Results for “data holdings” — Page 23

NASA NTRS1979

Electrical Evaluation of RCA MWS5001D Random Access Memory, Volume 5, Appendix D

The electrical characterization and qualification test results are presented for the RCA MWS 5001D random access memory. The tests included functional tests, AC and DC parametric tests, AC parametric worst-case pattern selection test, determination of worst-case transition for setup and hold times, and a series of schmoo plots. Average input high current, worst case input high current, output low current, and data setup time are some of the results presented.

Klute, A.↗

NASA NTRS1985

Cosmic-ray picture of the heliosphere

The existing data base on the characteristics of the heliosphere is discussed. It is known that solar gravity is less than necessary to hold all the solar material, and therefore a supersonic solar wind exists. Skylab soft X-ray photographs revealed the existence of coronal holes, which evolve in an 11 yr cycle. It has been proposed that all but the highest energy cosmic rays detected on earth can be attributed to solar and heliospheric origins, a controversial view which requires further empirical and theoretical work on particle acceleration processes and regions of interaction of the solar wind with interplanetary plasma. It is possible that a warped solar current sheet stretches to interplanetary space and organizes the solar magnetic field and thereby guides cosmic rays. An inverse correlation has been identified between the sunspot cycle and cosmic ray intensity. The features and effects of solar flares, subsequent shock waves and high speed particle streams are also discussed.

Venkatesan, D.↗

NASA NTRS2005

Collection Efficiency and Ice Accretion Characteristics of Two Full Scale and One 1/4 Scale Business Jet Horizontal Tails

Collection efficiency and ice accretion calculations have been made for a series of business jet horizontal tail configurations using a three-dimensional panel code, an adaptive grid code, and the NASA Glenn LEWICE3D grid based ice accretion code. The horizontal tail models included two full scale wing tips and a 25 percent scale model. Flow solutions for the horizontal tails were generated using the PMARC panel code. Grids used in the ice accretion calculations were generated using the adaptive grid code ICEGRID. The LEWICE3D grid based ice accretion program was used to calculate impingement efficiency and ice shapes. Ice shapes typifying rime and mixed icing conditions were generated for a 30 minute hold condition. All calculations were performed on an SGI Octane computer. The results have been compared to experimental flow and impingement data. In general, the calculated flow and collection efficiencies compared well with experiment, and the ice shapes appeared representative of the rime and mixed icing conditions for which they were calculated.

Bidwell, Colin S.↗

NASA NTRS2006

Large-Scale Hybrid Motor Testing

Hybrid rocket motors can be successfully demonstrated at a small scale virtually anywhere. There have been many suitcase sized portable test stands assembled for demonstration of hybrids. They show the safety of hybrid rockets to the audiences. These small show motors and small laboratory scale motors can give comparative burn rate data for development of different fuel/oxidizer combinations, however questions that are always asked when hybrids are mentioned for large scale applications are - how do they scale and has it been shown in a large motor? To answer those questions, large scale motor testing is required to verify the hybrid motor at its true size. The necessity to conduct large-scale hybrid rocket motor tests to validate the burn rate from the small motors to application size has been documented in several place^'^^.^. Comparison of small scale hybrid data to that of larger scale data indicates that the fuel burn rate goes down with increasing port size, even with the same oxidizer flux. This trend holds for conventional hybrid motors with forward oxidizer injection and HTPB based fuels. While the reason this is occurring would make a great paper or study or thesis, it is not thoroughly understood at this time. Potential causes include the fact that since hybrid combustion is boundary layer driven, the larger port sizes reduce the interaction (radiation, mixing and heat transfer) from the core region of the port. This chapter focuses on some of the large, prototype sized testing of hybrid motors. The largest motors tested have been AMROC s 250K-lbf thrust motor at Edwards Air Force Base and the Hybrid Propulsion Demonstration Program s 250K-lbf thrust motor at Stennis Space Center. Numerous smaller tests were performed to support the burn rate, stability and scaling concepts that went into the development of those large motors.

Story, George↗

NASA NTRS2012

P69 Using the NASA-Unified WRF to Assess the Impacts of Real-Time Vegetation on Simulations of Severe Weather

Since June 2010, the NASA Short-term Prediction Research and Transition (SPoRT; Goodman et al. 2004; Darden et al. 2010; Stano et al. 2012; Fuell et al. 2012) Center has been generating a real-time Normalized Difference Vegetation Index (NDVI) and corresponding Green Vegetation Fraction (GVF) composite based on reflectances from NASA s Moderate Resolution Imaging Spectroradiometer (MODIS) instrument. This dataset is generated at 0.01 resolution across the Continental United States (CONUS), and updated daily. The goal of producing such a vegetation dataset is to improve over the default climatological GVF dataset in land surface and numerical weather prediction models, in order to have better simulations of heat and moisture exchange between the land surface and the planetary boundary layer. Details on the SPoRT/MODIS vegetation composite algorithm are presented in Case et al. (2011). Vegetation indices such as GVF and Leaf Area Index (LAI) are used by land surface models (LSMs) to represent the horizontal and vertical density of plant vegetation (Gutman and Ignatov 1998), in order to calculate transpiration, interception and radiative shading. Both of these indices are related to the NDVI; however, there is an inherent ambiguity in determining GVF and LAI simultaneously from NDVI, as described in Gutman and Ignatov (1998). One practice is to specify the LAI while allowing the GVF to vary both spatially and temporally, as is done in the Noah LSM (Chen and Dudhia 2001; Ek et al. 2003). Operational versions of Noah within several of the National Centers for Environmental Prediction (NCEP) global and regional modeling systems hold the LAI fixed, while the GVF varies according to a global monthly climatology. This GVF climatology was derived from NDVI data on the NOAA Advanced Very High Resolution Radiometer (AVHRR) polar orbiting satellite, using information from 1985 to 1991 (Gutman and Ignatov 1998; Jiang et al. 2010). Representing data at the mid-point of every month, the climatological dataset is on a grid with 0.144 (~16 km) spatial resolution and is distributed with the community WRF model (Ek et al. 2003; Jiang et al. 2010; Skamarock et al. 2008).

Case, Jonathan L.↗

NASA NTRS2021

Online Photometric Calibration of Automatic Gain Thermal Infrared Cameras

Thermal infrared cameras are increasingly being used in various applications such as robot vision, industrial inspection and medical imaging, thanks to their improved resolution and portability. However, the performance of traditional computer vision techniques developed for electro-optical imagery does not directly translate to the thermal domain due to two major reasons: these algorithms require photometric assumptions to hold, and methods for photometric calibration of RGB cameras cannot be applied to thermal-infrared cameras due to difference in data acquisition and sensor phenomenology. In this paper, we take a step in this direction, and introduce a novel algorithm for online photometric calibration of thermalinfrared cameras. Our proposed method does not require any specific driver/hardware support and hence can be applied to any commercial off-the-shelf thermal IR camera. We present this in the context of visual odometry and SLAM algorithms, and demonstrate the efficacy of our proposed system through extensive experiments for both standard benchmark datasets, and real-world field tests with a thermal-infrared camera in natural outdoor environments.

Daftry, Shreyansh↗

NASA NTRS2012

Martian and Asteroid Dusts as Toxicological Risks for Human Exploration Missions

As the lunar dust toxicity project winds down, our attention is drawn to the potential toxicity of dust present at the surface of more distant celestial objects. Lunar dust has proven to be surprisingly toxic to the respiratory systems of test animals, so one might expect dust from other celestial bodies to hold toxicological surprises for us. At this point all one can do is consider what should be known about these dusts to characterize their toxicity, and then ask to what extent that information is known. In an ideal world it might be possible to suggest an exposure standard based on the known properties of a celestial dust without direct testing of the dust in laboratory animals. Factors known to affect the toxicity of mineral dusts under some conditions include the following: particle size distribution, particle shape/porosity, mineralogical properties (crystalline vs. amorphous), chemical properties and composition, and surface reactivity. Data from a recent Japanese mission to the S-type asteroid Itokawa revealed some surprises about the dust found there, given that there is only a very week gravitational field to hold the dust on the surface. On Mars the reddish-brown dust is widely distributed by global dust storms and by local clusters of dust devils. Past surface probes have revealed some of the properties of dust found there. Contemporary data from Curiosity and other surface probes will be weighed against the data needed to set a defensible safe exposure limit. Gaps will emerge.

James, John T.↗

NASA NTRS1992

Spacelab Life Sciences 1, development towards successive life sciences flights

A general review is presented of flight data and related hardware developments for Spacelab Life Sciences (SLS) 1 with an eye toward applying this knowledge to projected flight planning. Specific attention is given to the Research Animal Holding Facility (RAHF), the General Purpose Work Station (GPWS), the Small Mass Measuring Instrument (SMMI), and the Animal Enclosure Module (AEM). Preflight and in-flight testing methods are detailed including biocompatibility tests, parametric engineering sensitivity analyses, measurements of environmental parameters, and studies of operational interfaces. Particulate containment is demonstrated for some of the equipment, and successful use of the GPWS, RAHF, AEM, and SMMI are reported. The in-flight data are useful for developing more advanced hardware such as the AEM for SLS flight 2 and the modified RAHF for SLS flight 3.

Dalton, B. P.↗

NASA NTRSDate not supplied

The Development and Deployment of Machine Learning Models for Aircraft Engine Concept Assessment

In today's competitive landscape, the effective development and utilization of machine-learning (ML) applications have become imperative across various sectors. This study presents an outline of the procedure involved in creating and implementing ML models for conceptualizing and evaluating aircraft engines. These models leverage supervised deep-learning algorithms to analyze patterns within an open-source repository containing data on both production and research conventional turbofan engines. The main areas of focus encompass crucial engine parameters like thrust-specific fuel consumption (TSFC), engine weight, engine diameter, and turbomachinery stage counts. While the creation of ML models is fundamental for their utilization, ensuring their seamless deployment holds equal significance. To address this aspect, a conversational AI chatbot is constructed, utilizing natural language processing (NLP) techniques, to facilitate the deployment of these ML models. The comprehensive workflow encompasses several key stages: gathering and enhancing engine data, training and cross validating the ML models, testing and evaluating their performance, and finally, deploying, monitoring, and updating the ML models. By following this systematic approach, the aim is to streamline the development and deployment process of ML models tailored for aircraft engine assessment.

Development↗

NASA NTRSDate not supplied

The Development and Deployment of Machine Learning Models for Aircraft Engine Concept Assessment

In today's competitive landscape, the effective development and utilization of machine-learning (ML) applications have become imperative across various sectors. This study presents an outline of the procedure involved in creating and implementing ML models for conceptualizing and evaluating aircraft engines. These models leverage supervised deep-learning algorithms to analyze patterns within an open-source repository containing data on both production and research conventional turbofan engines. The main areas of focus encompass crucial engine parameters like thrust-specific fuel consumption (TSFC), engine weight, engine diameter, and turbomachinery stage counts. While the creation of ML models is fundamental for their utilization, ensuring their seamless deployment holds equal significance. To address this aspect, a conversational AI chatbot is constructed, utilizing natural language processing (NLP) techniques, to facilitate the deployment of these ML models. The comprehensive workflow encompasses several key stages: gathering and enhancing engine data, training and cross validating the ML models, testing and evaluating their performance, and finally, deploying, monitoring, and updating the ML models. By following this systematic approach, the aim is to streamline the development and deployment process of ML models tailored for aircraft engine assessment.

Development↗

NASA NTRS1974

Utility of ERTS for monitoring the breeding habit of migratory waterfowl

Waterfowl breeding-ground surveys conducted each year by the Bureau of Sport Fisheries and Wildlife extend over a vast region of the United States and Canada. Data from these surveys are used to estimate waterfowl production by means of a mathematical model. Counts of May and July ponds are some the variables used in this model. Annual production estimates are used to predict fall flights of ducks. This information is then used for establishing waterfowl hunting regulations. Work to date indicates that satellite remote sensing techniques hold considerable promise for the accurate and rapid assessment of waterfowl breeding habitat, especially changes in pond numbers and distribution. Development of an operational system utilizing satellite sensors as a primary source of data appears to be a realistic goal for the future.

Work, E. W., Jr.↗

NASA NTRS1991

Modification of a Successive Corrections Objective Analysis for Improved Derivative Calculations

The use of objectively analyzed fields of meteorological data for complex diagnostic studies and for the initialization of numerical prediction models places the requirements upon the objective method that derivatives of the gridded fields be accurate and free from interpolation error. A modification of an objective analysis developed by Barnes provides improvements in analyses of both the field and its derivatives. Theoretical comparisons, comparisons between analyses of analytical monochromatic waves, and comparisons between analyses of actual weather data are used to show the potential of the new method. The new method restores more of the amplitudes of desired wavelengths while simultaneously filtering more of the amplitudes of undesired wavelengths. These results also hold for the first and second derivatives calculated from the gridded fields. Greatest improvements were for the Laplacian of the height field; the new method reduced the variance of undesirable very short wavelengths by 72 pct. Other improvements were found in the divergence of the gridded wind field and near the boundaries of the field data.

Achtemeier, Gary L.↗

NASA NTRS1988

Modification of a successive corrections objective analysis for improved higher order calculations

The use of objectively analyzed fields of meteorological data for the initialization of numerical prediction models and for complex diagnostic studies places the requirements upon the objective method that derivatives of the gridded fields be accurate and free from interpolation error. A modification was proposed for an objective analysis developed by Barnes that provides improvements in analysis of both the field and its derivatives. Theoretical comparisons, comparisons between analyses of analytical monochromatic waves, and comparisons between analyses of actual weather data are used to show the potential of the new method. The new method restores more of the amplitudes of desired wavelengths while simultaneously filtering more of the amplitudes of undesired wavelengths. These results also hold for the first and second derivatives calculated from the gridded fields. Greatest improvements were for the Laplacian of the height field; the new method reduced the variance of undesirable very short wavelengths by 72 percent. Other improvements were found in the divergence of the gridded wind field and near the boundaries of the field of data.

Achtemeier, Gary L.↗

NASA NTRS1989

Modification of a successive corrections objective analysis for improved higher order calculations

The use of objectively analyzed fields of meteorological data for the initialization of numerical prediction models and for complex diagnostic studies places the requirements upon the objective method that derivatives of the gridded fields be accurate and free from interpolation error. A modification was proposed for an objective analysis developed by Barnes that provides improvements in analysis of both the field and its derivatives. Theoretical comparisons, comparisons between analyses of analytical monochromatic waves, and comparisons between analyses of actual weather data are used to show the potential of the new method. The new method restores more of the amplitudes of desired wavelengths while simultaneously filtering more of the amplitudes of undesired wavelengths. These results also hold for the first and second derivatives calculated from the gridded fields. Greatest improvements were for the Laplacian of the height field; the new method reduced the variance of undesirable very short wavelengths by 72 percent. Other improvements were found in the divergence of the gridded wind field and near the boundaries of the field of data.

Achtemeier, Gary L.↗

NASA NTRS1981

Sample data effects of high-pass filters

Four mathematical models of linear first and second order high pass washout filters were analyzed. These models were Euler's Integration, Zero-Order Hold, Bilinear Transformation, and Second-Order Adams-Bashforth Integration. Bode responses for each model at various sample rates were compared to the continuous filter response. Higher sample rates produced Bode responses approaching the continuous response and the Bilinear Transformation model produced the best responses over the frequency spectrum and sample rates. Pole location analysis of each model in the z-plane showed the Bilinear Transformation and Zero-Order Hold models gave stable poles regardless of time step size, whereas the other models did not display stable poles. A near constant gain error over the entire frequency spectrum was discovered in the Zero-Order Hold cases and a correction gain was calculated for the first-order high-pass filter case.

Chin, D. O.↗

NASA NTRS1971

Design and analysis of an automatic method of measuring silicon-controlled-rectifier holding current

The design of an automated SCR holding-current measurement system is described. The circuits used in the measurement system were designed to meet the major requirements of automatic data acquisition, reliability, and repeatability. Performance data are presented and compared with calibration data. The data verified the accuracy of the measurement system. Data taken over a 48-hr period showed that the measurement system operated satisfactorily and met all the design requirements.

Maslowski, E. A.↗

NASA NTRS1977

Initial development of a method of significant waveheight estimation for GEOS-III

The numerical method by which ocean surface significant waveheight estimates are produced from the GEOS-3 radar altimeter data is described. Four parameters characterizing the expected radar mean return waveform are determined from the altimeter's sixteen sample-and-hold waveform samplers through use of an iterative, least squares approach. One of the four parameters is a risetime term which has contributions from both the transmitted radar pulse width and the rms ocean surface height; the estimated significant waveheight is extracted from this risetime. The noise character of the estimation process leads to occasional negative significant waveheight estimates, and the origin of these nonphysical negative results is discussed. Possible modifications and areas for additional investigation are indicated.

Hayne, G. S.↗

NASA NTRS1981

Gulf of Mexico satellite radar altimetry

The dynamic topography of the sea surface was measured. The radar altimeter measurements yield average ocean topographic data which are mapped. Seasonal deviations from a 3 year mean topography are presented. The altimeters are also instrumented with sample and hold gates which provide information about the shape and amplitude of the return waveform. Parameters including ocean surface wind speed and the significant wave height are determined. One hundred eighty six wind speed and significant wave height histograms are presented.

Parra, C. G.↗