SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Canada's history both in aviation and in satellite communications development spans several decades. The introduction of aeronautical mobile satellite communications will serve our requirements for airspace management in areas not served by line-of-sight radio and radar facilities. The ensuing improvements in air safety and operating efficiency are eagerly awaited by the aviation community.
The basic concept of remoting information to the cockpit is used to design and develop a computerized airborne traffic situation display device that automatically selects and presents segments of a controller's scope to the aircraft pilot via a narrow band digital data link. These data are integrated with aircraft heading and navigation information to provide a display useful in congested air space. The display can include alphanumerical symbols, air route maps, and controller instructions.
The impact of NO(x) from aircraft emissions, lightning and surface contributions on atmospheric nitrogen oxides and ozone has been investigated with the three-dimensional global chemistry transport model TM3 by partitioning the nitrogen oxides and ozone according to source category. The results have been compared with POLINAT II and SONEX airborne measurements in the North Atlantic flight corridor in 1997. Various cases have been investigated: measurements during a stagnant anti-cyclone and an almost cut-off low, both with expected high aircraft contributions, a southward bound flight with an expected strong flight corridor gradient and lightning contributions in the South, and a transatlantic flight with expected boundary layer pollution near the U.S. coast. The agreement between modeled results and measurements is reasonably good for NO and ozone. Also, the calculated impact of the three defined sources were consistent with the estimated exposure of the sampled air to these sources, obtained by specialized back-trajectory model products.
ATD-3 has developed four capabilities to address its goal and objectives. The four ATD-3 capabilities include: Dynamic Weather Routes (DWR), Multi-Flight Common Routes (MFCR), Traffic Aware Strategic Aircrew Requests (TASAR), and Dynamic Routes for Arrivals in Weather (DRAW). This document describes the long-term, mature vision for the use and incorporation of the ATD-3 capabilities into the National Airspace System (NAS). This vision describes their complementary interaction and the benefit capture that accrues from use. Recognizing that all capabilities are unlikely to be implemented in unison, each of the capabilities is designed and able to be implemented independently. As discrete portions of the integrated capabilities are planned, additional integration efforts should be undertaken to validate the complementary interactions and benefit pool are realized from the selected subset.
ATC and SST operations in terminal area simulation study involving airline crews and controllers in real time traffic situation
The proceedings of a conference on the Omega navigation system are presented. Three significant low frequency/very low frequency possibilities are considered as follows: (1) use of Worldwide (WW) Omega, (2) use of an Omega-like system optimized for aviation in the continental United States, (3) a mix use of WW Omega and Vor, U.S. Omega and VOR, and U.S./WW Omega. It is concluded that all possibilites can be tested with current plans for WW Omega.
Terminal-area guidance problems are solved in the form of computer-oriented algorithms. A flyable, three-dimensional trajectory is constructed that begins at the current aircraft position, heading, speed, and altitude, and that terminates at a prescribed position, heading, speed, altitude, and time. The terminal position is a waypoint and the terminal time is the assigned landing slot. The algorithms developed are applicable to all possible combinations of initial and final conditiions, and thus can be used in a closed-loop feedback law.
Analog and digital voice coding techniques for application to an L-band satellite-basedair traffic control (ATC) system for over ocean deployment are examined. In addition to performance, the techniques are compared on the basis of cost, size, weight, power consumption, availability, reliability, and multiplexing features. Candidate systems are chosen on the bases of minimum required RF bandwidth and received carrier-to-noise density ratios. A detailed survey of automated and nonautomated intelligibility testing methods and devices is presented and comparisons given. Subjective evaluation of speech system by preference tests is considered. Conclusion and recommendations are developed regarding the selection of the voice system. Likewise, conclusions and recommendations are developed for the appropriate use of intelligibility tests, speech quality measurements, and preference tests with the framework of the proposed ATC system.
An area-navigation method for automatic control of aircraft arriving in a random fashion from the en-route centers to the near terminal area is proposed. Control is exercised by a ground computer that sequences and schedules the aircraft. Altitude segregation is used to separate aircraft in velocity classes. Merging of all aircraft occurs near the outer marker. The merging region is designed so that no near misses will occur if the aircraft follow the assigned trajectories.
The analysis and design procedure of an antenna for a CW Doppler radar system being developed for pilot warning of midair collision hazards is presented. The antenna consists of two vertical arrays of half-wavelength dipoles mounted near a circular conducting cylinder. Each vertical array is composed of three vertical dipoles. Each array provides relatively uniform illumination (2.3 dB) in the forward 180-deg angular segment of the horizontal plane and approximately plus or minus 10 to 15 deg coverage in the vertical plane. The antenna could be used in a two-mode operation, either in a standard monopulse radar system (sum and difference amplitude patterns) or in a system where amplitude and phase are the measurable quantities.
A guidance technique has been developed for flying an aircraft automatically along curved trajectories. The technique consists of a set of algorithms for automatically synthesizing flight profiles, i.e., the horizontal trajectory, the altitude and speed profiles, and a time sequence of commands. The flyability of the synthesized profile under wind disturbances and initial conditions error is verified by closing the loop around the synthesized trajectory and flying it in a computer-simulated jet aircraft. A control law having longitudinal, lateral, and heading deviation from the synthesized profile in the feedback loops is used for the simulated flight. The performance of the system is excellent, errors that are initially zero never exceed 230 ft, and large initial errors are reduced rapidly. The system also behaves quite well under wind disturbance.
A new guidance technique, referred to as 4-D guidance, is being developed to improve the operation of future STOL aircraft transportation systems. 4-D guidance refers to a technique of synthesizing a complex three-dimensional flight path from simple pilot inputs and flying the aircraft along the path according to an ATC specified time schedule. The two major elements of a 4-D guidance system are the trajectory synthesizer and the control law for flying the aircraft along the synthesized trajectory using the aircraft's autopilot and autothrottle. Inputs to the trajectory synthesizer are the three-dimensional coordinates of waypoints, the turning radius, the speed range, the acceleration limits and the arrival time at time control waypoints. First the three-dimensional trajectory is computed using circular arcs and straight lines. Then the airspeed profile, compensated for wind, is calculated to achieve the desired arrival times. The pilot is informed if the arrival times cannot be achieved. The synthesized trajectory is stored as a time sequence of reference states and controls which the aircraft is forced to track using a linear feedback law.
Theoretical development and computer implementation of three guidance algorithms are presented. From a small set of input parameters the algorithms generate the ground track, altitude profile, and speed profile required to implement an experimental 4-D guidance system. Given a sequence of waypoints that define a nominal flight path, the first algorithm generates a realistic, flyable ground track consisting of a sequence of straight line segments and circular arcs. Each circular turn is constrained by the minimum turning radius of the aircraft. The ground track and the specified waypoint altitudes are used as inputs to the second algorithm which generates the altitude profile. The altitude profile consists of piecewise constant flight path angle segments, each segment lying within specified upper and lower bounds. The third algorithm generates a feasible speed profile subject to constraints on the rate of change in speed, permissible speed ranges, and effects of wind. Flight path parameters are then combined into a chronological sequence to form the 4-D guidance vectors. These vectors can be used to drive the autopilot/autothrottle of the aircraft so that a 4-D flight path could be tracked completely automatically; or these vectors may be used to drive the flight director and other cockpit displays, thereby enabling the pilot to track a 4-D flight path manually.
The effects of alternative traffic management possibilities on task performance and pilot controller verbal workloads were studied. Two new rule structures - sequencing and advisory - in addition to vectoring were studied in conjunction with CRT pilot displays incorporating traffic situation displays with and without aircraft flight path predictors. The sequencing and advisory systems gave increasing control responsibility to the pilots. It was concluded that distributed management systems could in practice significantly reduce controller verbal workload without reducing system performance. Implications of this conclusion suggest that distributed management would allow controllers to handle a larger volume of traffic safely either as a normal operating procedure or as a failure mode alternative in a highly automated ground centered system.
Explore the source record for details and available documents.
Results of an experimental and theoretical study on dose equivalent rates at high altitudes are presented. The flight personnel flying 500 hours per year at SST cruise altitude in high latitudes (maximum of radiation) would be exposed to less than 14% of the maximum permissible dose rate (MPD) for radiation workers (5 rem/yr), averaged over the solar cycle. One-half or more is due to energetic secondary neutrons that are penetrant and highly biologically effective. Passengers would, in general, be exposed only to the low-level galactic cosmic rays, except for a relative few who encounter rare, intense, and energetic solar-particle events. If the airplane descends to subsonic altitudes during events such as that of Feb. 23, 1956 - the most intense and unique giant energy event of the last 35 years - passenger exposure even then remains at or below permissible levels (0.5 rem for the general population). Systems of radiation monitoring are briefly discussed which will prevent false alarms and which would be useful in disproving overexposure in potential malpractice suits against the airlines. In subsonic jet transports the exposure of the crews is lower by a factor 3 to 4; for passengers it is about the same for the same distance traveled. Solar events, except for giant energy events, will yield only a minor fraction of the MPD of the general population.
Final user requirements defined for the Voice Switching and Control System (VSCS) to be implemented for ATC functions as part of the Area Control Facility (ACF) concept for the National Airspace System (NAS) are described. The VSCS will be communications equipment at operational stations, supervisory positions, and support systems, the switching system itself, and interfaces between the VSCS and other systems. Supervisory users will include the Area Manager, Traffic Management Coordinator, a Military Operations Specialists, a Weather Coordinator, a NAS manager, Maintenance, and a flight Data Communications Specialist. The VSCS will supply computerized communications capability within and among ATC centers. Details of the efforts used to define the system requirements are recounted, noting the heavy reliance on recommendations from active ATC personnel.
Conceptual system controls aircraft with old and new guidance equipment. Report begins with overview of concept, then reviews controller-interactive simulations. Describes fuel-conservative-trajectory algorithm, based on equations of motion for controlling landing time. Finally, presents results of piloted simulations.