Search NASA⌕ Search

SEARCH · Search NASA

Results for “DISPLAY DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Ultrathin Co 3 O 4 Layers with Large Contact Area on Carbon Fibers as High-Performance Electrode for Flexible Zinc-Air Battery Integrated with Flexible Display

A facile and binder-free method is developed for the in situ and horizontal growth of ultrathin mesoporous Co 3 O 4 layers on the surface of carbon fibers in the carbon cloth (ultrathin Co 3 O 4 /CC) as high-performance air electrode for the flexible Zn-air battery. In particular, the ultrathin Co 3 O 4 layers have a maximum contact area on the conductive support, facilitating the rapid electron transport and preventing the aggregation of ultrathin layers. The ultrathin feature of Co 3 O 4 layers is characterized by the transmission electron microscopy, Raman spectra, and X-ray absorption fine structure spectroscopy. Benefiting from the high utilization degree of active materials and rapid charge transport, the mass activity for oxygen reduction and evolution reactions of the ultrathin Co 3 O 4 /CC electrode is more than 10 times higher than that of the carbon cloth loaded with commercial Co 3 O 4 nanoparticles. Compared to the commercial Co 3 O 4 /CC electrode, the flexible Zn-air battery using ultrathin Co 3 O 4 /CC electrode exhibits excellent rechargeable performance and high mechanical stability. Furthermore, the flexible Zn-air battery is integrated with a flexible display unit. The whole integrated device can operate without obvious performance degradation under serious deformation and even during the cutting process, which makes it highly promising for wearable and roll-up optoelectronics.

cobalt oxides↗

Method and Apparatus for Providing In-Flight Pilot Interface for Trajectory Optimization

Systems and methods of an in-cockpit flight trajectory modification system for an aircraft are provided. A receiver is capable of receiving flight-related hazard information. A traffic aware planner (TAP) module is operably connected to the receiver to receive the flight-related hazard information. A user interface device is operably connected to the TAP module on board the aircraft to provide trajectory information associated with the aircraft and to receive user input corresponding to a request for a revised trajectory. A TAP application is capable of calculating one or more revised trajectories for the aircraft based at least on active trajectory information of the aircraft and the flight-related hazard information. The user interface device may be configured to display information related to the one or more revised trajectories, including a graphic display of the active trajectory and at least one revised trajectory in a visualization panel of the user interface device.

Burke, Kelly Ann↗

Magnetic Fe3O4@TiO2 Nanoparticles-based Test Strip Immunosensing Device for Rapid Detection of Phosphorylated Butyrylcholinesterase

An integrated magnetic nanoparticles-based test-strip immunosensing device was developed for rapid and sensitive quantification of phosphorylated butyrylcholinesterase (BChE), the biomarker of exposure to organophosphous pesticides (OP), in human plasma. In order to overcome the difficulty in scarce availability of OP-specific antibody, here magnetic Fe3O4@TiO2 nanoparticles were used and adsorbed on the test strip through a small magnet inserted in the device to capture target OP-BChE through selective binding between TiO2 and OP moiety. Further recognition was completed by horseradish peroxidase (HRP) and anti-BChE antibody (Ab) co-immobilized gold nanoparticles (GNPs). Their strong affinities among Fe3O4@TiO2, OP-BChE and HRP/Ab-GNPs were characterized by quartz crystal microbalance (QCM), surface plasmon resonance (SPR) and square wave voltammetry (SWV) measurements. After cutting off from test strip, the resulted immunocomplex (HRP/Ab-GNPs/OP-BChE/Fe3O4@TiO2) was measured by SWV using a screen printed electrode under the test zone. Greatly enhanced sensitivity was achieved by introduction of GNPs to link enzyme and antibody at high ratio, which amplifies electrocatalytic signal significantly. Moreover, the use of test strip for fast immunoreactions reduces analytical time remarkably. Coupling with a portable electrochemical detector, the integrated device with advanced nanotechnology displays great promise for sensitive, rapid and in-filed on-site evaluation of OP poisoning.

biomarkers↗

Hydrothermal synthesis and tunable luminescence of CaSiO{sub 3}:RE{sup 3+}(RE{sup 3+} = Eu{sup 3+}, Sm{sup 3+}, Tb{sup 3+}, Dy{sup 3+}) nanocrystals

Highlights: • Near-spherical CaSiO{sub 3} nanocrystals were synthesized via a hydrothermal method. • The effect of calcination temperature on crystalline phase formation was discussed. • Optical properties of trivalent ions doped CaSiO{sub 3} nanocrystals were investigated. • Tunable luminescence of CaSiO{sub 3}:Tb{sup 3+}, Eu{sup 3+} can be achieved by a simple method. - Abstract: CaSiO{sub 3}:RE{sup 3+} (RE{sup 3+} = Eu{sup 3+}, Sm{sup 3+}, Tb{sup 3+}, Dy{sup 3+}) nanocrystals were prepared by facile hydrothermal method with further calcinations. The crystal structure and the effects of annealing temperature on phase transition have been characterized by X-ray diffraction (XRD). The photoluminescence (PL) and PL excitation (PLE) spectra were used to characterize the optical properties of all samples. The effect of Eu{sup 3+} and Sm{sup 3+} doping concentrations on the luminescent intensity were also investigated in details, respectively. Moreover, the luminescence colors of the Tb{sup 3+} and Eu{sup 3+} co-doped CaSiO{sub 3} samples can be tuned by simply adjusting the relative doping concentrations of the rare earth ions under a single wavelength excitation, which might find potential applications in the fields of light display systems and optoelectronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunable upconversion emission of Ho3+/Yb3+-doped single β-NaYF4 microrod

Highlights: • An intense red UC emission of Ho{sup 3+} ions was obtained in single NaYF{sub 4} microrod. • The UC emission of Ho{sup 3+} ions can be precisely turned via changing Ce{sup 3+} ion doped concentrations. • The UC mechanism and conversion efficiency were discussed. • The single NaYF{sub 4} microrod will have great potential applications in the laser. - Abstract: In this work, a series of hexagonal phase NaYF{sub 4}: Yb{sup 3+}/Ho{sup 3+} microrods have been successfully synthesized through hydrothermal methods, and their optical properties studied by a confocal microscope equipment with a 980 nm laser. An intense green and red upconversion emissions with candy-like emission pattern are observed from a single NaYF{sub 4}: Yb{sup 3+}/Ho{sup 3+} microrod. As the codoping Ce{sup 3+} ion concentrations increases from 0% to 12% in the microrods, the interesting phenomenon that fluorescence emission of Ho{sup 3+} ion is tuned green to red emission has been obtained. The red-to-green ratio emission of Ho{sup 3+} ions is enhanced about 11-fold, which is due to the two efficient cross-relaxation processes between Ho{sup 3+} and Ce{sup 3+} ions, which leading to the populations increase of the {sup 5}F{sub 5} state. The possible upconversion emission mechanisms are discussed based on the emission spectra of Ho{sup 3+} ions. The current study suggests that the NaYF{sub 4}: Yb{sup 3+}/Ho{sup 3+} microrods with the strong red upconversion emission may have great potential applications in micro-fiber laser, multicolor display, micro-optoelectronic device.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photonic curing of solution-deposited ZrO 2 dielectric on PEN: a path towards high-throughput processing of oxide electronics

High-throughput manufacturing of oxide electronics will enable new applications ranging from large-area displays to flexible medical devices and low-cost solar panels. However, high quality oxide films from solution-based precursors typically require 20 minutes or more of thermal annealing at high temperature (> 250 °C) for each layer, severely limiting both the throughput and substrate choice. Here, we report high speed photonic curing of ZrO 2 dielectric thin films on flexible plastic substrates. The curing and patterning processes can be achieved simultaneously by using shadow mask patterning or adjusting conditions to convert oxide only on top of underlying metal contacts, i.e. self-aligned patterning. Metal-insulator-metal capacitors using two layers of ZrO 2 films photonically cured in just 100 seconds per layer show non-dispersive capacitance-frequency behavior from 10 2 to 10 6 Hz, high areal capacitance of 200 nF/cm 2 and low dissipation factor of 0.03 at 10 5 Hz, leakage current density of ~ 10 -7 A/cm 2 at an applied field of 2 MV/cm, and a breakdown field of nearly 8 MV/cm. Using an upgraded tool, similar dielectric properties are achieved in as short as 100 milliseconds using a single pulse of light, revealing a pathway to oxide film processing beyond 30 m/min.

14 SOLAR ENERGY↗

Laser-Directed Hierarchical Assembly of Liquid Crystal Defects and Control of Optical Phase Singularities

Topological defect lines are ubiquitous and important in a wide variety of fascinating phenomena and theories in many fields ranging from materials science to early-universe cosmology, and to engineering of laser beams. However, they are typically hard to control in a reliable manner. Here we describe facile erasable 'optical drawing' of self-assembled defect clusters in liquid crystals. These quadrupolar defect clusters, stabilized by the medium's chirality and the tendency to form twisted configurations, are shaped into arbitrary two-dimensional patterns, including reconfigurable phase gratings capable of generating and controlling optical phase singularities in laser beams. Our findings bridge the studies of defects in condensed matter physics and optics and may enable applications in data storage, singular optics, displays, electro-optic devices, diffraction gratings, as well as in both optically- and electrically-addressed pixel-free spatial light modulators.

36 MATERIALS SCIENCE↗

Influence of sputtering power on the optical properties of ITO thin films

Tin doped indium oxide films are widely used in transparent conducting coatings such as flat panel displays, crystal displays and in optical devices such as solar cells and organic light emitting diodes due to the high electrical resistivity and optical transparency in the visible region of solar spectrum. The deposition parameters have a commendable influence on the optical and electrical properties of the thin films. In this study, ITO thin films were prepared by RF magnetron sputtering. The properties of the films prepared under varying sputtering power were compared using UV- visible spectrophotometry. Effect of sputtering power on the energy band gap, absorption coefficient and refractive index are investigated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Field emission properties of ZnO nanosheet arrays

Electron emission properties of electrodeposited ZnO nanosheet arrays grown on Indium tin oxide coated glass substrates have been studied. Influence of oxygen vacancies on electronic structures and field emission properties of ZnO nanosheets are investigated using density functional theory. The oxygen vacancies produce unshared d electrons which form an impurity energy state; this causes shifting of Fermi level towards the vacuum, and so the barrier energy for electron extraction reduces. The ZnO nanosheet arrays exhibit a low turn-on field of 2.4 V/μm at 0.1 μA/cm{sup 2} and current density of 50.1 μA/cm{sup 2} at an applied field of 6.4 V/μm with field enhancement factor, β = 5812 and good field emission current stability. The nanosheet arrays grown by a facile electrodeposition process have great potential as robust high performance vertical structure electron emitters for future flat panel displays and vacuum electronic device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Topological transformations of Hopf solitons in chiral ferromagnets and liquid crystals

Significance While arising in theories in many branches of science, from particle physics to condensed matter and cosmology, stable three-dimensional topological solitons remained experimentally elusive until very recently. We now show that such solitons can be electrically and magnetically switched between states with the same or different Hopf indices. Richness and robustness of this switching promise technological applications in the new breeds of information displays and data storage devices, as well as may provide a test ground and new inspirations for the mathematical knot theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Near room-temperature direct encapsulation of organic photovoltaics by plasma-based deposition techniques

Plasma-assisted atomic layer deposition (ALD) is used for the deposition of environmental barriers directly onto organic photovoltaic devices (OPVs) at near room temperature (30 °C). To study the effect of the ALD process on the organic materials forming the device, the precursor diffusion and intermixing at the interface during the growth of different plasma-assisted ALD inorganic barriers (i.e. Al 2 O 3 and TiO 2 ) onto the organic photoactive layer (P3HT:ICBA) was investigated in this paper. Depth profile x-ray photoelectron spectroscopy was used to analyze the composition of the organic/inorganic interface to investigate the infiltration of the plasma-assisted ALD precursors into the photoactive layer as a function of the precursor dimension, the process temperature, and organic layer morphology. The free volume in the photoactive layer accessible to the ALD precursor was characterized by means of ellipsometric porosimetry (EP) and spectroscopic ellipsometry as a function of temperature. The organic layer is shown to exhibit free volume broadening at high temperatures, increasing the infiltration depth of the ALD precursor into the photoactive layer. Furthermore, based on previous investigations, the intrinsic permeation properties of the inorganic layers deposited by plasma-assisted ALD were predicted from the nano-porosity content as measured by EP and found to be in the 10 -6 gm -2 d -1 range. Insight from our studies was used to design and fabricate multilayer barriers synthesized at near-room temperature by plasma-assisted ALD in combination with plasma-enhanced CVD onto organic photovoltaic (OPVs) devices. Finally, encapsulated OPVs displayed shelf-lifetimes up to 1400 h at ambient conditions.

14 SOLAR ENERGY↗

Collaborative Visualization: Definition, Challenges, and Research Agenda

Collaborative visualization has emerged as a new research direction which offers the opportunity to reach new audiences and application areas for visualization tools and techniques. Technology now allows us to easily connect and collaborate with one another - in settings as diverse as over networked computers, across mobile devices, or using shared displays such as interactive walls and tabletop surfaces. Any of these collaborative settings carries a set of challenges and opportunities for visualization research. Digital information is already regularly accessed by multiple people together in order to share information, to view it together, to analyze it, or to form decisions. However, research on how to best support collaboration with and around visualizations is still in its infancy and has so far focused only on a small subset of possible application scenarios. The purpose of this article is (1) to provide a clear scope, definition, and overview of the evolving field of collaborative visualization, (2) to help pinpoint the unique focus of collaborative visualization with its specific aspects, challenges, and requirements within the intersection of general computer-supported collaborative work (CSCW) and visualization research, and (3) to draw attention to important future research questions to be addressed by the community. Thus, the goal of the paper is to discuss a research agenda for future work on collaborative visualization, including our vision for how to meet the grand challenge and to urge for a new generation of visualization tools that were designed with collaboration in mind from their very inception.

99 GENERAL AND MISCELLANEOUS↗

Recent Progress in Transparent Conductive Materials for Photovoltaics

Transparent conducting materials (TCMs) are essential components for a variety of optoelectronic devices, such as photovoltaics, displays and touch screens. In recent years, extensive efforts have been made to develop TCMs with both high electrical conductivity and optical transmittance. Based on material types, they can be mainly categorized into the following classes: metal oxides, metal nanowire networks, carbon-material-based TCMs (graphene and carbon nanotube networks) and conjugated conductive polymers (PEDOT:PSS). This review will discuss the fundamental electrical and optical properties, typical fabrication methods and the applications in solar cells for each class of TCMs and highlight the current challenges and potential future research directions.

14 SOLAR ENERGY↗

Techniques for delineation and portrayal of land cover types using ERTS-1 data

The author has identified the following significant results. ERTS data was used to map land cover in agricultural areas, although in some parts of Pennsylvania, with small irregular fields, many of the pixels overlap field boundaries and cause difficulties in classification. Various techniques and devices were used to display the results of these land cover analyses. The most promising approach would be a user-interactive color monitor interfaced with a large computer so that classification results could be displayed on the CRT and these results output by a hard complete copier.

Mcmurtry, G. J.↗

Curve tracer checks CMOS IC's

Conventional transistor curve tracer can speed up failure analysis of CMOS integrated circuits by displaying transfer characteristics while device is subjected to vibration or environmental testing. Failures that show up as change in threshold voltage or transfer characteristics are quickly detected.

Kizer, F.↗

UNIBUS monitor for PDP 11

A UNIBUS monitor was designed and constructed to facilitate development of hardware interfaces with the PDP 11 minicomputer. The monitor provides useful displays of UNIBUS conditions and provides the user with a flexible diagnostic tool. It can also serve as a simple display and data entry device, permitting extremely simple input/output (I/O) for development software. At this time, the monitor is being used with the DSN planetary radar system, which uses a PDP 11.

Donner, M. D.↗

Integrated avionics for future general aviation aircraft

The program described was initiated in 1975 to provide the critical information for the design of an advanced avionics system suitable for general aviation. Emphasis is on the use of data busing, distributed microsensors, shared electronic displays and pilot entry devices, innovative low-cost sensors, and improved functional characteristics. Design considerations include cost, reliability, maintainability, and modularity.

Denery, D. G.↗

A Demonstration Advanced Avionics System for general aviation

A program initiated within NASA has emphasized the use of a data bus, microprocessors, electronic displays and data entry devices for general aviation. A Demonstration Advanced Avionics System (DAAS) capable of evaluating critical and promising elements of an integrating system that will perform the functions of (1) automated guidance and navigation; (2) flight planning; (3) weight and balance performance computations; (4) monitoring and warning; and (5) storage of normal and emergency check lists and operational limitations is described. Consideration is given to two major parts of the DAAS instrument panel: the integrated data control center and an electronic horizontal situation indicator, and to the system architecture. The system is to be installed in the Ames Research Center's Cessna 402B in the latter part of 1980; engineering flight testing will begin in the first part of 1981.

Denery, D. G.↗