SEARCH · Search NASA

Results for “ELECTROMAGNETIC MEASUREMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

All sources NASA NTRS DOE OSTI

NASA NTRS1969

Line of sight microwave propagation

A review of the uses of microwave line-of-sight propagation in remote atmospheric probing is given. The review concentrates on use of the following types of measurements: (1) the use of total electrical path length for measuring average density and water vapor content; (2) the use of amplitude and phase fluctuations over a single path for determining the form of the turbulence spectrum; (3) the use of angle-of-arrival data for measuring the decrease in refractivity; and (4) the use of multiple-element receiving antennas in determining wind speed, atmospheric parameters, and atmospheric models. A review is given of the connection between microwave measurements and meteorological parameters, and the basic electromagnetic theory on which the analyses are made. A few suggestions for future work in these areas is given.

Strohbehn, J. W.↗

NASA NTRS1973

Surface electrical properties experiment

The surface electrical properties (SEP) experiment was used to explore the subsurface material of the Apollo 17 landing site by means of electromagnetic radiation. The experiment was designed to detect electrical layering, discrete scattering bodies, and the possible presence of water. From the analysis of the data, it was expected that values of the electrical properties (dielectric constant and loss tangent) of lunar material in situ would be obtained. The basic principle of the SEP experiment is interferometry. This principle involves only the interference of two or more waves to produce an interference pattern. The inversion of the interference pattern in terms of the spatial distribution of the electrical properties is the basic aim of the experiment (fig. 15-1). The experiment is most easily understood in terms of a single dipole antenna for radiating electromagnetic energy and a loop receiver for measuring the magnitudes of the fields.

Simmons, G.↗

NASA NTRS1975

Electrostatic and electromagnetic turbulence associated with the earth's bow shock

Simultaneous measurements were made of the electric and magnetic field spectral densities in the earth's bow shock by a plasma wave experiment on the Imp 6 spacecraft. The frequency range of the plasma wave detector was 20 Hz to 200 kHz. Electric fields were measured with high-sensitivity 100-m long dipole antennas and magnetic fields were measured with single-turn loop antennas. Two components are distinguished in the electric field spectrum in the bow shock: one component has a broad peak centered in the region 200-800 Hz, while the other component increases monotonically with decreasing frequency. The magnetic field spectrum has only one component that increases monotonically with decreasing frequency and has an upper cutoff frequency near the local electron gyrofrequency. This magnetic field turbulence is judged to be caused by whistler mode waves. The monotonic component of the electric field spectrum is thought to be the electric field spectrum of these whistler mode waves.

Rodriguez, P.↗

NASA NTRS1980

Lightning Technology: Proceedings of a Technical Symposium

Several facets of lightning technology are considered including phenomenology, measurement, detection, protection, interaction, and testing. Lightning electromagnetics, protection of ground systems, and simulated lightning testing are emphasized. The lightning-instrumented F-106 aircraft is described.

Source record↗

NASA NTRS1980

Electromagnetic sensors for general lightning application

Electromagnetic sensors for general lightning applications in measuring environment are discussed as well as system response to the environment. This includes electric and magnetic fields, surface current and charge densities, and currents on conductors. Many EMP sensors are directly applicable to lightning measurements, but there are some special cases of lightning measurements involving direct strikes which require special design considerations for the sensors. The sensors and instrumentation used by NMIMT in collecting data on lightning at South Baldy peak in central New Mexico during the 1978 and 1979 lightning seasons are also discussed. The Langmuir Laboratory facilities and details of the underground shielded instrumentation room and recording equipment are presented.

Baum, C. E.↗

NASA NTRS1983

Nonlinear control of an experimental beam by IMSC

Results are reported from an experiment designed to control the vibratory motion of a beam at NASA, Langley Research Center. The experimental setup consists of a free-free uniform beam acted upon by four electromagnetic force actuators, with the motion being measured by nine displacement sensors. The entire assembly is linked to a CDC Cyber 175 computer which permits on-line real-time computation of the control forces. The control scheme is based on Independent Modal-Space Control (IMSC), whereby the modal forces are computed using a nonlinear, on-off control law. The actuator forces are then synthesized using a linear transformation, resulting in quantized forces. The sensors data is processed by modal filters. It is observed that the controls designed on the basis of the IMSC method are very effective in suppressing the vibratory motion of the beam, even though there is about a 50 percent differene between the actual and the analytically computed frequencies.

Meirovitch, L.↗

NASA NTRS1982

Sferics in the stratosphere

Experimental and theoretical work on describing the propagation of sferics (electromagnetic waves) in the stratosphere is reviewed. Measurements are made with a double Langmuir probe that measures the potential difference between two identical, separated conductors, thereby permitting calculation of the electric field. The probe is usually mounted on a balloon floated up to the stratosphere. Data are presented that were taken over a thunderstorm and a theory of sferic propagation is developed, including defined relationships among the source, the propagation medium, and the detected signal. It is demonstrated that the signals recorded by the balloon instrumentation can be used to define the upper limit of the current density and total current in the stratosphere when a sferic is propagating.

Holzworth, R. H.↗

NASA NTRS1984

Observation of plasma deceleration at a rotational magnetopause discontinuity

This letter presents a detailed experimental analysis of the electric fields and electron flow velocities at a rotational magnetopause discontinuity. It is shown for this event that the magnetosheath plasma velocity is sharply decelerated on entry into the magnetosphere in very good agreement with a theoretical magnetohydrodynamic fit. This type of event is remarkable because the product of the electric-field vector and the Chapman-Ferraro magnetopause current is negative during the magnetopause crossing. This case represents one of two types of valid solution to the MHD boundary conditions. It differs from previously published examples of reconnective magnetopause geometries in that energy is being transferred locally from kinetic energy into electromagnetic energy at the time of these measurements.

Aggson, T. L.↗

NASA NTRS1987

Radar cross section studies

The ultimate goal is to generate experimental techniques and computer codes of rather general capability that would enable the aerospace industry to evaluate the scattering properties of aerodynamic shapes. Another goal involves developing an understanding of scattering mechanisms so that modification of the vehicular structure could be introduced within constraints set by aerodynamics. The development of indoor scattering measurement systems with special attention given to the compact range is another goal. There has been considerable progress in advancing state-of-the-art scattering measurements and control and analysis of the electromagnetic scattering from general targets.

Burnside, W. D.↗

NASA NTRS1991

Radio sky mapping from satellites at very low frequencies

Wave Distribution Function (WDF) analysis is a procedure for making sky maps of the sources of natural electromagnetic waves in space plasmas, given local measurements of some or all of the three magnetic and three electric field components. The work that still needs to be done on this subject includes solving basic methodological problems, translating the solution into efficient algorithms, and embodying the algorithms in computer software. One important scientific use of WDF analysis is to identify the mode of origin of plasmaspheric hiss. Some of the data from the Japanese satellite Akebono (EXOS D) are likely to be suitable for this purpose.

Storey, L. R. O.↗

NASA NTRS1991

6.7 radio sky mapping from satellites at very low frequencies

Storey, L. R. O.↗

NASA NTRS1994

Arcjet system integration development

Compatibility between an arcjet propulsion system and a communications satellite was verified by testing a Government-furnished, 1.4 kW hydrazine arcjet system with the FLTSATCOM qualification model satellite in a 9.1-meter (30-foot) diameter thermal-vacuum test chamber. Background pressure was maintained at 10(exp -5) torr during arcjet operation by cryopumping the thruster exhaust with an array of 5 K liquid helium cooled panels. Power for the arcjet system was obtained from the FLTSATCOM battery simulator. Spacecraft telemetry was monitored during each thruster firing period. No changes in telemetry data attributable to arcjet operation were detected in any of the tests. Electromagnetic compatibility data obtained included radiated emission measurements, conducted emission measurements, and cable coupling measurements. Significant noise was observed at lower frequencies. Above 500 MHz, radiated emissions were generally within limits, indicating that communication links at S-band and higher frequencies will not be affected. Other test data taken with a diagnostic array of calorimeters, radiometers, witness plates, and a residual gas analyzer evidenced compatible operation, and added to the data base for arcjet system integration. Two test series were conducted. The first series only included the arcjet and diagnostic array operating at approximately 0.1 torr background pressure. The second series added the qualification model spacecraft, a solar panel, and the helium cryopanels. Tests were conducted at 0.1 torr and 10(exp-5) torr. The arcjet thruster was canted 20 degrees relative to the solar panel axis, typical of the configuration used for stationkeeping thrusters on geosynchronous communications satellites.

Zafran, Sidney↗

NASA NTRS2000

Diffraction Grating Efficiency Calculations Based on Real Groove Profiles

The program we are attempting to bring about combines 3 difficult features, in order to demonstrate accuracy of efficiency predictions: (1) Accurate groove metrology methods on surface relief gratings; (2) Rigorous and usable electromagnetic efficiency calculation codes; (3) Accurate efficiency measurements in polarized light The benefit would be an increase in yield for high-performance gratings. Many such applications suffer long lead time or serious performance loss when new gratings are made which do not meet requirements or expectations.

Content, David↗

NASA NTRS2005

Geospatial Analysis and Remote Sensing from Airplanes and Satellites for Cultural Resources Management

Cultural resource management consists of research to identify, evaluate, document and assess cultural resources, planning to assist in decision-making, and stewardship to implement the preservation, protection and interpretation of these decisions and plans. One technique that may be useful in cultural resource management archaeology is remote sensing. It is the acquisition of data and derivative information about objects or materials (targets) located on the Earth's surface or in its atmosphere by using sensor mounted on platforms located at a distance from the targets to make measurements on interactions between the targets and electromagnetic radiation. Included in this definition are systems that acquire imagery by photographic methods and digital multispectral sensors. Data collected by digital multispectral sensors on aircraft and satellite platforms play a prominent role in many earth science applications, including land cover mapping, geology, soil science, agriculture, forestry, water resource management, urban and regional planning, and environmental assessments. Inherent in the analysis of remotely sensed data is the use of computer-based image processing techniques. Geographical information systems (GIS), designed for collecting, managing, and analyzing spatial information, are also useful in the analysis of remotely sensed data. A GIS can be used to integrate diverse types of spatially referenced digital data, including remotely sensed and map data. In archaeology, these tools have been used in various ways to aid in cultural resource projects. For example, they have been used to predict the presence of archaeological resources using modern environmental indicators. Remote sensing techniques have also been used to directly detect the presence of unknown sites based on the impact of past occupation on the Earth's surface. Additionally, remote sensing has been used as a mapping tool aimed at delineating the boundaries of a site or mapping previously unknown features. All of these applications are pertinent to the goals of site discovery and assessment in cultural resource management.

Giardino, Marco J.↗

NASA NTRS2007

System and Method for Determining Gas Optical Density Changes in a Non-Linear Measurement Regime

Each of two sensors, positioned to simultaneously detect electromagnetic radiation absorption along a path, is calibrated to define a unique response curve associated therewith that relates a change in voltage output for each sensor to a change in optical density. A ratio-of-responses curve is defined by a ratio of the response curve associated with the first sensor to the response curve associated with the second sensor. A ratio of sensor output changes is generated using outputs from the sensors. An operating point on the ratio-of-responses curve is established using the ratio of sensor output changes. The established operating point is indicative of an optical density. When the operating point is in the non-linear response region of at least one of the sensors, the operating point and optical density corresponding thereto can be used to establish an actual response of at least one of the sensors whereby the actual sensor output can be used in determining changes in the optical density.

Sachse, Glen W.↗

NASA NTRS1985

Analysis of Jovian low frequency radio emissions

The density of ions in the Io plasma torus and the scattering of these ions by low frequency electromagnetic emissions detected by Voyager 1 were studied. The ion density profile was investigated using whistler dispersion measurements provided by the Voyager plasma instrument. The scale height and absolute density of H+ ions in the vicinity of the plasma torus were determined by combining the measured plasma densities with the whistler dispersion measurements. A theoretical analysis of the modes of propagation of low frequency electromagnetic emissions in the torus was undertaken. Polarization reversal effects and rough estimates of the ion diffusion coefficient were utilized. Numerical evaluation of the ion diffusion coefficients in the torus were made using the observed Voyager 1 wave intensities. Results show that the observed wave intensities produce significant ion diffusion effects in the ion torus.

Gurnett, D. A.↗

NASA NTRS1989

Near-field testing of the 15-meter hoop-column antenna

A 15-m-diameter antenna was tested to verify that dimensional tolerances for acceptable performance could be achieved and to verify structural, electromagnetic, and mechanical performance predictions. This antenna utilized the hoop column structure, a gold plated molybdenum mesh reflector, and 96 control cables to adjust the reflector conformance with a paraboloid. The dimensional conformance of the antenna structure and surface was measured with metric camera and theodolites. Near field pattern data were used to assess the electromagnetic performance at five frequencies from 2.225 to 11.6 GHz. The reflector surface was adjusted to greatly improve electromagnetic performance with a finite element model and the surface measurements. Measurement results show that antenna surface figure and adjustments and electromagnetic patterns agree well with predictions.

Schroeder, Lyle C.↗

NASA NTRS2003

Portable Wireless LAN Device and Two-way Radio Threat Assessment for Aircraft Navigation Radios

Measurement processes, data and analysis are provided to address the concern for Wireless Local Area Network devices and two-way radios to cause electromagnetic interference to aircraft navigation radio systems. A radiated emission measurement process is developed and spurious radiated emissions from various devices are characterized using reverberation chambers. Spurious radiated emissions in aircraft radio frequency bands from several wireless network devices are compared with baseline emissions from standard computer laptops and personal digital assistants. In addition, spurious radiated emission data in aircraft radio frequency bands from seven pairs of two-way radios are provided, A description of the measurement process, device modes of operation and the measurement results are reported. Aircraft interference path loss measurements were conducted on four Boeing 747 and Boeing 737 aircraft for several aircraft radio systems. The measurement approach is described and the path loss results are compared with existing data from reference documents, standards, and NASA partnerships. In-band on-channel interference thresholds are compiled from an existing reference document. Using these data, a risk assessment is provided for interference from wireless network devices and two-way radios to aircraft systems, including Localizer, Glideslope, Very High Frequency Omnidirectional Range, Microwave Landing System and Global Positioning System. The report compares the interference risks associated with emissions from wireless network devices and two-way radios against standard laptops and personal digital assistants. Existing receiver interference threshold references are identified as to require more data for better interference risk assessments.

Nguyen, Truong X.↗