Search NASA⌕ Search

SEARCH · Search NASA

Results for “salt behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Methods for predicting properties and tailoring salt solutions for industrial processes

An algorithm developed at Oak Ridge National Laboratory accurately and quickly predicts thermodynamic properties of concentrated aqueous salt solutions. This algorithm is much simpler and much faster than other modeling schemes and is unique because it can predict solution behavior at very high concentrations and under varying conditions. Typical industrial applications of this algorithm would be in manufacture of inorganic chemicals by crystallization, thermal storage, refrigeration and cooling, extraction of metals, emissions controls, etc.

Ally, Moonis R.↗
NASA NTRS2001

Osmoregulation in marine mammals

Osmoregulation in marine mammals has been investigated for over a century; however, a review of recent advances in our understanding of water and electrolyte balance and of renal function in marine mammals is warranted. The following topics are discussed: (i) kidney structure and urine concentrating ability, (ii) sources of water, (iii) the effects of feeding, fasting and diving, (iv) the renal responses to infusions of varying salinity and (v) hormonal regulation. The kidneys of pinnipeds and cetaceans are reniculate in structure, unlike those of terrestrial mammals (except bears), but this difference does not confer any greater concentrating ability. Pinnipeds, cetaceans, manatees and sea otters can concentrate their urine above the concentration of sea water, but only pinnipeds and otters have been shown to produce urine concentrations of Na+ and Cl- that are similar to those in sea water. This could afford them the capacity to drink sea water and not lose fresh water. However, with few exceptions, drinking is not a common behavior in pinnipeds and cetaceans. Water balance is maintained in these animals via metabolic and dietary water, while incidental ingestion and dietary salt may help maintain electrolyte homeostasis. Unlike most other aquatic mammals, sea otters commonly drink sea water and manatees frequently drink fresh water. Among the various taxonomic groups of marine mammals, the sensitivity of the renin-angiotensin-aldosterone system appears to be influenced by the availability of Na+. The antidiuretic role of vasopressin remains inconclusive in marine mammals, while the natriuretic function of atrial natriuretic peptide has yet to be examined. Ideas on the direction of future studies are presented.

Non-NASA Center↗
DOE OSTI2022

Defect-Regulated Frustrated-Lewis-Pair Behavior of Boron Nitride in Ambient Pressure Hydrogen Activation

We report the construction of heterogeneous frustrated Lewis pairs (FLPs) with performance comparable to or surpassing the homogeneous counterparts in H 2 activation is a long-standing challenge. Herein, sterically hindered Lewis acid (“B” center) and Lewis base (“N” center) sites were anchored within the rigid lattice of highly crystalline hexagonal boron nitride (h-BN) scaffolds. The active sites were created via precision defect regulation during the molten-salt-involved (NaNH 2 and NaBH 4 ) h-BN construction procedure. The as-afforded h-BN scaffolds achieved highly efficient H 2 /D 2 activation and dissociation under ambient pressure via FLP-like behavior, and attractive catalytic efficiency in hydrogenation reactions surpassing the current heterogeneous analogues.

36 MATERIALS SCIENCE↗
NASA NTRS2002

Behavior of Rapidly Sheared Bubble Suspensions

An experiment to be carried out aboard the International Space Station is described. A suspension consisting of millimeter-sized bubbles in water containing some dissolved salt, which prevents bubbles from coalescing, will be sheared in a Couette cylindrical cell. Rotation of the outer cylinder will produce centrifugal force which will tend to accumulate the bubbles near the inner wall. The shearing will enhance collisions among bubbles creating thereby bubble phase pressure that will resist the tendency of the bubbles to accumulate near the inner wall. The bubble volume fraction and velocity profiles will be measured and compared with the theoretical predictions. Ground-based research on measurement of bubble phase properties and flow in vertical channel are described.

Sangani, A. S.↗
DOE OSTI2025

Material properties of aqueous potassium acetate solutions for use in liquid desiccant air conditioning

We present thermophysical properties of aqueous potassium acetate solutions relevant to their application as a liquid desiccant in air-conditioning systems. Liquid desiccant air conditioners could provide up to 80% energy savings compared to high-efficiency vapor compression air conditioners. However, the commonly used liquid desiccants, particularly chloride salt solutions, are highly corrosive. This precludes the use of metallic components, necessitating specialized plastics and thereby driving up cost, weight, and limiting operational temperature and pressure ranges. Potassium acetate has been identified as a less corrosive alternative, potentially enabling broader material compatibility in LDAC components. In this study we systematically measured and modelled key thermophysical properties of KAc solutions density, vapor pressure, viscosity, specific heat capacity, phase behavior, and diffusion coefficient across a range of concentrations (10 - 70wt%) and temperatures. For instance, KAc exhibits a vapor pressure of 3.1 kPa at 50wt% and 40degrees C, demonstrating dehumidification capability comparable to chloride salts. By providing an extended dataset and associated models, this work advances the understanding needed to design energy-efficient, corrosion mitigating LDAC system.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Epitaxial TiO x Surface in Ferroelectric BaTiO 3 : Native Structure and Dynamic Patterning at the Atomic Scale

Surfaces and interfaces of ferroelectric oxides exhibit enhanced functionality, and therefore serve as a platform for novel nano and quantum technologies. Experimental and theoretical challenges associated with examining the subtle electro-chemo-mechanical balance at metal-oxide surfaces have hindered the understanding and control of their structure and behavior. Here, we combine advanced electron-microscopy and first-principles thermodynamics methods to reveal the atomic-scale chemical and crystallographic structure of the surface of the seminal ferroelectric BaTiO 3 . Here, we show that the surface is composed of a native < 2-nm thick TiOx rock-salt layer in epitaxial registry with the BaTiO 3 . Using electron-beam irradiation, we successfully patterned artificially TiO x sites with sub-nanometer resolution, by inducing Ba escape. Therefore, our work offers electro-chemo-mechanical insights into ferroelectric surface behavior in addition to a method for scalable high-resolution beam-induced chemical lithography for selectively driving surface phase transitions, and thereby functionalizing metal-oxide surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Coupled Thermal-Hydraulic Analysis and Species Mass Transport in a Versatile Experimental Salt Irradiation Loop (VESIL) using COBRA-TF

With the resurgence of interest in Molten Salt Reactor (MSR) technology among commercial and governmental agencies, there is a need for new experiments and new modelling capabilities to characterize the unique phenomena present in this fluid fuel system. A Versatile Experimental Salt Irradiation Loop (VESIL) is currently under investigation at Idaho National Laboratory. It is designed to be a dynamic fuel-bearing salt loop placed in the Advanced Test Reactor. One of the key phenomena this proposed experiment plans to elucidate is fission product speciation in the fuel-salt and the subsequent effects this can have on fuel-salt properties, fission product transport and interactions, source term generation, corrosion and redox potential control. Specifically, noble gases (Xe & Kr) will bubble out to a plenum or off-gas system and noble metals (Mo, Tc, Te etc.) will precipitate and deposit in specific zones in the loop. This work extends the mass transfer and species interaction models in the general species transport capability of COBRA-TF (CTF) and applies these models to give a preliminary estimation of fission product behavior in the proposed VESIL design.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Thermal Insulation for a High Temperature Molten Salt Storage Tank in a CSP Plant

A ternary molten chloride has been suggested as a high temperature (550-720 °C) sensible heat storage medium for a two-tank system. An effective thermal insulation is proposed to provide an opportunity for the fabrication of both the hot and cold storage tanks from lower cost metals, e.g. A240-347H, by maintaining the tank wall below 500 °C. To achieve this, the hot storage tank mainly comprises of inner shell (11.4 cm of a refractory brick as liner (KX-99®), 30 cm of insulation brick) and outer metal shell, where 5 cm of frozen layer of PCM800 (NaCl), and 5 cm of ceramic wool fill the annular space between the shells. Another layer of ceramic wool was introduced at the outer side of the metal shell to keep the temperature lower than 60 °C. ANSYS Fluent was used for the numerical study of the cool down behavior of the system during idle period when tank is quarter-filled. The heat transfer modes were considered as radiation and natural convection heat transfer from the hot molten salt at 720 °C, conduction through the solid layers and convection heat transfer from the outer shell to the environment at 15 °C. The results showed that the proposed insulation system including a frozen layer of PCM800 maintains the temperature at the metal wall lower than 500 °C, and lower than 60°C at the outer side of the tank. Apart from the insulation property of the frozen layer of PCM800, it absorbs any leak of hot molten salt, acting as a barrier between salt and the metal shell. The thermal performance analysis provide an insight into the benefits of the multilayer insulation.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2020

Thermal Insulation for a High Temperature Molten Salt Storage Tank in a CSP Plant: Preprint

A ternary molten chloride has been suggested as a high temperature (550-720 °C) sensible heat storage medium for a two-tank system. An effective thermal insulation is proposed to provide an opportunity for the fabrication of both the hot and cold storage tanks from lower cost metals, e.g. A240-347H, by maintaining the tank wall below 500 °C. To achieve this, the hot storage tank mainly comprises of inner shell (11.4 cm of a refractory brick as liner (KX-99 ®), 30 cm of insulation brick) and outer metal shell, where 5 cm of frozen layer of PCM800 (NaCl), and 5 cm of ceramic wool fill the annular space between the shells. Another layer of ceramic wool was introduced at the outer side of the metal shell to keep the temperature lower than 60 °C. ANSYS Fluent was used for the numerical study of the cool down behavior of the system during idle period when tank is quarter-filled. The heat transfer modes were considered as radiation and natural convection heat transfer from the hot molten salt at 720 °C, conduction through the solid layers and convection heat transfer from the outer shell to the environment at 15 °C. The results showed that the proposed insulation system including a frozen layer of PCM800 maintains the temperature at the metal wall lower than 500 °C, and lower than 60 °C at the outer side of the tank. Apart from the insulation property of the frozen layer of PCM800, it absorbs any leak of hot molten salt, acting as a barrier between salt and the metal shell. The thermal performance analysis provide an insight into the benefits of the multilayer insulation.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2026

Compatibility of Type 304H Stainless Steel in Static Molten FLiBe for Inertial Confinement Fusion Reactors: Role of Impurities and Redox Control

Molten fluoride salts, such as FLiBe (LiF-BeF2), are promising candidates for tritium breeding and heat transfer in fusion reactors, but corrosion of structural materials remains a major challenge. This study investigates the corrosion behavior of austenitic stainless steel 304H in purified and NiF2-containing FLiBe at 500°C and 600°C, focusing on the effects of impurities and redox control. Exposure to purified FLiBe resulted in the concurrent depletion of Cr, Mn, and Fe, with corrosion at 500 °C dominated by the combined oxide formation and elemental dissolution, while at 600°C elemental depletion was predominant. The addition of a controlled NiF2 impurity significantly accelerated corrosion at both temperatures, demonstrating the sensitivity of 304H to the salt redox state. Beryllium additions were effective in mitigating corrosion for both baseline and NiF2-containing FLiBe; minimal depletion of Cr, Mn, and Fe occurred with Be additions as low as 2.5 mg (147 wppm), and no NiBe intermetallics formed at 5 mg (294 wppm), indicating that small Be inventories can provide substantial protection without deleterious phase formation. Thermodynamic equilibrium and coupled thermodynamic-kinetic analyses at the salt-alloy interface suggested low corrosion rates in systems with limited hydrogen fluoride (HF) generation, highlighting the importance of salt redox control. Estimates for a Be addition rate were calculated for the HYLIFE-II fusion reactor that can mitigate corrosion-induced degradation, assuming complete conversion of tritium to tritium fluoride (TF). Overall, 304H shows reasonable compatibility with FLiBe under optimized redox conditions. These results provide quantitative guidance for material selection and salt management in fusion blanket and heat exchanger systems and motivate validation under flowing, nonisothermal, and irradiated conditions.

Pillai, Rishi [ORNL] (ORCID:0000000243688197)↗
DOE OSTI2023

Concentration‐dependent Cycling of Phenothiazine‐based Electrolytes in Nonaqueous Redox Flow Cells

Increasing redox-active species concentrations can improve viability for organic redox flow batteries by enabling higher energy densities, but the required concentrated solutions can become viscous and less conductive, leading to inefficient electrochemical cycling and low material utilization at higher current densities. To better understand these tradeoffs in a model system, we study a highly soluble and stable redox-active couple, N-(2-(2-methoxyethoxy)ethyl)phenothiazine (MEEPT), and its bis(trifluoromethanesulfonyl)imide radical cation salt (MEEPT-TFSI). We measure the physicochemical properties of electrolytes containing 0.2–1 M active species and connect these to symmetric cell cycling behavior, achieving robust cycling performance. Specifically, for a 1 M electrolyte concentration, we demonstrate 94% materials utilization, 89% capacity retention, and 99.8% average coulombic efficiency over 435 h (100 full cycles). This demonstration helps to establish potential for high-performing, concentrated nonaqueous electrolytes and highlights possible failure modes in such systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Volatility of sodium, potassium, and cesium perrhenates determined by thermogravimetry

Here, in this study, we investigated the volatility of sodium, potassium, and cesium perrhenates using thermogravimetry (TG) performed on single salts and their binary mixed salts. We performed simultaneous TG and differential scanning calorimetry under a ramp heating condition at 10°C/min up to 1200°C to characterize volatilization behavior as a function of temperature. We also performed isothermal TG over a temperature range of 700 to 975°C to estimate the vapor pressures of the alkali perrhenates based on a modified Langmuir equation that relates the rate of free evaporation from the open surface to vapor pressure. In this paper, we discuss the results of our study on the temperature of evaporation and temperature-dependent vapor pressure of sodium, potassium, and cesium perrhenates in relation to rhenium volatilization behavior observed during melting of simulated waste glass.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Field-Dependent Ionic Conductivities from Generalized Fluctuation-Dissipation Relations

We derive a relationship for the electric field dependent ionic conductivity in terms of fluctuations of time integrated microscopic variables. We demonstrate this formalism with molecular dynamics simulations of solutions of differing ionic strength with implicit solvent conditions and molten salts. These calculations are aided by a novel nonequilibrium statistical reweighting scheme that allows for the conductivity to be computed as a continuous function of the applied field. In strong electrolytes, we find the fluctuations of the ionic current are Gaussian, and subsequently, the conductivity is constant with applied field. In weaker electrolytes and molten salts, we find the fluctuations of the ionic current are strongly non-Gaussian, and the conductivity increases with applied field. Furthermore, this nonlinear behavior, known phenomenologically for dilute electrolytes as the Onsager-Wien effect, is general and results from the suppression of ionic correlations at large applied fields, as we elucidate through both dynamic and static correlations within nonequilibrium steady states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

(NH 4 ) 2 [UO 2 Cl 4 ]·2H 2 O, a new uranyl tetrachloride with ammonium charge-balancing cations

A new uranyl tetrachloride salt with chemical formula, (NH 4 ) 2 [UO 2 Cl 4 ]·2H 2 O, namely, diammonium uranyl tetrachloride dihydrate, 1 , was prepared and crystallized via slow evaporation from a solution of 2 M hydrochloric acid. As confirmed by powder X-ray diffraction, the title compound crystallizes with an ammonium chloride impurity that formed as a result of the breakdown of a triazine precursor. The (UO 2 Cl 4 ) 2− dianion is charge balanced by ammonium cations, while an extensive hydrogen-bond network donated from structural water molecules stabilize the overall assembly. Compound 1 adds to the extensive collection of actinyl tetrachloride salts, but it represents the first without an alkali cation for purely inorganic compounds. Diffuse reflectance and luminescence spectra show typical absorption and emission behavior, respectively, of uranyl materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Corrosion Behavior of Developmental Iron Phosphate Waste Forms: FY20 Status Report

Corrosion tests were performed to assess the dissolution behaviors of developmental iron phosphate materials that are being evaluated as an alternative to the glass-bonded sodalite ceramic waste form to immobilize salt wastes from electrochemical separation operations. Production of the iron phosphate waste form results in dehalogenation of the waste salt that increases potential waste loading. Ferric oxide is added to the waste form to increase the chemical durability. Tests conducted to optimize the amount of ferric oxide used to make the waste form are summarized in this report. Specimens prepared from materials made with between 17 and 34 mole % ferric oxide were subjected to two test methods to assess the effects of the iron content on the relative durability and retention of immobilized salt cations including cesium, strontium, and neodymium. Modified ASTM C1308 test results show the intrinsic durability was significantly higher for materials made with 27 mol % ferric oxide. Further additions generated iron-rich inclusion phases and did not improve durability. Modified ASTM C1285 test results show that solution feedback attenuates the dissolution rate similar to what is observed for borosilicate glasses within seven days. Analyses of test specimens after 42 days show no evidence that surface layers formed. Combined with previous studies addressing the salt loading, a composition region of the ammonium (di)hydrogen phosphate-waste salt-ferric oxide ternary has been defined for durable waste form compositions. Materials with that composition can be used to determine optimal processing conditions, assess long-term performance, and parameterize a degradation model.

Stariha, S. A.↗
DOE OSTI2023

Smart Droplets Stabilized by Designer Surfactants: From Biomimicry to Active Motion to Materials Healing

The science and technologies of emulsion droplets have been a long‐term focus of extensive research endeavors for their practical utility across a breadth of industries, including pharmaceutical products, oil recovery processes, and the food sciences. However, with advances in materials chemistry and characterization tools, new emerging areas are arising with a focus on “smart droplets”. The versatility of emulsion droplets across is based on their ability to partition and create isolated systems with properties defined by the liquid–liquid interface, while preparative routes allow manipulation of droplet size, stability, and encapsulated contents. As described in this article, significant efforts are being devoted to creating new types of droplets by “activating” this interface through the incorporation of reactive structures that trigger droplet response to applied or environmental stimuli (e.g., pH, temperature, salt, or external fields). Moreover, parallels between droplets and live cells inspire efforts to conceive systems that resemble biological motifs or that can produce cellular behaviors that imitate biology (e.g., swarming, communication, or motion). Here, the authors highlight recent advances in smart droplets, with emphasis on organic, polymer, and/or particle surfactants that give rise to inter‐droplet communication (via aggregation, fusion, division, or mass transfer), droplet vehicles for controlled delivery, autonomous droplet motion, and tunable emulsion inversion. Especially emphasized is the macromolecular design to produce reactive and functional surfactants, which are crucial to responsive droplet behavior and their underlying mechanisms. More generally, the exquisite interplay between materials science and biology inspires the review of this research area that provides unique opportunities for insight and inspiration into the capabilities of new droplet designs.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Frustrated Coulombic and Cation Size Effects on Nanoscale Boehmite Aggregation: A Tumbler Small- and Ultra-Small-Angle Neutron Scattering Study

To better understand the effects of solution chemistry on particle aggregation in the complex legacy tank wastes at the Hanford (WA) and Savannah River (SC) sites, we have performed a series of tumbler small- and ultra-small-angle neutron scattering experiments on 20 wt % solid slurries of nanoparticulate aluminum oxyhydroxide (boehmite) with M 1+ nitrates of various concentrations and radii. In this study, the solutes consisted of H, Li, Na, K, and Rb nitrates at 10 –5 , 10 –3 , 10 –1 , 2, and 4 molal (m) concentrations, as well as in pure H 2 O. Synthetic boehmite nanoparticles were used with a size range from ~20 to 30 nm. Tumbler cells were used to keep the solids from settling. Although particles initially form individual rhombohedral platelets, once placed in solution, they quickly form well-bonded stacks, primary aggregates, up to ~1500 Å long, and a second level of aggregates whose concentration and structure vary as a function of cation type and concentration. Aggregation generally increases with increased solute concentration and with cation radius up to a concentration somewhat above 10 –1 m, at which point the trend reverses. Primary aggregates become more rodlike and larger. The Kirkwood-like reversal probably reflects a change from Derjaguin–Landau–Verwey–Overbeek (DLVO)/Debye behavior controlled by surface chemistry to a frustrated Coulombic system controlled by the solution structure. These data suggest that an understanding of the effects of salt concentration and chemistry on nanoparticle aggregate structures provides useful physical insights into the microscopic origin of slurry rheology in the Hanford and Savannah River legacy wastes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗