Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC COMPRESSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Contrasting c -axis and in-plane uniaxial stress effects on superconductivity and stripe order in La 1.885 Ba 0.115 CuO 4

The cuprate superconductor La 2−x Ba x CuO 4 (LBCO) near x = 0.125 is a striking example of intertwined electronic orders, where 3D superconductivity is anomalously suppressed, allowing spin and charge stripe order to develop. Understanding this interplay remains a key challenge in cuprates, highlighting the necessity of external tuning for deeper insight. While in-plane uniaxial stress enhances superconductivity and suppresses stripe order, the effects of c -axis compression remains largely unexplored. Here, we use muon spin rotation ( μ SR) and AC susceptibility with an in situ piezoelectric stress device to investigate the spin-stripe order and superconductivity in LBCO-0.115 under c-axis compression. The measurements reveal a gradual suppression of the superconducting transition temperature ( T c ) with increasing c -axis stress, in stark contrast to the strong enhancement observed under in-plane stress. We further show that while in-plane stress rapidly reduces both the magnetic volume fraction ( V m ) and the spin-stripe ordering temperature ( T so ), c-axis compression has no effect, with V m and T so exhibiting an almost unchanged behavior up to the highest applied stress of 0.21 GPa. These findings demonstrate a strong anisotropy in stress response.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterisation of magnesium potassium phosphate cements blended with fly ash and ground granulated blast furnace slag

Magnesium potassium phosphate cements (MKPCs), blended with 50 wt.% fly ash (FA) or ground granulated blast furnace slag (GBFS) to reduce heat evolution, water demand and cost, were assessed using compressive strength, X-ray diffraction (XRD), scanning electron microscopy (SEM) and nuclear magnetic resonance (NMR) spectroscopy on {sup 25}Mg, {sup 27}Al, {sup 29}Si, {sup 31}P and {sup 39}K nuclei. We present the first definitive evidence that dissolution of the glassy aluminosilicate phases of both FA and GBFS occurred under the pH conditions of MKPC. In addition to the main binder phase, struvite-K, an amorphous orthophosphate phase was detected in FA/MKPC and GBFS/MKPC systems. It was postulated that an aluminium phosphate phase was formed, however, no significant Al–O–P interactions were identified. High-field NMR analysis of the GBFS/MKPC system indicated the potential formation of a potassium-aluminosilicate phase. This study demonstrates the need for further research on these binders, as both FA and GBFS are generally regarded as inert fillers within MKPC.

36 MATERIALS SCIENCE↗

Laminar and Turbulent Dynamos in Chiral Magnetohydrodynamics. I. Theory

The magnetohydrodynamic (MHD) description of plasmas with relativistic particles necessarily includes an additional new field, the chiral chemical potential associated with the axial charge (i.e., the number difference between right- and left-handed relativistic fermions). This chiral chemical potential gives rise to a contribution to the electric current density of the plasma ( chiral magnetic effect ). We present a self-consistent treatment of the chiral MHD equations , which include the back-reaction of the magnetic field on a chiral chemical potential and its interaction with the plasma velocity field. A number of novel phenomena are exhibited. First, we show that the chiral magnetic effect decreases the frequency of the Alfvén wave for incompressible flows, increases the frequencies of the Alfvén wave and of the fast magnetosonic wave for compressible flows, and decreases the frequency of the slow magnetosonic wave. Second, we show that, in addition to the well-known laminar chiral dynamo effect, which is not related to fluid motions, there is a dynamo caused by the joint action of velocity shear and chiral magnetic effect. In the presence of turbulence with vanishing mean kinetic helicity, the derived mean-field chiral MHD equations describe turbulent large-scale dynamos caused by the chiral alpha effect, which is dominant for large fluid and magnetic Reynolds numbers. The chiral alpha effect is due to an interaction of the chiral magnetic effect and fluctuations of the small-scale current produced by tangling magnetic fluctuations (which are generated by tangling of the large-scale magnetic field by sheared velocity fluctuations). These dynamo effects may have interesting consequences in the dynamics of the early universe, neutron stars, and the quark–gluon plasma.

79 ASTRONOMY AND ASTROPHYSICS↗

Integrated simulations of premagnetized and self-magnetizing dynamic screw pinch-driven MagLIF

Magnetically driven implosions such as in magnetized liner inertial fusion (MagLIF) on the Z accelerator suffer from magneto-Rayleigh–Taylor instabilities (MRTI) that dynamically redistribute liner mass during implosion, limiting fusion fuel compression and confinement, which ultimately degrades performance. Driving the implosion with an initially helical drive field that dynamically shifts the direction of the magnetic field surrounding the liner (i.e., a dynamic screw pinch, DSP) is a method proposed to mitigate MRTI in-flight and improve target performance. In DSPs, the axial drive magnetic field component implodes the liner and diffuses through the shocked, melted liner material into the fuel throughout the implosion. Liners can be designed to enable enough axial magnetic flux to diffuse through the liner material to effectively magnetize the fuel region without the need of an initial axial magnetic field (i.e., from external field coils). We present results from three-dimensional radiation-magnetohydrodynamic simulations of MagLIF implosions employing drive magnetic fields composed of axial and azimuthal components (a helical drive field). These simulated DSP-driven MagLIF targets demonstrate improved fuel conditions and thermonuclear yield compared to a traditional MagLIF target implosion. Synthetic x-ray radiography of the imploding liner material and x-ray emission images of the fuel region at the time of peak neutron yield rate indicate superior implosion morphology for DSP-MagLIF implosions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Velocity Anisotropy in Self-gravitating Molecular Clouds. I. Simulation

The complex interplay between turbulence, magnetic fields, and self-gravity leads to the formation of molecular clouds out of the diffuse interstellar medium (ISM). One avenue of studying this interplay is by analyzing statistical features derived from observations, where the interpretation of these features is greatly facilitated by comparisons with numerical simulations. Here we focus on the statistical anisotropy present in synthetic maps of velocity centroid data, which we derive from three-dimensional magnetohydrodynamic simulations of a turbulent, magnetized, self-gravitating patch of ISM. We study how the orientation and magnitude of the velocity anisotropy correlate with the magnetic field and with the structures generated by gravitational collapse. Motivated by recent observational constraints, our simulations focus on the supersonic (sonic Mach number M≈2--17) but sub- to trans-alfvénic (alfvénic Mach number M{sub A}≈0.2--1.2) turbulence regime, and we consider clouds that are barely to mildly magnetically supercritical (mass-to-flux ratio equal to once or twice the critical value). Additionally we explore the impact of the turbulence driving mechanism (solenoidal or compressive) on the velocity anisotropy. While we confirm previous findings that the velocity anisotropy generally aligns well with the plane-of-sky magnetic field, our inclusion of the effects of self-gravity reveals that in regions of higher column density, the velocity anisotropy may be destroyed or even reoriented to align with the gravitationally formed structures. We provide evidence that this effect is not necessarily due to the increase of M{sub A} inside the high-density regions.

79 ASTRONOMY AND ASTROPHYSICS↗

The electronic and magnetic properties of quaternary Heusler alloy CoFeMnGe

We present study of quaternary Heusler alloy CoFeMnGe using density functional theory. The compound is half-metallic with half-metallic gap of 0.13 eV. The total magnetic moment of this compound is 3.96 μ{sub B} which is in close agreement with Slater-Pauling rule. The effect of lattice compression and expansion shows the robustness of half-metallicity. A large value of half-metallic gap and 100% spin-polarization makes this material interesting for spin dependent applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Direct Observations of Particle Dynamics in Magnetized Collisionless Shock Precursors in Laser-Produced Plasmas

We present the first laboratory observations of time-resolved electron and ion velocity distributions in magnetized collisionless shock precursors. Thomson scattering of a probe laser beam was used to observe the interaction of a laser-driven, supersonic piston plasma expanding through an ambient plasma in an external magnetic field. From the Thomson-scattered spectra we measure time-resolved profiles of electron density, temperature, and ion flow speed, as well as spatially resolved magnetic fields from proton radiography. We observe direct evidence of the coupling between piston and ambient plasmas, including the acceleration of ambient ions driven by magnetic and pressure gradient electric fields, and deformation of the piston ion flow, key steps in the formation of magnetized collisionless shocks. Even before a shock has fully formed, we observe strong density compressions and electron heating associated with the pileup of piston ions. Furthermore, the results demonstrate that laboratory experiments can probe particle velocity distributions relevant to collisionless shocks, and can complement, and in some cases overcome, the limitations of similar measurements undertaken by spacecraft missions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

THE LAUNCHING OF COLD CLOUDS BY GALAXY OUTFLOWS. II. THE ROLE OF THERMAL CONDUCTION

We explore the impact of electron thermal conduction on the evolution of radiatively cooled cold clouds embedded in flows of hot and fast material as it occurs in outflowing galaxies. Performing a parameter study of three-dimensional adaptive mesh refinement hydrodynamical simulations, we show that electron thermal conduction causes cold clouds to evaporate, but it can also extend their lifetimes by compressing them into dense filaments. We distinguish between low column-density clouds, which are disrupted on very short times, and high-column density clouds with much longer disruption times that are set by a balance between impinging thermal energy and evaporation. We provide fits to the cloud lifetimes and velocities that can be used in galaxy-scale simulations of outflows in which the evolution of individual clouds cannot be modeled with the required resolution. Moreover, we show that the clouds are only accelerated to a small fraction of the ambient velocity because compression by evaporation causes the clouds to present a small cross-section to the ambient flow. This means that either magnetic fields must suppress thermal conduction, or that the cold clouds observed in galaxy outflows are not formed of cold material carried out from the galaxy.

79 ASTRONOMY AND ASTROPHYSICS↗

Understanding the microstructural evolution of hypersaline cemented paste backfill with low-field NMR relaxation

Highlights: • Microstructural evolution of CPB, prepared with tap and hypersaline water, is monitored using low-field NMR relaxometry. • T{sub 1} and T{sub 2} NMR relaxation measurements compared with mechanical strength via UCS tests • Hypersaline mixing water results in slower structural evolution and lower mechanical strength. Cemented paste backfill (CPB) comprising mineral tailings, binders and mixing water is an important potential support material in the mining industry. As the mechanical properties of CPB are significantly influenced by its microstructural characteristics the development of measurement tools to better understand its pore structure evolution is important for its increased utilisation. This study reports the application of low-field nuclear magnetic resonance (NMR) relaxation time measurements to characterise the microstructural evolution of CPB materials over 56 days of hydration, contrasting common tap water and hypersaline water (~22 wt% salt) as mixing water. Distinct NMR relaxation time populations were evidenced within each CPB sample, revealing the presence of both capillary (T{sub 1,2} ≈ 10 ms) and gel pore water (T{sub 1,2} ≈ 300–500 μs), with time-dependent relaxation measurements facilitating characterisation of capillary pore structure evolution over the hydration period assessed. Hypersaline samples demonstrated a time-lag in this measured capillary pore evolution, relative to those hydrated with tap water, while pore structure evolution rates were observed to increase with increased CPB binder content. Further, both T{sub 1} and T{sub 2} NMR relaxation times were found to correlate with the uniaxial compressive strength of the CPB materials investigated, facilitating the formulation of a predictive correlation function between NMR relaxation characteristics and mechanical properties.

36 MATERIALS SCIENCE↗

High-Fidelity Analysis of ULF Wave Mode Structure Following Interplanetary Shock Compression of the Dayside Magnetopause Using MMS Multi-Point Observations

During the 9 March 2018 event with two consecutive interplanetary shocks compressing the dayside magnetosphere, the azimuthal mode structure and frequency spectrum of ultra low frequency magnetic pulsations are resolved using a cross-spectral analysis based on high-fidelity multi-probe Magnetospheric Multiscale Mission (MMS) magnetometer data. The results based on the MMS 4 and MMS 3 pair of measurements show that shock arrival leads to low mode (|m| ≤ 3) magnetic fluctuations in the Pc4-5 regimes, and smaller spatial scale fluctuations implied by the dominant high mode numbers are observed after both shock signatures hit and passed the magnetosphere. Detailed evolution of the mode structure is also shown for the first shock to reveal the development of high mode structure from a bump-on-tail distribution at m≈20 to a dominant peak at m≈50 in about 10 min. In addition, an interesting change of sign in m from negative to positive is observed as MMS crosses ~11 MLT pre-noon, which is consistent with the picture of wave generation by dayside magnetopause compression and then anti-sunward propagation. Finally, for both shocks, the contribution of higher frequency waves (Pc-4 range compared with Pc-5) to the total wave power is found to be negligible before and after the shock impact, but it becomes more significant during the shock impact.

79 ASTRONOMY AND ASTROPHYSICS↗

Autogenous shrinkage and hydration property of alkali activated slag pastes containing superabsorbent polymer

In this paper, the superabsorbent polymer (SAP) was applied as internal curing agent to study its effect on the autogenous shrinkage and hydration property of alkali activated slag (AAS) pastes. Liquid absorption and release processes of SAP in AAS pastes were characterized by {sup 1}H nuclear magnetic resonance ({sup 1}H NMR). Moreover, the microstructure and mechanical strength of AAS pastes containing SAP were also revealed. The results showed that the autogenous shrinkage of AAS pastes containing SAP was reduced by about 80.6%, 72.1% and 72.6%, respectively as the silicate modulus (Ms) increased from 0.8 to 1.4. The addition of SAP delayed the second exothermic peak, but increased the cumulative heat of AAS pastes. In addition, internal curing by SAP could promote the generation of C-A-S-H gels and hydrotalcite-like phases and increase the reaction degree of slag, particularly for AAS pastes with higher Ms, being attributed to the continuous release of entrained water and alkali activator solutions in SAP with the increase of hydration time. Furthermore, the addition of SAP would increase capillary pore size and pore volume of AAS pastes, and thus lead to the decrease of compressive strength.

36 MATERIALS SCIENCE↗

Metal-insulator transition and magnetism of SU(3) fermions in the square lattice

We study the SU(3) symmetric Fermi-Hubbard model (FHM) in the square lattice at 1/3-filling using numerically exact determinant quantum Monte Carlo and numerical linked-cluster expansion techniques. We present the different regimes of the model in the T–U plane, which are characterized by local and short-range correlations, and capture signatures of the metal-insulator transition and magnetic crossovers. These signatures are detected as the temperature scales characterizing the rise of the compressibility, and an interaction-dependent change in the sign of the diagonal spin-spin correlation function. The analysis of the compressibility estimates the location of the metal-insulator quantum critical point at U c /t ~ 6, and provides a temperature scale for observing Mott physics at finite T. Furthermore, from the analysis of the spin-spin correlation function we observe that for U/t ≳ 6 and T ~ J = 4⁢t 2 /U there is a development of a short-range two-sublattice (2SL) antiferromagnetic structure, as well as an emerging three-sublattice (3SL) antiferromagnetic structure as the temperature is lowered below T/J ≲ 0.57. This crossover from 2SL to 3SL magnetic ordering agrees with Heisenberg limit predictions, and has observable effects on the density of on-site pairs. Finally, we describe how the features of the regimes in the T–U plane can be explored with alkaline-earth-like atoms in optical lattices with currently achieved experimental techniques and temperatures. Furthermore, the results discussed in this paper provide a starting point for the exploration of the SU(3) FHM upon doping.

74 ATOMIC AND MOLECULAR PHYSICS↗

Arbitrary amplitude electrostatic wave propagation in a magnetized dense plasma containing helium ions and degenerate electrons

The obliquely propagating arbitrary amplitude electrostatic wave is studied in a dense magnetized plasma having singly and doubly charged helium ions with nonrelativistic and ultrarelativistic degenerate electrons pressures. The Fermi temperature for ultrarelativistic degenerate electrons described by N. M. Vernet [(Cambridge University Press, Cambridge, 2007), p. 57] is used to define ion acoustic speed in ultra-dense plasmas. The pseudo-potential approach is used to solve the fully nonlinear set of dynamic equations for obliquely propagating electrostatic waves in a dense magnetized plasma containing helium ions. The upper and lower Mach number ranges for the existence of electrostatic solitons are found which depends on the obliqueness of the wave propagation with respect to applied magnetic field and charge number of the helium ions. It is found that only compressive (hump) soliton structures are formed in all the cases and only subsonic solitons are formed for a singly charged helium ions plasma case with nonrelativistic degenerate electrons. Both subsonic and supersonic soliton hump structures are formed for doubly charged helium ions with nonrelativistic degenerate electrons and ultrarelativistic degenerate electrons plasma case containing singly as well as doubly charged helium ions. The effect of propagation direction on the soliton amplitude and width of the electrostatic waves is also presented. The numerical plots are also shown for illustration using dense plasma parameters of a compact star (white dwarf) from literature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A CIRCULAR-CYLINDRICAL FLUX-ROPE ANALYTICAL MODEL FOR MAGNETIC CLOUDS

We present an analytical model to describe magnetic flux-rope topologies. When these structures are observed embedded in Interplanetary Coronal Mass Ejections (ICMEs) with a depressed proton temperature, they are called Magnetic Clouds (MCs). Our model extends the circular-cylindrical concept of Hidalgo et al. by introducing a general form for the radial dependence of the current density. This generalization provides information on the force distribution inside the flux rope in addition to the usual parameters of MC geometrical information and orientation. The generalized model provides flexibility for implementation in 3D MHD simulations. Here, we evaluate its performance in the reconstruction of MCs in in situ observations. Four Earth-directed ICME events, observed by the Wind spacecraft, are used to validate the technique. The events are selected from the ICME Wind list with the magnetic obstacle boundaries chosen consistently with the magnetic field and plasma in situ observations and with a new parameter (EPP, the Electron Pitch angle distribution Parameter) which quantifies the bidirectionally of the plasma electrons. The goodness of the fit is evaluated with a single correlation parameter to enable comparative analysis of the events. In general, at first glance, the model fits the selected events very well. However, a detailed analysis of events with signatures of significant compression indicates the need to explore geometries other than the circular-cylindrical. An extension of our current modeling framework to account for such non-circular CMEs will be presented in a forthcoming publication.

79 ASTRONOMY AND ASTROPHYSICS↗

Global Hybrid Simulations of Interaction Between Interplanetary Rotational Discontinuity and Bow Shock/Magnetosphere: Can Ion-Scale Magnetic Reconnection be Driven by Rotational Discontinuity Downstream of Quasi-Parallel Shock?

Ion-scale magnetic reconnection has been observed downstream of the terrestrial quasi-parallel (Q-∥) shock. Whether it is driven by interplanetary discontinuities or turbulent Q-∥ shock, however, is unclear. Using three-dimensional global hybrid simulation, we investigate the generation of magnetic reconnection downstream of the Q-∥ shock, while an interplanetary rotational discontinuity (RD) is launched to the bow shock. Cases with various solar wind Alfvén Mach numbers, M A = 3.0 to 8, and propagation directions of the RD are presented. The propagation direction n is assumed to be in the GSE xz plane and pointing earthward, with n = (-sin(θ 12 /2),0,-cos(θ 12 /2)), where θ 12 is the angle between the upstream (B1) and downstream (B2) magnetic fields across the transmitted RD. It is found that magnetic reconnection occurs inside the RD downstream of the Q-∥ shock, forming flux ropes extending along the dawn-dusk direction about tens of ion inertial lengths. Large-amplitude low-frequency waves originated from the Q-∥ shock lead to the bending and squeezing of the field lines around the RD, which play an important role in triggering reconnection inside the RD. As the RD impacts the dayside magnetopause, magnetopause reconnection takes place between the field lines behind the RD and geomagnetic field lines. Nevertheless, no reconnection is found downstream of the Q-∥ shock itself or outside the RD in the magnetosheath. The existent and structure of reconnection in the magnetosheath are found to strongly depend on the parameters M A and n. Our simulation shows that ion-scale magnetic reconnection is driven by an external driver in the form of the compression of an RD around the bow shock and in the magnetosheath, rather than caused by the turbulent Q-∥ shock alone.

79 ASTRONOMY AND ASTROPHYSICS↗

Spin-splitting in p-type Ge devices

Compressively strained Ge quantum well devices have a spin-splitting in applied magnetic field that is entirely consistent with a Zeeman effect in the heavy hole valence band. The spin orientation is determined by the biaxial strain in the quantum well with the relaxed SiGe buffer layers and is quantized in the growth direction perpendicular to the conducting channel. The measured spin-splitting in the resistivity ρ{sub xx} agrees with the predictions of the Zeeman Hamiltonian where the Shubnikov-deHaas effect exhibits a loss of even filling factor minima in the resistivity ρ{sub xx} with hole depletion from a gate field, increasing disorder or increasing temperature. There is no measurable Rashba spin-orbit coupling irrespective of the structural inversion asymmetry of the confining potential in low p-doped or undoped Ge quantum wells from a density of 6 × 10{sup 10} cm{sup −2} in depletion mode to 1.7 × 10{sup 11} cm{sup −2} in enhancement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pressure-induced structural dimerization in the hyperhoneycomb iridate β - Li 2 IrO 3 at low temperatures

A pressure-induced collapse of magnetic ordering in β-Li 2 IrO 3 at P m similar to 1.5-2 GPa has previously been interpreted as evidence for potential emergence of spin liquid states in this hyperhoneycomb iridate, raising prospects for experimental realizations of the Kitaev model. Based on structural data obtained at room temperature, this magnetic transition is believed to originate in small lattice perturbations that preserve crystal symmetry, and related changes in bond-directional anisotropic exchange interactions. In this work, we report on the evolution of the crystal structure of β-Li 2 IrO 3 under pressure at low temperatures (T ≤ 50 K) and show that the suppression of magnetism coincides with a change in lattice symmetry involving Ir-Ir dimerization. The critical pressure for dimerization shifts from 4.4(2) GPa at room temperature to similar to 1.5-2 GPa below 50 K. While a direct Fddd → C-2/c transition is observed at room temperature, the low temperature transitions involve new as well as coexisting dimerized phases. Additional investigation of the Ir (L 3 /L 2 ) isotropic branching ratio in x-ray absorption spectra indicates that the previously reported departure of the electronic ground state from a J eff = 1/2 state is closely related to the onset of dimerized phases. In essence, our results suggest that the predominant mechanism driving the collapse of magnetism in β-Li 2 IrO 3 is the pressure-induced formation of Ir 2 dimers in the hyperhoneycomb network. The results further confirm the instability of the J eff = 1/2 moments and related noncollinear spiral magnetic ordering against formation of dimers in the low-temperature phase of compressed β-Li 2 IrO 3 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fluid-phase helium: Shock-compression experiments, quantum molecular dynamics simulations, and development of an equation of state

Helium (He) plays a critical role in numerous areas ranging from the study of celestial objects like brown dwarfs and gas giants to modern-day technologies like nuclear energy and rocket propulsion. For many of these applications, it is essential to have a reliable equation of state (EOS) for He that yields an accurate representation of its thermodynamic behavior. To help constrain and develop such EOS models, we have performed a series of shock-compression experiments on cryogenic liquid He to pressures exceeding 100 GPa using a magnetically accelerated flyer plate on Sandia National Laboratories' Z-machine. We have also performed quantum molecular dynamics simulations that are consistent with our shock measurements. None of the previously available EOSs agree with our experimental and simulation results, motivating the development of a fluid-phase He EOS that we present in this study. Here, we show that our EOS yields good agreement with published data that span temperatures and pressures encountered across a diverse array of applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗