Search NASA⌕ Search

SEARCH · Search NASA

Results for “Particle characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

The Effects of Sc Addition on the Microstructure and Mechanical Properties of Be-Al Alloy Fabricated by Induction Melting

This study investigated the alloying effects of 0.4 wt.% Sc on the microstructure, mechanical properties, and fracture behavior of a cast Be-Al alloy prepared by vacuum induction melting. The micromechanics of Sc-containing secondary-phase particles (SPs) were characterized by nanoindentation, and the fracture behavior of the alloy was investigated via tensile fractography and optical metallography. The addition of 0.4 wt.% Sc significantly modified the alloy microstructure by decreasing the secondary dendritic arm spacing (SDAS), weakening the dendritic structure of Be, and producing an equiaxed/cellular alloy microstructure with refined Be grains. Sc alloying increased the Vickers hardness by 36%, elastic modulus by 28%, yield strength by 35%, ultimate strength by 52%, but decreased the elongation from 3.6 to 2.9%. Sc-containing SPs had a higher elastic modulus, yield strength, microhardness, and a lower plasticity index than the Be and Al matrices, resulting in interface separation during the fracture process. SPs located at the Be/Al interfaces did not act as microcrack sources for the matrices, whereas highly faceted SPs within the Be grains induced microcrack formation and decreased the elongation. The failure mode of the cast Be-Al-0.4Sc alloy still involved the brittle cleavage failure of Be regions and ductile dimple failure of Al regions, which was not the case with the cast Be-Al alloy.

36 MATERIALS SCIENCE↗
DOE OSTI2018

A role for myosin VI in retinal pigment epithelium phagocytosis

Highlights: • Quashing myosin VI activity reduces rates of phagosome trafficking in RPE cells. • Trafficked phagosomes in RPE cells undergo two modes of motion. • The more randomly directed mode of phagosome trafficking is myosin VI dependent. • The more directed mode of phagosome trafficking is myosin VI independent. The retinal pigment epithelium (RPE) is a monolayer of pigmented cells adjacent to the choroid coat, the vascular layer of the eye. Among other functions, these cells are responsible for the phagocytosis of rod and cone cell waste shed from the photoreceptor outer segments. We describe here studies to understand the involvement of the motor protein myosin VI in the trafficking of internalized microspheres by a human retinal pigment epithelium primary cell line (ARPE-19). We perturbed the myosin VI-actin interaction by overexpressing a dominant negative myosin VI construct in these cells. We used single particle tracking to characterize the trajectories of internalized fluorescent microspheres. Analysis of the speed of the microspheres' motions revealed that the magnitude of the average speed over short time scales is reduced in the presence of the dominant negative motor. Analysis of the mean-squared displacement of these trajectories demonstrated that trafficking of phagosomes involves two modes of motion, a rapid, more randomly directed motion that is myosin VI dependent and a slower, more directed motion that is independent of the motor. From these data, we posit that this trafficking process involves an interplay between myosin VI motors, which are involved in motion through the actin periphery of the cell, and microtubule motors.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2019

Silicate coating to prevent leaching from radiolabeled surrogate far-field fallout in aqueous environments

Recent characterization of radioactive particles indicate that a large percentage of the radioactivity observed during the Fukushima Daiichi nuclear meltdown was insoluble 137 Cs bound within silica microparticles. Therefore, much of the decontamination research performed prior to the Fukushima incident that used either soluble radionuclides deposited onto wet surfaces or large (~100 μm) particles characteristic of nuclear weapons fallout do not accurately represent the characteristics of potential contamination. Thus, the common practice of extrapolating radioactive decontamination methods generically to all radioactive release events is, at best, suspect. In response, a method to produce chemically-inert, radiolabeled silica particles was developed. Binding 152 Eu within a sodium silicate coating required proper temperature control and ethanol was beneficial as a volatile dispersant to limit residues. In the end, a step-wise method, which first deposited 152 Eu or 241 Am as a nitrate salt, decomposed the salt to a sesquioxide, and finally coated the surface with sodium silicate led to dispersed particles of the desired 2 or 0.5 μm diameters. Dynamic light scattering and scanning election microscopy confirmed the particle size was unchanged. Leaching studies into several common decontaminants were performed to ensure particle inertness. In this paper, our approach allows for substitution of other radionuclides making it a robust, simple, and novel method to produce inert particle surrogates for a release event that allows direct comparison of decontamination techniques and contaminant fate studies, greatly aiding the development of response and recovery plans.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2020

A thermodynamic analysis of hypervelocity impacts on metals

Hypervelocity impacts on solid surfaces generate and propagate shock waves and create extreme density, pressure, and temperature conditions. Understanding hypervelocity impacts requires a multi-physics approach at the intersection of fluid dynamics, solid mechanics, and quantum theory, which has the capability of spanning multiple different dominating physics regimes. These strong shock conditions found in hypervelocity impacts are studied in the context of high-speed collisions between spacecraft and meteoroids and debris. We study the problem of hypervelocity impacts on metals with the lens of understanding the processes that lead to the creation of an impact generated plasma. In order to characterize the impacting particle as well as its threat to spacecraft from the subsequent radiating plasma an analysis was performed that highlights how the kinetic energy of the impactor is deposited into a target, how the shock wave and shocked material in the target evolve, and how these effects can lead towards the creation of an impact plasma through heating. The analysis suggests that at low velocities the majority of the energy from a hypervelocity impact is stored in reversible elastic energy and does not contribute to strong heating. At higher impact velocities, nucleus and electron thermal components dominate, increasing the energy available for ionization. Overall, this work provides the complete set of state variable initial conditions for any study of hypervelocity impact plasma expansion and its effects.

42 ENGINEERING↗
DOE OSTI2025

Identification of uranium oxidation states using oxygen K-edge scanning transmission X-ray microscopy

The field of nuclear forensics is growing in importance, and the increasing capabilities at synchrotron radiation light sources enable non-destructive characterization of oxide particles with better spatial, compositional, and oxidation state speciation resolution than ever before. Here, uranium oxide particles derived from multiple wet chemical processing methods were examined using a scanning transmission X-ray microscope (STXM), and a weakly-supervised method was developed to automatically analyze the collected data. Multiple uranium oxidation states were observed and quantified within and between samples, yielding information about differences between particles produced via the various processing routes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Enhanced Transport of TiO 2 in Unsaturated Sand and Soil after Release from Biodegradable Plastic during Composting

Biodegradable plastics can reach full degradation when disposed of appropriately and thus alleviate plastic pollution caused by conventional plastics. But additives can be released into the environment during degradation, and the fate of these additives can be affected by the degradation process. In this study, we characterized TiO 2 particles released from a biodegradable plastic mulch during composting and studied the transport of the released TiO 2 particles in inert sand and agricultural soil columns under unsaturated flow conditions. TiO 2 microparticles were released from the biodegradable plastic mulch in both single particle and cluster forms. The released TiO 2 microparticles were fully retained in unsaturated soil columns due to its ne texture, slow flow rate, and favorable attachment conditions. But in unsaturated sand columns, the released TiO 2 microparticles were highly mobile. Additionally, comparison with the pristine TiO 2 microparticles revealed that the enhanced mobility of the released TiO 2 microparticles was caused by the presence of compost residues which blocked attachment sites on the sand surface. This study demonstrates that TiO 2 microparticles can be released during composting of biodegradable plastics, and the transport potential of the released TiO 2 microparticles in the terrestrial environment can be enhanced by the presence of compost material.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Barkas effect in strongly magnetized plasmas

Strongly magnetized plasmas, which are characterized by the particle gyrofrequency exceeding the plasma frequency, exhibit novel transport properties. For example, recent work showed that the friction force on a test charge moving through a strongly magnetized plasma not only consists of the typical stopping power component but also includes components perpendicular to the test charge's velocity. However, these studies only considered test charges that have the same sign as the charge of the plasma particles. Here, we extend these calculations to the case of charges with opposite signs (such as an ion interacting with strongly magnetized electrons). This is done with both a novel generalized Boltzmann kinetic theory and molecular dynamics simulations. It is found that the friction force changes dramatically depending on the sign of the interacting charges. Likewise, the stopping power component for oppositely charged particles decreases in magnitude compared with like-charged particles, and the perpendicular components increase in magnitude. Moreover, the difference between the two cases increases as the gyrofrequency becomes larger compared with the plasma frequency. Finally, the electrical resistivity is calculated from the friction force, where it is found that strong magnetization in conjunction with oppositely charged interactions significantly decreases the parallel resistivity and increases the perpendicular resistivity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Electron beam characterization via quantum coherent optical magnetometry

We present a quantum optics-based detection method for determining the position and current of an electron beam. As electrons pass through a dilute vapor of rubidium atoms, their magnetic field perturbs the atomic spin's quantum state and causes polarization rotation of a laser resonant with an optical transition of the atoms. By measuring the polarization rotation angle across the laser beam, we recreate a 2D projection of the magnetic field and use it to determine the e-beam position, size, and total current. We tested this method for an e-beam with currents ranging from 30 to 110 μA. Our approach is insensitive to electron kinetic energy, and we confirmed that experimentally between 10 and 20 keV. In conclusion, this technique offers a unique platform for noninvasive characterization of charged particle beams used in accelerators for particle and nuclear physics research.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Investigating high-energy proton-induced reactions on spherical nuclei: Implications for the preequilibrium exciton model

A number of accelerator-based isotope production facilities utilize $100-200$ MeV proton beams due to the high production rates enabled by high-intensity beam capabilities and the greater diversity of isotope production brought on by the long range of high-energy protons. However, nuclear reaction modeling at these energies can be challenging because of the interplay between different reaction modes and a lack of existing guiding cross section data. A Tri-lab collaboration has been formed between the Lawrence Berkeley, Los Alamos, and Brookhaven National Laboratories to address these complexities by characterizing charged-particle nuclear reactions relevant to the production of established and novel radioisotopes. In the inaugural collaboration experiments, stacked-targets of niobium foils were irradiated at the Brookhaven Linac Isotope Producer ($E_p=200$ MeV) and the Los Alamos Isotope Production Facility ($E_p=100$ MeV) to measure $^{93}$Nb(p,x) cross sections between $50-200$ MeV. The results were compared with literature data as well as the default calculations of the nuclear model codes TALYS, CoH, EMPIRE, and ALICE. The default code predictions largely failed to reproduce the measurements. Therefore, we developed a standardized procedure, which determines the reaction model parameters that best reproduce the most prominent reaction channels in a physically justifiable manner. Overall, the primary focus of the procedure was to determine the best parameterization for the pre-equilibrium two-component exciton model. This modeling study revealed a trend towards a relative decrease for internal transition rates at intermediate proton energies ($E_p=20-60$ MeV) in the current exciton model as compared to the default values. The results of this work are instrumental for the planning, execution, and analysis essential to isotope production.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Microscopic dynamics of stress relaxation in a nanocolloidal soft glass

Here, we report x-ray photon correlation spectroscopy (XPCS) experiments with in situ rheometry performed on a soft glass composed of a concentrated suspension of charged silica nanoparticles subjected to step strains that induce yielding and flow. The XPCS measurements characterize the particle-scale and mesoscale motions within the glass that underlie the highly protracted decay of the macroscopic stress following the step strains. These dynamics are anisotropic, with slow, convective particle motion along the direction of the preceding shear that persists for surprisingly large times and that is accompanied by intermittent motion in the perpendicular (vorticity) direction. A close correspondence between the convective dynamics and stress relaxation is demonstrated by power-law scaling between the characteristic velocity of the collective particle motion and the rate of stress decay.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Persistence of collectivity in the low-lying states of 30,31 Na inside the 𝑁 = 20 island of inversion

Near the 𝛽-stability line, nuclei with magic numbers are expected to exhibit spherical ground states. However, mass measurements of neutron-rich nuclei near the 𝑁 = 20 island of inversion have indicated an excess in the binding energies. These results, together with subsequent spectroscopic studies and theoretical works, point to the structural evolution from normal configurations to intruder-deformed configurations characterized by particle-hole excitations across the shell gap. Despite evidence of intruder-dominant ground states for the 30,31 Na isotopes in the vicinity of 𝑁 = 20, a question remains as to whether the deformation persists into the ground-state bands beyond the first excited states. Here, in this work, we report on a heavy-ion inelastic scattering measurement performed with GRETINA, the TRIPLEX device, and the S800 spectrograph to study the low-lying excitations in neutron-rich 30,31 Na . The observed gamma rays for the (4 + ) → (3 + ), (3 + ) → 2$^+_{g.s.}$, and (4 + ) → 2$^+_{g.s.}$ decays in 30 Na and for the (7/2 + ) → (5/2 + ) and (5/2 + )→3/2$^+_{g.s.}$ decays in 31 Na were used to extract the reduced transition probabilities 𝐵⁡(𝐸⁢2↑). We report the first measurement of the 𝐵⁡(𝐸⁢2↑) between the 3/2$^+_{g.s.}$ and the (7/2 + ) states in 31 Na . The results from this study are compared to shell-model calculations, confirming the persistence of large collectivity in the low-lying excited states consistent with the formation of the well-deformed ground-state bands in 30,31 Na .

collective models↗
DOE OSTI2018

Small-angle neutron scattering measurements of δ-phase deuteride (hydride) precipitates in Zircaloy 4

Small-angle neutron scattering (SANS) measurements have been performed under ambient conditions to characterize deuteride (hydride) particles in Zircaloy 4, a fuel cladding material used in pressurized light-water nuclear reactors. Hydrogen pickup by the cladding leads to a rim structure in which large circumferential hydride plate-like particles preferentially form on the cooler water-side region of the cladding. Deuterium substitution has been used to increase the coherent response and decrease the incoherent background of the SANS measurements. Four bulk deuterium concentrations were investigated, approximately 100, 400, 500 and 1000 parts per million by weight (w.p.p.m.) deuterium, as well as a zero-deuterium-concentration reference sample. The net SANS response from the deuteride phase was determined at all concentration values after subtraction of the reference SANS response, which effectively subtracted the strong scattering from second-phase particles in as-received Zircaloy. The net SANS response consisted of strong Porod scattering from deuteride particles over the entire measured Q range (0.005–0.4 Å -1 ). The net SANS response was anisotropic at concentrations greater than 100 w.p.p.m. and required elliptical averaging analysis. A significant sample orientation effect on the intensity of the SANS response was observed, due to preferential alignment of deuteride particles. The effect of ex situ applied stress at elevated temperature on deuteride phase dissolution and reprecipitation was investigated; a weak effect was observed with SANS that could not be confirmed by optical microscopy.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2018

Production of near-full density uranium nitride microspheres with a hot isostatic press

Depleted uranium nitride (UN) kernels with diameters ranging from 420 to 858 microns and theoretical densities (TD) between 87 and 91 percent were postprocessed using a hot isostatic press (HIP) in an argon gas media. This treatment was shown to increase the TD up to above 97%. Uranium nitride is highly reactive with oxygen. Therefore, a novel crucible design was implemented to remove impurities in the argon gas via in situ gettering to avoid oxidation of the UN kernels. The density before and after each HIP procedure was calculated from average weight, volume, and ellipticity determined with established characterization techniques for particle. Furthermore, micrographs confirmed the nearly full densification of the particles using the gettering approach and HIP processing parameters investigated in this work.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2019

Optical Spectroscopy and Superconductivity of Cuprates (Review)

The optical properties of low-dimensional dielectric cuprates, including parent systems for high-temperature superconductors, such as La{sub 2}CuO{sub 4}, Sr{sub 2}CuO{sub 2}Cl{sub 2}, and YBa{sub 2}Cu{sub 3}O{sub 6} are briefly reviewed. The main focus is on the d–d and p–d charge transfer transitions, which determine the fundamental absorption band. The analysis of optical properties shows the instability of parent cuprates against the d–d charge transfer with the formation of metastable electron–hole (EH) dimers of the Cu{sup 1+}–Cu{sup 3+}-type pairs coupled by the two-particle transfer and characterized by the giant electric polarizability. The formation of a system of stable EH dimers upon nonisovalent substitution determines the unconventional properties of the pseudogap and superconducting phases of doped cuprates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Size and Time-Resolved Automated Aerosol Sampling Field Campaign Report

To improve the understanding of the impacts of the vertical distribution of aerosol chemical composition on radiative forcing of aerosol, we performed a detailed physicochemical characterization of aerosol particles sampled during ARM deployment of the tethered balloon system at two ARM sites. We used multi-modal microscopy/spectroscopy techniques and advanced mass spectrometry platforms for the analysis of particles. We found variations in size-resolved aerosol composition at different altitudes. We also observed changes in aerosol composition during different seasons. Some of our observations at ARM’s Oliktok Point, Alaska site suggest cloud processing of aerosol while sampling in clouds, below clouds, and above clouds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Measurements of Pion and Muon Nuclear Capture at Rest on Argon in the LArIAT Test Beam Experiment

LArIAT is a liquid argon time projection chamber (LArTPC) experiment in a test beam at Fermilab from 2015 to 2017 to understand and characterize interactions of particles in LAr which are commonly observed in neutrino-Ar final-states. Tracks for pions and muons in LArTPCs are difficult to differentiate since both particles exhibit very similar ionization profiles for muon and pion that stop in the TPC. We are exploring unique new particle discrimination capabilities by exploiting information from small, isolated ionization depositions, referred to as "blips", reconstructed near the endpoint of stopping tracks. These blips are formed by gammas emitted when an at-rest pion or muon captures on the argon nucleus. The relatively low beam energy provided by LArIAT makes it uniquely suited for performing this demonstration. In this poster, we present an overview of event candidate selection, blip reconstruction, and background subtraction corresponding to our signal of interest, nuclear captures of pions and muons at rest inside LArIAT's TPC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Multimodal Atomic Force Microscopy for the Characterization of Metallic Particulates

This study investigates the utility of multimodal, or functional, atomic force microscopy (AFM) for the characterization of individual particles and particle ensembles. In single-particle analyses, AFM imaging modes provided orthogonal insights into mechanical and magnetic properties that are not accessible through conventional electron microscopy. Although the experiments were inherently delicate and time-intensive, with an observed sample loss rate of approximately 30%, these techniques enabled the qualitative differentiation of grain structures and magnetic domains, underscoring the challenges of experimental robustness. For particle ensembles, AFM enabled the extraction of reliable 2D and 3D particle size distributions. However, efforts to chemically differentiate particles based on mechanical property contrasts were limited by scaling effects and the qualitative nature of the data. Overall, multimodal AFM offers valuable complementary information, but its application requires careful consideration of methodological limitations, particularly for sample integrity, calibration, and scalability of mechanical and magnetic measurements. This report is organized to first address the application of AFM to single-particle analysis using various imaging modalities, followed by its potential role in ensemble-level particle screening and differentiation.

36 MATERIALS SCIENCE↗