Search NASA⌕ Search

SEARCH · Search NASA

Results for “PULSE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Combined single-pulse holography and time-resolved laser schlieren for flow visualization

A pulsed ruby laser and continuous-wave argon ion laser were used in a combined setup at the Langley Expansion Tube for single pulse holography and time resolved laser schlieren with a common optical axis. The systems can be operated simultaneously for a single run. For a single frame, the pulsed holographic setup offers the options of shadowgraph, Schlieren, and interferometry from the reconstructed hologram as well as the advantage of post-run sensitivity adjustments. For flow establishment studies the time resolved laser Schlieren provides visualization of the flow field every 12.5 microns for up to 80 frames with an exposure time per frame of 5.4 microns.

Burner, A. W.↗
NASA NTRS1981

On-line pulse control for structural and mechanical systems

This paper studies the feasibility of using open-loop adaptive on-line pulse control for limiting the response of large linear multidegree of freedom systems subjected to general dynamic loading environments. Pulses of short durations are used to control the system when the system response exceeds a given threshold level. The pulse magnitudes are obtained in closed form, leading to large computational efficiencies when compared with optimal control theoretic methods. The technique is illustrated for a structural system subjected to earthquake-like base excitations.

Udwadia, F. E.↗
NASA NTRS1981

Observations of SMC X-1 with the monitor proportional counter on the Einstein /HEAO 2/ X-ray Observatory - The pulse period and its history

The results of the sixth determination of the pulse period of the X-ray source SMC X-1 are presented. The observations were made in April 1979. The pulse period at this epoch was found to be (0.713683 + or - 0.000032) s referred to phase zero of the binary motion. This result together with all available historical data is utilized to quantify the observed trend toward spin-up. It is found that simple secular trends are not applicable. This finding is interpreted as evidence for additional variations in the pulse period. The obtained results are discussed in the context of present theoretical models for period variations in the binary pulsating X-ray sources. The apparent absence of spin-down episodes in the period history of SMC X-1 is also considered.

Darbro, W.↗
NASA NTRS1981

The impact of pulsed RFI on the coded BER performance of the nonlinear satellite communication channel

An examination is conducted of the coded bit error rate (BER) performance of a satellite communication system in which binary phase-shift-keyed (BPSK) modulation is employed, pulsed CW or pulsed noise RFI is present, and the transponder contains a nonlinearity characterized by arbitrary AM/AM and AM/PM characteristics; the RFI pulse duration is further assumed to exceed that of the information symbol. Computed performance curves consider several hypothetical RFI scenarios in which either a hard limiter or an 8 dB clipper represent the transponder amplitude nonlinearity. Results demonstrate the potential seriousness of RFI duty cycles as low as 2 percent, and the fact that CW represents the most severe form of interference.

Weinberg, A.↗
NASA NTRS1982

Programmable Pulse Generator

New pulse generator programmed to produce pulses from several ports at different pulse lengths and intervals and virtually any combination and sequence. Unit contains a 256-word-by-16-bit memory loaded with instructions either manually or by computer. Once loaded, unit operates independently of computer.

Rhim, W. K.↗
NASA NTRS1981

Pulsed-echo interface wave characterization of bolted plates

Ultrasonic waves which propagate along the plane boundary separating two solid substrates were used to characterize aluminum and titanium plates adhesively bonded and bolted together. Wave pulses were used to produce interface waves between the aluminum and a Ti-6Al-4V titanium alloy bar by normal mode conversion. Interface wave reflections from bolt holes drilled through the interface were reconverted to surface wave pulses and detected by the same wedge by standard pulse-echo techniques. Time of flight measurements indicate that the reflected waves are a supersonic of longitudinal modes and circularly symmetric waves that propagate around the bolt hole.

Turner, T. M.↗
NASA NTRS1981

Instrumentation for sensing moisture content of material using a transient thermal pulse

Instrumentation is developed for sensing moisture content of material using a transient thermal pulse and is comprised of a sensing probe having a sensing element in the form of a ribbon excited by a constant current pulse to increase the temperature, and therefore the resistance, of the ribbon linearly. Moisture in web material limits the increase of temperature during the pulse in proportion to the moisture content. This increase in temperature produces a proportional increase in resistivity which is measured with a Wheatsone bridge as a change in voltage displayed by a measurement display unit. The probe is glued in a shallow groove of a lucite bar and connected to copper pins embedded in the bar.

Yang, L. C.↗
NASA NTRS1981

Pulse control of single degree-of-freedom system

The possibility of using active control for structural and mechanical systems is examined. Open loop adaptive control of structural systems subjected to deterministic and stochastic excitations is considered by means of an algorithm for a single-degree-of-freedom oscillator. The algorithm is heuristic and requires continuous monitoring of the state variables, with a pulse control applied when some prespecified level of control is exceeded. The control algorithm is based on the principle that the gradual rhythmic increase of the structural response can be eliminated by applying a pulse of suitable magnitude in the proper direction, thereby avoiding the application of large forces over sustained periods of time. The optimum pulse magnitude is determined as the minimum rms response of the system. Application to linear and nonlinear systems, as well as in chatter suppression, are outlined.

Udwadia, F. E.↗
NASA NTRS1982

Upper limits to pulsed gamma ray emission from PSR 0833-45, 1747-46, and 1818-04

Pulsed gamma ray emission from three pulsars (PSR 0833-45, 1747-46, and 1818-04) have been sought on a balloon flight of the University of New Hampshire Large Gamma Ray Telescope, which incorporates a shielded sodium iodide scintillator array, and was launched from Alice Springs, Australia. Over the energy range 0.1 - 10 MeV, no evidence is found for pulsed gamma rays, and upper limits are set for Vela which are comparable to, or below, the extrapolation to lower energies of the pulsed emission reported by SAS-2 and COS-B.

Cherry, M. L.↗
NASA NTRS1982

Pulsed plasma thruster ignitor plug ignition characteristics

The operating characteristics of the semiconductor spark gap ignitor plug used to initiate the discharge in a pulsed plasma thruster are investigated. Current and voltage waveform measurements for the ignitor plug alone, and for the plug mounted in the thruster cathode indicate an average dynamic impedance of 0.2 ohms for a wide range of operating conditions, and a trigger circuit energy transfer efficiency to the plug on the order of 25%. Two modes of trigger ignition are found which are related to the rise time of the applied voltage pulse. Analysis of plasma characteristics reveals plug erosion to occur primarily in the semiconductor and anode regions, by mechanisms including plug metal embrittlement, plasma sputtering and vaporization caused by the discharge current pulse. Measurements also indicate a plume velocity on the order of 1580,000 cm/sec which increases with trigger circuit stored energy. The results establish levels of performance for future applications of semiconductor spark gap ignitor plugs in plasma devices.

Brady, M. E.↗
NASA NTRS1982

Application of upconversion detection to pulsed CO2 lidar

In this paper the application of an upconversion detector to pulsed CO2 lidar is investigated. In this device a nonlinear IR crystal would be used to convert 10-micron lidar radiation into the visible region for conventional detection with a photomultiplier tube. A pulsed CO2 lidar can be substantially improved with an upconversion detector configured for rejection of thermal background radiation using a narrowband filter for the upconverted signal or a cold filter front end. The sensitivity of the upconversion detector with the narrowband visible wavelength filter is estimated to be 2 orders of magnitude better than that of the usual direct detection diode. The cold filter can improve upconversion detection to nearly the signal-shot limit. These upconversion detectors are not limited by speckle noise as is a pulsed heterodyne detector.

Itabe, T.↗
NASA NTRS1982

X-ray and gamma-ray upper limits for pulsed emission from radio pulsars

Results are given for an HEAO 1 search for pulsed emissions from 11 radio pulsars, in the 15 keV-11 MeV energy range. The upper limits of the Vela pulsar are found to fall below the low-energy extrapolation of the more than 50 MeV pulsed spectrum observed by the COS B satellite, and while consistent with predictions of a polar cap acceleration model, seem barely consistent with a single power-law interpolation between optical intensity and the 50 MeV intensity. High energy X-ray upper limits for seven of the ten other pulsars, which were chosen on the basis of proximity to earth, high rotational energy loss rates and short periods, are found to be only a few percent of their rotational energy losses, assuming a moment of inertia, an emission solid angle, and a pulse duty cycle, that are all similar to the high energy X-ray duty cycle of the Crab pulsar. These upper limits are below the corresponding fraction for the Crab pulsar in the cases of the Vela pulsar, PSR 1929+10 and PSR 1642-03.

Knight, F. K.↗
NASA NTRS1981

Mitigation of pulsed RFI via automatic gain control

Three automatic gain control (AGC) strategies and their potential capabilities for mitigation of pulsed radio frequency interference (RFI) over a coded, nonlinear channel are examined. The first updates the AGC control voltage once each symbol interval in accordance with a prespecified criterion. The second implementation is designed to first detect high level RFI and then appropriately update its gain. The final implementation is a wideband device which updates its gain once each symbol interval by reducing the gain in direct proportion to a suitable power measurement. Computed results treat pulsed noise and pulsed CW RFI and compare performances in terms of bit error rate (BER) at the output of a Viterbi decoder.

Chang, R. W.-S.↗
NASA NTRS1983

Intensity dependence of the pulse profile and polarization of the Vela pulsar

Polarization measurements of the Vela pulsar PSR 0833-45 at 2295 MHz revealed that the radio pulse profile is composed of four components. The four component configuration was found to fit the observed dependence of the pulse profile on the intensity of the pulsar, and the dependence of the modulation index and power spectrum of the intensity fluctuations on the pulse-longitude. Deviations of the observed polarization position angles from those predicted by a rotating vector model were explained by the emission regions for each component being located at different distances from the star. The components are affected by retardation, aberration, and magnetic field curvature effects, all of which contribute to arrival of the components at different longitudes even though the components actually carry the position angle signature predicted by the rotating vector model.

Krishnamohan, S.↗
NASA NTRS1983

The pulse profile of the Crab pulsar in the energy range 45 keV-1.2 MeV

The Crab Nebula pulsar (PSR 0531+21) is the best studied and most intense of the nontransient X-ray pulsars. However, since its spectrum drops rapidly with energy, a well-resolved pulse profile has not previously been obtained above 200 keV. In the hard X-ray and low-energy gamma-ray region, an accurate pulse profile can be obtained with a balloon-borne detector of sufficient area during a single transit of the source. A new measurement of the pulse profile of PSR 0531+21 in the energy range above 45 keV obtained with a large-area scintillation detector array is reported. The detector array was flown on a balloon launched from Palestine, Texas on 1980 October 6, reaching a float altitude 4.5 g/sq cm at 0230 UTC October 7. The primary objective of the experiment was to detect and study weak gamma-ray bursts.

Wilson, R. B.↗
NASA NTRS1983

On searches for periodic pulsed emission - The Rayleigh test compared to epoch folding

The Rayleigh test has been recently invoked as a method of searching a time series for periodic pulsations. In this paper, this technique is discussed and compared to epoch folding, a technique which has had widespread use in X-ray astronomy. It is found that the Rayleigh test provides a more sensitive approach to the search for periodic pulsations when the pulses are sinusoidal or of broad duty cycle, such as those typical of the pulsing X-ray sources. Epoch folding, on the other hand, is more sensitive to the narrow pulses typical of radio pulsars.

Leahy, D. A.↗