriers for Li+ and e- diffusion. Simulations reveal the central role of electrostatic coupling between Li+ and e- on their collective drift diffusion at the nanoscale. They also demonstrate that high contact area between conductive matrix and rutile nanoparticles leads to undesirable coupling-induced surface saturation effects during Li+ insertion, which limits the overall capacity and conductivity of the material. These results help provide guidelines for design of nanostructured electrode materials with improved electrochemical performance.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Theoretical study of the elasticity, mechanical behavior, electronic structure, interatomic bonding, and dielectric function of an intergranular glassy film model in prismatic {beta}-Si{sub 3}N{sub 4}

Microstructures such as intergranular glassy films (IGFs) are ubiquitous in many structural ceramics. They control many of the important physical properties of polycrystalline ceramics and can be influenced during processing to modify the performance of devices that contain them. In recent years, there has been intense research, both experimentally and computationally, on the structure and properties of IGFs. Unlike grain boundaries or dislocations with well-defined crystalline planes, the atomic scale structure of IGFs, their fundamental electronic interactions, and their bonding characteristics are far more complicated and not well known. In this paper, we present the results of theoretical simulations using ab initio methods on an IGF model in {beta}-Si{sub 3}N{sub 4} with prismatic crystalline planes. The 907-atom model has a dimension of 14.533 A x 15.225 A x 47.420 A . The IGF layer is perpendicular to the z axis, 16.4 A wide, and contains 72 Si, 32 N, and 124 O atoms. Based on this model, the mechanical and elastic properties, the electronic structure, the interatomic bonding, the localization of defective states, the distribution of electrostatic potential, and the optical dielectric function are evaluated and compared with crystalline {beta}-Si{sub 3}N{sub 4}. We have also performed a theoretical tensile experiment on this model by incrementally extending the structure in the direction perpendicular to the IGF plane until the model fully separated. It is shown that fracture occurs at a strain of 9.42% with a maximum stress of 13.9 GPa. The fractured segments show plastic behavior and the formation of surfacial films on the {beta}-Si{sub 3}N{sub 4}. These results are very different from those of a previously studied basal plane model [J. Chen et al., Phys. Rev. Lett. 95, 256103 (2005)] and add insights to the structure and behavior of IGFs in polycrystalline ceramics. The implications of these results and the need for further investigations are discussed.

36 MATERIALS SCIENCE↗

Metal–Nitrogen–Carbon Cluster–Decorated Titanium Carbide is a Durable and Inexpensive Oxygen Reduction Reaction Electrocatalyst

Clusters of nitrogen- and carbon-coordinated transition metals dispersed in a carbon matrix (e. g., Fe-N-C) have emerged as an inexpensive class of electrocatalysts for the oxygen reduction reaction (ORR). In this work, it was shown that optimizing the interaction between the nitrogen-coordinated transition metal clusters embedded in a more stable and corrosion-resistant carbide matrix yielded an ORR electrocatalyst with enhanced activity and stability compared to Fe-N-C catalysts. Utilizing first-principles calculations, an electrostatics-based descriptor of catalytic activity was identified, and nitrogen-coordinated iron (FeN 4 ) clusters embedded in a TiC matrix were predicted to be an efficient platinum-group metal (PGM)-free ORR electrocatalyst. Guided by theory, selected catalyst formulations were synthesized, and it was demonstrated that the experimentally observed trends in activity fell exactly in line with the descriptor-derived theoretical predictions. The Fe-N-TiC catalyst exhibited enhanced activity (20 %) and durability (3.5-fold improvement) compared to a traditional Fe-N-C catalyst. It was posited that the electrostatics-based descriptor provides a powerful platform for the design of active and stable PGM-free electrocatalysts and heterogenous single-atom catalysts for other electrochemical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reply to: “Pitfalls in identifying active catalyst species”

In Pereira-Hernández et al., we reported the influence of the high-temperature vapor-phase synthesis method (also called atom trapping, or AT) on the activity for CO oxidation of a Pt/CeO 2 catalyst, compared to a conventional synthesis method (strong electrostatic adsorption, or SEA). The findings suggest that the AT method leads to increased activity compared to the SEA method, and this is related to improved redox properties of the support at low temperature. Recently, Ren and Chen questioned the interpretation of the results and suggested alternative explanations for the findings. However, as addressed in this paper, we are firmly of the opinion that the original analysis, results, and conclusions provided in Pereira-Hernández et al. are valid and accurately explain the phenomena observed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomically precise control of rotational dynamics in charged rare-earth complexes on a metal surface

Abstract Complexes containing rare-earth ions attract great attention for their technological applications ranging from spintronic devices to quantum information science. While charged rare-earth coordination complexes are ubiquitous in solution, they are challenging to form on materials surfaces that would allow investigations for potential solid-state applications. Here we report formation and atomically precise manipulation of rare-earth complexes on a gold surface. Although they are composed of multiple units held together by electrostatic interactions, the entire complex rotates as a single unit when electrical energy is supplied from a scanning tunneling microscope tip. Despite the hexagonal symmetry of the gold surface, a counterion at the side of the complex guides precise three-fold rotations and 100% control of their rotational directions is achieved using a negative electric field from the scanning probe tip. This work demonstrates that counterions can be used to control dynamics of rare-earth complexes on materials surfaces for quantum and nanomechanical applications.

36 MATERIALS SCIENCE↗

Modeling DC electrical breakdown using a truncated emission spectrum for trapped radiation

Spontaneously emitted radiation from excited atoms can be of principle importance in certain modes of electrical breakdown, especially positive streamers and some regimes of Townsend breakdown. The electrostatic particle-in-cell code Aleph utilizes the direct simulation Monte Carlo method to compute radiation transport. When there is strong radiation trapping, this approach is limited in that it must resolve the timescale associated with self-absorption. This renders many cases computationally intractable as sub-femtosecond time steps can be required to compute solutions for phenomena that occur over nanoseconds or microseconds. For two specific cases which exhibit strong radiation trapping, we find that spontaneous emissions having a frequency near the line center are inactive in the breakdown process and can be neglected. This enables larger time steps and a computational speedup of up to two orders of magnitude is observed. Some considerations for determining the validity of making such an approximation for Townsend breakdown problems and positive ionization wave problems are presented.

Roberds, N. A.↗

Self-interaction-corrected Kohn–Sham effective potentials using the density-consistent effective potential method

Density functional theory (DFT) and beyond-DFT methods are often used in combination with photoelectron spectroscopy to obtain physical insights into the electronic structure of molecules and solids. The Kohn–Sham eigenvalues are not electron removal energies except for the highest occupied orbital. The eigenvalues of the highest occupied molecular orbitals often underestimate the electron removal or ionization energies due to the self-interaction (SI) errors in approximate density functionals. Here, we adapt and implement the density-consistent effective potential method of Kohut, Ryabinkin, and Staroverov (2014) to obtain SI-corrected local effective potentials from the SI-corrected Fermi–Löwdin orbitals and density in the Fermi–Löwdin orbital self-interaction correction scheme. The implementation is used to obtain the density of states (photoelectron spectra) and HOMO–LUMO gaps for a set of molecules and polyacenes. Good agreement with experimental values is obtained compared to a range of SI uncorrected density functional approximations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gate Tuning of Electronic Phase Transitions in Two-Dimensional NbSe 2

Recent experimental advances in atomically thin transition metal dichalcogenide (TMD) metals have unveiled a range of interesting phenomena including the coexistence of charge-density-wave (CDW) order and superconductivity down to the monolayer limit. The atomic thickness of two-dimensional (2D) TMD metals also opens up the possibility for control of these electronic phase transitions by electrostatic gating. We demonstrate reversible tuning of superconductivity and CDW order in model 2D TMD metal NbSe 2 by an ionic liquid gate. A variation up to ~ 50 % in the superconducting transition temperature has been observed. Both superconductivity and CDW order can be strengthened (weakened) by increasing (reducing) the carrier density in 2D NbSe 2 . The doping dependence of these phase transitions can be understood as driven by a varying electron-phonon coupling strength induced by the gate-modulated carrier density and the electronic density of states near the Fermi surface.

2-dimensional systems↗

A spectral scheme for Kohn–Sham density functional theory of clusters

Starting from the observation that one of the most successful methods for solving the Kohn–Sham equations for periodic systems – the plane-wave method – is a spectral method based on eigenfunction expansion, we formulate a spectral method designed towards solving the Kohn–Sham equations for clusters. This allows for efficient calculation of the electronic structure of clusters (and molecules) with high accuracy and systematic convergence properties without the need for any artificial periodicity. The basis functions in this method form a complete orthonormal set and are expressible in terms of spherical harmonics and spherical Bessel functions. Computation of the occupied eigenstates of the discretized Kohn–Sham Hamiltonian is carried out using a combination of preconditioned block eigensolvers and Chebyshev polynomial filter accelerated subspace iterations. Several algorithmic and computational aspects of the method, including computation of the electrostatics terms and parallelization are discussed. We have implemented these methods and algorithms into an efficient and reliable package called ClusterES (Cluster Electronic Structure). A variety of benchmark calculations employing local and non-local pseudopotentials are carried out using our package and the results are compared to the literature. Convergence properties of the basis set are discussed through numerical examples. Computations involving large systems that contain thousands of electrons are demonstrated to highlight the efficacy of our methodology. The use of our method to study clusters with arbitrary point group symmetries is briefly discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Decontaminant delivery and application methods to enhance decontamination process and efficacy

The objective for the experimental effort was to provide validation for the electrostatic aerosol transport models for particle size and deposition rate and to determine the feasibility of an electrostatic spray process in delivering non-corrosive decontaminants to complex interior spaces, such as an aircraft. The project utilized ITW (Illinois Tool Works) rotary atomizing induction charged nozzle to disperse small, charged droplets of liquid decontaminants uniformly through a contaminated space. Particle size and deposition studies were conducted prior to the feasibility study where the ITW nozzle was optimized and characterized for two decontaminants: EasyDeconTM200 (DF-200) and Steriplex® SD. In addition to the validation studies, two feasibility studies were conducted with anthrax simulant (B. atrophaeus) and sarin simulant (diphenol chlorophosphate, DPCP). Running parameters for the two studies varied according to the starting contaminant challenges (1.0 x 108 CFU/m 2 for B. atrophaeus and 1.0 g/m 2 for DPCP), the amount of decontaminant deposition, and, finally, decontaminant to agent contact time. Results for the DPCP study confirm that our spray method met and exceeded the threshold criteria of <10 mg/m 2 , postdecontamination, for Teflon and aluminum coupons. Results from this study also showed that polycarbonate and rubber coupons can be reduced by <98% and <92%, respectively. Results for the B. atrophaeus study presented a slightly different challenge due to coupon size, however, increasing the size of the coupon confirmed that it is possible for our spray method to meet the threshold criteria of <100 CFU/m 2 . In addition, a computational model was developed in ANSYS Fluent to solve for the air flow, space charge, electric field, and droplet motion involved in electrostatic aerosol transport. Comparison of the model to experiments resulted in good agreement in deposition pattern and total mass deposited on surfaces. Finally, as a consequence of this project, the methodology used for decontamination could be used to improve future contamination scenarios by eliminating or reducing contaminant hazards, thereby allowing equipment and/or facilities, previously unusable, to be reclaimed rather than discarded, resulting in an overall cost savings to the customer.

36 MATERIALS SCIENCE↗