Search NASA⌕ Search

SEARCH · Search NASA

Results for “sample damage”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Lightning Protection System for Space Shuttle

The suitability and cost effectiveness of using a lightning mast for the shuttle service and access tower (SSAT) similar to the type used for the Apollo Soyuz Test Project (ASTP) mobile launcher (ML) was evaluated. Topics covered include: (1) ASTP launch damage to mast, mast supports, grounded overhead wires, and the instrumentation system; (2) modifications required to permit reusing the ASTP mast on the SSAT; (3) comparative costing factors per launch over a 10 year period in repetitive maintenance and refurbishment of the existing and modified masts, mast supports, grounded overhead wires, and ground instrumentation required to sustain mechanical and electrical integrity of the masts; (4) effects of blast testing samples of the ASTP ML type mast (corrosion and electrical flashover); (5) comparison of damages from ASTP launch and from blast testing.

Source record↗

The effect of secondary phases on microstructure and irradiation damage in an as-built additively manufactured 316 L stainless steel with a hafnium compositional gradient

Additive manufacturing (AM) or rapid prototyping has become a crucial tool for reducing both cost and time while increasing efficiency in qualifying structural materials for reactor use. In this study, directed energy deposition (DED) was used to develop an as-built 316 L stainless steel sample with three regions of increasing Hf-dopant to study the effects of Hf on the irradiation response of the material. Morphological and microstructural changes were analyzed before and after 2 MeV proton irradiation at 360 °C to a damage of 2.5 dpa at ~ 10 µm below the surface. The addition of Hf effectively suppressed radiation-induced damage (dislocation loops, radiation-induced segregation) due to enhanced point defect recombination. The radiation damage seen in the as-built sample was further compared to a thermo-mechanically treated counterpart of the same fabrication and irradiation parameters which was found to behave superiorly. In conclusion, the increased radiation resistance of this material may be attributed to the as-built microstructure, which includes undissolved Hf particles, delta ferrite grains and cellular sub-grain boundaries that can hinder defect motion.

316L Stainless Steel↗

A Numerical and Experimental Study of Damage Growth in a Composite Laminate

The present study has three goals: (1) perform an experiment where a simple laminate damage process can be characterized in high detail; (2) evaluate the performance of existing commercially available laminate damage simulation tools by modeling the experiment; (3) observe and understand the underlying physics of damage in a composite honeycomb sandwich structure subjected to low-velocity impact. A quasi-static indentation experiment has been devised to provide detailed information about a simple mixed-mode damage growth process. The test specimens consist of an aluminum honeycomb core with a cross-ply laminate facesheet supported on a stiff uniform surface. When the sample is subjected to an indentation load, the honeycomb core provides support to the facesheet resulting in a gradual and stable damage growth process in the skin. This enables real time observation as a matrix crack forms, propagates through a ply, and then causes a delamination. Finite element analyses were conducted in ABAQUS/Explicit(TradeMark) 6.13 that used continuum and cohesive modeling techniques to simulate facesheet damage and a geometric and material nonlinear model to simulate core crushing. The high fidelity of the experimental data allows a detailed investigation and discussion of the accuracy of each numerical modeling approach.

McElroy, Mark↗

TPSAS-NF1676L-19616-DND

The present study has three goals: (1) perform an experiment where a simple laminate damage process can be characterized in high detail; (2) evaluate the performance of existing commercially available laminate damage simulation tools by modeling the experiment; (3) observe and understand the underlying physics of damage in a composite honeycomb sandwich structure subjected to low-velocity impact. A quasi-static indentation experiment has been devised to provide detailed information about a simple mixed-mode damage growth process. The test specimens consist of an aluminum honeycomb core with a cross-ply laminate facesheet supported on a stiff uniform surface. When the sample is subjected to an indentation load, the honeycomb core provides support to the facesheet resulting in a gradual and stable damage growth process in the skin. This enables real time observation as a matrix crack forms, propagates through a ply, and then causes a delamination. Finite element analyses were conducted in ABAQUS/Explicit(TradeMark) 6.13 that used continuum and cohesive modeling techniques to simulate facesheet damage and a geometric and material nonlinear model to simulate core crushing. The high fidelity of the experimental data allows a detailed investigation and discussion of the accuracy of each numerical modeling approach.

Mark McElroy↗

Correlation of the deply technique with the ultrasonic imaging of impact damage in graphite/epoxy composites

A quantitative ultrasonic technique for the nondestructive assessment of impact damage is described. The method, which involves digitizing the entire backscattered ultrasonic wave from a sample, was applied to two test panels removed from a 16-ply graphite/epoxy laminate and impacted with an aluminum ball fired at a velocity of 150 ft/sec. The results of the ultrasonic NDE were compared with the results obtained using the destructive deply technique of Freeman (1984). The NDE method provides through-the-thickness information on damage and only requires access to a single side of the material, while the deply technique gives exact information on the actual damage. Good quantitative agreement between the two techniques was obtained.

Smith, B. T.↗

Radiation damage and structure recorded at high resolution in grains from fine fractions of Luna 16 surface material

Samples returned to earth by Luna 16, were studied with a high voltage electron microscope for ultramicroscopic features. The following amazing features were noted in particles of surface material returned in all the lunar trips: A very high density of tracks of nuclear particles, ultrathin amorphous shells, highly rounded forms, and amazingly good ordering of crystal lattice. These features were used along with calibration experiments in solving the following problems: (1) determining the energy spectrum and chemical abundances of the very heavy nuclei in the solar wind and in the solar cosmic rays; (2) studying the past activity of the sun; (3) obtaining data on lunar dynamic processes affecting dust particles; (4) analyzing composite effects caused by penetration of solar wind into the lunar surface material; and (5) establishing the existence of the ancient lunar atmosphere and magnetic field.

Durrieu, L.↗

Advanced Diagnosis and Accelerated Testing of Balance of System Components for Utility Scale PV Installations: October 1, 2022-September 30, 2024

A study of the durability of PV Balance of System components was performed. Specifically, wire cable jackets and cable connectors were examined within the direct current (DC) PV Power Transmission Chain (PTC). Degraded and failed samples have been obtained from utility PV installations to provide feedback on the degradation modes and the related damage-enabling considerations in today's PV systems. An industry interface group (including system owners, system inspectors, component manufacturers, and test labs) was used to help identify and obtain field-failed samples, for feedback (including samples and experimental design), and to facilitate the subsequent dissemination of the results of this study. Samples were empirically studied using accelerated stress testing with steady-state conditions (cable jackets) in addition to combined-accelerated stress testing (cable jackets, connectors and uncapped connectors). Steady-state accelerated testing has been performed using at least one applied stressor (e.g. UV light) to aid understanding of jacket durability relative to its application. Component- and material-focused failure analysis was conducted to develop an understanding and advise the PV industry. In-depth characterization will be applied selectively to field- and artificially aged-samples, to gain scientific understanding of the structural, chemical, electrical, mechanical, and thermal properties enabling degradation.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Thermal protection system of the Space Shuttle's orbiter

It is the teams view that there is a general lack of awareness of orbiter tile susceptibility to damage by debris - the same applies to the care and critical nature of the shuttle elements and operations process so necessary to minimizing damaging debris - it is essential that all involved employees, both government and contractor, understand that minuscule loose objects or materials coming off the elements will most likely cause some tile damage at the speed encountered during ascent. It is recommended that descriptive material, photos, video tape, debris samples and other appropriate matter be assembled and provided to the proper organizations for dissemination to their employees - it should emphasize that the tiles perform outstanding in their debris-free design environment; but, are extremely sensitive to small particle damage.

Jones, Frank E.↗

Revisiting two thiophosphate compounds constituting d 0 transition metal HfP 2 S 6 and d 10 transition metal α-Ag 4 P 2 S 6 as multifunctional materials for combining second harmonic generation response and photocurrent response

Two acentric thiophosphate compounds, HfP 2 S 6 and α-Ag 4 P 2 S 6 , are revisited and studied as infrared nonlinear optical materials. HfP 2 S 6 and α-Ag 4 P 2 S 6 were structurally characterized without any property measurements. Here, in this work, HfP 2 S 6 and α-Ag 4 P 2 S 6 were synthesized via high temperature salt flux reactions. Low-temperature polymorph acentric α-Ag 4 P 2 S 6 was purified and grown as mm-sized crystals with the aid of AgBr flux. The AgBr flux was revealed to play an important role in stabilizing the acentric α-Ag 4 P 2 S 6 . The acentric α-Ag 4 P 2 S 6 transforms to centrosymmetric β-Ag 4 P 2 S 6 at 850(5) K, which is revealed by differential scanning calorimetry (DSC) analysis and powder X-ray diffraction experiments. HfP 2 S 6 and α-Ag 4 P 2 S 6 are discovered by UV-vis spectrum measurements as indirect bandgap semiconductors with bandgaps of 2.2(1) eV and 2.5(1) eV, respectively, which is supported by DFT calculations and TB-LMTO-ASA calculations. The bonding pictures of α-Ag 4 P 2 S 6 were studied by crystal orbital Hamilton population calculations (COHP) coupled with electron localization function (ELF) analysis. DFT calculations predict that HfP 2 S 6 and α-Ag 4 P 2 S 6 would exhibit different optical performances regardless of being constructed from identical [P 2 S 6 ] motifs. HfP 2 S 6 exhibits a low second harmonic generation (SHG) response, ~0.21 × AGS (for the sample of particle size of 25 μm). α-Ag 4 P 2 S 6 possesses moderate SHG response, ~0.61 × AGS (for the sample of particle size of 225 μm) coupled with a high laser damage threshold (LDT) of ~3.2 × AGS. Characteristics of high ambient stability, moderate bandgap and SHG response, type-I phase-matching capability, and high LDT together with the easy growth of large crystals make α-Ag 4 P 2 S 6 attractive for future infrared nonlinear optical applications. Photocurrent measurements found that α-Ag 4 P 2 S 6 and β-Ag 4 P 2 S 6 have high photocurrent response, 165 nA cm -2 and 135 nA cm -2 , respectively. α-Ag 4 P 2 S 6 is a new multifunctional material of the ternary Ag–P–S system, which combines nonlinear optical (NLO) properties and photocurrent response.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extreme radiation damage in soil from Mare Fecunditatis.

High-voltage electron microscopy has been used to compare radiation effects in micron-size soil grains from the Luna 16 site (Mare Fecunditatis) and the four Apollo landing sites. Radiation damage by heavy solar particles is strikingly greater in the Luna 16 sample than in the other four samples. It is suggested that less movement of the soil at Mare Fecunditatis has taken place, perhaps because of its proximity to the limb and consequent lower exposure to energetic electrons in the earth's magnetospheric tail, which would cause electrostatic agitation of fine particles.

Phakey, P. P.↗

Structural correlates of imbibitional injury in Typha pollen

The ultrastructure of Typha latifolia pollen was examined as a function of pollen moisture content and incubation temperature, in order to identify possible lesions induced by imbibitional chilling. A syndrome of structural traits was found which characterizes damaged grains. Compared to viable grains, the protoplast of damaged pollen has a higher proportion of its volume occupied by vesicles, and less volume occupied by cytoplasm. Damaged grains also tend to have dilated cisternae of endoplasmic reticulum, larger starch grains and lipid bodies, poorly preserved mitochondria and membranes, and, sometimes, numerous electron-dense globules associated with membranes. The percentage of grains exhibiting this damage syndrome correlates closely with the number of ungerminated grains in most samples, regardless of moisture content or incubation temperature. Injury due to rapid imbibition from the dry state or to imbibitional chilling appear to be similar structurally, regardless of whether the stresses are imposed singly or together. The injury is not confined to one cell component (e.g., mitochondria), but may involve a generalized disruption of membranes. These results suggest that similar stress responses are elicited by imbibition from the dry state and by imbibitional chilling.

NASA Program Space Biology↗

Response of thyroid follicular cells to gamma irradiation compared to proton irradiation. I. Initial characterization of DNA damage, micronucleus formation, apoptosis, cell survival, and cell cycle phase redistribution

The RBE of protons has been assumed to be equivalent to that of photons. The objective of this study was to determine whether radiation-induced DNA and chromosome damage, apoptosis, cell killing and cell cycling in organized epithelial cells was influenced by radiation quality. Thyroid-stimulating hormone-dependent Fischer rat thyroid cells, established as follicles, were exposed to gamma rays or proton beams delivered acutely over a range of physical doses. Gamma-irradiated cells were able to repair DNA damage relatively rapidly so that by 1 h postirradiation they had approximately 20% fewer exposed 3' ends than their counterparts that had been irradiated with proton beams. The persistence of free ends of DNA in the samples irradiated with the proton beam implies that either more initial breaks or a quantitatively different type of damage had occurred. These results were further supported by an increased frequency of chromosomal damage as measured by the presence of micronuclei. Proton-beam irradiation induced micronuclei at a rate of 2.4% per gray, which at 12 Gy translated to 40% more micronuclei than in comparable gamma-irradiated cultures. The higher rate of micronucleus formation and the presence of larger micronuclei in proton-irradiated cells was further evidence that a qualitatively more severe class of damage had been induced than was induced by gamma rays. Differences in the type of damage produced were detected in the apoptosis assay, wherein a significant lag in the induction of apoptosis occurred after gamma irradiation that did not occur with protons. The more immediate expression of apoptotic cells in the cultures irradiated with the proton beam suggests that the damage inflicted was more severe. Alternatively, the cell cycle checkpoint mechanisms required for recovery from such damage might not have been invoked. Differences based on radiation quality were also evident in the alpha components of cell survival curves (0.05 Gy(-1) for gamma rays, 0.12 Gy(-1) for protons), which suggests that the higher level of survival of gamma-irradiated cells could be attributed to the persistence of nonlethally irradiated thyrocytes and/or the capacity to repair damage more effectively than cells exposed to equal physical doses of protons. The final assessment in this study was radiation-induced cell cycle phase redistribution. Gamma rays and protons produced a similar dose-dependent redistribution toward a predominantly G(2)-phase population. From our cumulative results, it seems likely that a majority of the proton-irradiated cells would not continue to divide. In conclusion, these findings suggest that there are quantitative and qualitative differences in the biological effects of proton beams and gamma rays. These differences could be due to structured energy deposition from the tracks of primary protons and the associated high-LET secondary particles produced in the targets. The results suggest that a simple dose-equivalent approach to dosimetry may be inadequate to compare the biological responses of cells to photons and protons.

NASA Discipline Radiation Health↗

Application of Laser Mass Spectrometry to Art and Archaeology

REMPI laser mass spectrometry is a combination of resonance enhanced multiphoton ionization spectroscopy and time of flight mass spectrometry, This technique enables the collection of mass specific optical spectra as well as of optically selected mass spectra. Analytes are jet-cooled by entrainment in a molecular beam, and this low temperature gas phase analysis has the benefit of excellent vibronic resolution. Utilizing this method, mass spectrometric analysis of historically relevant samples can be simplified and improved; Optical selection of targets eliminates the need for chromatography while knowledge of a target's gas phase spectroscopy allows for facile differentiation of molecules that are in the aqueous phase considered spectroscopically indistinguishable. These two factors allow smaller sample sizes than commercial MS instruments, which in turn will require less damage to objects of antiquity. We have explored methods to optimize REMPI laser mass spectrometry as an analytical tool to archaeology using theobromine and caffeine as molecular markers in Mesoamerican pottery, and are expanding this approach to the field of art to examine laccaic acid in shellacs.

Gulian, Lase Lisa E.↗

Comparison of Radiation-induced Damage Between Livers from Control and Chimeric Mice

Assessment of human health risks associated with space radiation exposure is based largely on the knowledge learned from studies in which animals, mostly rodents, are exposed to high-LET radiation on the ground. It has been recognized that translation of animal results to meaningful implications for human disease can be challenging, particularly for certain risk categories such as the high-LET radiation effects in the central nervous system (CNS). Considering limitations in utilizing non-human primates and clinical studies in humans, chimeric animals can potentially bridge the knowledge gap between rodents and humans. In a chimeric animal, a specific organ or a cell type is replaced with respective human cells that are functional. In this pilot study, we use PXB mice whose livers contain >90% human cells. These mice are exposed to gamma rays for investigations of DNA damage and transcriptomics changes in the humanized livers. Results obtained from PXB mice were compared non-engrafted control animals from the same background strain that are exposed to identical conditions. Staining of the liver tissues with H&E indicated that the human liver tissue in chimeric mice responds differently than the mouse liver tissue to gamma radiation on the cellular level, as evidenced by differences in inflammation and cellular damage seen on histopathology. The gene expression data collected from the liver samples will also be presented, which potentially offers an explanation for the differential responses.

Honglu Wu↗

Comparison of Radiation-Induced Damage Between Livers From Control and Chimeric Mice

Assessment of human health risks associated with space radiation exposure is based largely on the knowledge gained from studies in which animals, mostly rodents, are exposed to high-LET radiation on the ground. It has been recognized that translation of animal results to meaningful implications for human disease can be challenging, particularly for certain risk categories such as the high-LET radiation effects in the central nervous system (CNS). Considering limitations in utilizing non-human primates and clinical studies in humans, chimeric animals can potentially bridge the knowledge gap between rodents and humans. In a chimeric animal, a specific organ or a cell type is replaced with respective human cells that are functional. In this pilot study, we used PXB mice whose livers contain >90% human cells. These mice were exposed to gamma rays to investigate DNA damage and transcriptomics changes in the chimeric livers. Results obtained from PXB mice were compared to non-engrafted control animals from the same background strain that were exposed to identical conditions. Staining of the liver tissues with H&E indicated that the human liver tissue in chimeric mice responded differently than the mouse liver tissue to gamma radiation on the cellular level, as evidenced by differences in inflammation and cellular damage seen on histopathology. The gene expression data collected from the liver samples will also be presented, which potentially offers an explanation for the differential responses.

Honglu Wu↗

Comparison of Radiation-Induced Damage Between Livers From Control and Chimeric Mice

Assessment of human health risks associated with space radiation exposure is based largely on the knowledge gained from studies in which animals, mostly rodents, are exposed to high-LET radiation on the ground. It has been recognized that translation of animal results to meaningful implications for human disease can be challenging, particularly for certain risk categories such as the high-LET radiation effects in the central nervous system (CNS). Considering limitations in utilizing non-human primates and clinical studies in humans, chimeric animals can potentially bridge the knowledge gap between rodents and humans. In a chimeric animal, a specific organ or a cell type is replaced with respective human cells that are functional. In this pilot study, we used PXB mice whose livers contain >90% human cells. These mice were exposed to gamma rays to investigate DNA damage and transcriptomics changes in the chimeric livers. Results obtained from PXB mice were compared to non-engrafted control animals from the same background strain that were exposed to identical conditions. Staining of the liver tissues with H&E indicated that the human liver tissue in chimeric mice responded differently than the mouse liver tissue to gamma radiation on the cellular level, as evidenced by differences in inflammation and cellular damage seen on histopathology. The gene expression data collected from the liver samples will also be presented, which potentially offers an explanation for the differential responses.

Honglu Wu↗

Comparison of Radiation-Induced Damage Between Livers From Control and Chimeric Mice

Assessment of human health risks associated with space radiation exposure is based largely on the knowledge gained from studies in which animals, mostly rodents, are exposed to high-LET radiation on the ground. It has been recognized that translation of animal results to meaningful implications for human disease can be challenging, particularly for certain risk categories such as the high-LET radiation effects in the central nervous system (CNS). Considering limitations in utilizing non-human primates and clinical studies in humans, chimeric animals can potentially bridge the knowledge gap between rodents and humans. In a chimeric animal, a specific organ or a cell type is replaced with respective human cells that are functional. In this pilot study, we used PXB mice whose livers contain >90% human cells. These mice were exposed to gamma rays to investigate DNA damage and transcriptomics changes in the chimeric livers. Results obtained from PXB mice were compared to non-engrafted control animals from the same background strain that were exposed to identical conditions. Staining of the liver tissues with H&E indicated that the human liver tissue in chimeric mice responded differently than the mouse liver tissue to gamma radiation on the cellular level, as evidenced by differences in inflammation and cellular damage seen on histopathology. The gene expression data collected from the liver samples will also be presented, which potentially offers an explanation for the differential responses.

Honglu Wu↗

Shock recompaction of spall damage

Spall fracture is a high strain-rate damage phenomenon associated with shock or impulsive loading events. When a material that has been subjected to shock compression is allowed to release, rarefaction waves propagate into the sample and reduce the internal stress to zero. If multiple rarefaction waves intersect, they generate tension which, if sufficient, can nucleate voids in the material. It has been observed in several works investigating spall fracture that although the shock-wave profiles suggested spall occurred, imaging of the recovered sample revealed no voids or cracks. In this study, we aim to determine whether a second shock event could recompact existing spall damage, and if so, what form does the microstructure at the recompaction interface have? Through a series of gas-gun flyer-plate impact experiments, we demonstrate that modest shock stresses of 2 GPa–3 GPa are enough to both fully compact a damaged copper target back to a state of zero porosity and, furthermore, drive recrystallization of the interface such that there is a new bond formed where the free surfaces were brought together.

42 ENGINEERING↗