Search NASA⌕ Search

SEARCH · Search NASA

Results for “mission applications”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Adaptive Deployable Entry Placement Technology (ADEPT) Development for Small Sat Class Venus Missions

The Adaptable, Deployable Entry and Placement Technology (ADEPT) is a novel approach for entry vehicle design. Similar to an umbrella, it is stowed during launch and deployed prior to entry. ADEPT employs a high performance, 3-D woven, carbon fabric to serve as the primary surface of the mechanically deployed system. The successful ADEPT sounding rocket flight test matured the 1-meter Class ADEPT in the areas of deployment and structural integrity, and provided aerodynamic flight characteristics of the ADEPT open-back configuration from Mach 3 to Mach 0.3. Aerocapture uses the aerodynamic drag from a single hyperbolic atmospheric pass to provide the delta-V needed for orbit insertion. Studies suggest that, compared to propulsive orbit insertion, aerocapture could increase delivered payload by 70 percent at Venus. Drag modulation aerocapture, which shows promise of being simpler and more cost-effective than the more-often studied lift modulation methods, uses in-flight transformations of an entry vehicle's drag area to control the amount of deceleration produced during an atmospheric pass. In single-event drag modulation, a drag device is jettisoned after the appropriate deceleration. ADEPT, due to its unique ability to fold and unfold, is being considered for this SmallSat class payload mission applications.

Cassell, Alan M.↗
NASA NTRS2019

Uncertainty Quantification of Modeled Electron Backstreaming Failure for the NEXT Ion Thruster

Excessive electron back streaming is one of the primary life-limiting failure modes for gridded ion thrusters. Physics-based modeling of the optics grid erosion and electron back streaming margins is augmented with statistical uncertainty quantification techniques to generate a life expectancy distribution of this particular failure mechanism for the NEXT ion thruster. Generation of distributions instead of a single point estimate provide a more comprehensive picture of thruster failure probabilities and life expectation for various mission applications.

Yim, John T.↗
NASA NTRS2019

Bionutrients-1, On-Demand Production of Nutrients in Space

Future long-duration missions face significant challenges maintaining crew health. A critical area is supplying adequate nutrition, as certain vitamins and nutrients in supplied foods and supplements demonstrate substantial degradation during extended storage. To address this issue, we are developing and flight-testing a platform technology that demonstrates in situ microbial production of targeted nutrients over extended mission durations. This 5-year experiment, known as BioNutrients-1, was started on the International Space Station in May 2019. It involves two components: an on-orbit hydration and production experiment; and the development of space-compatible, key bio-manufacturing microorganisms. On-orbit testing utilizes a small “production pack” system that encloses sterile edible growth substrate and desiccated Saccharomyces cerevisiae strains genetically engineered to produce the nutrients beta-carotene or zeaxanthin. On hydration and mixing of the production pack, the organisms revive and grow until limited by the depletion of growth media, hypothetically leading to consistent amounts of biomass and nutrients. In eventual mission applications, the packet contents would be heat treated to inactivate the microorganisms prior to consumption. For these flight experiments, the packet will not be heat treated, but will instead be frozen for return to Earth for analyses. In addition to the production pack trials, 14 different microorganisms/treatments were also delivered to ISS for long-duration storage. These samples will be intermittently returned to Earth and analyzed to determine survival rates and genomics. For this presentation, initial data from returned samples and ground controls will be discussed.

Hindupur, Aditya↗
NASA NTRS2019

BioNutrients-1: On-Demand Production of Nutrients in Space

Future long-duration missions face significant challenges maintaining crew health. A critical area is supplying adequate nutrition, as certain vitamins and nutrients in supplied foods and supplements demonstrate substantial degradation during extended storage. To address this issue, we are developing and flight-testing a platform technology that demonstrates in situ microbial production of targeted nutrients over extended mission durations. This 5-year experiment, known as BioNutrients-1, was started on the International Space Station in May 2019. It involves two components: an on-orbit hydration and production experiment; and the development of space-compatible, key bio-manufacturing microorganisms. On-orbit testing utilizes a small "production pack" system that encloses sterile edible growth substrate and desiccated Saccharomyces cerevisiae strains genetically engineered to produce the nutrients beta-carotene or zeaxanthin. On hydration and mixing of the production pack, the organisms revive and grow until limited by the depletion of growth media, hypothetically leading to consistent amounts of biomass and nutrients. In eventual mission applications, the packet contents would be heat treated to inactivate the microorganisms prior to consumption. For these flight experiments, the packet will not be heat treated, but will instead be frozen for return to Earth for analyses. In addition to the production pack trials, 14 different microorganisms/treatments were also delivered to ISS for long-duration storage. These samples will be intermittently returned to Earth and analyzed to determine survival rates and genomics. For this presentation, initial data from returned samples and ground controls will be discussed.

Hindupur, Aditya↗
NASA NTRS2021

Performance and High-Speed Characterization of a 100-kW Nested Hall Thruster

The performance of a three-channel, 100-kW class nested Hall thruster was evaluated on xenon propellant for total powers up to 102 kW. The thruster demonstrated stable operation in all seven available channel combinations at discharge voltages from 300 V to 500 V and three different current densities. The resulting test matrix contained forty-six unique conditions ranging from 5 to 102 kW total power and 16 to 247 A discharge current. At each operating condition, thrust and telemetry was measured, and from these measurements specific impulse and efficiency were calculated. All seven channel combinations showed similar performance at a given discharge voltage and current density. The largest thrust recorded was 5.4 N ± 0.1 N at 99 kW, 400 V discharge voltage. Total efficiency and specific impulse ranged from 0.54 to 0.67 ± 0.03 and 1800 seconds to 2650 seconds ± 60 seconds, respectively. It was found that the thrust of the three channels firing together was not larger than the sum of each channel firing individually. Discharge current oscillations were also characterized with peak-to-peak and root-mean-square values and with high-speed camera analysis, which provide insight into how the discharge channels oscillate, and how those oscillations are affected by the presence of other operating channels. The implications of these results are discussed in the context of operation beyond 100 kW, as well as the general viability of NHT technology for future mission applications.

High-power↗
NASA NTRSDate not supplied

Cultivating Capabilities for Lunar Extreme Environments

Space Directive 1 establishes that NASA is to " return of humans to the Moon for long-term exploration and utilization". Inherent in this direction, there are environmental challenges including ionizing radiation, extreme thermal ranges, and lunar dust. NASA is making significant investments in technologies to address the array of destinations and mission applications inherent in that challenge. As part of commercial, industry, and academic engagement, NASA has established Lunar Surface Innovation Consortium (LSIC) as an open forum to engage a larger community through six focus groups: in-situ resource utilization (ISRU), excavation and construction, power, extreme access, dust mitigation, and extreme environments. A general overview of the investments – both technology and community development – is presented.

technology↗
NASA NTRSDate not supplied

Modeling Effort of TriTruss Modular Structure for In-Space Assembled Telescope Foundational Structure

The TriTruss is a novel and innovative structural module developed by researchers at the NASA Langley Research Center to construct modular structures which can be assembled on-orbit for future persistent missions, including in-space assembled telescopes and platforms for science and communications. The TriTruss offers unique modular structural features including compact packaging for launch, the possibility of staged packaging, simple robotic deployment and assembly, and design versatility for specific space mission applications. This paper presents the modeling and analysis procedure for the TriTruss modular structure and the predicted frequency response of an In-Space Assembled Telescope’s (iSAT) primary reflector.

Structural Modeling↗
NASA NTRSDate not supplied

Spaceflight Associated Neuro-Ocular Syndrome: A Brief for Astronaut Candidates

INTRODUCTION: Spaceflight Associated Neuro-ocular Syndrome (SANS) was first described in 2011 as a clinical process involving degradation of visual acuity and structural changes of the eye when exposed to microgravity. This syndrome poses a risk to astronaut vision, safety, and mission performance, especially during extended-duration missions. The modern astronaut cohort is a diverse group of men and women including scientists, engineers, teachers, pilots, business professionals, and artists. Given their diverse backgrounds, it is imperative all crews are educated on SANS risks and potential countermeasures. This education must be comprehensive and easily understood, regardless of academic background or specific expertise. TOPIC: A PowerPoint was created to serve as a presentation and stand-alone educational aid for all astronaut candidates (ASCANS). This medium was chosen as it can be updated dynamically as new information emerges. The brief was split into sections to facilitate organized delivery of complex content in easy-to-understand components. Sections included descriptive statistics, signs and symptoms, outcomes, myths and ongoing research, countermeasures, ongoing surveillance, and unknown and future directions. More research is necessary in order to understand this syndrome, and without continued ASCAN participation in research, acquisition of data will not be possible. These efforts will become increasingly critical with deep space and exploration missions. APPLICATION: We recommend regular use of this brief for all ASCANS, and potentially veteran crewmembers, given the high risks and potentially poor outcomes associated with SANS. For ASCANS, recommendations include that this brief be provided at the start of their training, with a bi-annual refresher course for all astronauts. This ensures they are current on SANS information, given the dynamic nature of this syndrome. Additionally, this brief will be made available to all as a self-study aid, utilized as a refresher immediately prior to launch. It is anticipated that this brief will promote the health, safety, and wellbeing of professional and private crews alike, during and after long-duration spaceflight. RESOURCES: Brunstetter, T., Tarver, B., & Tsung, A. (2022, October). Spaceflight Associated Neuro-ocular Syndrome (Sans) and its Risk to Nasa Astronauts. JSC Aerospace Medicine Clerkship. Houston, TX; Lyndon B. Johnson Space Center. Laurie, S. S., Macias, B. R., Pardon, L. P., Brunstetter, T., Tarver, W. J., Gibson, C. R., Greenwald, S. H., Jasien, K. V., Mason, S., & Tsung, A. (2022). (rep.). Evidence Report: Risk of Spaceflight Associated Neuro-ocular Syndrome (SANS). Houston, TX: National Aeronautics and Space Administration. Mader, T. H., Gibson, C. R., Pass, A. F., Kramer, L. A., Lee, A. G., Fogarty, J., ... & Polk, J. D. (2011). Optic disc edema, globe flattening, choroidal folds, and hyperopic shifts observed in astronauts after long-duration space flight. Ophthalmology, 118(10), 2058-2069. LEARNING OBJECTIVES: • The audience will be able to describe current Spaceflight Associated Neuro-ocular Syndrome (SANS) findings, significance, and countermeasures. • The audience will understand the importance of astronauts’ familiarity with SANS prior to flying and the large risks associated with this syndrome. CME QUESTIONS (3 QUESTIONS, MULTIPLE CHOICE A-D): 1. What is the approximate prevalence rate of SANS in astronauts? A. 22% B. 50% C. 66% D. 80% Answer: C. 2. Which of the ocular findings are NOT associated with SANS? A. Optic disc edema B. Retinal detachment C. Globe flattening D. Chorioretinal folds Answer: B. 3. Which of the following diagnostic technologies are NOT available in-flight? A. Ocular ultrasound B. Retinal photography C. MRI Orbit D. Optical Coherence Tomography (OCT) Answer: C.

Sara Stroble Mason↗
NASA NTRS2021

Prototype Development of a Variable Altitude Venus Aerobot

This paper presents the design methodology and results from the first subscale prototype jointly developed by JPL and Near Space Corporation for a variable altitude Venus aerobot. This vehicle is based on the principle of a two-part balloon for which pumping helium gas between the balloons can modulate buoyancy and thereby control the altitude of the vehicle. The intended mission application at Venus is a cloud-level exploration across an altitude range of 52 to 62 kilometers for weeks or months, circumnavigating the planet multiple times and carrying an approximately 100 kg payload module containing all scientific instruments, avionics and other vehicle support systems. The first prototype is approximately one-third scale (4 m diameter) and serves as a proof-of-concept test article allowing for evaluation of manufacturing approaches and laboratory testing to evaluate performance. Two key design features of the prototype as built are the use of Teflon film on the outside of the balloon to protect it from the sulfuric acid aerosols in the Venusian atmosphere and second surface metallization of that film to reflect most incident sunlight and thereby limit diurnal temperature and the associated temperature-driven pressure fluctuations. This prototyping effort has been complemented with a detailed vehicle simulation activity that incorporates the relevant balloon physics and thereby models the expected dynamic behavior of the aerobot in both the Earth and Venus atmospheres. Data obtained in laboratory tests of the prototype have been used to validate, verify and update that simulation model as described in the paper.

Turner, Caleb↗
NASA NTRSDate not supplied

L2-Charged Particle Environment (L2-CPE)Low Energy Radiation Fluence Model

The L2 Charged Particle Environment (L2-CPE) model provides estimates of number flux and fluence for the low energy electron, proton, and alpha particle populations in the near Earth solar wind and the Earth’s distant magnetosheath and magnetotail. The model is an engineering tool for specifying radiation environments over an energy range from a few eV to a few MeV of importance to surface dose and radiation damage to thin space exposed materials and is intended for use in space system design applications. Mission fluences are obtained by simulating a spacecraft flight trajectory through time-dependent bow shock and magnetopause boundaries with dimensions and orientations driven by solar wind parameters. Monte Carlo sampling of flux environments within individual plasma regimes and/or fluence accumulated along a fight trajectory through multiple regimes is used to determine statistical variations (means and extremes) of the differential number flux and fluence environments for each of the three charged particle species. Model output is differential (in energy) number fluence and flux for the three particle species in units of particles/cm2-keV and particles/cm2-sec-keV, respectively. Users can select the energy range of interest but the current version of the code (L2-CPE Version 1.4.2d) is limited to an energy range of 1 eV to 10 MeV. Flux is integrated over angle to give flux and fluence to surfaces in the ±XGSE, ±YGSE, and/or ±ZGSE directions. Figure 1 shows the opening screen from the L2-CPE graphical user interface (GUI) with options for flux, fluence, plotting model output. The flux scene generate is not currently implemented in the GUI.

Joseph I Minow↗
NASA NTRSDate not supplied

NASA's RPS Program Status Update and Future Outlook

Radioisotope Power Systems (RPS) have been safely providing the United States with the power to explore space for almost 65 years. NASA established the RPS Program in 2010 to support specialized science missions and potential future opportunities more effectively and efficiently. The RPS Program ensures the availability of RPS for the exploration of the solar system in environments where conventional solar or chemical power generation is impractical or impossible. NASA missions have utilized space nuclear power to explore planets, moons, and interstellar space, enabling missions to some of the deepest, darkest, and dustiest regions in the solar system and beyond. This scientific exploration has deepened our understanding of the solar system and our role within. The RPS Program, in partnership with the Department of Energy (DOE) Office of Nuclear Energy continues to operate as an interagency partnership to provide robust radioisotope power system solutions to spacecraft that conduct missions to extreme environments for science and exploration. This Program invests in systems and technologies to ensure that NASA maintains this capability well into the future and it manages processes that ensure the safe use and launch of these systems. This paper provides a synopsis of current activities of the RPS Program, and it introduces a focus on the commercialization of RPS to enable a variety of future mission applications.

radioisotope power systems↗
NASA NTRSDate not supplied

MAGIC Mission Science and Applications Related to Cryosphere, Solid Earth and Neutral Atmosphere

The GRACE and GFO missions have revolutionised our understanding of mass movement at and below the surface of the Earth but they, nonetheless, have restrictions related to spatial and temporal resolution and instrument sensitivity that limits our ability to resolve certain processes. In this presentation we focus on the advances and capabilities that the proposed Mass change And Geosciences International Constellation (MAGIC) mission will deliver for cryosphere and solid Earth applications and will also consider the potential it will have for studying the neutral atmosphere. The time-varying gravity missions to date have had an effective spatial resolution of ~300 km, which is larger than the scale of any glacier or ice caps and larger than most catchments on the Greenland Ice Sheet. Even over Antarctica, the limited spatial resolution is a major limitation for regions such as the Antarctic Peninsula. Tectonic process, such as Earthquakes, volcanic activity and even viscous mantle flow can take place on scales smaller than can be resolved currently. The target resolution and accuracy for MAGIC over ice is 170 km at 2.6 mm/yr EWH over the long term and 250 km at 5.5 mm EWH at monthly resolution plus lower accuracy daily to weekly capabilities. We consider here what this means for understanding and observing ice mass exchange with the oceans and improving our ability to measure the manometric contribution to sea level rise. Based on similar targets, we also explore the improvements this offers for monitoring different types of solid Earth processes including geohazards, crustal evolution and deep interior properties and dynamics. We also consider what contributions MAGIC will be able to make to observations of thermosphere neutral density and related atmospheric parameters.

Jonathan Bamber↗
NASA NTRS2008

Rapid Cost Assessment of Space Mission Concepts Through Application of Complexity-Based Cost Indices

This slide presentation reviews the development of a rapid cost assessment models for evaluation of exploration missions through the application of complexity based cost indices. In Fall of 2004, NASA began developing 13 documents, known as "strategic roadmaps," intended to outline a strategy for space exploration over the next 30 years. The Third Strategic Roadmap, The Strategic Roadmap for Solar System Exploration, focused on strategy for robotic exploration of the Solar System. Development of the Strategic Roadmap for Solar System Exploration led to the investigation of a large variety of missions. However, the necessity of planning around scientific inquiry and budgetary constraints made it necessary for the roadmap development team to evaluate potential missions not only for scientific return but also cost. Performing detailed cost studies for each of the large number of missions was impractical given the time constraints involved and lack of detailed mission studies; so a method of rapid cost assessment was developed by us to allow preliminary analysis. It has been noted that there is a strong correlation between complexity and cost and schedule of planetary missions. While these correlations were made after missions had been built and flown (successfully or otherwise), it seemed likely that a similar approach could provide at least some relative cost ranking. Cost estimation relationships (CERs) have been developed based on subsystem design choices. These CERs required more detailed information than available, forcing the team to adopt a more high level approach. Costing by analogy has been developed for small satellites, however, planetary exploration missions provide such varying spacecraft requirements that there is a lack of adequately comparable missions that can be used for analogy.

cost estimation↗
NASA NTRS2022

Planetary protection assessment of radioisotope thermoelectric generator (RTG)-powered landed missions to ocean worlds: application to Enceladus

Landed missions to icy worlds with a subsurface liquid water ocean must meet planetary protection requirements, and ensure a sufficiently small likelihood of any microorganism-bearing part of the landed element reaching the ocean. A higher bound on this likelihood is set by the potential for radioisotope thermoelectric generator (RTG) power sources, the hottest possible landed element, to melt through the ice shell and reach the ocean. Here, we quantify this potential as a function of three key parameters: surface temperature, ice shell thickness (i.e., heat flux through the shell), and thickness of a porous (insulating) snow or regolith cover. Although the model we describe can be applied to any ocean world, we present results in the context of a landed mission concept to the south polar terrain of Saturn’s moon Enceladus. In this particular context, we discuss planetary protection considerations for landing site selection. The likelihood of forward microbial contamination of Enceladus’ ocean by an RTG-powered landed mission can be made sufficiently low to not undermine compliance with planetary protection policy.

Marc Neveu↗
NASA NTRS2002

Smart Aerospace eCommerce: Using Intelligent Agents in a NASA Mission Services Ordering Application

This paper describes how intelligent agent technology was successfully prototyped and then deployed in a smart eCommerce application for NASA. An intelligent software agent called the Intelligent Service Validation Agent (ISVA) was added to an existing web-based ordering application to validate complex orders for spacecraft mission services. This integration of intelligent agent technology with conventional web technology satisfies an immediate NASA need to reduce manual order processing costs. The ISVA agent checks orders for completeness, consistency, and correctness, and notifies users of detected problems. ISVA uses NASA business rules and a knowledge base of NASA services, and is implemented using the Java Expert System Shell (Jess), a fast rule-based inference engine. The paper discusses the design of the agent and knowledge base, and the prototyping and deployment approach. It also discusses future directions and other applications, and discusses lessons-learned that may help other projects make their aerospace eCommerce applications smarter.

Moleski, Walt↗
NASA NTRS2018

Possible LISA Technology Applications for Other Missions

The Laser Interferometer Space Antenna (LISA) has been selected as the third large class mission launch opportunity of the Cosmic Visions Program by the European Space Agency (ESA). LISA science will explore a rich spectrum of astrophysical gravitational-wave sources expected at frequencies between 0.0001 and 0.1 Hz and complement the work of other observatories and missions, both space and ground-based, electromagnetic and non-electromagnetic. Similarly, LISA technology may find applications for other missions. This paper will describe the capabilities of some of the key technologies and discuss possible contributions to other missions.

Livas, Jeffrey↗
NASA NTRS1989

Planetary protection policy overview and application to future missions

The current status of planetary protection (quarantine) policy within NASA is discussed, together with the issues of planetary protection and back-contamination as related to future missions. The policy adopted by COSPAR in 1984 (and recently reaffirmed by the NASA Administrator) for application to all unmanned missions to other solar system bodies and all manned and unmanned sample return missions is examined. Special attention is given to the implementation of the policy and to the specific quarantine-related constraints on spacecraft involved in solar system exploration that depend on the nature of the mission and the identity of the target body.

Rummel, John D.↗
NASA NTRS2006

Leveraging Existing Mission Tools in a Re-Usable, Component-Based Software Environment

Emerging methods in component-based software development offer significant advantages but may seem incompatible with existing mission operations applications. In this paper we relate our positive experiences integrating existing mission applications into component-based tools we are delivering to three missions. In most operations environments, a number of software applications have been integrated together to form the mission operations software. In contrast, with component-based software development chunks of related functionality and data structures, referred to as components, can be individually delivered, integrated and re-used. With the advent of powerful tools for managing component-based development, complex software systems can potentially see significant benefits in ease of integration, testability and reusability from these techniques. These benefits motivate us to ask how component-based development techniques can be relevant in a mission operations environment, where there is significant investment in software tools that are not component-based and may not be written in languages for which component-based tools even exist. Trusted and complex software tools for sequencing, validation, navigation, and other vital functions cannot simply be re-written or abandoned in order to gain the advantages offered by emerging component-based software techniques. Thus some middle ground must be found. We have faced exactly this issue, and have found several solutions. Ensemble is an open platform for development, integration, and deployment of mission operations software that we are developing. Ensemble itself is an extension of an open source, component-based software development platform called Eclipse. Due to the advantages of component-based development, we have been able to vary rapidly develop mission operations tools for three surface missions by mixing and matching from a common set of mission operation components. We have also had to determine how to integrate existing mission applications for sequence development, sequence validation, and high level activity planning, and other functions into a component-based environment. For each of these, we used a somewhat different technique based upon the structure and usage of the existing application.

Greene, Kevin↗