Search NASA⌕ Search

SEARCH · Search NASA

Results for “Contact prediction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Identification of Small-Molecule Inhibitors of Fibroblast Growth Factor 23 Signaling via In Silico Hot Spot Prediction and Molecular Docking to α-Klotho

Fibroblast growth factor 23 (FGF23) is a therapeutic target for treating hereditary and acquired hypophosphatemic disorders, such as X-linked hypophosphatemic (XLH) rickets and tumor-induced osteomalacia (TIO), respectively. FGF23-induced hypophosphatemia is mediated by signaling through a ternary complex formed by FGF23, the FGF receptor (FGFR), and α-Klotho. Currently, disorders of excess FGF23 are treated with an FGF23-blocking antibody, burosumab. Small-molecule drugs that disrupt protein/protein interactions necessary for the ternary complex formation offer an alternative to disrupting FGF23 signaling. In this study, the FGF23:α-Klotho interface was targeted to identify small-molecule protein/protein interaction inhibitors since it was computationally predicted to have a large fraction of hot spots and two druggable residues on α-Klotho. We further identified Tyr433 on the KL1 domain of α-Klotho as a promising hot spot and α-Klotho as an appropriate drug-binding target at this interface. Subsequently, we performed in silico docking of ~5.5 million compounds from the ZINC database to the interface region of α-Klotho from the ternary crystal structure. Following docking, 24 and 20 compounds were in the final list based on the lowest binding free energies to α-Klotho and the largest number of contacts with Tyr433, respectively. Herein, five compounds were assessed experimentally by their FGF23-mediated extracellular signal-regulated kinase (ERK) activities in vitro, and two of these reduced activities significantly. Both these compounds were predicted to have favorable binding affinities to α-Klotho but not have a large number of contacts with the hot spot Tyr433. ZINC12409120 was found experimentally to disrupt FGF23:α-Klotho interaction to reduce FGF23-mediated ERK activities by 70% and have a half maximal inhibitory concentration (IC50) of 5.0 ± 0.23 μM. Molecular dynamics (MD) simulations of the ZINC12409120:α-Klotho complex starting from in silico docking poses reveal that the ligand exhibits contacts with residues on the KL1 domain, the KL1–KL2 linker, and the KL2 domain of α-Klotho simultaneously, thereby possibly disrupting the regular function of α-Klotho and impeding FGF23:α-Klotho interaction. ZINC12409120 is a candidate for lead optimization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2002

Transient Vibration Prediction for Rotors on Ball Bearings Using Load-dependent Non-linear Bearing Stiffness

Rolling-element bearing forces vary nonlinearly with bearing deflection. Thus an accurate rotordynamic transient analysis requires bearing forces to be determined at each step of the transient solution. Analyses have been carried out to show the effect of accurate bearing transient forces (accounting for non-linear speed and load dependent bearing stiffness) as compared to conventional use of average rolling-element bearing stiffness. Bearing forces were calculated by COBRA-AHS (Computer Optimized Ball and Roller Bearing Analysis - Advanced High Speed) and supplied to the rotordynamics code ARDS (Analysis of Rotor Dynamic Systems) for accurate simulation of rotor transient behavior. COBRA-AHS is a fast-running 5 degree-of-freedom computer code able to calculate high speed rolling-element bearing load-displacement data for radial and angular contact ball bearings and also for cylindrical and tapered roller beatings. Results show that use of nonlinear bearing characteristics is essential for accurate prediction of rotordynamic behavior.

Fleming, David P.↗
DOE OSTI2021

Theoretical Prediction and Interpretation of 237 Np Mössbauer Isomer Shifts

Different theoretical approaches for the calculation of 237 Np Mössbauer isomer shifts are investigated. The traditional contact density route is compared to a previously proposed alternative approach that uses energy derivatives with respect to the nuclear radius. Both approaches yield similar results as long as suitable basis sets augmented with large exponents and relativistic methods are used. Density functional theory (DFT) calculations do not show a strong dependency of the 237 Np isomer shift on the chosen functional. Wavefunction calculations show that dynamic electron correlation can be important when covalent bonding influences the isomer shift. Effects from spin–orbit coupling are small. The isomer shifts of ionic solids and Np(III) organometallic complexes are largely governed by the oxidation state of Np. Isomer shifts of organometallic Np(IV) complexes are strongly affected by donation bonding. Furthermore, detailed analysis of the wavefunction results with different active spaces demonstrates that correlation among the outer core Np and occupied ligand frontier orbitals contributes significantly to isomer shifts of Np(IV) compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Superhydrophobic composite asymmetric electrospun membrane for sustainable vacuum assisted air gap membrane distillation

Membrane distillation (MD) relies on superhydrophobic membranes that must achieve the competing goals of high liquid entry pressure (LEP) and high permeability. Here, in this study, we developed the first superhydrophobic composite electrospun asymmetric membrane using fluorinated graphite (FG). We also provided among the first comparisons of the relative benefits of membrane asymmetry and composite coatings via 3D electrospinning and spraying. FG particles increased the roughness and reduced the zeta potential of the membranes. Superhydrophobic composite membranes had a contact angle of 157° (sliding angle of 7°) and an LEP of 327 kPa. Long-term MD testing revealed that FG particles could increase MD's sustainability while decreasing membrane wetting. Vacuum-assisted air gap membrane distillation (V-AGMD) showed that the composite asymmetric membrane outperformed the non-asymmetric version (composite nanofiber) membrane by 21 % in average water flux and 25 % in average thermal efficiency because of the asymmetric structure of the membrane. The numerical model developed for the V-AGMD system also successfully predicted the water flux generated experimentally from the composite nanofiber and composite asymmetric membranes. Our results confirmed that electrospun asymmetric FG membranes with high contact angle, low sliding angle, high permeability, and high gained output ratio (GOR) would be promising candidates for sustainable MD.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Cholesterol-induced suppression of Kir2 channels is mediated by decoupling at the inter-subunit interfaces

Cholesterol is a major regulator of multiple types of ion channels. Although there is increasing information about cholesterol binding sites, the molecular mechanisms through which cholesterol binding alters channel function are virtually unknown. In this study, we used a combination of Martini coarse-grained simulations, a network theory-based analysis, and electrophysiology to determine the effect of cholesterol on the dynamic structure of the Kir2.2 channel. We found that increasing membrane cholesterol reduced the likelihood of contact between specific regions of the cytoplasmic and transmembrane domains of the channel, most prominently at the subunit-subunit interfaces of the cytosolic domains. This decrease in contact was mediated by pairwise interactions of specific residues and correlated to the stoichiometry of cholesterol binding events. The predictions of the model were tested by site-directed mutagenesis of two identified residues—V265 and H222—and high throughput electrophysiology.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Thermophysical Property Measurements on Salt Mixture

Thermal conductivity, specific heat, viscosity, and density are critical properties for understanding thermal hydraulics of heat transfer fluids (HTFs) like molten salts. These properties are important for design and safe operation of any HTF loop. These characterizations are required to benchmark computational chemical models that are used to predict properties, but existent data are limited. These measurements are extremely difficult to make due to the operating temperature range and corrosive properties of the salt.Density measurements are needed to predict volumetric behavior. Thermal expansion mismatches can cause mechanical failure of structural materials and important components that are in contact with the molten salt. All of these properties are related to heat transfer in HTFs. The heat generated in a reactor must be high enough to derive power; however it should not be so hot that it cannot be safely removed via the HTF at an appropriate rate. It is important to understand the thermal hydraulics required to operate at the desired power generation level and to avoid situations in which thermal shifts can damage components,cause failure of structural materials, and/or lead to accidents. Understanding these thermal properties can aid in component and process design and can contribute to optimized operational and safety parameters.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Step Catalysis to Synthesize Fossil-Free Ammonia at Atmospheric Pressure (Final Technical Report)

Affordable fossil-free ammonia synthesis will enable high-yield sustainable crop production for a growing world population while preserving the planet and making the best use of water and land. Simple technology amenable to intermittent operation using renewable energy will be made available through step catalysis activating dinitrogen at atmospheric pressure by nitride formation. Project objectives: (1) At the single particle level, quantify and analyze N2 activation by doped or alloyed manganese macroscopic- and nano particles at atmospheric pressure, (2) Quantify and analyze ammonia synthesis from doped or alloyed metal nitride particles when contacting them with hydrogen at atmospheric pressure, and (3) Integrate experimental data and atomic-level computational models to predict the behavior of metal alloys in nitrogen activation and subsequent ammonia synthesis.

10 SYNTHETIC FUELS↗
NASA NTRS1973

Traction in elastohydrodynamic line contacts for two synthesized hydrocarbon fluids

The paper describes the disk machine designed and constructed for the investigation of the traction in elastohydrodynamic line contacts for two synthesized hydrocarbon fluids. The results of this experimental study are presented and compared with the theoretical predictions of traction according to the thermal and non-Newtonian theory recently presented by the authors.

Trachman, E. G.↗
NASA NTRS1974

Thermal design of the IMP-I and H spacecraft

A description of the thermal subsystem of the IMP-I and H spacecraft is presented. These two spacecraft were of a larger and more advanced type in the Explorer series and were successfully launched in March 1971 and September 1972. The thermal requirements, analysis, and design of each spacecraft are described including several specific designs for individual experiments. Techniques for obtaining varying degrees of thermal isolation and contact are presented. The thermal control coatings including the spaceflight performance of silver-coated FEP Teflon are discussed. Predicted performance is compared to measured flight data. The good agreement between them verifies the validity of the thermal model and the selection of coatings.

Hoffman, R. H.↗
NASA NTRS1980

Surface temperatures and glassy state investigations in tribology

Measurements were made of the limiting shear stress for two naphthenic oils of differing molecular weight and three blends of the lower molecular weight oil and polymers of differing molecular weight. All reached the same limiting shear stress for the same temperature and pressure; although the polymer solutions reduced the limiting shear stress by about fifteen percent. A falling body viscometer was constructed to operate to 230 C and to 0.6 GPa and another was constructed to extend the pressure range to 1.1 GPa. A concentrated contact simulator was developed which allows recording of the traction force while the slide-roll ratio is continuously varied and the rolling speed is maintained essentially constant. Measurement of lubricant minimum film thickness of elliptical EHD contacts of various aspect ratios were made by optical interferometry. The experimental data were thirty percent greater than that predicted by the Hamrock and Dowson model. Preliminary development of the application of a scanning infrared radiation system to a tribological system was completed.

Bair, S.↗
NASA NTRS1993

Flex-Gears

Flex-Gears are being developed as an alternative to brushes and slip rings to conduct electricity across a rotating joint. Flex-Gears roll in the annulus of sun and ring gears for electrical contact while maintaining their position by using a novel application of involute gears. A single Flex-Gear is predicted to transfer up to 2.8 amps, thereby allowing a six inch diameter device, holding 30 Flex-Gears, to transfer over 80 amps. Semi-rigid Flex-Gears are proposed to decrease Flex-Gear stress and insure proper gear meshing.

Tsai, Lung-Wen↗
NASA NTRS1942

Prediction of Downwash and Dynamic Pressure at the Tail from Free-flight Measurements

The present measurements form a continuation of earlier flight tests published in a previous report for predicting the downwash at the tail of an airplane. The method makes use of the tail itself as integrating contact surface to the extent that, beginning from the measurement of the self-alignment of the elevator, the mean downwash angle and dynamic pressure at the tail are determined. The instrumental accuracy is considerably improved if the elevator is completely separate from the controls during the tests, because the effect of friction on the self-alignment of the elevator is then reduced to a minimum and a finer elevator weight balance is rendered possible. The structural design of the push-rod uncoupling mechanism is also described.

Eujen, E↗
NASA NTRS1997

Nonlinear Spectral Mixture Modeling of Lunar Multispectral: Implications for Lateral Transport

Linear and nonlinear spectral mixture models applied to Clementine multispectral images of the Moon result in roughly similar spatial distributions of endmember abundances. However, there are important differences in the absolute values of the predicted abundances. The magnitude of these differences and the implications for understanding geological processes are investigated across a geologic contact between mare and highland in the Grimaldi Basin on the western nearside of the Moon. Vertical and lateral mass transport due to impact cratering has redistributed mare and highland materials across the contact, creating a gradient in composition. Solutions to linear and nonlinear spectral mixture models for identical spectral endmembers of mare, highland, and fresh crater materials are compared across this simple geologic contact in the Grimaldi Basin. Profiles of mare abundance across the contact are extracted and compared quantitatively. Profiles from the linear mixture models indicate that the geologic contact has an average mare abundance of 60%, and the compositional boundary is asymmetric with more mare transported onto the highland side of the contact than highland onto the mare side of the contact. In contrast the nonlinear abundance profiles indicate that the geologic contact has an average mare abundance of 50%, and the compositional boundary is remarkably symmetric. Given the expectation that materials will be intimately mixed on the surface of the Moon, and that the asymmetries implied by the linear model are not consistent with our understanding of lunar surface processes, the nonlinear spectral mixture model is preferred and should be applied whenever quantitative abundance information is required. The remarkable symmetry in the compositional gradients across this contact indicate that lateral mass transport dominates over vertical transport at this boundary.

Mustard, John F.↗
NASA NTRS2013

Contact Graph Routing Enhancements Developed in ION for DTN

The Interplanetary Overlay Network (ION) software suite is an open-source, flight-ready implementation of networking protocols including the Delay/Disruption Tolerant Networking (DTN) Bundle Protocol (BP), the CCSDS (Consultative Committee for Space Data Systems) File Delivery Protocol (CFDP), and many others including the Contact Graph Routing (CGR) DTN routing system. While DTN offers the capability to tolerate disruption and long signal propagation delays in transmission, without an appropriate routing protocol, no data can be delivered. CGR was built for space exploration networks with scheduled communication opportunities (typically based on trajectories and orbits), represented as a contact graph. Since CGR uses knowledge of future connectivity, the contact graph can grow rather large, and so efficient processing is desired. These enhancements allow CGR to scale to predicted NASA space network complexities and beyond. This software improves upon CGR by adopting an earliest-arrival-time cost metric and using the Dijkstra path selection algorithm. Moving to Dijkstra path selection also enables construction of an earliest- arrival-time tree for multicast routing. The enhancements have been rolled into ION 3.0 available on sourceforge.net.

Segui, John S.↗
NASA NTRS1980

Thin n-i-p radiation-resistant solar cell feasibility study

Silicon solar cells were fabricated to verify the predictions that: (1) thin n(+)pp(+) cells can provide high values of open circuit voltage even when high resistivity base material ( 1000 omega-cm) is used; (2) cells with good p(+) back contacts will display an increase in open circuit voltage with decreasing cell thickness; and (3) high quality, thin, high resistivity, solar cells can be made using processing compatible with conventional practice. Analysis of I-V and spectral response measurements of these cells confirmed theoretical predictions and thereby pointed to voltages beyond the near 600 mV obtained in this study.

Allison, J. F.↗
NASA NTRS1987

An expert system for scheduling requests for communications links between TDRSS and ERBS

An ERBS-TDRSS Contact Planning System (ERBS-TDRSS CPS) is described which uses a graphics interface and the NASA Transportable Inference Engine. The procedure involves transfer of the ERBS-TDRSS Ground Track Orbit Prediction data to the ERBS flight operations area, where the ERBS-TDRSS CPS automatically generates requests for TDRSS service. As requested events are rejected, alternative context sensitive strategies are employed to generate new requested events until a schedule is completed. A report generator builds schedule requests for separate ERBS-TDRSS contacts.

Mclean, David R.↗
NASA NTRS1987

An expert system for scheduling requests for communications Links between TDRSS and ERBS

An ERBS-TDRSS Contact Planning System (ERBS-TDRSS CPS) is described which uses a graphics interface and the NASA Transportable Interference Engine. The procedure involves transfer of the ERBS-TDRSS Ground Track Orbit Prediction data to the ERBS flight operations area, where the ERBS-TDRSS CPS automatically generates requests for TDRSS service. As requested events are rejected, alternative context sensitive strategies are employed to generate new requested events until a schedule is completed. A report generator builds schedule requests for separate ERBS-TDRSS contacts.

Mclean, David R.↗
NASA NTRS1997

A. Palmgren Revisited: A Basis for Bearing Life Prediction

Bearing technology, as well as the bearing industry, began to develop with the invention of the bicycle in the 1850's. At the same time, high-quality steel was made possible by the Bessemer process. In 1881, H. Hertz published his contact stress analysis. By 1902, R. Stribeck had published his work based on Hertz theory to calculate the maximum load of a radially loaded ball bearing. By 1920, all of the rolling bearing types used today were being manufactured. AISI 52100 bearing steel became the material of choice for these bearings. Beginning in 1918, engineers directed their attention to predicting the lives of these bearings. In 1924, A. Palmgren published a paper outlining his approach to bearing life prediction. This paper was the basis for the Lundberg-Palmgren life theory published in 1947. A critical review of the 1924 Palmgren paper is presented here together with a discussion of its effect on bearing life prediction.

Zaretsky, Erwin V.↗