Search NASA⌕ Search

SEARCH · Search NASA

Results for “Decay rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Cautionary Notes on Cosmogenic W-182 and Other Nuclei in Lunar Samples

Leya et al. (2000) showed that neutron capture on Ta-181 results in a production rate of Ta-182 (decays with a half-life of 114 days to W-182) sufficiently high to cause significant shifts in W-182 abundances considering the neutron fluences due to the cosmic ray cascade that were known to occur near the lunar surface. Leya et al. concluded that this cosmogenic production of W-182 may explain the large positive epsilon(sub W-182) values that Lee et al. (1997) had reported in some lunar samples rather than being produced from decay of now extinct Hf-182 (bar tau = 13 x 10(exp 6) yr). If the large range in epsilon(sub W-182) of lunar samples (0 to +11 in whole rock samples) was due to decay of now extinct Hf-182, it would require a very early time of formation and differentiation of the lunar crust-mantle system (with high Hf/W ratios) during the earliest stages of Earth s accretion. This result was both surprising and difficult to understand. The ability to explain these results by a more plausible mechanism is therefore very attractive. In a recent report Lee et al. (2002) showed that there were excesses of W-182 and that epsilon(sub W-182) was correlated with the Ta/W ratios in the mineral phases of individual lunar rock samples. This is in accord with W-182 variations in lunar samples being produced by cosmic-ray induced neutron capture on Ta-182.

Yin, Qingzhu↗

Effects of Elevated Free-Stream Turbulence on Active Control of a Separation Bubble

The Effects of elevated free-stream turbulence (FST) on the natural and periodically excited separation bubbles were studied experimentally, due to the relevance of this flow to low-pressure turbine blades at low Reynolds numbers. A bubble was formed at the leading edge of a flat plate and the FST level was altered by placing a grid across the flow at different locations upstream of the plate. The mixing across the separated shear-layer, forming the free boundary of the bubble, increased due to the elevated FST and due to nominally two-dimensional periodic excitation, both flattening and shortening the bubble. Periodic excitation at frequencies that were at least an order of magnitude lower than those associated with the initial shear-layer instability, were very effective at low FST, because the amplitudes of the excitation frequency and its harmonic were amplified over the bubble. High frequency excitation (F+ 3, based on the length of the baseline low FST bubble) had a major effect close to the separation location, while farther downstream the excited fluctuations rapidly decayed in the reattachment region. Low frequency excitation, that generated waves comparable to the length of the unperturbed bubble (F+ 1) were less effective and their magnitude decayed at a slower rate downstream of reattachment. An increase in the level of the FST reduced the net effect of the periodic excitation on the mixing enhancement and subsequent reattachment process, probably due to a destructive interference between the nominally 2D excitation and the random (in space and time) FST, reducing the spanwise coherence and therefore the effectiveness of the current control strategy. However, even at the reduced effectiveness of 2D periodic excitation at elevated FST, it accelerated the reattachment process and the recovery rate of the reattached boundary layer, enhancing the boundary layer resistance to repeat separation and reducing its momentum loss further downstream.

Ashpis, D.↗

SST Improvements in the NASA GMAO Weather Analysis and Prediction System

It is well known that the sea surface temperature (SST) exhibits a diurnal cycle. Since January 2017, the NASA GMAO's Weather Analysis & Prediction System (https://gmao.gsfc.nasa.gov/weather_prediction/) includes a model for this diurnal cycle, a cool-skin layer and assimilates for skin SST. Data assimilation for the skin SST is carried out along with the 3-D state of the atmosphere, primarily using infrared radiance measurements, that are sensitive to the cool-skin and diurnal warming. In the context of Numerical Weather Prediction (NWP), this implies that the skin SST from our system is tightly coupled to the overlaying atmosphere and constrained by all the available atmospheric and surface-sensitive observations (in situ and satellite brightness temperatures). Comparisons of the SST diurnal cycle with other SST retrievals (SEVIRI (Spinning Enhanced Visible & InfraRed Imager) and AMSR-2 (Advanced Microwave Scanning Radiometer-2)) has shown mostly similar diurnal variation, however, the former decays at a faster rate. This poster presents our SST plus atmosphere assimilation methodology, and recent improvements to the skin SST model to address the known issues. Global, hourly estimates of the cool-skin and diurnal warm layer fields would be of interest to the SST retrieval community.

Akella, Santha↗

Cyclotron lines in gamma-ray bursts and magnetic field decay

The presence of cyclotron lines in a significant fraction of gamma-ray burst spectra suggests a source association with strongly magnetized neutron stars. The burster distance scale is not known, but it is constrained by their angular- and brightness distribution. Using pulsar data, the corresponding age distribution of Galactic neutron stars are calculated and an exponential field decay model is applied to test whether the observed incidence rate of cyclotron lines is consistent with decay time scales derived for radio pulsars. It is found that the statistical properties of gamma-ray bursts are inconsistent with the idea of events originating at arbitrary times on neutron stars whose fields decay on time scales shorter than about 10 yrs. Possible interpretations of this inconsistency with radio pulsar field decay models are discussed.

Hartmann, Dieter H.↗

Kinetics of the reaction OH + HO2 yields H2O + O2 from 254 to 382 K

The discharge-flow resonance fluorescence technique has been used to determine the absolute rate constant for the reaction OH + HO2 yields H2O + O2 from 254 to 382 K at a total pressure of 1 Torr. Pseudo-=first-order conditions were used with HO2 in large excess over OH. The rate constant was obtained directly from observed decays of OH and measured concentrations of HO2. Since the observed rate constant was found to be very sensitive to small background concentrations of O and H atoms, NO2 was used to remove both atom species from the system. With added NO2 the result at 299 K is (1.1 + or - 0.3) x 10 to the -10th cu cm/molecule where the error limits are one standard deviation and include an estimate of overall experimental uncertainty. The temperature dependence expressed in Arrhenius form is (4.8 + or - 0.8) x 10 to the -11th exp (250 + or - 50)/T. The results are independent of the type of reactor surface and the precursor used to produce OH and HO2. The present results agree well with earlier measurements near 1-atm total pressure and suggest that this rate constant exhibits little or no pressure dependence between 1 and 1000 Torr.

Keyser, Leon F.↗

Enhanced Elliptic Grid Generation

An enhanced method of elliptic grid generation has been invented. Whereas prior methods require user input of certain grid parameters, this method provides for these parameters to be determined automatically. "Elliptic grid generation" signifies generation of generalized curvilinear coordinate grids through solution of elliptic partial differential equations (PDEs). Usually, such grids are fitted to bounding bodies and used in numerical solution of other PDEs like those of fluid flow, heat flow, and electromagnetics. Such a grid is smooth and has continuous first and second derivatives (and possibly also continuous higher-order derivatives), grid lines are appropriately stretched or clustered, and grid lines are orthogonal or nearly so over most of the grid domain. The source terms in the grid-generating PDEs (hereafter called "defining" PDEs) make it possible for the grid to satisfy requirements for clustering and orthogonality properties in the vicinity of specific surfaces in three dimensions or in the vicinity of specific lines in two dimensions. The grid parameters in question are decay parameters that appear in the source terms of the inhomogeneous defining PDEs. The decay parameters are characteristic lengths in exponential- decay factors that express how the influences of the boundaries decrease with distance from the boundaries. These terms govern the rates at which distance between adjacent grid lines change with distance from nearby boundaries. Heretofore, users have arbitrarily specified decay parameters. However, the characteristic lengths are coupled with the strengths of the source terms, such that arbitrary specification could lead to conflicts among parameter values. Moreover, the manual insertion of decay parameters is cumbersome for static grids and infeasible for dynamically changing grids. In the present method, manual insertion and user specification of decay parameters are neither required nor allowed. Instead, the decay parameters are determined automatically as part of the solution of the defining PDEs. Depending on the shape of the boundary segments and the physical nature of the problem to be solved on the grid, the solution of the defining PDEs may provide for rates of decay to vary along and among the boundary segments and may lend itself to interpretation in terms of one or more physical quantities associated with the problem.

Kaul, Upender K.↗

The entropy rate admissibility criterion for solution of hyperbolic conservation laws

The entropy rate admissibility criterion for solutions of hyperbolic conservation laws is numerically analyzed. The following admissibility criterion for solutions of hyperbolic conservation laws is proposed: a weak solution is admissible if the total entropy decays with the highest possible rate. The equivalence of this criterion and viscosity criterion is established for the single equation and the system of equations of one dimensional nonlinear elasticity.

Dafermos, C. M.↗

Electrical coupling effects on the temporal evolution of F layer plasma structure

A time dependent model of F region structure decay by 'classical' cross field diffusion and electrical coupling along magnetic field lines to the E region is examined. The temporal behavior of the ion concentration fluctuations is determined by the electric field in the coupled system as well as by the initial perturbation spectra and the E region recombination rate. The formation of image structure in the E region ion concentration affects the lifetime of F layer structure in a scale size dependent way. Once an image is formed, the image amplitude and the driving F region structure amplitude decay at the same rate. At large scale sizes of at least lambda(2pi/k), this rate is proportional to k2 and the ratio of the temperatures in each region. At small scale sizes it depends on the E region recombination rate and the temperatures of the two regions but is only very weakly dependent on k. The background E region concentration determines the wave number beyond which the structure amplitude decay rate is almost independent of its scale size.

Heelis, R. A.↗

Implications of atmospheric Ar-40 escape on the interior structure of the moon

Radiogenic Ar-40 escapes from the lunar atmosphere at a rate of about 2 x 10 to the 21st atoms/sec. This amounts to 8% of the rate of argon production in the entire moon by potassium decay. A curious feature of the argon escape rate is a variability with time scale of several months. It is shown that the variation in argon loss correlates with high-frequency lunar teleseismic events. The only apparent region of the moon which could possibly supply the amount of argon needed for escape via a plausible temporal mechanism is a semimolten asthenosphere which may be entirely primitive unfractionated lunar material, or an Fe-FeS core that is enriched in potassium. A core that is devoid of potassium is not compatible with the atmospheric argon measurements.

Hodges, R. R., Jr.↗

Gamma-ray bursts and neutron star field decay

Assuming a Galactic origin of gamma-ray bursts, we use pulsar data to calculate the spatial distribution of neutron stars and determine the sampling depths of current detectors. Based on these distance limits, we calculate the corresponding age distribution of Galactic neutron stars and apply an exponential field decay model to test whether the observed high incidence rate of cyclotron lines is consistent with suggested field decay time scales of order 10 exp 7 years. We find that the properties of the observed population of gamma-ray bursts are inconsistent with the idea that bursts originate at arbitrary times on neutron stars whose fields decay on time scales shorter than about 10 exp 9 years. Possible interpretations of this inconsistency are discussed.

Hartmann, Dieter↗

Kinetics and Mechanism of the Reaction of Hydoxyl Radicals with Acetonitrile under Atmospheric Conditions

The pulsed laser photolysis-pulsed laser induced fluorescence technique has been employed to determine absolute rate coefficients for the reaction OH + CH3CN (1) and its isotopic variants, OH + CD3CN (2), OD + CH3CN (3), and OD + CD3CN (4). Reactions 1 and 2 were studied as a function of pressure and temperature in N2, N2/O2, and He buffer gases. In the absence of O2 all four reactions displayed well-behaved kinetics with exponential OH decays and pseudo-first rate constants which were proportional to substrate concentration. Data obtained in N2 over the range 50-700 Torr at 298 K are consistent with k(sub 1), showing a small pressure dependence. The Arrhenius expression obtained by averaging data at all pressures in k(sub 1)(T) = (1.1(sup +0.5)/(sub -0.3)) x 10(exp -12) exp[(-1130 +/- 90)/T] cu cm /(molecule s). The kinetics of reaction 2 are found to be pressure dependent with k(sub 2) (298 K) increasing from (1.21 +/- 0.12) x 10(exp -14) to (2.16 +/- 0.11) x 10(exp -14) cm(exp 3)/ (molecule s) over the pressure range 50-700 Torr of N2 at 298 K. Data at pressures greater than 600 Torr give k(sub 2)(T) = (9.4((sup +13.4)(sub -5.0))) x 10(exp -13) exp[(-1180 +/- 250)/T] cu cm/(molecule s). The rates of reactions 3 and 4 are found to be independent of pressure over the range 50-700 Torr of N2 with 298 K rate coefficient given by k(sub 3) =(3.18 +/- 0.40) x 10(exp -14) cu cm/(molecule s) and k(sub 4) = (2.25 +/-0.28) x 10(exp -14) cu cm/(molecule s). In the presence of O2 each reaction shows complex (non-pseudo-first-order) kinetic behavior and/or an apparent decrease in the observed rate constant with increasing [O2], indicating the presence of significant OH or OD regeneration. Observation of regeneration of OH in (2) and OD in (3) is indicative of a reaction channel which proceeds via addition followed by reaction of the adduct, or one of its decomposition products, with O2. The observed OH and OD decay profiles have been modeled by using a simple mechanistic scheme to extract kinetic information about the adduct reations with O2 and branching ratios for OH regeneration. A plausible mechanism for OH regeneration in (2) involves OH addition to the nitrogen atom followed by O2 addition to the cyano carbon atom, isomeriazation and decomposition to D2CO + DOCN + OH. Our results suggest that the OH + CH3CN reaction occurs via a complex mechanism involving both bimolecular and termolecular pathways, analogous to the mechanisms for the the important atmospheric reactions of OH with CO and HNO3.

Hynes, A. J.↗

Recurrent brief X-ray bursts from the globular cluster NGC 6624

Observational data are presented on ten brief X-ray bursts, recurrent at nearly equal time intervals, recorded during a two-day observation of 3U 1820-30 in the globular cluster NGC 6624 with the wide-field modulation collimator detectors on the SAS-3 X-ray observatory. The occurrence times were fitted by least squares to a linear sequence with an rms deviation of 621 sec, corresponding to a phase jitter of 3.9%. The bursts were observed in two energy channels. For a sequence of five of the most clearly observed bursts, the 2-6 keV rate rose to its peak value in about 1 sec and then decayed to preburst level in about 10 sec. The 6-11 keV rate rose more slowly and decayed similarly. The smooth decay of their averaged light curve suggests the temporal evolution may have a geometrical origin, where Compton scattering in a surrounding cloud of hot plasma stretches the pulse out and causes a progressive hardening of the spectrum.

Clark, G. W.↗

Meteor wake in high frame-rate images--implications for the chemistry of ablated organic compounds

Extraterrestrial organic matter may have been chemically altered into forms more ameanable for prebiotic chemistry in the wake of a meteor after ablation. We measured the rate of cooling of the plasma in the meteor wake from the intensity decay just behind a meteoroid by freezing its motion in high frame-rate 1000 frames/s video images, with an intensified camera that has a short phosphor decay time. Though the resulting cooling rate was found to be lower than theoretically predicted, our calculations indicated that there would have been insufficient collisions to break apart large organic compounds before most reactive radicals and electrons were lost from the air plasma. Organic molecules delivered from space to the early Earth via meteors might therefore have survived in a chemically altered form. In addition, we discovered that relatively small meteoroids generated far-ultraviolet emission that is absorbed in the immediate environment of the meteoroid, which may chemically alter the atmosphere over a much larger region than previously recognized.

Meteoroids↗

Validation of Test Methods for Air Leak Rate Verification of Spaceflight Hardware

As deep space exploration continues to be the goal of NASAs human spaceflight program, verification of the performance of spaceflight hardware becomes increasingly critical. Suitable test methods for verifying the leak rate of sealing systems are identified in program qualification testing requirements. One acceptable method for verifying the air leak rate of gas pressure seals is the tracer gas leak detector method. In this method, a tracer gas (commonly helium) leaks past the test seal and is transported to the leak detector where the leak rate is quantified. To predict the air leak rate, a conversion factor of helium-to-air is applied depending on the magnitude of the helium flow rate. The conversion factor is based on either the molecular mass ratio or the ratio of the dynamic viscosities. The current work was aimed at validating this approach for permeation-level leak rates using a series of tests with a silicone elastomer O-ring. An established pressure decay method with constant differential pressure was used to evaluate both the air and helium leak rates of the O-ring under similar temperature and pressure conditions. The results from the pressure decay tests showed, for the elastomer O-ring, that neither the molecular flow nor the viscous flow helium-to-air conversion factors were applicable. Leak rate tests were also performed using nitrogen and argon as the test gas. Molecular mass and viscosity based helium-to-test gas conversion factors were applied, but did not correctly predict the measured leak rates of either gas. To further this study, the effect of pressure boundary conditions was investigated. Often, pressure decay leak rate tests are performed at a differential pressure of 101.3 kPa with atmospheric pressure on the downstream side of the test seal. In space applications, the differential pressure is similar, but with vacuum as the downstream pressure. The same O-ring was tested at four unique differential pressures ranging from 34.5 to 137.9 kPa. Up to six combinations of upstream and downstream pressures for each differential pressure were compared. For a given differential pressure, the various combinations of upstream and downstream dry air pressures did not significantly affect the leak rate. As expected, the leak rate of the O-ring increased with increasing differential pressure. The results suggested that the current leak test pressure conditions, used to verify spacecraft sealing systems with elastomer seals, produce accurate values even though the boundary conditions do not model the space application.

helium leak detector↗

Analyses of ∼0.05-2 Mev Ions Associated With the 2022 February 16 Esp Event Observed by Parker Solar Probe

We present analyses of 0.05–2 MeV ions from the 2022 February 16 energetic storm particle event observed by Parker Solar Probe's (PSP) IS⊙IS/EPI-Lo instrument at 0.35 au from the Sun. This event was characterized by an enhancement in ion fluxes from a quiet background, increasing gradually with time with a nearly flat spectrum, rising sharply near the arrival of the coronal mass ejection (CME) driven shock, becoming nearly a power-law spectrum, then decaying exponentially afterwards, with a rate that was independent of energy. From the observed fluxes, we determine diffusion coefficients, finding that far upstream of the shock the diffusion coefficients are nearly independent of energy with a value of 10 20 cm 2 /s. Near the shock, the diffusion coefficients are more than one order of magnitude smaller and increase nearly linearly with energy. We also determine the source of energetic particles, by comparing ratios of the intensities at the shock to estimates of the quiet time intensity to predictions from diffusive shock acceleration theory. We conclude that the source of energetic ions is mostly the solar wind for this event. We also present potential interpretations of the near-exponential decay of the intensity behind the shock. One is that we suggest the shock was over-expanding when it crossed PSP and the energetic particle intensity decreased behind the shock to fill the expanding volume. Over-expanding CMEs could well be more common closer to the Sun, and this is an example of such a case.

Joe Giacalone↗

Analyses of ∼0.05–2 MeV Ions Associated with the 2022 February 16 Energetic Storm Particle Event Observed By Parker Solar Probe

We present analyses of 0.05–2 MeV ions from the 2022 February 16 energetic storm particle event observed by Parker Solar Probeʼs (PSP) ISeIS/EPI-Lo instrument at 0.35 au from the Sun. This event was characterized by an enhancement in ion fluxes from a quiet background, increasing gradually with time with a nearly flat spectrum, rising sharply near the arrival of the coronal mass ejection (CME)–driven shock, becoming nearly a power-law spectrum, then decaying exponentially afterward, with a rate that was independent of energy. From the observed fluxes, we determine diffusion coefficients, finding that far upstream of the shock the diffusion coefficients are nearly independent of energy, with a value of 10 20 cm 2 s −1 . Near the shock, the diffusion coefficients are more than 1 order of magnitude smaller and increase nearly linearly with energy. We also determine the source of energetic particles, by comparing ratios of the intensities at the shock to estimates of the quiet-time intensity to predictions from diffusive shock acceleration theory. We conclude that the source of energetic ions is mostly the solar wind for this event. We also present potential interpretations of the near-exponential decay of the intensity behind the shock. One possibility we suggest is that the shock was over expanding when it crossed PSP and the energetic particle intensity decreased behind the shock to fill the expanding volume. Over expanding CMEs could well be more common closer to the Sun, and this is an example of such a case.

Interplanetary particle acceleration↗

On the applicability of lunar breccias for paleomagnetic interpretations.

The weak but definite remanent magnetization of returned lunar samples is discussed. In general, the breccias have the possibility of carrying a significant viscous remanent magnetism (VRM) when exposed to magnetic fields. The two samples studied appear to exemplify two limiting cases which can be clearly related to the iron distribution present. The VRM measured in the laboratory must have been acquired by the samples since their return to earth because the time decay proceeds at such a rate that any viscous remanence will disappear in less than half a year. In spite of the viscous effects there seems to be little question that some breccias carry a recognizable stable remanent magnetism which is very much like that found in the igneous rocks, both in stability and intensity. It is concluded that it is possible to use some of the breccias to reconstruct the history of the lunar magnetic field.

Gose, W. A.↗

Gamma-rays, cosmic rays, and galactic structure

The relation of SAS-2 observations of galactic gamma-rays to the large scale distribution of cosmic rays and interstellar gas in the galaxy is reviewed. Starting with a discussion of production rates, the case for pion decay being the predominant production mechanism in the galactic disk above 100 MeV is reestablished, and it is also pointed out that Compton gamma-rays can be a significant source near l = 0. The concepts of four distinct galactic regions are defined, viz. the nebulodisk, ectodisk, radiodisk and exodisk. Bremsstrahlung and pion decay gamma-rays are associated with the first two (primarily the first) regions, and Compton gamma-rays and synchrotron radiation are associated with the latter two regions. On a large scale, the cosmic rays, interstellar gas (primarily H2 clouds in the inner galaxy) and gamma-ray emissivity all peak between 5 and 6 kpc from the galactic center. This correlation is related to correlation with other population I phenomena and is discussed in terms of the density wave concept of galactic structure.

Stecker, F. W.↗