Search NASA⌕ Search

SEARCH · Search NASA

Results for “TiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Enhanced efficiency of large-area dye-sensitized solar cells by light-scattering effect using multilayer TiO2 photoanodes

Highlights: • DSSCs with an active area of 100.6 cm{sup 2} and light-scattering layers are fabricated. • The light-scattering effect is shown to enhance the light absorption in the red part of the solar spectrum. • The light-scattering effect is more important than the dye adsorption capacity for TiO{sub 2} photoanodes with same thickness. • The highest power conversion efficiency of 7.52% has been obtained by the DSSC with optimized conditions. - Abstract: In order to reduce the usage of photoactive dye and improve light harvesting by the photoanode of dye-sensitized solar cells (DSSCs), TiO{sub 2} scatting layers were introduced. We have investigated the light-scattering effect in large-area DSSCs with an active area of 100.6 cm{sup 2} that contain diffusing or reflective layers. The result shows that the light-scattering effect is more important than the dye adsorption capacity for the light harvesting property of TiO{sub 2} photoanodes with same thickness, and the light-scattering effect is shown to enhance the light absorption in the red part of the solar spectrum. The highest power conversion efficiency of 7.52% has been obtained by the cell with optimized high dye adsorption layer and high light-scattering layer, which is 9.5% higher than that of the cell without the light-scattering layer (6.87%).

14 SOLAR ENERGY↗

Rapid preparation of TiO2-SiO2 heterostructure photonic crystal in the near-infrared region via a modified electrophoresis-assisted self-assembly process

Highlights: • TiO{sub 2}-SiO{sub 2} heterostructure photonic crystal was rapidly fabricated. • The voltage played an important role in the electrophoresis-assisted self-assembly. • The photonic band gap of photonic crystal was in the near-infrared region. • The drawing process can accelerate the speed of self-assembling. - Abstract: TiO{sub 2}-SiO{sub 2} heterostructure photonic crystal was rapidly fabricated by a modified electrophoresis-assisted self-assembly process. The effect of voltage on preparation and properties of TiO{sub 2}-SiO{sub 2} heterostructure photonic crystal was discussed. The results of the tests show that TiO{sub 2}-SiO{sub 2} heterostructure photonic crystal with different structures can be rapidly fabricated by controlling the voltage. With the increase of voltage, the TiO{sub 2}-SiO{sub 2} heterostructure photonic crystal is more likely to form an ordered hexagonal array and shows a more bright and uniform color. Meanwhile, the central wavelength of the photonic band gap will be blue shifted in the near-infrared region.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Enhanced photon collection of high surface area carbonate-doped mesoporous TiO2 nanospheres in dye sensitized solar cells

Highlights: • Carbonate-doped mesoporous TiO{sub 2} showed enhanced DSSC efficiency (5.4%). • Carbonate-doped TiO{sub 2} indicated higher surface area and incident photon conversion efficiency. • Carbonate-doped TiO{sub 2} showed lower resistance and longer life time. - Abstract: Carbonate-doped mesoporous TiO{sub 2} nanospheres with anatase phase were successfully synthesized by the simple solvothermal method. The synthesized nanospheres were monodispersed and composed of particles having the size of 10–15 nm. Scanning transmission electron microscopy (STEM) analysis showed nanosphere with large number particles. STEM-mapping clearly showed that Ti, O, and C were homogeneously distributed. Incorporation of carbonate in TiO{sub 2} was confirmed by XPS analysis. The peak at 284.3 eV was assigned to CO and indicated the formation TiOC structure due to carbonate doping in TiO{sub 2} lattice. Dye-sensitized solar cells (DSSCs) containing the nanospheres were fabricated by spray coating technique using N719 dye. Carbonate-doped mesoporous TiO{sub 2} showed enhanced DSSC efficiency (5.4%) compared to undoped (3.4%) and commercially available TiO{sub 2} (P25) (2.4%). It indicated (1) higher surface area and incident photon conversion efficiency, (2) lower resistance and longer life time compared with undoped TiO{sub 2}.

14 SOLAR ENERGY↗

Effect of oxygen vacancies and Ag deposition on the magnetic properties of Ag/N co-doped TiO2 single-crystal films

Highlights: • Photochemical deposition method to prepare Ag-doped TiO{sub 2} samples. • TiO{sub 2} single crystal films are used for studying room temperature ferromagnetism origin. • Ag element is deposited on TiO{sub 2} single crystal films surface in the form of Ag particles. • Oxygen vacancies and Ag particles synergy influence the ferromagnetism in samples. - Abstract: We employ TiO{sub 2} single-crystal films as a substrate and use a photochemical deposition method to prepare Ag-doped and Ag/N co-doped TiO{sub 2} single-crystal films. We also investigate the optical and magnetic properties of the samples using various measurements. No diffraction peaks related to silver oxide appear in the X-ray diffraction (XRD) spectra, which implies the existence of Ag atoms in Ag-doped TiO{sub 2} single-crystal films. X-ray photoelectron spectroscopy (XPS) spectra indicate the existence of Ti{sup 4+} and Ag° in Ag/N co-doped TiO{sub 2} single-crystal films. It is found that Ag is deposited on a TiO{sub 2} single-crystal film surface in the form of Ag particles. Meanwhile, Ag particles can slightly enhance ferromagnetism in Ag-doped TiO{sub 2} single-crystal films compared with the TiO{sub 2} single-crystal film sample. Oxygen vacancies and Ag particle synergy influence ferromagnetism in Ag/N co-doped TiO{sub 2} single-crystal films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photocatalytic activities and chemically-bonded mechanism of SiO2@ TiO2 nanocomposites coated cement-based materials

Highlights: • Two samples have different deposited density of TiO{sub 2} nanoparticles on each SiO{sub 2} nanosphere, which depend on the difference of the water dosage. • When the curing time is 28 days, water adsorption rates of mortar-2 at 270 min have decreased by 17.8%, which may be attributed to pozzolanic reactivity of SiO{sub 2} on cement-based materials. • The formation of C-S-H gels via pozzolanic reaction of SiO{sub 2} on cement-based materials has been demonstrated by XPS and NMR spectra. • Cem-1 and cem-2 show excellent photocatalytic property. - Abstract: Photocatalytic technology has been studied in building materials, especially for the surface. However, the drawback of surface-treatment application is weak adhesion between coatings and the substrates resulting poor durability in outdoor environments. In the study, two SiO{sub 2}@TiO{sub 2} core-shell nanocomposites were synthetized and coated cement-based materials, and the photocatalytic activity (rhodamine B removal efficiency) and surface modification/densification performances of coated cement-based materials were studied. The two samples have different deposited densities of TiO{sub 2} nanoparticles on each SiO{sub 2} nanosphere. Water adsorption rates of coated mortar measured at 270 min decreased by 17.8% when curing time was 28 days. Reaction experiments of SiO{sub 2}@TiO{sub 2} nanocomposites and Ca(OH){sub 2} with different dosages were carried out to investigate the reaction mechanism. The formation of C-S-H gel was confirmed due to the pozzolanic reaction of samples and Ca(OH){sub 2}. The coated cement pastes show excellent photocatalytic activity for rhodamine B removal.

36 MATERIALS SCIENCE↗

Formation of TiO2 nanoribbons by anodization under high current density

Highlights: • TiO{sub 2} nanotubes were obtained under low current density. • TiO{sub 2} nanoribbons were obtained under high current density. • The pore walls of top TiO{sub 2} nanotubes are obviously thinner than other part. • Micro-liquid-flow causes the appearance of TiO{sub 2} nanoribbons. - Abstract: Highly ordered TiO{sub 2} nanoribbons are obtained by anodizations in NH{sub 4}F electrolyte under high current density. Although intact TiO{sub 2} nanoribbons appear, there are still nanotubes beneath nanoribbons. It is reasonable to speculate that TiO{sub 2} nanoribbons evolve from TiO{sub 2} nanotubes. While the applied current is high, the electronic current is also high, which gives rise to lots of oxygen bubbles. With the accumulation of oxygen bubbles, oxygen bubbles must expand upward and rupture finally. Therefore, gas flow from oxygen bubbles results in the generation of micro-liquid-flow. Because of micro-liquid-flow, the nanotube wall is corroded and scoured. The corrosion of upper pore wall is the most sever and thus the upper pore wall becomes the thinnest locality of nanotube wall. As a result, the nanotubes can collapse easily. Finally, one TiO{sub 2} nanotube is divided into several TiO{sub 2} nanoribbons while there is still intact tube beneath nanoribbons.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Morphology of phase-separated VO2 films deposited on TiO2-(001) substrate

Highlights: • Phase separation in VO{sub 2} films at room temperature was studied by TEM. • Tetragonal phase with a zig-zag interface was observed in the neighborhood of the VO{sub 2}/TiO{sub 2} boundary. • The peculiar interface could be explained by the crystallographic relationship between the monoclinic and tetragonal phases. - Abstract: The basic morphology of phase-separated VO{sub 2} films, in which the tetragonal (metallic) phase coexists with the monoclinic (insulating) phase, was studied using transmission electron microscopy. While the phase transformation temperature in an unstrained crystal is approximately 340 K, it was observed that at 298 K, elastic strain (caused by lattice mismatch with the TiO{sub 2}-(001) substrate) stabilized the tetragonal phase near the VO{sub 2}/TiO{sub 2} boundary. The observed zig-zag-shaped interface of the tetragonal phase was explained by the crystallographic orientation relationship between the tetragonal and monoclinic phases. The observations provide valuable information for future applications of VO{sub 2} films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation on improved performance of Erbium doped TiO2 nanowire based UV detector

Highlights: • PL study showed the removal of oxygen defects of TiO{sub 2} material after Er doping. • Superior photosensitivity was obtained for Er:TiO{sub 2} NW based detector. • Detectivity and NEP were calculated for both undoped and doped detectors. • Photoswitching was observed for Er:TiO{sub 2} NW detector at 350 nm of wavelength. - Abstract: Undoped TiO{sub 2} and Erbium doped TiO{sub 2} nanowires (Er:TiO{sub 2} NWs) were synthesized on respective thin films using e-beam cum glancing angle deposition technique onto n-type silicon substrates. The length of the NWs was ∼182 nm as calculated from field emission gun scanning electron microscopy images. Transmission electron microscopy showed an average NW length of 173 nm. Polycrystalline nature of both samples was obtained from the selected area electron diffraction analysis as well as from the X-ray diffraction (XRD) analysis. Energy dispersive X-ray spectroscopy and variation in the grain size (calculated from XRD) confirmed the doping of Erbium in case of Er:TiO{sub 2} NWs. Increased absorption, as well as enhanced bandgap, was observed for Er:TiO{sub 2} NWs compared to the undoped TiO{sub 2} NWs. Superior device performance in terms of detectivity, sensitivity and photoswitching was obtained for Er:TiO{sub 2} NWs as compared to the undoped TiO{sub 2} NWs in the UV region.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Internal influences of hydrolysis conditions on rutile TiO2 pigment production via short sulfate process

Highlights: • A novel short sulfate process was proposed to produce rutile TiO{sub 2} pigment. • Effects and internal influences of hydrolysis conditions were investigated in detail. • Intrinsic relationship between hydrolysis conditions and pigment properties were revealed. - Abstract: Rutile TiO{sub 2} white pigment was prepared via short sulfate process by using the unenriched industrial TiOSO{sub 4} solution as titanium source through authigenic seed hydrolysis process. The effects and internal influences of hydrolysis conditions on the structure, particle size distribution and pigment properties for the as-synthesized samples were investigated, involving the inducing hydrolysis water volume ratio, ripening time and hydrolysis time after the second boiling point. These hydrolysis factors influenced the number and quality of the initial formed hydrolysis nuclei, the crystal growth and the particle aggregation velocity, eventually determined the pigment properties. And the conditions had internal mathematical regression correlation with crystal structure, particle polydispersity index and pigment properties. The optimal inducing hydrolysis water volume ratio is of 0.123, ripening time is of 29.05 min, and hydrolysis time is of 2.6 h.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

CdS quantum dots/Ti3+-TiO2 nanobelts heterojunctions as efficient visible-light-driven photocatalysts

Highlights: • A novel CdS QDs/Ti{sup 3+}-TiO{sub 2} nanobelts heterojunction photocatalyst is prepared. • It narrows the bandgap and extends the photoresponse to visible light region. • It exhibits excellent visible-light-driven photocatalytic performance. • It is due to synergistic effect of CdS QDs, Ti{sup 3+} self-doping and heterojunction. - Abstract: CdS quantum dots (QDs)/Ti{sup 3+}-TiO{sub 2} nanobelts heterojunctions as 0D/1D architectures are fabricated through hydrothermal-chemical bath deposition combine with in-situ solid-state chemical reduction approach. The CdS QDs of ∼7 nm are loaded on TiO{sub 2} nanobelts with width of 50–300 nm and several micrometers long, and the heterojunctions are formed efficiently. The prepared heterojunctions exhibit excellent photocatalytic performance for complete removal of methylene blue (∼99%) and hydrogen production efficiency (∼480.6 μmol h{sup −1}) under visible light irradiation, which are as high as 2 and 23 times than that of pristine TiO{sub 2} nanobelts. The enhancement is attributed to the Ti{sup 3+} self-doping and CdS QDs extend the photoresponse to visible light region and the formation of heterojunctions favor the spatial separation of photogenerated charge carriers. Therefore, the high-efficient 0D/1D heterojunction composites have potential applications in the field of environment and energy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

TiO2 nanotubes grown on Ti substrates with different microstructure

Highlights: • TiO{sub 2} nanotube layers were grown on four different Ti substrates by anodization. • Ti substrates with completely different microstructures were used. • The grain size of the substrates ranged from nanocrystalline to single-crystalline. • Differences between the nanotubes grown on these substrates were evaluated. • Similar nanotube dimensions were received on all Ti substrates. - Abstract: Four Ti substrates with various microstructures were investigated for the anodic growth of TiO{sub 2} nanotube layers: nanocrystalline and single-crystalline ingots as well as microcrystalline thick Ti sheets and microcrystalline thin Ti foils. All substrates were anodized in a conventional ethylene glycol based electrolyte under identical conditions. The resulting TiO{sub 2} nanotube layers were compared in dimensions and the consumption of Ti required for their growth. Unexpectedly, the results showed that on all substrates nanotube layers with a similar thickness and nanotube diameter, as well as a similar degree of ordering and after annealing the same crystallographic orientation of anatase were received, regardless the microstructures. However, the nanotube layers grown on a Ti sheet revealed a slightly higher thickness compared to the other substrates which were assigned to slower field-assisted dissolution rates due to different impurities found in this substrate compared to other ones.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Observation of oxo-bridged yttrium in TiO2 nanostructures and their enhanced photocatalytic hydrogen generation under UV/Visible light irradiations

Highlights: • Synthesis of yttrium doped TiO{sub 2} nanoparticles (NPs) and nanorods (NRs) through a facile wet chemical method. • The doped Y ions are found to be oxo-bridged with the host TiO{sub 2} through Y-O-Ti like formation. • The NPs of Y:TiO{sub 2} showed increased photocatalytic hydrogen production efficiency. • The observed efficiency of NPs is attributed to their three-dimensional confinement. - Abstract: Yttrium doped TiO{sub 2} (Y:TiO{sub 2}) nanoparticles (NPs) and nanorods (NRs) are synthesized using facile wet chemical methods. Interestingly, the doped Y ions are found to be oxo-bridged with the host TiO{sub 2} through Y-O-Ti like formation as confirmed from their XRD and XPS studies. The photocatalytic hydrogen production efficiency of the synthesized nanostructures was studied under UV and visible light irradiations. The NPs of Y:TiO{sub 2} showed increased activity as compared to NRs. The observed efficiency of NPs is attributed to their three-dimensional confinement, where it facilitated a stronger oxo-bridging formation that improved the metal-to-metal charge transfer process, reducing the band gap and surface energies as compared to NRs. As investigated in this study, the oxo-bridging formation in the doped metal-oxide systems is relatively promising as this configuration largely favors the photocatalytic process by re-designing the charge separation and transfer processes as compare to the other conventional systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Acid-free approach towards the growth of vertically aligned TiO2 nanorods as an efficient photoanode for dye-sensitized solar cells

Highlights: • Vertically aligned TiO{sub 2} NRs are fabricated by an acid-free hydrothermal approach. • Study the effect of TiO{sub 2} NRs growth parameters on its structural/optical properties. • The optimized TiO{sub 2} NRs were employed as an efficient photoanode for DSSCs. • An optimal PCE of 2.45% was achived by DSSC with TiO{sub 2} NRs with heights of ∼1.56 μm. - Abstract: We synthesized the closely packed titanium dioxide nanorods (TiO{sub 2} NRs) on fluorine-doped tin oxide (FTO) glass by a facile and cost-effective hydrothermal method. The TiO{sub 2} NRs were further utilized as a photoanode for dye-sensitized solar cells (DSSCs). For hydrothermal growth of TiO{sub 2} NRs, we utilized an acid-free reaction medium instead of a strong acidic medium, which can reduce the equipment cost as well as the environmental damages. Before employing these TiO{sub 2} NRs for DSSCs as a photoanode, the effects of hydrothermal growth parameters on the structural and optical characteristics of TiO{sub 2} NRs/FTO glass were investigated. Eventually, the TiO{sub 2} NRs with optimized height and diameter were employed to DSSCs and their photovoltaic characteristics were examined.

14 SOLAR ENERGY↗

A novel elaboration for various morphologies of three-layer TiO2 nanotubes by oxygen bubble mould

Highlights: • Three-layer TiO{sub 2} nanotubes with different morphologies were fabricated. • Some cavities inside middle barrier layer were observed for the first time. • Conventional three-stage current-time curves were transformed into four-stage curves. • Growing process of the three-layer nanotubes was explored systematically. - Abstract: A special three-layer TiO{sub 2} nanotube array has been successfully fabricated. The upper and lower porous layers were formed in the same fluoride-containing electrolyte, while the middle barrier layer was formed in fluoride-free electrolyte. By changing the applied voltage of middle barrier layer, the growth process of the lower layer was explored and compared systematically. The results show that at a critical voltage of barrier layer, the lower layer could barely be seen. Below the critical voltage, complete three-layer TiO{sub 2} nanotubes were achieved, but above the critical voltage, the lower layer failed to appear. Furthermore, some cavities inside the barrier layer were obtained under higher voltage of barrier layer and the conventional three-stage current-time curves were transformed into four-stage curves. Based on the oxygen bubble mould and electronic current model, an explanation for the formation of cavities is firstly proposed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fabrication of CdSe nanoparticles sensitized TiO2 nanotube arrays via pulse electrodeposition for photoelectrochemical application

Highlights: • Anodization method approach for the synthesis of TiO{sub 2} nanotubes. • CdSe nanoparticle/TiO{sub 2} nanotube arrays were assembled via pulse electrochemical deposition technique. • Duty cycles were applied in order to enhance the properties of CdSe/TiO{sub 2} nanostructure. • PEC analysis verified that CdSe/TiO{sub 2} structure prepared at 50% duty cycle gave best photocurrent response. • Photoconversion efficiency of CdSe/TiO{sub 2} nanostructure was approximately 59 times greater than TiO{sub 2} nanotubes. - Abstract: Solar energy is an alternative sustainable energy resource that can be harvested using photoelectrochemical cell comprised of inorganic sensitized nanostructured oxide semiconductor electrode. In this work, pulse electrodeposition was used to deposit CdSe onto titanium dioxide nanotube arrays (TiO{sub 2} NTAs). TiO{sub 2} NTAs are commonly used in the nanostructured photoelectrochemical cells due to their high surface area, fewer interfacial grain boundaries and excellent charge transfer between interfaces. Duty cycle of pulse electrodeposition played an important role in the formation of CdSe nanoparticles. A significant enhancement in the photoelectrochemical performance was observed for the heterostructure of CdSe/TiO{sub 2} NTAs. CdSe/TiO{sub 2} NTAs prepared at 50% duty cycle exhibited maximum photocurrent of 1.94 mA cm{sup −2} and photoconversion efficiency of 1.18% which was 59 times higher than bare TiO{sub 2} NTAs. These results demonstrated that significant enhancement in the photoconversion efficiency could be obtained by incorporating CdSe as sensitizer into the TiO{sub 2} nanotube arrays via pulse electrodeposition technique.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Upconversion Er-doped TiO2 nanorod arrays for perovskite solar cells and the performance improvement

Highlights: • Er-doped TiO{sub 2} nanorod absorbs IR and converts into visible light. • The introduction of Er could make a positive shift in flat-band potential. • Er-doped TiO{sub 2} solar cells show a 20% increment in the current density. - Abstract: Upconversion erbium-doped rutile TiO{sub 2} nanorod arrays were synthesized by a facile process and applied in perovskite solar cells (PSCs). The structure was characterized by X-ray powder diffraction (XRD). Energy dispersive spectrometer (EDS) and Tauc plot indicated that Er was successfully introduced and changed TiO{sub 2} band gap from 3.00 eV to 3.07 eV. The incorporation of Er shifts the flat band potential positively and enhances the electron density. The Er-doped TiO{sub 2} nanorods have a broad absorption in the infrared light and up-convert it into visible light, which provides a possibility for PSCs to use NIR light for higher performance. A higher photocurrent density (J{sub sc}) of 22.97 mA/cm{sup 2} and a power conversion efficiency (PCE) of 10.6% were obtained, showing 20% and 16.5% increment in J{sub sc} and PCE, respectively, when compared with the un-doped device. The performance improvement was ascribed to the upconversion performance, enhanced electron-injection efficiency and reduced charge recombination.

14 SOLAR ENERGY↗

Flame-made TiO2(B)

Highlights: • Flame-made titania can contain up to 27% TiO{sub 2}(B). • TiO{sub 2}(B) is present due to quenching. • The fraction of TiO{sub 2}(B) depends on residence time at high temperature. • Flame-made titania containing TiO{sub 2}(B) photocure epoxy more efficiently than P25. - Abstract: Titania nanoparticles containing both monoclinic (TiO{sub 2}(B) – a promising battery material and catalyst) and anatase crystal phases are synthesized with a low-cost, scalable flame spray pyrolysis (FSP) process, as confirmed by X-ray diffraction, transmission electron microscopy and Raman spectroscopy. The latter reveals TiO{sub 2}(B) contents of up to 27% in the crystalline phase fraction. The amount of TiO{sub 2}(B) increases as the time for nanoparticle growth in the flame decreases through quenching with ambient air. It can be controlled by varying the flow rates of precursor solution and dispersion oxygen into the flame. The FSP-made titania outperforms commercial titania P25 in the photocuring of epoxy, indicating its potential as a photocatalyst.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fabrication of high efficiency perovskite solar cells based on mesoporous TiO2 nanofibrous film under high humidity conditions

Highlights: • 1D TiO{sub 2} nanofibrous film was prepared by electrospinning technique as mesoporous of PSCs. • PSCs were fabricated under ambient conditions even with a high humidity condition more than 40%. • The 1D TiO{sub 2} nanofiber-based PSCs achieved a power conversion efficiency (PCE) about 11.6% compared with 7.5% whereas the 0D TiO{sub 2} nanoparticle-based PSCs only has 7.5%. - Abstract: One-dimensional (1D) TiO{sub 2} nanofibrous film with good morphology and electrical characteristics was prepared by electrospinning technique. And then perovskite solar cells (PSCs) were fabricated based on 2-μm-thick mesoporous TiO{sub 2} nanofibrous film under ambient conditions even with a high humidity condition more than 40%. The devices show high power conversion efficiency (PCE) due to high porosity that is beneficial to the loading of CH{sub 3}NH{sub 3}PbI{sub 3} perovskite layer. This high-porosity 1D TiO{sub 2} nanofibrous film also acts as a protection layer which can enhance the moisture stability of CH{sub 3}NH{sub 3}PbI{sub 3}. As a result, conversion efficiency of 11.6% and short-circuit current density (J{sub sc}) of 17.3 mA were achieved under 100 mW cm{sup −2} AM 1.5 G solar illumination. These two values are both higher than those of zero-dimensional (0D) TiO{sub 2} nanoparticulate film-based devices.

14 SOLAR ENERGY↗