Search NASA⌕ Search

SEARCH · Search NASA

Results for “Particle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Particle size effect of graphite anodes on performance of fast charging Li-ion batteries

Charging energy-dense lithium-ion batteries (LIBs) with thick graphite electrodes at high current densities are typically accompanied by poor performance and safety issues. The root cause is the onset of Li plating at the surface of graphite when lithiated to a high capacity within a short time period. Here, we investigated the behavior of graphite electrodes with various particle sizes under fast charge operations. Results from the electrochemical characterization on graphite electrodes exhibit the superiority of smaller particles over bigger particles in terms of suppressing the onset of Li plating and growth of plated Li particles. Observations from scanning electron microscopy also corroborate the presence of plated Li in electrodes with big graphite particles and its absence in graphite electrodes with small particles, when the cells were lithiated to 90% of the state of charge (SOC). Further, the improved performance of cells with the small particles might be associated with the low Li-ion concentration at the surface of graphite and thus reduced overpotential in graphite electrodes. The simulated results revealed that, compared to bigger particles, smaller particles have lower surface intercalation at any given cell SOC, which may significantly reduce the overpotential in the graphite electrodes and mitigate the onset of Li plating. This agrees well with experimental observations.

25 ENERGY STORAGE↗
DOE OSTI2022

Designing a Particle Flow Control Apparatus

Flow control within a particle-based Concentrated Solar Power (CSP) system is essential in determining the heat transfer coefficient, and therefore, the power generation capability of these systems. There are three areas where particle flow control is significant: the receivers, storage tanks, and particle-sCO2 heat exchangers. The focus of this work is on designing a new mechanism to control the flow in the particle-sCO2 heat exchangers due to the simplicity and potential cost savings when compared to the other areas of interest. The goal is for this new design to have quicker response times in terms of particle flowrate than a slide gate or flow control valve, which are designs currently used. The design resembles that of a chuck mechanism within a drill where a rotation of the sleeve elicits movement of the jaws both vertically and horizontally to close the outlet area of the nozzle. Additionally, this design will utilize the current actuator that is already used within these heat exchangers to reduce the complexity of implementation. The jaws are designed to be closed at an angle of 76˚ which is just slightly steeper than the hopper leading to the mechanism. Furthermore, this design can be tuned to limit particle bridging and other particle flow phenomena that result in blockages. The prototypes were 3D printed out of polylactic acid (PLA) and scaled up to 100%, 200%, and 400% to be able to observe the velocity profiles of the mechanism more clearly. Experiments are performed with this prototype to compare the inlet and outlet mass flow rates at different configurations of the jaws. The particles used in these experiments are 0.3mm HSP 40/70 that are commonly used in particle-based CSP systems.

14 SOLAR ENERGY↗
DOE OSTI2023

Vertical distribution of boundary layer new particle formation and implications for nanoparticle growth mechanisms (Final Report)

New particles can form high above ground in the atmosphere before such formation events are observed by ground-based instruments. Once formed, these particles can take up significant amounts of water vapor, which has implications on the mechanisms by which nanoparticles grow and, ultimately, impact cloud formation processes. These observations motivated the research performed in this project using a combination of modeling, laboratory experiments, and the analysis of field observations. We hypothesized is that ground-based measurements do not always accurately represent the location and timing of new particle formation events, nor do they adequately characterize the dominant physical and chemical processes that are responsible for the subsequent growth of newly formed particles. Essentially, we wanted to study the new particle formation process under conditions that we expect may be more relevant to the actual location in the atmosphere where such events take place, which are often characterized by higher relative humidities, lower temperatures, and a broader range of precursors and oxidants compared to those observed at ground level. This project had two main objectives, each of which directly addressed our hypothesis. Our first is to investigate the timing, distribution, meteorological conditions, and nanoparticle properties associated with boundary layer new particle formation through the analysis of ARM field campaigns such as HI-SCALE and long-term observations and observations performed in other locales such as in China and India where atmospheric conditions could play a crucial role in determining the mechanisms of new particle formation. This activity provided a comprehensive description, both in time and in space, of the gases and nanoparticle properties that are responsible for these events. We also performed modeling studies to explore the vertical profile and timing of new particle formation events from these campaigns. Our second objective was to perform laboratory and process-level modeling studies to investigate the role that conditions such as low ambient temperature, high relative humidity, and different oxidants such as nitrate radical play in determining unique chemical pathways for nanoparticle growth. In doing so, we revisited the representation of nanoparticle growth in global models and updated assumptions of formation and growth based on the findings of the field, laboratory, and process-level-model work. Our research provides crucial insights into the most important regions of the atmospheric boundary layer for future observational and modeling studies. It also identifies the most relevant environmental conditions, precursors, and oxidants that are responsible for nanoparticle growth, which will aid in the design of laboratory studies and process-level model experiments. The unique pathways that we discovered can be incorporated into regional and global models, thereby improving predictions and attribution of the role of new particle formation in, e.g., air pollution formation and cloud properties.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

New Particle Formation and Growth in the Houston Atmosphere During TRACER (Final Report)

From 2020-2025, researchers from UC Irvine, UC Riverside, and Colorado State University collaborated on a Department of Energy-funded project to understand how airborne particles form and grow in urban atmospheres, conducting an intensive field campaign in Houston, Texas during summer 2022. Using advanced instruments to measure gas-phase chemicals, particle composition, and a specialized chamber to study particle growth, the team discovered that sulfur-containing compounds from industrial and power plant emissions are the dominant driver of new particle formation in Houston, with particles typically forming locally in the city and growing as air moves away in the urban plume. The research revealed an important methodological insight: measurements from fixed ground stations can be misleading when interpreting how particles actually evolve as air masses move, which has significant implications for how scientists worldwide interpret atmospheric observations. These findings improve understanding of urban air quality and help reduce uncertainties in climate models, since these particles play critical roles in cloud formation and Earth's radiation balance, while also providing detailed information about ultrafine particle composition relevant to public health. The project trained three doctoral students, developed enhanced computer models for urban particle formation, and made all data publicly available through the DOE Atmospheric Radiation Measurement data archive for use by the broader scientific community.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

DESIGNING A PARTICLE FLOW CONTROL APPARATUS

Flow control within a particle-based Concentrated Solar Power (CSP) system is essential in determining the heat transfer coefficient, and therefore, the power generation capability of these systems. There are three areas where particle flow control is significant: the receivers, storage tanks, and particle-sCO2 heat exchangers. The focus of this paper is on designing a new mechanism to control the flow in the particle-sCO2 heat exchangers due to the simplicity and potential cost savings when compared to the other areas of interest. The goal is for this new design to have quicker response times in terms of particle flowrate than a slide gate or flow control valve, which are designs currently used. The design resembles that of a chuck mechanism within a drill where a rotation of the sleeve elicits movement of the jaws both vertically and horizontally to close the outlet area of the nozzle. Additionally, this design will utilize the current actuator that is already used within these heat exchangers to reduce the complexity of implementation. The jaws are designed to be closed at an angle of 76 ̊ which is just slightly steeper than the hopper leading to the mechanism. Furthermore, this design can be tuned to limit particle bridging and other particle flow phenomena that result in blockages. The prototypes were 3D printed out of polylactic acid (PLA) and scaled up to 100%, 200%, and 400% to be able to observe the velocity profiles of the mechanism more clearly. Experiments are performed with this prototype to compare the inlet and outlet mass flow rates at different configurations of the jaws. The particles used in these experiments are 0.3mm HSP 40/70 that are commonly used in particle-based CSP systems.

14 SOLAR ENERGY↗
DOE OSTI2022

Measuring binary fluidization of nonspherical and spherical particles using machine learning aided image processing

Abstract The binary fluidization of Geldart D type nonspherical wood particles and spherical low density polyethylene (LDPE) particles was investigated in a laboratory‐scale bed. The experiment was performed for varying static bed height, wood particles count, as well as superficial gas velocity. The LDPE velocity field were quantified using particle image velocimetry (PIV). The wood particles orientation and velocity are measured using particle tracking velocimetry (PTV). A machine learning pixel‐wise classification model was trained and applied to acquire wood and LDPE particle masks for PIV and PTV processing, respectively. The results show significant differences in the fluidization behavior between LDPE only case and binary fluidization case. The effects of wood particles on the slugging frequency, mean, and variation of bed height, and characteristics of the particle velocities/orientations were quantified and compared. This comprehensive experimental dataset serves as a benchmark for validating numerical models.

Li, Cheng↗
DOE OSTI2022

Influence of alveolar mixing and multiple breaths of aerosol intake on particle deposition in the human lungs

Predictive dosimetry models play an important role in assessing health effect of inhaled particulate matter and in optimizing delivery of inhaled pharmaceutical aerosols. Here, in this study, the commonly used 1D Multiple-Path Particle Dosimetry model (MPPD) was improved by including a mechanistically based model component for alveolar mixing of particles and by extending the model capabilities to account for multiple breaths of aerosol intake. These modifications increased the retained fraction of particles and consequently particle deposition predictions in the deep lung during tidal breathing. Comparison with an existing dataset (J. Aerosol Sci., 99:27-39, 2016) obtained under two breathing conditions referred to as slow and fast breathing showed significant differences in 1 µm particle deposition between predictions (slow: 30±1%, fast: 21±1%) and measurements (slow: 43±9%, fast: 30±5%) when the prior version of MPPD (single breath and no mixing, J. Aerosol Sci., 151:105647, 2021) was used. Adding a mixing model and multiple breaths moved the predictions (slow: 34±2%, fast:25±2%) closer to the range of deposition measurements. For 2.9 µm particles, predictions from both the original (slow: 70±2%, fast: 57±2%) and the revised MPPD model (slow: 71±2%, fast: 59±3%) compared well with experiments (slow: 67±8%, fast: 58±10%). This was expected as suspended fraction of 2.9 µm particles was small and thus the addition of alveolar mixing and multi breath capability only slightly increased the retained fraction for particles of this size and greater. The revised 1D model improves dose predictions in the deep lung and support human risk assessment from exposure to airborne particles.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Subject-specific modeling framework for particle deposition using computational fluid dynamics

Quantifying particle deposition and dose in the respiratory tract requires a physiologically realistic representation and reproducible computational workflows. However, existing modeling frameworks, such as the International Commission on Radiological Protection (ICRP) compartmental models and the Multiple Path Particle Dosimetry (MPPD) tool, lack detailed deposition profiles and subject-specific capabilities. The combination of advances in computer vision algorithms applied to the respiratory tract and Computational Fluid and Particle Dynamics (CFPD) allows high-fidelity simulations of particle behavior in anatomically accurate geometries derived from individual CT scans. The segmentation, preprocessing, and file preparation task for a CFPD simulation was often time-consuming, and no prior studies to-date have yet presented a fully automated framework. This work presents a fully automated workflow to obtain individualized particle deposition profiles in the human respiratory tract. The pipeline starts with segmenting upper and lower airway geometries using morphological and deep learning-based methods, generating three-dimensional (3D) models from CT imaging data. Next, a series of algorithms are presented to quality check and prepare the 3D geometry for a CFD or CFPD simulation. The preprocessing step includes correcting geometric artifacts, enforcing a physically consistent mesh, and automatically identifying and capping multiple outlets, which is required for CFD/CFPD simulations. These processed models are then input into open-source (OpenFOAM) or commercial (StarCCM+) CFD solvers, where flow and transient particle transport equations — including turbulence and particle–wall interactions are solved under realistic breathing conditions. Finally, the resulting particle deposition profiles can be integrated with Monte Carlo radiation transport codes and state-of-the-art computational phantoms to assess organ-specific absorbed doses in scenarios of radioactive aerosol inhalation. The presented work streamlines respiratory tract segmentation, preprocessing for CFD/CFPD simulations, and integration with dose assessment workflows, reducing manual intervention and improving access to high-fidelity, subject-specific modeling. The high precision in predicted particle deposition and dose distributions can improve personalized treatment strategies in respiratory medicine and refine dose estimates for radiation protection.

AI↗
DOE OSTI2023

Simulation of radioactive plume transport in the atmosphere including dynamics of particle aggregation and breakup

Accurate prediction of the atmospheric transport of debris particles relies heavily on our knowledge of the size distribution of the particles within a debris cloud. Assuming a fixed particle size during simulations is not always viable since the size distribution of the debris can change during transport. Various microphysical processes, such as aggregation and breakup, influence debris particles and dictate any changes to the size distribution. To track those changes that can occur, a population balance model can be adopted and instituted within a model framework. Nonetheless, many of the models that simulate the transport of radioactive debris following a device-driven fission incident have historically neglected to consider these processes. As such, this work describes our effort to develop a modeling framework capable of simulating the transport and deposition of a radioactive plume generated from a fission incident with a dynamic population balance including particle aggregation and breakup. Herein the impact of aggregation and breakup, individually and collectively, on the particle size distribution is explored using the developed framework. When simulating aggregation, for example, six mechanisms, including Brownian coagulation, the convective enhancement to Brownian coagulation, van der Waals-viscous force correction for Brownian coagulation, gravitational collection, turbulent inertial motion, and turbulent shear, are considered. Brownian coagulation and its corrections have, as one would expect, a large impact on relatively small aggregates. Aggregates with a diameter that is less than or equal to 1.0 μm, for instance, comprise 50.6 vol % of all aggregates in the absence of aggregation and 31.2 vol % when Brownian coagulation and its corrections are considered. Gravitational collection and, to a much lesser extent, turbulent shear and turbulent inertial motion are, conversely, of great importance to relatively large aggregates (i.e., diameter greater than 3.0 μm). Additionally, the individual effects of atmospheric and particle parameters, such as wind speed and particle density, are examined. Of the parameters examined, turbulent energy dissipation and aggregate fractal dimension (i.e., aggregate shape with lower values representing more irregular particles) were of substantial importance since both terms directly impact aggregate stability and, by extension, the breakup rate. Large-scale transport and deposition simulations in a dry atmosphere are also presented and discussed as a proof of concept.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2021

Towards understanding particle rigid-body motion during solid-state sintering

A quantitative understanding of particle rigid body (RB) motion that inherently accompanies grain boundary (GB) diffusion is highly desirable to understand and control the dynamic interplay between coarsening and densification during solid state sintering. In this work, by computer simulation using a multi-phase-field approach, we analyze systematically the roles played by each of these processes at different stages of the shrinkage of the internal pore in a three-particle green body as a function of particle size as well as thermodynamic and kinetic factors of interfaces. We demonstrate that particle RB translation promotes both neck growth, and pore rounding and shrinkage. Moreover, the forces acting at GBs and pulling neighboring particles towards one another dynamically evolve as particles fuse. In contrast, particle RB rotation has no contribution to pore shrinkage. The translational force acting on an individual particle varies with not only its size, but also the number and sizes of its neighboring particles.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Development of a Flow-through Cell for Ultrasonic Extraction (UE)─Single Particle (SP)─ICP-MS─an Approach for Nano/Microparticle Elemental and Isotopic Analysis

Nanotechnology is a salient part of the scientific landscape, and analytical approaches are rapidly evolving to enable small-scale characterization of nano- and microparticle compositions and impurities. Here, a flow-through sonicating cell was developed for direct particle extraction from a silicon wafer and integrated with an inductively coupled plasma–mass spectrometer (ICP-MS) for subsequent elemental and isotopic characterization of the released particles. Ultrasonic extraction (UE)─single particle (SP)─ICP-MS offers controlled particle mobilization from solid substrates and allows for increased sample throughput by eliminating the need for pre-extraction of particles and decreasing sample preparation steps. Coupling this device to an ICP-MS with a time-of-flight (TOF) mass analyzer, it is possible to distinguish unique isotopic compositions of the particles. Both tungsten and nickel isotopically tagged particles, which were deposited on Si wafers, are presented here with analysis via UE─SP─ICP-MS. This approach could support efforts in the fields of particle synthesis, nuclear safeguards and forensics, environmental monitoring, and semiconductor industries in which the detection of particles from substrates and wafers is critical.

Paul, Molly [ORNL] (ORCID:0009000009672055)↗
DOE OSTI2021

Influence of Ions on the Size Dependent Morphology of Aerosol Particles

The study of aerosol particles composed of mixtures of organic and inorganic compounds provides insights for understanding chemistry in the atmosphere as well as information about phase transitions of systems under confinement. In the submicron size regime, we have previously found that liquid-liquid phase separation can be inhibited at sufficiently small particle diameters leading to phase separated particles at larger sizes and homogeneous particles below a threshold diameter. In this paper, we have investigated the influence of cations and anions in the inorganic compound (NH 4 + , Na + , SO 4 2- , HSO 4 - , and Cl-) on the phase separation of submicron aerosol particles. Each of five salts were studied with two different organic compounds. Surprisingly, a strong dependence on the identity of the cation is evident in the size dependence of the particle morphology and no dependence on the anion was found. Sodium containing samples exhibit phase separation in particles below 20 nm in diameter whereas ammonium containing samples cease to undergo phase separation in particles between 45 and 65 nm in diameter. The separation relative humidity for supermicron droplets also depends on the identity of the cation in the inorganic component if the anion is the same across the salts compared. In addition, the correlation between the separation relative humidity and size dependence was investigated and displays a trend, but is not a dominant feature of the data. We explain the results in terms of hard and soft ions, where the harder cation (Na + ) leads to phase separation down to smaller sizes while the softer cation (NH 4 + ) prevents phase separation and causes particles up to a larger diameter to remain homogenous. This study has implications for atmospheric chemistry in regions dominated by sea spray aerosol, which contains sodium as the primary cation, when compared to continental aerosol, where ammonium is an abundant cation. Additionally, these findings can be used to understand the influence of cations on the phase transitions of confined materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Uranium Single Particle Analysis for Simultaneous Fluorine and Uranium Isotopic Determinations via Laser-Induced Breakdown Spectroscopy/Laser Ablation–Multicollector–Inductively Coupled Plasma–Mass Spectrometry

Uranyl fluoride (UO 2 F 2 ) particles (<20 μm) were subjected to first-of-its-kind analysis via simultaneous laser-induced breakdown spectroscopy (LIBS) and laser ablation multi-collector inductively coupled plasma–mass spectrometry (LA–MC–ICP–MS). Briefly, a nanosecond pulsed high-energy laser was focused onto the sample (particle) surface. In a single laser pulse, the UO 2 F 2 particle was excited/ionized within the microplasma volume, and the emission of light was collected via fiber optics such that emission spectroscopy could be employed for the detection of uranium (U) and fluorine (F). The ablated particle was simultaneously transported into the MC–ICP–MS for high precision isotopic (i.e., 234 U, 235 U, and 238 U) analysis. This method, LIBS/LA–MC–ICP–MS was optimized and employed to rapidly measure 80+ UO 2 F 2 particles, which were subjected to different calcination processes, which results in varying degrees of F loss from the individual particles. In measuring the particles, the average F/U ratios for the populations treated at 100 and 500 °C were 2.78 ± 1.28 and 1.01 ± 0.50, respectively, confirming loss of F through the calcination process. The average 235 U/ 238 U on the particle populations for the 100 and 500 °C were 0.007262 (22) and 0.007231 (23), which was determined to be <0.2% from the expected value. The 234 U/ 238 U ratios on the same particles were 0.000053 (11) and 0.000050 (10) for the 100 and 500 °C, respectively, <10% from the expected value. Notably, each population was analyzed in under 5 min, demonstrating the truly rapid analysis technique presented here in this paper.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Morphologically-Directed Raman Spectroscopy as an Analytical Method for Subvisible Particle Characterization in Therapeutic Protein Product Quality

Abstract Subvisible particles (SVPs) are a critical quality attribute of injectable therapeutic proteins (TPs) that needs to be controlled due to potential risks associated with drug product quality. The current compendial methods routinely used to analyze SVPs for lot release provide information on particle size and count. However, chemical identification of individual particles is also important to address root-cause analysis. Herein, we introduce Morphologically-Directed Raman Spectroscopy (MDRS) for SVP characterization of TPs. The following particles were used for method development: (1) polystyrene microspheres, a traditional standard used in industry; (2) photolithographic (SU-8); and (3) ethylene tetrafluoroethylene (ETFE) particles, candidate reference materials developed by NIST. In our study, MDRS rendered high-resolution images for the ETFE particles (> 90%) ranging from 19 to 100 μm in size, covering most of SVP range, and generated comparable morphology data to flow imaging microscopy. Our method was applied to characterize particles formed in stressed TPs and was able to chemically identify individual particles using Raman spectroscopy. MDRS was able to compare morphology and transparency properties of proteinaceous particles with reference materials. The data suggests MDRS may complement the current TPs SVP analysis system and product quality characterization workflow throughout development and commercial lifecycle.

Science & Technology - Other Topics↗
DOE OSTI2026

Microstructure-dependent particulate populations in ODS steels revealed by single-particle ICP-TOF-MS

In this work, we evaluated the ability of single-particle inductively coupled plasma time-of-flight mass spectrometry (SP-ICP-TOF-MS) to characterize particulates generated from 300 series stainless steels and oxide dispersion–strengthened (ODS) steels. Particulates were produced using two different rotary tools (cutting disk and grinding bit) to assess the influence of particle generation on effluent particulates. Across all materials and preparation techniques, SP-ICP-TOF-MS detected a substantial population of particles containing the expected constituent elements, with average compositions closely matching the nominal alloy values. A secondary population of Y-bearing particles was evident in ODS steels; their formation is strongly favored in particulates generated using the grinding bit. Specifically, in PM2000, Y-bearing particles were predominantly colocated with Al, whereas in 14YWT, Y-bearing particles were less frequently Fe-free but showed stronger colocation with Ti. These trends are consistent with the known microstructural differences between Y–Al–O oxide particles in PM2000 and finer Y–Ti–O nanoclusters in 14YWT. Together, these results demonstrate that SP-ICP-TOF-MS can resolve distinct particulate populations in complex, multicomponent steels at the femtogram mass scale, enabling particle-resolved insight into microstructure-driven phase separation and preparation-dependent particle generation.

Brubaker, Zach E. [Oak Ridge National Laboratory (↗
DOE OSTI2022

Shock-driven dispersal of a corrugated finite-thickness particle layer

A research area emerging in the multiphase flow community is the study of shock-driven multiphase instability (SDMI), a gas–particle analog of the traditional fluid-fluid Richtmyer–Meshkov instability (RMI). In this work, we study the interaction of planar air shocks with corrugated glass particle curtains through the use of numerical simulations with an Eulerian–Lagrangian approach. One objective of this study is to compare the simulated particle curtains to a comparable set of shock tube experiments performed to analyze traditional RMI of a gas curtain. The simulations are set to match the experimental shock Mach numbers and perturbation wavelengths (3.6 and 7.2 mm) while also matching the Atwood number of the experiments to the multiphase Atwood number of the simulations. Varying particle diameters are tested in the simulations to explore the impact of particle diameter on the evolution of the particle curtain. This simulation setup allows for a one-to-one comparison between RMI and SDMI under comparable conditions while also allowing for a separate study into the validity of the use of the multiphase Atwood number to compare the single-phase and multiphase instabilities. In particular, we show that the comparison depends on the diameter of the particles (thus, dependent on the Stokes number of the flow). A second objective of this study is to analyze the effect of the initial particle volume fraction on the evolution of the curtain and the behavior of the instability. This is done through analyzing the effect of the multiphase terms of the vorticity evolution equation on the vorticity deposition in SDMI. Also discussed is the effect of the particle diameter on the multiphase generation terms as well as in the baroclinic vorticity generation term in SDMI as the shock passes over the curtain.

42 ENGINEERING↗
DOE OSTI2024

Shape effects on the local dynamics of suspensions of spheroidal particles

The effect of shape on the dynamics of suspensions of non-spherical heavy particles is examined by fully resolved numerical simulations of oblate and prolate spheroids, as well as spheres, for a density ratio of ten, volume fractions ranging from 0.5% to 5%, and Reynolds numbers between 20 and 30. The dynamics is determined both by the interactions of the particles with the fluid as well as by collisions, with the number and importance of collisions increasing with volume fractions. A single isolated oblate or prolate spheroid falling under gravity generally falls broadside on, for the governing parameters examined here, and at low-volume fractions, the majority of particles in a suspension fall that way. At higher-volume fractions, the orientation is more random. The slip velocity decreases as the volume fraction increases for all shapes, as expected, but the effect of the shape is much less than seen for a single particle. Furthermore, this seems to be due to two effects. For all volume fractions, the most deformed particles cluster more than spheres and less deformed particles, which increases their slip velocity. As the concentration increases, the increased particle interactions also causes more particles to fall short side-on, which reduces the frontal area and the resulting drag, increasing the slip velocity. This second effect is, of course, absent for spherical particles.

42 ENGINEERING↗
DOE OSTI2025

Driven probe particle dynamics in a bubble and pattern forming system

We numerically examine the dynamics of a probe particle driven at a constant force through an assembly of particles with competing long-range repulsion and short-range attraction that forms a bubble or stripe state. In the bubble regime, we identify several distinct types of motion, including an elastic or pinned regime where the probe particle remains inside a bubble and drags all other bubbles with it. There is also a plastic bubble phase where the bubble in which the probe particle is trapped is able to move past the adjacent bubbles. At larger drives, there is a breakthrough regime where the probe particle jumps from bubble to bubble and, in some cases, can induce correlated rotations or plastic rearrangements of the particles within the bubbles. At the highest drives, the probe particle moves sufficiently rapidly that the background particles undergo only small distortions. The distinctive dynamic flow states and the transitions between them are accompanied by signatures in the effective drag on the driven particle, jumps in the velocity–force curves, and changes in the time-dependent velocity fluctuations. We map the dynamic phase diagram for this system for varied interaction lengths, bubble sizes, and densities.

36 MATERIALS SCIENCE↗