Search NASA⌕ Search

SEARCH · Search NASA

Results for “correlation selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Charge Transfer and Support Effects in Heterogeneous Catalysis

The kinetic, electronic and spectroscopic properties of two-dimensional oxide-supported catalysts were investigated in order to understand the role of charge transfer in catalysis. Pt/TiO 2 nanodiodes were fabricated and used as catalysts for hydrogen oxidation. During the reaction, the current through the diode, as well as its I-V curve, were monitored, while gas chromatography was used to measure the reaction rate. The current and the turnover rate were found to have the same temperature dependence, indicating that hydrogen oxidation leads to the non-adiabatic excitation of electrons in Pt. A fraction of these electrons have enough energy to ballistically transport through Pt and overcome the Schottky barrier at the interface with TiO 2 . The yield for this phenomenon is on the order of 10 -4 electrons per product molecule formed, similar to what has been observed for CO oxidation and for the adsorption of many different molecules. The same Pt/TiO 2 system was used to compare currents in hydrogen oxidation and deuterium oxidation. The current through the diode under deuterium oxidation was found to be greater than under hydrogen oxidation by a factor of three. Weighted by the difference in turnover frequencies for the two isotopes, this would imply a chemicurrent yield 5 times greater for D 2 compared to H 2 , contrary to what is expected given the higher mass of D 2 . Reversible changes in the rectification factor of the diode are observed when switching between D 2 and H 2 . These changes are a likely cause for the differences in current between the two isotopes. In the nanodiode experiments, surface chemistry leads to charge flow, suggesting the possibility of creating charge flow to tune surface chemistry. This was done first by exposing a Pt/Si diode to visible light while using it as a catalyst for H 2 oxidation. Absorption of the light in the Si, combined with the band bending at the interface, gives rise to a steady-state flow of hot holes to the surface. This leads to a decrease in turnover on the surface, an effect which is enhanced when a reverse bias is applied to the diode. Similar experiments were carried out for CO oxidation. On Pt/Si diodes, the reaction rate was found to increase when a forward bias was applied. When the diode was exposed to visible light and a reverse bias was applied, the rate was instead decreased. This implies that a flow of negative charges to the surface increases turnover, while positive charges decrease it. Charge flow in an oxide supported metal catalyst can be modified even without designing the catalyst as a solid state electronic device. This was done by doping stoichiometric and nonstoichiometric TiO 2 films with F, and using the resulting oxides as supports for Pt films. In the case of stoichiometric TiO 2 , F was found to act as an n-type dopant, creating a population of filled electronic states just below the conduction band, and dramatically increasing the conductivity of the oxide film. The electrons in those states can transfer to surface O, activating it for reaction with CO, and leading to increased turnover for CO oxidation. This reinforces the hypothesis that CO oxidation is activated by a flow of negative charges to the surface. The same set of catalysts was used for methanol oxidation. The electronic properties of the TiO 2 films again correlated with the turnover rates, but also with selectivity. With stoichiometric TiO 2 as the support, F-doping caused an increase in selectivity toward the formation of partial oxidation products, formaldehyde and methyl formate, versus the total oxidation product, CO 2 . With non-stoichiometric TiO 2 , F-doping had the reverse effect. Ambient Pressure X-Ray Photoelectron Spectroscopy was used to investigate this F-doping effect in reaction conditions. In O 2 alone, and in CO oxidation conditions, the O1s spectrum showed a high binding energy peak that correlated in intensity with the activity of the different films: for stoichiometric films, the peak decreased in intensity with F-doping, while for nonstoichiometric films, the opposite was observed. No such changes were visible in the C1s spectrum, confirming the role of O activation in the reaction. This thesis adds to the body of knowledge on the importance of charge transfer at the metal-oxide interface in shaping the reactivity of heterogeneous catalysts, and provides examples of how this can be the basis for new methods to tune reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Correlation of Mesoscale Humidity Anomalies With Mesoscale Organization of Marine Stratocumulus From Observations Over the ARM Eastern North Atlantic Site

The structure of mesoscale cellular organization in marine cloud-topped boundary layers is found to be well characterized by using a novel compositing approach based on mesoscale variations in the column water vapor path (WVP). The approach is applied to ground-based observations from the Atmospheric Radiation Measurement (ARM) Eastern North Atlantic site. Based on a set of satellite and ground-based observational criteria, 381 hr of closed-cell and 227 hr of open-cell cases were selected from late 2015 to early 2018. Strong correlations are found between mesoscale-filtered cloud properties and WVP for both closed-cell and open-cell regimes. In the moist atmospheric columns, the clouds are thicker with higher tops and lower bases, and stronger precipitation compared to that in the dry columns. Overall, cloud properties of open and closed cells covary similarly with mesoscale moisture perturbations, except that the correlation of liquid water path with WVP is much weaker for open cells. The relations of subcloud properties with WVP are also examined. In the moist columns, surface equivalent potential temperature and relative humidity are higher than in the dry columns. A marginally negative correlation between mesoscale-filtered subcloud turbulence eddy dissipation rate and WVP is found for closed cells. These results are consistent with the conceptual model of closed cellular mesoscale circulations of Zhou and Bretherton (2019).

54 ENVIRONMENTAL SCIENCES↗

A REDSHIFT SURVEY OF HERSCHEL FAR-INFRARED SELECTED STARBURSTS AND IMPLICATIONS FOR OBSCURED STAR FORMATION

We present Keck spectroscopic observations and redshifts for a sample of 767 Herschel-SPIRE selected galaxies (HSGs) at 250, 350, and 500 {mu}m, taken with the Keck I Low Resolution Imaging Spectrometer and the Keck II DEep Imaging Multi-Object Spectrograph. The redshift distribution of these SPIRE sources from the Herschel Multitiered Extragalactic Survey peaks at z = 0.85, with 731 sources at z < 2 and a tail of sources out to z {approx} 5. We measure more significant disagreement between photometric and spectroscopic redshifts (({Delta}z/(1 + z{sub spec})) = 0.29) than is seen in non-infrared selected samples, likely due to enhanced star formation rates and dust obscuration in infrared-selected galaxies. The infrared data are used to directly measure integrated infrared luminosities and dust temperatures independent of radio or 24 {mu}m flux densities. By probing the dust spectral energy distribution (SED) at its peak, we estimate that the vast majority (72%-83%) of z < 2 Herschel-selected galaxies would drop out of traditional submillimeter surveys at 0.85-1 mm. We find that dust temperature traces infrared luminosity, due in part to the SPIRE wavelength selection biases, and partially from physical effects. As a result, we measure no significant trend in SPIRE color with redshift; if dust temperature were independent of luminosity or redshift, a trend in SPIRE color would be expected. Composite infrared SEDs are constructed as a function of infrared luminosity, showing the increase in dust temperature with luminosity, and subtle change in near-infrared and mid-infrared spectral properties. Moderate evolution in the far-infrared (FIR)/radio correlation is measured for this partially radio-selected sample, with q{sub IR}{proportional_to}(1 + z){sup -0.30{+-}0.02} at z < 2. We estimate the luminosity function and implied star formation rate density contribution of HSGs at z < 1.6 and find overall agreement with work based on 24 {mu}m extrapolations of the LIRG, ULIRG, and total infrared contributions. This work significantly increased the number of spectroscopically confirmed infrared-luminous galaxies at z >> 0 and demonstrates the growing importance of dusty starbursts for galaxy evolution studies and the build-up of stellar mass throughout cosmic time.

79 ASTRONOMY AND ASTROPHYSICS↗

Discerning structure sensitivity of Ni-core Pd-shell nanoparticles for enhanced nitrite reduction

Denitrification using Pd-based catalysts converts N-oxyanions into harmless products. However, the metal cost and scarcity are barriers to application. In this work, we synthesize water-suspended, structure-controlled Ni-core/Pd-shell nanoparticles (Ni@Pd NPs) that show Pd-catalyzed nitrite (NO 2 − ) reduction catalysis promoted by Ni. The NPs immobilized on Al 2 O 3 (0.47 wt % Pd and 0.74 wt % Ni) have higher NH 4 + selectivity and higher catalytic activity than wet-impregnated Pd/Al 2 O 3 (1.0 wt % Pd), i.e., 315.4 vs. 132.1 Lg surface Pd −1 min −1 . X-ray photoelectron spectroscopy (XPS) and CO-diffuse reflectance infrared Fourier transform spectroscopy (CO-DRIFTS) analyses show that Ni increases Pd electron density, which is proposed to lower the bond dissociation energy barrier for nitric oxide surface intermediate. Low-coordinated Pd atoms correlate to high activity and low NH 4 + selectivity. Using CatCost software, we estimate Ni@Pd/Al 2 O 3 to have a ∼40% lower manufacturing cost compared to wet-impregnated Pd/Al 2 O 3 . This rationally designed catalyst illustrates how nickel promotes Pd catalysis and how Pd usage can be lowered for denitrification and other hydrogenation reactions.

CO-DRIFTS↗

Radio–far-infrared correlation in “blue cloud” galaxies with 0 < z < 1.2

We study the radio–far-infrared (FIR) correlation in “blue cloud” galaxies chosen from the PRism MUltiobject Survey up to redshift (z) of 1.2 in the XMM-LSS field. We use rest-frame emission at 1.4 GHz in the radio and both monochromatic (at 70 μm) and bolometric (between 8 and 1000 μm) emission in the FIR. To probe the nature of the correlation up to z ∼1.2, where direct detection of blue star-forming galaxies is impossible with current technology, we employ the technique of image stacking at 0.325 and 1.4 GHz in the radio and in six infrared bands, 24, 70, 160, 250, 350, and 500 μm. For comparison, we also study the correlation for more luminous galaxies that are directly detected. The stacking analysis allows us to probe the radio–FIR correlation for galaxies that are up to two orders of magnitude fainter than the ones detected directly. The k correction in the infrared wavebands is obtained by fitting the observed spectral energy distribution with a composite mid-IR power law and a single temperature graybody model. We find that the radio luminosity at 1.4 GHz (L{sub 1.4 GHz}) is strongly correlated with monochromatic FIR luminosity at 70 μm (L{sub 70 μm}) having slope 1.09 ± 0.05 and with bolometric luminosity (L{sub TIR}) having slope 1.11 ± 0.04. The quantity q{sub TIR}(=log{sub 10}[L{sub TIR}/(3.75×10{sup 12}L{sub 1.4 GHz})]) is observed to decrease with redshift as q{sub TIR}∝(1+z){sup −0.16±0.03} probably caused due to the nonlinear slope of the radio–FIR correlation. Within the uncertainties of our measurement and the limitations of our flux-limited and color-selected sample, we do not find any evolution of the radio–FIR correlation with redshift.

79 ASTRONOMY AND ASTROPHYSICS↗

Correlating furfural reaction pathways with interactions between furfural and monometallic surfaces

Controlling the selectivity of furfural reaction is an important step towards valorizing this important platform chemical in biomass conversion. Previous studies speculate that the selectivity of furfural reaction depends on the interactions of furan ring with metal surfaces. In this work, high resolution electron energy loss spectroscopy (HREELS) and temperature programmed desorption (TPD) are employed to directly study the correlations between furfural reaction pathways and interactions between furfural and different monometallic surfaces. Monometallic surfaces with strong ring interactions favor ring-opening products, while monometallic surfaces with weak ring interactions favor furan production. Oxophilic metal surface like Fe(110) promotes the hydrodeoxygenation pathway to produce 2-methylfuran due to strong interaction with the carbonyl group. Furthermore, these results should provide guidance in the future catalyst design for converting furfural to value-added products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiparticle correlations, cumulants, and moments sensitive to fluctuations in rare-probe azimuthal anisotropy in heavy ion collisions

Correlations of two or more particles have been an essential tool for understanding the hydrodynamic behavior of the quark-gluon plasma created in ultrarelativistic nuclear collisions. In this work, we extend that framework to introduce a mathematical construction of multiparticle correlators that utilize correlations between arbitrary numbers of particles of interest (e.g., particles selected for their strangeness, heavy flavor, and conserved charges) and inclusive reference particles to estimate the azimuthal anisotropies of rare probes. To estimate the fluctuations and correlations in the azimuthal anisotropies of these particle of interest, we use these correlators in a system of cumulants, raw moments, and central moments. Finally, we introduce two classes of observables that can compare the fluctuations in the azimuthal anisotropies of particles of interest with reference particles at each order.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

TYPE Ia SUPERNOVA PROPERTIES AS A FUNCTION OF THE DISTANCE TO THE HOST GALAXY IN THE SDSS-II SN SURVEY

We use Type Ia supernovae (SNe Ia) discovered by the Sloan Digital Sky Survey-II SN Survey to search for dependencies between SN Ia properties and the projected distance to the host-galaxy center, using the distance as a proxy for local galaxy properties (local star formation rate, local metallicity, etc.). The sample consists of almost 200 spectroscopically or photometrically confirmed SNe Ia at redshifts below 0.25. The sample is split into two groups depending on the morphology of the host galaxy. We fit light curves using both MLCS2K2 and SALT2, and determine color (A{sub V} , c) and light-curve shape ({Delta}, x{sub 1}) parameters for each SN Ia, as well as its residual in the Hubble diagram. We then correlate these parameters with both the physical and the normalized distances to the center of the host galaxy and look for trends in the mean values and scatters of these parameters with increasing distance. The most significant (at the 4{sigma} level) finding is that the average fitted A{sub V} from MLCS2K2 and c from SALT2 decrease with the projected distance for SNe Ia in spiral galaxies. We also find indications that supernovae (SNe) in elliptical galaxies tend to have narrower light curves if they explode at larger distances, although this may be due to selection effects in our sample. We do not find strong correlations between the residuals of the distance moduli with respect to the Hubble flow and the galactocentric distances, which indicates a limited correlation between SN magnitudes after standardization and local host metallicity.

79 ASTRONOMY AND ASTROPHYSICS↗

Quantum chemistry benchmarking of binding and selectivity for lanthanide extractants

Computer-aided screening methods facilitate the discovery of new extractants for heavy and rare-earth metal separations. In this work, we have benchmarked the accuracy of different quantum chemistry methods for calculating extractant binding energies and selectivities. Specifically, we compare calculated data from different exchange correlation functionals (B3LYP-D3, ωB97X-D3, and M06-L) and different basis sets (including large-core effective core potentials and all-electron basis sets). We report aqueous-phase binding energy and selectivity trends for 1:1 and 3:1 extractant/lanthanide models for the complexes. We find that binding selectivities are not particularly sensitive to model chemistry, but binding energies are sensitive. Furthermore, calculated trends in selectivity using 3:1 extractant/lanthanide models are in better agreement with available experimental trends than trends using 1:1 extractant/lanthanide models. Lastly, we find that the B3LYP-D3/6-31 + G* model chemistry with the Stuttgart large-core relativistic effective core potentials on the lanthanide sufficiently reproduces results from larger basis set calculations and is confirmed as suitable for relatively fast and efficient screening of lanthanide binding energies and selectivities.

36 MATERIALS SCIENCE↗

Highly correlated configuration interaction calculations on water with large orbital bases

A priori selected configuration interaction (SCI) with truncation energy error [C. F. Bunge, J. Chem. Phys. 125, 014107 (2006)] and CI by parts [C. F. Bunge and R. Carbó-Dorca, J. Chem. Phys. 125, 014108 (2006)] are used to approximate the total nonrelativistic electronic ground state energy of water at fixed experimental geometry with CI up to sextuple excitations. Correlation-consistent polarized core-valence basis sets (cc-pCVnZ) up to sextuple zeta and augmented correlation-consistent polarized core-valence basis sets (aug-cc-pCVnZ) up to quintuple zeta quality are employed. Truncation energy errors range between less than 1 μhartree, and 100 μhartree for the largest orbital set. Coupled cluster CCSD and CCSD(T) calculations are also obtained for comparison. Our best upper bound, −76.4343 hartree, obtained by SCI with up to sextuple excitations with a cc-pCV6Z basis recovers more than 98.8% of the correlation energy of the system, and it is only about 3 kcal/mol above the “experimental” value. Despite that the present energy upper bounds are far below all previous ones, comparatively large dispersion errors in the determination of the extrapolated energies to the complete basis set do not allow to determine a reliable estimation of the full CI energy with an accuracy better than 0.6 mhartree (0.4 kcal/mol)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Redshift-dependent RSD bias from intrinsic alignment with DESI Year 1 spectra

ABSTRACT We estimate the redshift-dependent, anisotropic clustering signal in the Dark Energy Spectroscopic Instrument (DESI) Year 1 Survey created by tidal alignments of Luminous Red Galaxies (LRGs) and a selection-induced galaxy orientation bias. To this end, we measured the correlation between LRG shapes and the tidal field with DESI’s Year 1 redshifts, as traced by LRGs and Emission-Line Galaxies. We also estimate the galaxy orientation bias of LRGs caused by DESI’s aperture-based selection, and find it to increase by a factor of seven between redshifts 0.4−1.1 due to redder, fainter galaxies falling closer to DESI’s imaging selection cuts. These effects combine to dampen measurements of the quadrupole of the correlation function (ξ2) caused by structure growth on scales of 10–80 h−1 Mpc by about 0.15 per cent for low redshifts (0.4 < z < 0.6) and 0.8 per cent for high (0.8 < z < 1.1), a significant fraction of DESI’s error budget. We provide estimates of the ξ2 signal created by intrinsic alignments that can be used to correct this effect, which is necessary to meet DESI’s forecasted precision on measuring the growth rate of structure. While imaging quality varies across DESI’s footprint, we find no significant difference in this effect between imaging regions in the Legacy Imaging Survey.

79 ASTRONOMY AND ASTROPHYSICS↗

Charge correlations and isotopic distributions of projectile fragmentation events in {sup 124}Xe+{sup 112}Sn at E/A=50 MeV

Ternary breakup of an excited projectile-like fragment produced in mid-peripheral collisions of {sup 124}Xe projectiles with {sup 112}Sn nuclei at E/A=50 MeV is examined. Charge correlations reveal that symmetric breakups occur with significant probability. By selecting on the parallel velocity of the heaviest fragment we minimize the entrance channel dynamics. Calculations with the statistical decay code GEMINI failed to reproduce the experimental charge correlations for any suitable combination of excitation energy and spin considered. A statistical multifragmentation model (SMM) in which breakup of low-density nuclear matter is assumed was able to reproduce the observed charge correlations. The <N>/Z and isotope distributions of fragments were compared to the results of the SMM calculations. Describing the <N>/Z of heavy fragments (Z>6) within SMM suggests that a reduction of the symmetry energy parameter from {gamma}=25 to 14 MeV is necessary. We observe that the yield of neutron-rich isotopes of heavy fragments is particularly sensitive to the symmetry energy.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Differential two-particle number and momentum correlations with the AMPT, UrQMD, and EPOS models in Pb-Pb collisions at s N N = 2.76 TeV

We report studies of charge-independent and charge-dependent two-particle differential number correlation functions, R 2 (Δη,Δφ), and transverse momentum correlation functions, P 2 (Δη,Δφ), of charged particles produced in Pb–Pb collisions at the LHC center-of-mass energy √sNN= 2.76 TeV with the UrQMD, AMPT, and EPOS models. Model calculations for R2 and P2 correlation functions are presented for inclusive charged hadrons (h ± ) in selected transverse momentum ranges and with full azimuthal coverage in the pseudorapidity range |η|<1.0. We compare these calculations for the strength, shape, and particularly the width of the correlation functions with recent measurements of these observables by the ALICE collaboration. Our analysis indicates that comparative studies of R 2 and P 2 correlation functions provide valuable insight towards the understanding of particle production in Pb–Pb collisions. We find, in particular, that these models produce quantitatively different magnitudes and shapes for these correlation functions and none reproduce the results reported by the ALICE collaboration. Accounting for quantum number conservation in models, particularly charge conservation, is mandatory to reproduce the detailed measurements of number and transverse momentum correlation functions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Thermal Wear Sensing System: Proof of the Concept

A technique for wear sensing using a sacrificial layer with specific material properties has been developed successfully. This is achieved by recording the temperature evolution underneath the sacrificial organic layer during sliding tests, and by correlating the recorded temperature with a wear depth. Finite element modeling was used to calculate the contact temperature which spreads through the sacrificial layer under different sliding test conditions. Numerical simulation was used to determine the optimal parameters for the best correlation between temperature and wear depth. These parameters were used to select the appropriate sacrificial layer for wear sensing. Thus, an epoxy layer was implemented and experimental measurements were carried out to check the correlation between the measured temperature underneath the epoxy layer and wear depth. It was found that a low thermal conductivity of the sacrificial layer of less than 1 W/m K and a relative high thermal conductivity of the substrate, namely more than 4 W/m K are the optimal parameters for our thermal wear sensing system. The thickness of the sacrificial layer is also a crucial parameter and has to be taken into account when designing such a sensing system.

36 MATERIALS SCIENCE↗

3D Deep Learning Joint Inversion of Active Seismic Full Waveform and Passive Seismic Traveltime Data for Reservoir Imaging and Uncertainty Quantification

Here, we present deep learning (DL) networks for three-dimensional (3D) joint inversion of active seismic full waveform and passive seismic traveltime data to image reservoirs and their properties and quantify imaging uncertainties. Active seismic full-waveform data can provide high-resolution monitoring images but are collected only intermittently because of their high acquisition cost. In contrast, passive seismic data can be gathered at relatively low cost between regular active surveys, although their imaging quality can be compromised by factors such as low signal-to-noise ratios and limited ray coverage of the target. Although these datasets are routinely acquired together at CO 2 storage sites, their combined inversion within a 3D DL framework has not been previously demonstrated. To our knowledge, this is the first study to address this gap, combining the strength of both data types. For efficient data storage and DL training with large 3D seismic datasets, we use a 3D data matrix in which a random number of passive seismic traveltime data are stored as parabolic envelopes using one-hot encoding and a 3D full-waveform data matrix in which multiple shot gathers are summed. Two network architectures are evaluated: a single-encoder U-Net for single-data type inversion and a dual-encoder U-Net for joint inversion of active and passive seismic data. We also evaluate the single-encoder U-Net for joint inversion by concatenating full-waveform data and traveltime data. We propose a systematic approach for selecting an optimal dropout rate that balances regularization during training and Monte Carlo dropout-based uncertainty quantification during prediction by examining the correlation coefficient between standard deviation and prediction error, along with the training misfit, across a range of dropout rates. 3D DL inversion experiments include five different network configurations, with evaluations under ideal, noisy and dropout-enabled conditions. Both model and data uncertainties are assessed, as well as their combined effects. Across all conditions, the networks consistently predict accurate CO 2 saturation models with low prediction errors, such as a structural similarity index of 0.993 and CO 2 difference of 1.1%. Uncertainty estimates show strong spatial correlation with prediction errors, confirming the effectiveness of the proposed dropout selection approach. The results demonstrate that our DL approach, utilizing compact data representations and appropriate uncertainty quantification, yields accurate subsurface images under various inversion conditions and provides valuable insights into the reliability of predictions.

Um, Evan Schankee [Lawrence Berkeley National Labo↗

Melting rate correlation with batch properties and melter operating conditions during conversion of nuclear waste melter feeds to glasses

The rate of conversion of nuclear waste melter feed to glass is affected by the selection of melter feed materials and by melter design and operation. The melting rate correlation (MRC) is an equation that relates the glass production rate with two types of variables: (1) feed and melt properties: conversion heat, cold-cap bottom temperature, and glass melt viscosity; and (2) melter design and operation parameters: melter geometry, melter operating temperature, and gas bubbling rate. The MRC shows good agreement for an extended melting-rate data set of high-level waste (HLW) melter feeds and a data set generated for low-activity waste (LAW) melter feeds. Laboratory observation of heated melter feed samples is often used to assess the cold-cap bottom temperature of HLW melter feeds (moderately foaming feeds), but this technique appears inadequate for LAW melter feeds (vigorously foaming feeds). For LAW feeds, an adequate assessment of the cold-cap bottom temperature was achieved using evolved gas analysis, which allows identification of the collapse of primary foam for oxidized feeds. This assessment shows that the cold-cap bottom temperature for vigorously foaming LAW feeds is higher than that for moderately foaming HLW feeds. When the results of MRC are compared, LAW feeds are generally less sensitive to the bubbling rate and melt viscosity, and more sensitive to the cold-cap bottom temperature than HLW feeds. The MRC qualifies as a promising tool to support the selection of melter feed materials and melter operating conditions, which is determined from expensive independent scaled melter experiments, and sophisticated mathematical models.

Lee, Seung Min↗

Embracing disorder in quantum materials design

Many of the most exciting materials discoveries in fundamental condensed matter physics are made in systems hosting some degree of intrinsic disorder. While disorder has historically been regarded as something to be avoided in materials design, it is often of central importance to correlated and quantum materials. This is largely driven by the conceptual and theoretical ease to handle, predict, and understand highly uniform systems that exhibit complex interactions, symmetries, and band structures. In this Perspective, we highlight how flipping this paradigm has enabled exciting possibilities in the emerging field of high entropy materials, focusing primarily on high entropy oxide and chalcogenide quantum materials. These materials host high levels of cation or anion compositional disorder while maintaining unexpectedly uniform single crystal lattices. The diversity of atomic scale interactions of spin, charge, orbital, and lattice degrees of freedom are found to emerge into coherent properties on much larger length scales. Thus, altering the variance and magnitudes of the atomic scale properties through elemental selection can open new routes to tune global correlated phases, such as magnetism, metal–insulator transitions, ferroelectricity, and even emergent topological responses. The strategy of embracing disorder in this way provides a much broader pallet from which functional states can be designed for next-generation microelectronic and quantum information systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Embracing Disorder in Quantum Materials Design

Many of the most exciting materials discoveries in fundamental condensed matter physics are made in systems hosting some degree of intrinsic disorder. While disorder has historically been regarded as something to be avoided in materials design, it is often of central importance to correlated and quantum materials. This is largely driven by the conceptual and theoretical ease to handle, predict, and understand highly uniform systems that exhibit complex interactions, symmetries, and band structures. In this Perspective, we highlight how flipping this paradigm has enabled exciting possibilities in the emerging field of high entropy materials, focusing primarily on high entropy oxide and chalcogenide quantum materials. These materials host high levels of cation or anion compositional disorder while maintaining unexpectedly uniform single crystal lattices. The diversity of atomic scale interactions of spin, charge, orbital, and lattice degrees of freedom are found to emerge into coherent properties on much larger length scales. Thus, altering the variance and magnitudes of the atomic scale properties through elemental selection can open new routes to tune global correlated phases, such as magnetism, metal–insulator transitions, ferroelectricity, and even emergent topological responses. The strategy of embracing disorder in this way provides a much broader pallet from which functional states can be designed for next-generation microelectronic and quantum information systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗