Search NASA⌕ Search

SEARCH · Search NASA

Results for “Initiator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Comparative transcriptome analysis of cells from different areas reveals ROS responsive mechanism at sclerotial initiation stage in Morchella importuna

Morels are some of the most highly prized edible and medicinal mushrooms, with great economic and scientific value. Outdoor cultivation has been achieved and expanded on a large scale in China in recent years. Sclerotial formation is one of the most important phases during the morel life cycle, and previous reports indicated that reactive oxygen species (ROS) play an important role. However, ROS response mechanisms at sclerotial initiation (SI) stage are poorly understood. In this study, comparative transcriptome analyses were performed with sclerotial and hyphal cells at different areas in the same plate at SI stage. Gene expression was significantly different at SI stage between sclerotial formation and mycelia growth areas. GO and KEGG analyses indicated more vigorous metabolic characteristics in the hyphae area, while transcription process, DNA repair, and protein processing were enriched in sclerotial cells. Gene expression related to H 2 O 2 production was high in the hyphae area, while expression of H 2 O 2 -scavenging genes was high in sclerotial cells, leading to a higher H 2 O 2 concentration in the hyphal region than in the sclerotium. Minor differences were observed in gene expression of H 2 O 2 -induced signaling pathway in sclerotial and hyphal cells; however, expression levels of the target genes of transcription factor MSN2, important in the H 2 O 2 -induced signaling pathways, were significantly different. MSN2 enhanced stress response regulation in sclerotia by regulating these target genes. Small molecular HSPs were also found upregulated in sclerotial cells. This study indicated that sclerotial cells are more resistant to ROS stress than hyphal cells through transcriptional regulation of related genes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Tripogon loliiformis tolerates rapid desiccation after metabolic and transcriptional priming during initial drying

Abstract Crop plants and undomesticated resilient species employ different strategies to regulate their energy resources and growth. Most crop species are sensitive to stress and prioritise rapid growth to maximise yield or biomass production. In contrast, resilient plants grow slowly, are small, and allocate their resources for survival in challenging environments. One small group of plants, termed resurrection plants, survive desiccation of their vegetative tissue and regain full metabolic activity upon watering. However, the precise molecular mechanisms underlying this extreme tolerance remain unknown. In this study, we employed a transcriptomics and metabolomics approach, to investigate the mechanisms of desiccation tolerance in Tripogon loliiformis , a modified desiccation-tolerant plant, that survives gradual but not rapid drying. We show that T. loliiformis can survive rapid desiccation if it is gradually dried to 60% relative water content (RWC). Furthermore, the gene expression data showed that T. loliiformis is genetically predisposed for desiccation in the hydrated state, as evidenced by the accumulation of MYB, NAC, bZIP, WRKY transcription factors along with the phytohormones, abscisic acid, salicylic acid, amino acids (e.g., proline) and TCA cycle sugars during initial drying. Through network analysis of co-expressed genes, we observed differential responses to desiccation between T. loliiformis shoots and roots. Dehydrating shoots displayed global transcriptional changes across broad functional categories, although no enrichment was observed during drying. In contrast, dehydrating roots showed distinct network changes with the most significant differences occurring at 40% RWC. The cumulative effects of the early stress responses may indicate the minimum requirements of desiccation tolerance and enable T. loliiformis to survive rapid drying. These findings potentially hold promise for identifying biotechnological solutions aimed at developing drought-tolerant crops without growth and yield penalties.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Ultrafast dynamics of fluorene initiated by highly intense laser fields

Here, we present an investigation of the ultrafast dynamics of the polycyclic aromatic hydrocarbon fluorene initiated by an intense femtosecond near-infrared laser pulse (810 nm) and probed by a weak visible pulse (405 nm). Using a multichannel detection scheme (mass spectra, electron and ion velocity-map imaging), we provide a full disentanglement of the complex dynamics of the vibronically excited parent molecule, its excited ionic states, and fragments. We observed various channels resulting from the strong-field ionization regime. In particular, we observed the formation of the unstable tetracation of fluorene, above-threshold ionization features in the photoelectron spectra, and evidence of ubiquitous secondary fragmentation. We produced a global fit of all observed time-dependent photoelectron and photoion channels. This global fit includes four parent ions extracted from the mass spectra, 15 kinetic-energy-resolved ionic fragments extracted from ion velocity map imaging, and five photoelectron channels obtained from electron velocity map imaging. The fit allowed for the extraction of 60 lifetimes of various metastable photoinduced intermediates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Formation of U(VI) peroxide nanoclusters from cascade reactions with a persulfate radical initiator

Radiolysis of water in high radiation fields generates a variety of reactive oxygen species that influence the chemical behavior and complexation of hexavalent uranium. This study investigates the behavior of interaction of a uranyl cation (UO 2 2+ (VI)) with a series of free radicals that are formed in situ via activation of the free radical initiator persulphate (S 2 O 8 2− ), which releases both SO 4 ˙ − and ˙OH species in the solution. Electron Paramagnetic Resonance (EPR) and Raman spectroscopy were used to evaluate the presence of the hydroperoxyl radical (HO 2 ˙) and superoxide radicals (O 2 ˙ − ) that are formed within the solution through radical cascade reactions. In addition, a uranyl peroxide cluster solid (NaU 24 ) was crystallized and characterized using single crystal X-ray diffraction (SCXRD), vibrational spectroscopy, and EPR spectroscopy. The presence of the hydroperoxyl radical (HO 2 ˙) and superoxide radicals (O 2 ˙ − ) was also observed in the solid-state compound, but spectroscopic evidence suggests that it was associated with the Na + network and not the cluster itself. Density functional theory (DFT) calculations were also utilized to further confirm the radical species produced and determine the potential stabilization of radicals detected within the cluster and lattice.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

EMISSA (Exploring Millimeter Indicators of Solar-Stellar Activity): I. The initial millimeter–centimeter main-sequence star sample

Due to their wide wavelength coverage across the millimeter to centimeter (mm–cm) range and their increased sensitivity, modern interferometric arrays facilitate observations of the thermal and non-thermal radiation that is emitted from different layers in the outer atmospheres of stars. We study the spectral energy distribution (S obs (ν)) of main-sequence stars based on archival observations in the mm–cm range with the aim to study their atmospheric stratification as a function of stellar type. The main-sequence stars with significant detection in mm bands were identified in the ALMA Science Archive. These data were then complemented with spectral flux data in the extreme ultraviolet to cm range as compiled from various catalogues and observatory archives. We compared the resultant S obs (ν) of each star with a photospheric emission model (S mod (ν)) calculated with the PHOENIX code. The departures of S obs (ν) from S mod (ν) were quantified in terms of a spectral flux excess parameter (ΔS/S mod ) and studied as a function of stellar type. The initial sample consists of 12 main-sequence stars across a broad range of spectral types from A1 to M3.5 and the Sun-as-a-star as reference. The stars with T eff = 3000–7000 K (F–M type) showed a systematically higher S obs (ν) than S mod (ν) in the mm–cm range. Their ΔS/S mod exhibits a monotonic rise with decreasing frequency. The steepness of this rise is higher for cooler stars in the T eff = 3000–7000 K range, although the single fully convective star (T eff ~ 3000 K) in the sample deviates from this trend. Meanwhile, Sobs(ν) of the A-type stars agrees with S mod (ν) within errors. The systematically high ΔS/S mod in F–M stars indicates hotter upper atmospheric layers, that is, a chromosphere and corona in these stars, like for the Sun. The mm–cm ΔS/S mod spectrum offers a way to estimate the efficiency of the heating mechanisms across various outer atmospheric layers in main-sequence stars, and thereby to understand their structure and activity. We emphasise the need for dedicated surveys of main-sequence stars in the mm–cm range.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Constraints on initial baryon stopping and equation of state from directed flow

Our investigation focuses on the rapidity-dependent directed flow, v 1 (y), of identified hadrons in Au+Au collisions across a broad range of √S NN from 7.7 to 200 GeV. Employing a (3+1)-dimensional hybrid framework, our study successfully reproduces the characteristic features of the measured v 1 (y) for both mesons and baryons across the considered beam energies. Notably, our analysis reveals the constraining power of baryonic v 1 (y) on the initial baryon stopping mechanism. Together with mesonic v 1 (y), the directed flow serves as a crucial tool for probing the equation of state governing dense nuclear matter at finite chemical potentials.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Initial electron cyclotron heating/current drive scoping study for the SMall Aspect Ratio Tokamak (SMART)

In this work an initial electron cyclotron heating/current drive (EC H&CD) scoping study is presented for the SMall Aspect Ratio Tokamak (SMART), constructed and operated by the Plasma Science and Fusion Technology (PSFT) Laboratory of the University of Seville. We consider two planned phases of operation with different magnitude of magnetic field (B 0.4, and 1 T). This EC H&CD scoping study is carried out by using the ray tracing code TRAVIS, which allows to quickly perform a series of scans on the main SMART plasma scenarios. A scan in the poloidal and toroidal launching angles is performed for the B 0.4 T plasma scenario assuming three launching locations (mid-plane, off-mid-plane, and top-launcher) and the extraordinary (X-) mode polarization. The absorption occurs at the second harmonic and, overall, the highest power absorption is obtained launching the EC beam from the top of the machine. A numerical analysis of the fundamental X-mode EC H&CD start-up regime for the B 1.0 T plasma scenario with two different wave frequencies (28 and 35 GHz) is presented showing a very high current drive efficiency.

Bertelli, Nicola [Princeton Plasma Physics Laborat↗
DOE OSTI2020

Shock initiation of the HMX-based explosive PBX 9012: Experiments, uncertainty analysis, and unreacted equation-of-state

In this study, shock initiation experiments have been carried out on the polymer-bonded explosive PBX 9012 [nominally 90% octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazine (HMX), 10% vinylidene–hexafluoropropylene copolymer (Viton A) by weight] in order to provide calibration data for the explosive’s unreacted equation-of-state (EOS) and shock-to-detonation transition for reactive burn rate calibration. The input pressures covered the range of 1.86–4.43 GPa. This provided run-to-detonation depths ranging from > 22.3 mm for the lowest pressure shot to 4.91 mm at the highest pressure. The relative shock sensitivity of PBX 9012 is compared to other HMX-explosives in terms of the Pop-plot, showing that the studied explosive is more sensitive than other similar HMX-based counterparts (with notable exceptions). The uncertainty in the shock velocity determinations from the shock tracker measurements are also investigated, yielding new uncertainty measures in the generated Hugoniot data and run-to-detonation coordinates. Finally, the unreacted equation-of-state is determined using a linear U s – u p Mie–Grüneisen relation and the Davis reactants EOS analytical form, the latter being more suited for reactive burn modeling.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Damage initiation and evolution in Al-Si layered microstructures under shock loading conditions at atomic scales

Designing materials with microstructural features like multiphase interfaces have shown significant promise for usage in the next generation defense and nuclear applications. The dynamic response of these interfaces in extreme environments is observed to vary with the deformability of individual phases, which could subsequently alter the favored damage nucleation sites related to spall failure. Here, we investigate the role of spacing of interfaces in a nanocrystalline layered Aluminum-Silicon system on the shock wave propagation behavior, and microstructural and defect evolution using classical molecular dynamics simulations. The simulations are carried out with different hypothetical Al/Si microstructures including variations in the distribution of Si grains as layers in a nanocrystalline Al matrix. The molecular dynamics simulations suggest that spall failure is preferentially initiated at Al/Si interfaces. In addition, for the same system volume and same concentration of Si, a higher number of layers is marked by an increase in shock wave velocity and reduced resistance to spall failure.

36 MATERIALS SCIENCE↗
DOE OSTI2023

VIPIR: A High-Throughput Drop-Weight Impact Instrument for Imaging the Initiation and Propagation of Reactions in Energetic Materials

Characterizing the handling safety and sensitivity of explosives has been a challenging area of study for over 60 years. Historically one of the most accessible and widely utilized experiments has been the drop-weight impact test, which involves dropping a weight on a small sample sandwiched between two anvils. Because this experiment generally only utilizes sound thresholds to determine whether or not a sample reacted, the physical and chemical properties governing sensitivity remain convolved. Better understanding of chemical and material characteristics is needed to give the chemistry and engineering communities a predictive tool to determine the handling sensitivity of explosives prior to pursuing expensive and potentially hazardous synthesis and formulation operations. Here, we are developing a high throughput drop tower instrument capable of imaging the deformation and flow of energetic materials during impact and the resulting thermal ignition and propagation events. This instrument is based on previous designs but has been modified for higher throughput and tailorable modifications in the future. Herein, we present key design features that enable high-speed visible and thermal imaging of explosive initiation by sub-shock impacts, as well as preliminary results in which ignition sites were observed in an erythritol tetranitrate sample.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Initial surface conditions affecting the formation of plasma on metal conductors driven by a mega-ampere current pulse

Significant variations in plasma formation have been observed for thick aluminum rods with varying initial surface conditions when pulsed by an intense current in a z-pinch configuration. Rods were fabricated on a lathe to a diameter of 1.0 mm followed by a 300 μm wide and 6 mm long strip milled on the surface to remove a portion of the azimuthally extended machining marks left by the lathe. A subset of these rods were then electropolished, reducing the azimuthally extended machining marks as well as reducing the mean surface roughness. Here, the fabrication process provided two types of rods with several surface finishes: a smooth surface (both milled flat face and curved region), a rough surface (milled flat faced region), and an azimuthally extended rough surface (curved region), to study the effect of surface finish on plasma formation. Rods with azimuthally extended surface defects left by the machining process form plasma early compared to rods that have had the azimuthally extended features removed and/or reduce by electropolishing the surface or milling away a section of the surface.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Shock to detonation transition of pentaerythritol tetranitrate (PETN) initially pressed to 1.65 g/cm 3

A novel set of experiments and reactive flow modeling of pentaerythritol tetranitrate (PETN) is presented. In this work, the specific phenomenon of shock to detonation transition is examined, where an initial, relatively weak shock is propagated into pressed PETN powder at 1.65 g/cm 3 and the subsequent buildup to detonation is observed experimentally. These experiments, in conjunction with reactant and products’ equations of state, are utilized for building reactive flow models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

On the relative importance of the different initial conditions that seed the electrothermal instability

Electrothermal instability is responsible for degrading numerous applications of pulsed-power technology, yet the initial conditions from which it grows are not well understood. For the first time, metal surfaces have been tracked from characterization to self-emission. This reveals no clear correlation between non-uniform thermal emissions and surface metallurgical defects or crystallographic grains, while correlations are observed with surface topography for 5N metal but not 6061 metal. Finally, for 5N metal, surfaces with average roughness as small as 5nm still admit thermal perturbations with δT/T >0.1.

42 ENGINEERING↗
DOE OSTI2021

Initial evaluation of a multimodal diamond sensor for simultaneous temperature and radiation measurements

Several experimental disciplines require simultaneous neutron flux and temperature monitoring. This paper provides the groundwork on a diamond sensor concept that could be used in harsh environments where the limits of current technologies are exceeded. Here, we present initial results on the functionality of a multimodal diamond sensor, which can simultaneously sense the presence of alpha particles at a few counts per second at temperatures up to 494 K. Such a sensor may also have applications where both charged particles or neutron detection and temperature measurement are simultaneously desired.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Laboratory study of the PFRC-2's initial plasma densification stages

Initial plasma densification by odd-parity rotating magnetic fields (RMF o ) applied to the linear magnetized Princeton field-reversed configuration (PFRC-2) device with fill gases at pressures near 1 mTorr proceeds through two phases: a slow one, characterized by a rise time $τ_{slow}$ ~ 100 $μ$s, followed by a fast one, characterized by $τ_{fast}$ ~ 10 $μ$s. The transition from slow to fast occurs at a line-integral-averaged electron density, t n e , near 2$\times$ 10 11 cm –3 , independent of magnetic field. Here, over most of the range of experimental parameters investigated, as the PFRC-2 axial magnetic field strength was increased, RMF o power decreased, gas fill pressure lowered, or lower atomic mass unit (AMU) fill gas used, the duration of the slow phase lengthened from 50 $μ$s to longer than 10 ms after the RMF o power began. The post-fast-phase maximum n e increases with the fill-gas AMU, exceeding 5 × 10 13 cm –3 for Ar. The slow phase is consistent with atomic physics processes and field-parallel sound-speed losses. The fast phase may be explained by improved axial confinement, possibly augmented by radial or axial contraction of the plasma. Another possible explanation, a large increase in electron temperature, is inconsistent with x-ray emission. The n e behavior is discussed in relation to the E to H transition.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Initial data for first-order causal viscous conformal fluids in general relativity

We solve the Einstein constraint equations for a first-order causal viscous relativistic hydrodynamic theory in the case of a conformal fluid. For such a theory, a direct application of the conformal method does not lead to a decoupling of the equations, even for constant-mean curvature initial data. We combine the conformal method applied to a background perfect fluid theory with a perturbative argument in order to obtain the result.

Disconzi, Marcelo (ORCID:0000000234497778)↗
DOE OSTI2024

Erratum: “Initial characterization of electron temperature and density profiles in PEGASUS spherical tokamak discharges driven solely by local helicity injection” [Phys. Plasmas 28, 102504 (2021)]

Here, this article describes errata in 'Initial characterization of electron temperature and density profiles in PEGASUS spherical tokamak discharges driven solely by local helicity injection,' Phys. Plasmas 28, 102504 (2021) that correct reported electron temperature values and their implications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗