Search NASA⌕ Search

SEARCH · Search NASA

Results for “initialization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1962

The Effect of Initial Imperfections on the Buckling Stress of Cylindrical Shells

Techniques have been developed for making essentially "perfect" thin cylindrical shells and for making shells with definite types of initial deformations. The "perfect" shells give buckling stresses much higher than have previously been obtained. Initial deformations of the form ∆R= a(o) sin ((πx)/L) have been tested and ranges of positive a(o) were found in which there was no lowering of the buckling stress. Negative values of a(o) caused a decrease in the failure load. A theoretical solution which indicated the same trends as were found experimentally has been carried out.

CYLINDRICAL SHELL↗
NASA NTRS1972

Recursive filter initialization.

Description of an initialization technique which partially accounts for the interrelation between the true-state vector errors when recursive filtering is applied in space navigation systems. The technique reduces the undesirable transient effects of the first few measurements and inhibits filter divergence when the interval between measurements is inordinately large. The key feature of this technique is the inclusion of the effect of a number of pseudo-measurements of certain orbital parameters into the initial covariance matrix. The pseudo-measurement technique has been shown to be useful when reinitialization of the error covariance matrix is required to prevent filter divergence.

Battin, R. H.↗
NASA NTRS1973

Preliminary results for a large angle oblique jet impingement and flow and for the effect of initial conditions on the near field of an axisymmetric jet

The structure of an axisymmetric jet in the near field is discussed for jet noise and for jet impingment schemes for STOL aircraft. It is inferred from previous studies, and the inference is supported by analysis, that the scale and intensity of the turbulence structure at the jet exit plane are the important boundary conditions which effect the development of the flow in the near field. The techniques to study these effects while maintaining a uniform mean flow and the results which document the range of the initial conditions are presented. The large angle, oblique jet impingment condition is of interest in terms of the jet/flap interaction. Detailed turbulence data can be obtained with the specially constructed facility. The development of the flow and instrumentation system and initial data from the new facility are presented.

Foss, J. F.↗
NASA NTRS1973

A microscopic study of crack initiation mechanisms in 7075 aluminum alloy sheets.

A study of the opening mode of crack initiation in 7075-T6 aluminum alloy sheets has been conducted with the aid of a scanning electron microscope. Observations were made from several orientations, including the top view of the specimen which showed the notch profile and the edge view of the specimen which showed the entire notch front along the specimen thickness. It was found that the edge view exhibited the first signs of permanent deformation at about 55% of the breaking strength. These changes took the form of deformation bands which were aligned in the direction of the tensile axis and apparently defined limiting regions of homogeneous slip. It is felt that the appearance of microcracks at loads approaching the breaking strength was of fundamental importance in the formation of the final fracture surface. Many of these microcraks were initiated at intermetallic particles and other metallurgically weak regions on the notch surface. It was also possible to correlate the strain in the notch with the stress intensity factor for the various loads. Very large plastic strains were observed on the notch tip as compared to published values of elongation at fracture for unnotched specimens.

Jones, D. L.↗
NASA NTRS1973

A dual method for optimal control problems with initial and final boundary constraints.

This paper presents two new algorithms belonging to the family of dual methods of centers. The first can be used for solving fixed time optimal control problems with inequality constraints on the initial and terminal states. The second one can be used for solving fixed time optimal control problems with inequality constraints on the initial and terminal states and with affine instantaneous inequality constraints on the control. Convergence is established for both algorithms. Qualitative reasoning indicates that the rate of convergence is linear.

Pironneau, O.↗
NASA NTRS1973

Initial results from the NASA Lewis Bumpy Torus experiment

Initial results were obtained from low power operation of the NASA Lewis Bumpy Torus experiment, in which a steady-state ion heating method based on the modified Penning discharge is applied in a bumpy torus confinement geometry. The magnet facility consists of 12 superconducting coils, each 19 cm i.d. and capable of 3.0 T, equally spaced in a toroidal array 1.52 m in major diameter. A 18 cm i.d. anode ring is located at each of the 12 midplanes and is maintained at high positive potentials by a dc power supply. Initial observations indicate electron temperatures from 10 to 150 eV, and ion kinetic temperatures from 200 eV to 1200 eV. Two modes of operation were observed, which depend on background pressure, and have different radial density profiles. Steady state neutron production was observed. The ion heating process in the bumpy torus appears to parallel closely the mechanism observed when the modified Penning discharge was operated in a simple magnetic mirror field.

Roth, J. R.↗
NASA NTRS1973

Auger electron spectroscopy study of initial stages of oxidation in a copper - 19.6-atomic-percent-aluminum alloy

Auger electron spectroscopy was used to examine the initial stages of oxidation of a polycrystalline copper - 19.6 a/o-aluminum alloy. The growth of the 55-eV aluminum oxide peak and the decay of the 59-, 62-, and 937-eV copper peaks were examined as functions of temperature, exposure, and pressure. Pressures ranged from 1x10 to the minus 7th power to 0.0005 torr of O2. Temperatures ranged from room temperature to 700 C. A completely aluminum oxide surface layer was obtained in all cases. Complete disappearance of the underlying 937-eV copper peak was obtained by heating at 700 C in O2 at 0.0005 torr for 1 hr. Temperature studies indicated that thermally activated diffusion was important to the oxidation studies. The initial stages of oxidation followed a logarithmic growth curve.

Ferrante, J.↗
NASA NTRS1973

Initial development of the June 1971 south equatorial belt disturbance on Jupiter

Photographs taken with the Catalina 61-inch reflector from June 21 through July 10, 1971 have permitted study and measurement of early developments of a major South Equatorial Belt (SEB) disturbance. High resolution photographs of the disturbance were obtained on seven nights during the 19-day interval. The first photograph at 04:38 UT on June 21 recorded the initial outbreak at 79.5 deg longitude (System 2), and -14 deg Zenographic latitude. From this point, dark spots moved along the SEBs towards increasing longitude. The preceding white spot had an initial period of 9h54m32.5 tor-3.5s, and retrograding dark spots on the SEBs a mean period of 9h58m30s.5 tor- 7s. The feature from which all the spots emerged had a rotation period of 9h55m29s tor- 2.5s, and is close to the System 3 radio period of 9h55m29.73s tor- 0.04s derived by Carr.

Minton, R. B.↗
NASA NTRS1974

A fast-initializing digital equalizer with on-line tracking for data communications

A theory is developed for a digital equalizer for use in reducing intersymbol interference (ISI) on high speed data communications channels. The equalizer is initialized with a single isolated transmitter pulse, provided the signal-to-noise ratio (SNR) is not unusually low, then switches to a decision directed, on-line mode of operation that allows tracking of channel variations. Conditions for optimal tap-gain settings are obtained first for a transversal equalizer structure by using a mean squared error (MSE) criterion, a first order gradient algorithm to determine the adjustable equalizer tap-gains, and a sequence of isolated initializing pulses. Since the rate of tap-gain convergence depends on the eigenvalues of a channel output correlation matrix, convergence can be improved by making a linear transformation on to obtain a new correlation matrix.

Houts, R. C.↗
NASA NTRS1973

Initial results from the NASA Lewis Bumpy Torus experiment

Initial results are given for low power operation of the NASA Lewis Bumpy Torus experiment in which a steady-state ion heating method based on a modified Penning discharge is applied to a bumpy torus confinement geometry. The magnet facility consists of 12 superconducting coils capable of 3.0 T each and equally spaced in a toroidal array 1.52 m in major diameter. A 18 cm i.d. anode ring is located at each of the 12 midplanes and is maintained at high positive potentials by a dc power supply. Initial observations indicate electron temperatures from 10 to 150 eV, and ion kinetic temperatures from 200 eV to 1200 eV. Two modes of operation with different radial density profiles can be achieved, depending on the background pressure applied.

Roth, J. R.↗
NASA NTRS1973

The initiation, development, and decay of the secondary flow in a bounded jet

The secondary flow in a low aspect ratio incompressible turbulent bounded jet is described in terms of a near, middle, and far field in which the secondary motion is initiated, developed, and decayed, respectively. The initiation of the secondary flow is explained by the distortion of the planar vortex loops which bound the jet at the exit plane. In the region away from the bounding plates, the vortex loop distortion is similar to that found in rectangular free jets; however, the bounding plates cause an additional production of streamwise vorticity near the plates which has no counterpart in the free jet flow. Downstream of the jet core region, a large-scale secondary flow developes from this vorticity. Farther downstream the secondary flow decays; the resultant flow may be characterized as a combination of a plane jet and boundary layer flows. This explanation is supported by the vorticity and velocity data of this investigation.

Holdeman, J. D.↗
NASA NTRS1973

The initiation of boiling during pressure transients

The initiation of boiling of water on metal surfaces during pressure transients has been investigated. The data were obtained by a new technique in which light beam fluctuations and a pressure signal were simultaneously recorded on a dual beam oscilloscope. The results obtained agreed with those obtained using high speed photography. It was found that, for water temperatures between 90-150 C, the wall superheat required to initiate boiling during a rapid pressure transient was significantly higher than required when the pressure was slowly reduced. This result is explained by assuming that a finite time is necessary for vapor to fill the cavity at which the bubble originates. Experimental measurements of this time are in reasonably good agreement with calculations based on the proposed theory. The theory includes a new procedure for estimating the coefficient of vaporization.

Weisman, J.↗
NASA NTRS1974

Initial Explorer 45 substorm observations and electric field considerations

Description of initial Explorer 45 substorm observations of particle distributions near the equator at altitudes from 5 to 5.5 earth radii. These initial results pertain to the evening sector and to a substorm occurring on Dec. 12, 1971. Fluxes, spectra, and energy densities are presented for 1- to 300-keV protons and 1.5- to 560-keV electrons. Arrival time dispersion effects are shown for electrons. These data are compared with the plasma cloud concepts and electric field model used by DeForest and McIlwain (1971) and McIlwain (1972) to explain particle observations at geosynchronous orbit.

Williams, D. J.↗
NASA NTRS1974

Circuit for detecting initial systole and dicrotic notch

Circuitry is disclosed for processing an arterial pressure waveform to produce during any one cycle a pulse corresponding to the initial systole and a pulse corresponding to the dicrotic notch. In a first channel, an electrical analog of the arterial pressure waveform is filtered and then compared to the original waveform to produce an initial systole signal. In a second channel, the analog is differentiated, filtered, and fed through a gate controlled by pulses from the first channel to produce an electrical pulse corresponding to the dicrotic notch.

Gebben, V. D.↗