Search NASA⌕ Search

SEARCH · Search NASA

Results for “Silicates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Lack of Evidence of In-Situ Decay of Aluminum-26 in a FeO-Poor Ferromagnesian Crystalline Silicate Particle, Pyxie, from Comet Wild 2

One of the important discoveries from the Stardust mission is the observation of crystalline silicate particles that resemble Ca, Al-rich inclusions (CAIs) and chondrules in carbonaceous chondrites], which suggests radial transport of high temperature solids from the inner to the outer solar nebula regions and capture by accreting cometary objects. The Al-Mg isotope analyses of CAI-like and type II chondrule-like particles revealed no excess of Mg-26 derived from in-situ decay of Al-26 (Tau)(sub 1/2) = 0.705Myr; ), suggesting late formation of these particles. However, the number of Wild 2 particles analyzed for Al-Mg isotopes is still limited (n = 3). In order to better understand the timing of the formation of Wild 2 particles and possible radial transport in the protoplanetary disk, we performed SIMS (Secondary Ion Mass Spectrometer) Al-Mg isotope analyses of plagioclase in a FeO-poor ferromagnesian Wild 2 particle, which is the most abundant type among crystalline Wild 2 particles.

Nakashima, D.↗

Identification of a Compound Spinel and Silicate Presolar Grain in a Chondritic Interplanetary Dust Particle

Anhydrous chondritic porous interplanetary dust particles (CP IDPs) have undergone minimal parent body alteration and contain an assemblage of highly primitive materials, including molecular cloud material, presolar grains, and material that formed in the early solar nebula [1-3]. The exact parent bodies of individual IDPs are not known, but IDPs that have extremely high abundances of presolar silicates (up to 1.5%) most likely have cometary origins [1, 4]. The presolar grain abundance among these minimally altered CP IDPs varies widely. "Isotopically primitive" IDPs distinguished by anomalous bulk N isotopic compositions, numerous 15N-rich hotspots, and some C isotopic anomalies have higher average abundances of presolar grains (~375 ppm) than IDPs with isotopically normal bulk N (<10 ppm) [5]. Some D and N isotopic anomalies have been linked to carbonaceous matter, though this material is only rarely isotopically anomalous in C [1, 5, 6]. Previous studies of the bulk chemistry and, in some samples, the mineralogy of select anhydrous CP IDPs indicate a link between high C abundance and pyroxene-dominated mineralogy [7]. In this study, we conduct coordinated mineralogical and isotopic analyses of samples that were analyzed by [7] to characterize isotopically anomalous materials and to establish possible correlations with C abundance.

Nguyen, A. N.↗

Transmission X-ray Diffraction (XRD) Patterns Relevant to the MSL Chemin Amorphous Component: Sulfates And Silicates

The Mars Science Laboratory (MSL) CheMin instrument on the Curiosity rover is a transmission X-ray diffractometer (Co-Kalpha radiation source and a approx.5deg to approx.52deg 2theta range) where the analyzed powder samples are constrained to have discrete particle diameters <150 microns by a sieve. To date, diffraction patterns have been obtained for one basaltic soil (Rocknest (RN)) and four drill fines of coherent rock (John Klein (JK), Cumberland (CB), Windjana (WJ), and Confidence Hills (CH)). The CheMin instrument has detected and quantified the abundance of both primary igneous (e.g., feldspar, olivine, and pyroxene) and secondary (e.g., Ca-sulfates, hematite, akaganeite, and Fe-saponite) minerals. The diffraction patterns of all CheMin samples are also characterized by a broad diffraction band centered near 30deg 2theta and by increasing diffraction intensity (scattering continuum) from approx.15deg to approx.5deg, the 2theta minimum. Both the broad band and the scattering continuum are attributed to the presence of an XRD amorphous component. Estimates of amorphous component abundance, based on the XRD data itself and on mass-balance calculations using APXS data crystalline component chemistry derived from XRD data, martian meteorites, and/or stoichiometry [e.g., 6-9], range from approx.20 wt.% to approx.50 wt.% of bulk sample. The APXSbased calculations show that the amorphous component is rich in volatile elements (esp. SO3) and is not simply primary basaltic glass, which was used as a surrogate to model the broad band in the RN CheMin pattern. For RN, the entire volatile inventory (except minor anhydrite) is assigned to the amorphous component because no volatile-bearing crystalline phases were reported within detection limits [2]. For JK and CB, Fesaponite, basanite, and akaganeite are volatile-bearing crystalline components. Here we report transmission XRD patterns for sulfate and silicate phases relevant to interpretation of MSL-CheMin XRD amorphous components.

Morris, R. V.↗

Identification of Highly Fractionated (18)O-Rich Silicate Grains in the Queen Alexandra Range 99177 CR3 Chondrite

Carbonaceous chondrites contain a mixture of solar system condensates, presolar grains, and primitive organic matter. The CR3 chondrite QUE 99177 has undergone minimal al-teration [1], exemplified by abundant presolar silicates [2, 3] and anomalous organic matter [4]. Oxygen isotopic imaging studies of this meteorite have focused on finding submicrometer anomalous grains in fine-grained regions of thin sections. Here we present re-sults of an O isotopic survey of larger matrix grains.

Nguyen, A. N.↗

Thermal Ablation Modeling for Silicate Materials

A general thermal ablation model for silicates is proposed. The model includes the mass losses through the balance between evaporation and condensation, and through the moving molten layer driven by surface shear force and pressure gradient. This model can be applied in the ablation simulation of the meteoroid and the glassy ablator for spacecraft Thermal Protection Systems. Time-dependent axisymmetric computations are performed by coupling the fluid dynamics code, Data-Parallel Line Relaxation program, with the material response code, Two-dimensional Implicit Thermal Ablation simulation program, to predict the mass lost rates and shape change. The predicted mass loss rates will be compared with available data for model validation, and parametric studies will also be performed for meteoroid earth entry conditions.

Ablation↗

Thermal Ablation Modeling for Silicate Materials

A thermal ablation model for silicates is proposed. The model includes the mass losses through the balance between evaporation and condensation, and through the moving molten layer driven by surface shear force and pressure gradient. This model can be applied in ablation simulations of the meteoroid or glassy Thermal Protection Systems for spacecraft. Time-dependent axi-symmetric computations are performed by coupling the fluid dynamics code, Data-Parallel Line Relaxation program, with the material response code, Two-dimensional Implicit Thermal Ablation simulation program, to predict the mass lost rates and shape change. For model validation, the surface recession of fused amorphous quartz rod is computed, and the recession predictions reasonably agree with available data. The present parametric studies for two groups of meteoroid earth entry conditions indicate that the mass loss through moving molten layer is negligibly small for heat-flux conditions at around 1 MW/cm(exp. 2).

Ablators↗

Effects of Aqueous Solutions on the Slow Crack Growth of Soda-Lime-Silicate Glass

The slow crack growth (SCG) parameters of soda-lime-silicate were measured in distilled and saltwater of various concentrations in order to determine if the presence of salt and the contaminate formation of a weak sodium film affects stress corrosion susceptibility. Past research indicates that solvents affect the rate of crack growth; however, the effects of salt have not been studied. The results indicate a small but statistically significant effect on the SCG parameters A and n at high concentrations; however, for typical engineering purposes, the effect can be ignored.

salt↗

Partitioning of U, Th and K Between Metal, Sulfide and Silicate, Insights into the Volatile-Content of Mercury

During the early stages of the Solar System formation, especially during the T-Tauri phase, the Sun emitted strong solar winds, which are thought to have expelled a portion of the volatile elements from the inner solar system. It is therefore usually believed that the volatile depletion of a planet is correlated with its proximity to the Sun. This trend was supported by the K/Th and K/U ratios of Venus, the Earth, and Mars. Prior to the MESSENGER mission, it was expected that Mercury is the most volatile-depleted planet. However, the Gamma Ray Spectrometer of MESSENGER spacecraft revealed elevated K/U and K/Th ratios for the surface of Mercury, much higher than previous expectations. It is possible that the K/Th and K/U ratios on the surface are not a reliable gauge of the bulk volatile content of Mercury. Mercury is enriched in sulfur and is the most reduced of the terrestrial planets, with oxygen fugacity (fO2) between IW-6.3 and IW-2.6 log units. At these particular compositions, U, Th and K behave differently and can become more siderophile or chalcophile. If significant amounts of U and Th are sequestered in the core, the apparent K/U and K/Th ratios measured on the surface may not represent the volatile budget of the whole planet. An accurate determination of the partitioning of these elements between silicate, metal, and sulfide phases under Mercurian conditions is therefore essential to better constrain Mercury's volatile content and assess planetary formation models.

Habermann, M.↗

Metal-Silicate-Sulfide Partitioning of U, Th, and K: Implications for the Budget of Volatile Elements in Mercury

During formation of the solar system, the Sun produced strong solar winds, which stripped away a portion of the volatile elements from the forming planets. Hence, it was expected that planets closest to the sun, such as Mercury, are more depleted in volatile elements in comparison to other terrestrial planets. However, the MESSENGER mission detected higher than expected K/U and K/Th ratios on Mercury's surface, indicating a volatile content between that of Mars and Earth. Our experiments aim to resolve this discrepancy by experimentally determining the partition coefficients (D(sup met/sil)) of K, U, and Th between metal and silicate at varying pressure (1 to 5 GPa), temperature (1500 to 1900 C), oxygen fugacity (IW-2.5 to IW-6.5) and sulfur-content in the metal (0 to 33 wt%). Our data show that U, Th, and K become more siderophile with decreasing fO2 and increasing sulfur-content, with a stronger effect for U and Th in comparison to K. Using these results, the concentrations of U, Th, and K in the bulk planet were calculated for different scenarios, where the planet equilibrated at a fO2 between IW-4 and IW-7, assuming the existence of a FeS layer, between the core and mantle, with variable thickness. These models show that significant amounts of U and Th are partitioned into Mercury's core. The elevated superficial K/U and K/Th values are therefore only a consequence of the sequestration of U and Th into the core, not evidence of the overall volatile content of Mercury.

Habermann, M.↗

The Effects of Salt Water on the Slow Crack Growth of Soda Lime Silicate Glass

The slow crack growth parameters of soda-lime silicate were measured in distilled and salt water of various concentrations in order to determine if stress corrosion susceptibility is affected by the presence of salt and the contaminate formation of a weak sodium film. Past research indicates that solvents effect the rate of crack growth, however, the effects of salt have not been studied. The results indicate a small but statistically significant effect on the slow crack growth parameters A and n. However, for typical engineering purposes, the effect can be ignored.

Toughness↗

Ag Isotopic Evolution of the Mantle During Accretion: New Constraints from Pd and Ag Metal-Silicate Partitioning

Decay of (sup 107) Pd to (sup 107) Ag has a half-life of 6.5 times 10 (sup 6) mega-annums. Because these elements are siderophile but also volatile, they offer potential constraints on the timing of core formation as well as volatile addition. Initial modelling has shown that the Ag isotopic composition of the bulk silicate Earth (BSE) can be explained if accretion occurs with late volatile addition. These arguments were tested for sensitivity for pre-cursor Pd/Ag contents, and for a fixed Pd/Ag ratio of the BSE of 0.1. New Ag and Pd partitioning data has allowed a better understanding of the partitioning behavior of Pd and Ag during core formation. The effects of S, C and Si, and the effect of high temperature and pressure has been evaluated. We can now calculate D(Ag) and D(Pd) over the wide range of PT conditions and variable metallic liquid compositions that are known during accretion. We then use this new partitioning information to revisit the Ag isotopic composition of the BSE during accretion.

Righter, K.↗

A Complex History of Silicate Differentiation of Mars from Nd and Hf Isotopes in Crustal Breccia NWA 7034

Resolving the possible mantle and crustal sources for shergottite meteorites is crucial for understanding the formation and early differentiation of Mars. Orbiter and rover characterization of the martian surface reveal that the major element composition of most of its surface does not match the shergottites (McSween et al., 2009)leaving the relationship between them poorly understood. The identification of the meteorite NWA 7034 and its pairs as a Mars surface rock (Cartwright et al., 2014)provides access to a representative sample of Mars' crust (Agee et al., 2013;Humayun et al., 2013). Utilizing the short-lived Sm-146 - Nd-142, and long-lived Sm-142 - Nd-142 and Lu-176 - Hf-176 chronometers, which are sensitive to silicate differentiation, we analyzed three fragments of NWA 7034. The very negative mean isotopic compositions for this breccia, μNd-142(sub JNdi-1)=−45 +/-5(2SD), εNd-143(sub CHUR)=−16.7 +/-0.4(2SD) and εHf176(sub CHUR)=−61 +/-9(2SD) point to an ancient origin for this martian crust. However, modeling of the data shows that the crust sampled by NWA 7034 possesses a Hf/Nd ratio and coupled εNd-143 - μNd-142 model age that are incompatible with this crustal reservoir being an end-member that generated the shergottite source mixing array. In addition, this crust is not juvenile, despite its rare earth element profile, but has had a multistage formation history. Therefore, early crustal extraction alone was not responsible for the creation of the reservoirs that produced the shergottites. Instead mantle reservoirs formed via other early differentiation processes such as in a Mars magma ocean must be responsible for the trace element and isotopic signatures present in shergottites.

Rosalind M. G. Armytage↗

Molten Silicate Reactivity with Environmental Barrier Coating Materials for Gas Turbine Engine Applications

Rare earth (RE) disilicates are utilized in environmental barrier coatings (EBCs) to protect SiC-based ceramic matrix composites (CMCs) from destructive reactions with water vapor and other combustion species. These coating materials, however, degrade when exposed to molten silicate deposits primarily composed of calcium-magnesium aluminosilicates (CMAS). Coating materials are exposed to CMAS by engine ingestion of dust particulates from terrestrial sources during operation. Due to continual increases in engine operating temperature, it is important to understand the high temperature thermochemical mechanisms that drive corrosion of these materials. This work focuses on characterizing reaction products between disilicates and CMAS and optimizing coating chemistries to mitigate damage.

Stokes, Jamesa L.↗

VESIcal Part I: An open-source thermodynamic model engine for mixed volatile (H2O-CO2) solubility in silicate melts

Thermodynamics has been fundamental to the interpretation of geologic data and modeling of geologic systems for decades. However, more recent advancements in computational capabilities and a marked increase in researchers’ accessibility to computing tools has outpaced the functionality and extensibility of currently available modeling tools. Here we present VESIcal (Volatile Equilibria and Saturation Identification calculator): the first comprehensive modeling tool for H 2 O, CO 2 , and mixed (H 2 O-CO 2 ) solubility in silicate melts that: a) allows users access to seven commonly used models, plus easy inter-comparison between models; b) provides universal functionality for all models (e.g., functions for calculating saturation pressures, degassing paths, etc.); c) can process large datasets (1,000’s of samples) automatically; d) can output computed data into an excel spreadsheet for simple post-modeling analysis; e) integrates advanced plotting capabilities directly within the tool; and f) provides all of these within the framework of a python library, making the tool extensible by the user and allowing any of the model functions to be incorporated into any other code capable of calling python. The tool is presented within this manuscript, which is a Jupyter notebook containing worked examples accessible to python users with a range of skill levels. The basic functions of VESIcal can also be access via a web app (https://vesical.anvil.app). The VESIcal python library is open-source and available for download at https://github.com/kaylai/VESIcal.

K. Iacovino↗

Thermal Expansion Coefficients of Ca2Y8(SiO4)6O2 and Ca2Yb8(SiO4)6O2 Apatite-type Silicates

High temperature X-ray diffraction (XRD) scans of Y2Si2O7 and Yb2Si2O7 reactions with calcium-magnesium-aluminosilicates (CMAS) were utilized to determine thermal expansion coefficients (CTEs) of Ca2Y8(SiO4)6O2 and Ca2Yb8(SiO4)6O2 apatite materials. In order to validate these measurements, the CTEs of Y2Si2O7, Yb2Si2O7 and SiO2 were also determined from the same scans. The directional CTEs for γ-Y2Si2O7 were determined to be αa=5.84×10-6/K, αb=6.81×10-6/K and αc=0.81×10-6/K, and β-Yb2Si2O7 was determined to have values of αa=6.89×10-6/K, αb=4.81×10-6/K and αc=2.78×10-6/K. The average CTEs of γ-Y2Si2O7 and β-Yb2Si2O7 were determined to be 4.5×10-6/K and 4.7×10-6/K, respectively, which agreed with previous analyses. Ca2Y8(SiO4)6O2 exhibited directional CTEs of αa=9.36×10-6/K and αc=7.95×10-6/K (averaged between two sets of data), whereas Ca2Yb8(SiO4)6O2 had values that were very similar (αa=9.63×10-6/K, αc=7.45×10-6/K). Both results for the Ca2RE8(SiO4)6O2 apatites correlated well with the limited data on apatite-type silicates available in literature.

rare earth↗

Chemical and petrographic characterization of amorphous silicate material in cometary GEMS

Amorphous silicate material (ASM) is found in the matrix of GEMS (glass with embedded metal and sulfides) in chondritic porous interplanetary dust particles (CP-IDPs) and in the matrices of primitive chondritic meteorites. It either formed by irradiation of crystalline precursors in the interstellar medium or by non-equilibrium condensation in the solar nebula. However, the origins of ASM in IDPs and chondrites and their possible relationship are still not well constrained. Here we performed a petrographic and chemical characterization of ASM in five CP-IDPs by Transmission Electron Microscopy (TEM)techniques. We also analyzed carbon and nitrogen isotopic compositions of organic matter by Nano SIMS to constrain the pristine character of analyzed IDPs. ASM in IDPs is depleted in all major element/Si ratios with respect to the solar value. Compared to bulk GEMS analyses, the ASM contains less Fe, because nanophase inclusions of Fe-Ni-metal and FeS are mostly excluded by our approach. In contrast, ASM in meteorites has higher-than-solar Fe/Si ratios, maybe due to aqueous alteration on the meteorite parent bodies. Chemical composition of GEMS ASM indicates a non-equilibrium condensation origin. Silicone oil contamination of particles during collection is excluded, because GEMS collected in dry polyurethane show similar compositions. Magnetite rims around GEMS in our IDP samples indicate heating of some particles during atmospheric entry. However, preserved 15N and13C isotopic anomalies in organic matter around GEMS and in IDP matrix link the IDPs to a cold environment and overall validate their primitiveness.

Birgit Schulz↗

Mesosiderite Silicates vs. HED Polymict Breccias

The silicate portions of mesosiderites are broadly like howardites [1], and this has led to persistent interpretations that mesosiderites and howardites are derived from the same parent asteroid [2]. Yet, when examined carefully, one finds that there are substantial petrological and compositional differences between these polymict breccias. These differences indicate that separate parent asteroids are more probable [3, 4]. I will document the distinctions between these groups based on my data and literature information [5] and discuss their origins.

mesosiderite↗