Results for “Detection approach” — Page 25

NASA NTRS1993

A new way to measure the composition of the interstellar gas surrounding the heliosphere

The composition of neutral gas in the Local Interstellar Medium can be studied by direct, in situ measuring of interstellar neutral atoms penetrating into interplanetary space. A novel experimental approach for in situ atom detection, which has never been used earlier in space, is proposed. The technique is based on the conversion of neutral atoms to negative ions at a specially prepared sensitive surface. Negative ions are subsequently analyzed and detected in an essentially noise-free, multicoincidence mode. It is shown that interstellar hydrogen, deuterium, and oxygen atoms can be measured by the proposed technique. The experiment can be performed from a high-apogee Earth-orbiting satellite or from a deep space probe.

Gruntman, Michael A.↗

NASA NTRS1985

Aerosol pattern correlation techniques of wind measurement

This paper reviews the current status of lidar image correlation techniques of remote wind measurement. It also examines the potential use of satellite borne lidar global wind measurements using this approach. Lidar systems can easily detect spatial variations in the volume scattering cross section of naturally occurring aerosols. Lidar derived RHI, PPI and range-time displays of aerosol backscatter have been extensively employed in the study of atmospheric structure. Descriptions of this type of data can be obtained in many references including Kunkel et al. (1977), Kunkel et al. (1980), Boers et al. (1984), Uthe et al. (1980), Melfi et al. (1985) and Browell et al. (1983). It is likely that the first space-borne lidars for atmospheric studies will observe aerosol backscatter to measure parameters such as boundary layer depth and cloud height. This paper examines the potential application of these relatively simple aerosol backscatter lidars to global wind measurements.

Eloranta, Edwin W.↗

NASA NTRS1990

Supply Current Diagnosis in VLSI

This paper presents a technique based upon the power supply current signature (cd) which allows for the testing of mixed-signal systems, in situ. Through experiments with a microprocessor, the cd is shown to contain important information concerning the operational status of the system which may be easily extracted using approaches based on statistical signal detection theory. The fault-detection performance of these techniques is compared to that achieved through auto-regressive modeling of the cd.

Frenzel, J. F.↗

NASA NTRS1994

On the detection of mutual perturbations as proof of planets around PSR1257+12

Unambiguous detection of the consequences of mutual perturbations of the hypothesized planets about the pulsar PSR1257+12 would be unassailable proof of their existence. Nearly all of the residuals in the times of arrival (TOA) of the pulses after subtraction of the TOA predicted from the best fit constant period model are accounted for by including the effects of two orbiting planets with constant orbital parameters. The nature and magnitude of additional residuals in the TOA due to the gravitational interactions between the planets are determined by numerically calculating the TOA residuals for the orbital motion including the perturbations and subtracting the TOA residuals from analytic expressions of the orbital motion with orbital parameters fixed at averaged values. The TOA residual differences so obtained oscillate with periods comparable to the orbital periods with the oscillations varying in amplitude as a function of epoch within any given observational period. The signature of the perturbations is thus a quasiperiodic modulation of the residual differences obtained after removal of the effects of the orbital motion with best fit, constant orbital parameters. The amplitudes of this modulation reach about 10 microsecond for observational periods exceeding 1000 days for the minimum planetary masses with sin i = 1, and they increase as 1/sin i for 1/sin i less than 5, where i is the inclination of the orbit plane to that of the sky. Greater accumulated phase differences between the effects of perturbed and unperturbed orbital motions are available in the times of zero values in the observed and predicted TOA residuals and these comprise a second signature of the perturbations. The perturbation signatures should become detectable as the observation interval approaches 1000 days.

Peale, S. J.↗

NASA NTRS1997

Electro-Optic Field Sensor

Electrostatic field measurements are fundamental to the study of thunderstorm electrification, thundercloud charge structure, and the determination of the locations and magnitudes of charges deposited by lightning. Such measurements can also be used to warn of impending electrical hazards. In this work effort, we offer an alternate way of detecting atmospheric electric fields. Our approach involves the use of anisotropic electro-optic crystals.

Koshak, W. J.↗

NASA NTRS2002

Lipid Biomarkers for Methanogens in Hypersaline Cyanobacterial Mats for Guerrero Negro, Baja California Sur

Analyses of sediments from the vicinity of active methane seeps have uncovered a particular suite of lipid biomarker patterns that characterize methane consuming archaea and their syntrophic, sulfate reducing partners. These isoprenoid biomarkers, largely identified by their anomalously light carbon isotopic signatures, have been a topic of intense research activity and are recorded in numerous methane-rich environments from Holocene to Cenozoic. This phenomenon has implications for depleted kerogens at 2.7 Ga on early Earth (Hinrichs 2002). In contrast, the lipid biosignatures of methane producing archaea are not readily identified through distinct isotopic labels and have received comparably little attention in analyses of archaea in environmental samples. Indeed, environmental analyses generally detect only free archaeal lipids, not the intact, polar molecules found in the membrane of living organisms. As part of the Ames NAI, the 'Early Microbial Ecosystem Research Group' (EMERG) is working to understand microbial processes in the hypersaline cyanobacterial mats growing in the salt evaporation ponds of the Exportadora de Sal at Guerrero Negro, Baja California Sur, Mexico. The aim of this study was to develop methods by which we could identify the organisms responsible for methane generation in this environment. While the ester-bound fatty acids, hopanoids and wax esters provide a means to identify most of the bacterial components of these mats, the archaea which Ere evidently present through genomic assays and the fact of intense methane production (Hoehler et al. 200l), have not been identified through their corresponding lipid signatures. Archaeal core lipids present a number of analytical challenges. The core lipids of methanogens comprise C20, C40 and sometimes C25 isoprenoid chains, linked through ether bonds to glycerol. As well as archaeal (C20), sn-2- and sn-3-hydroxyarchaeol are associated particularly with methylotrophic methanogens. Recently, we have also identified a dihydroxyarchaeol in a hyperthermophilic methanogen (Summons et al. 2002). Additional structural diversity is encoded into the polar head groups that are attached to the glycerol ether cores. The C20 core lipids are readily analyzed by GC-MS as their volatile trimethylsilyl derivatives while compounds with intact polar head groups can only be detected using LC-MS approaches. Our approach was to utilize the alternative of an ether cleavage reagent (BBr3 vs. HI) and a hydride reducing agent to convert all ether lipids to hydrocarbon in order to provide a vertical profile of quantitative information that might be matched to methane fluxes. We have found that while conventional acid hydrolysis and HI treatment will destroy hydroxyarchaeols, molecular information remains intact through use of BBr3 for ether cleavage. This method revealed the presence of traces of biphytane and various ether alkyls associated with some sulfate reducing bacteria within the mat structure. An interesting, and potentially valuable, byproduct of the method utilizing HI was the identification of abundant homohopanoids after superhydride reduction. Evidently present as sulfur-bound diagenetic products these hopanoids are likely cyanobacterial biomarkers in the early stages of diagenetic preservation.

Jahnke, Linda L.↗

NASA NTRS2003

Monitoring of Observation Errors in the Assimilation of Satellite Ozone Data

The stratospheric ozone layer protects life on Earth from the harmful effects of solar ultravioiet radiation. The ozone layer is currently in a fragile state because of depletion caused by man-made chemicals, especially chlorofluorocarbons. The state of the ozone layer is being monitored and evaluated by scientific experts around the world, in order to help policy makers assess the impacts of international protocols that control the production and release of ozone depleting chemicals. Scientists use a variety ozone measurements and models in order to form a comprehensive picture about the current state of the ozone layer, and to predict the future behavior (expected to be a recovery, as the abundance of the depleting chemicals decreases). Among the data sets used, those from satellite-borne instruments have the advantage of providing a wealth of information about the ozone distribution over most of the globe. Several instruments onboard American and international satellites make measurements of the properties of the atmosphere, from which atmospheric ozone amounts are estimated; long-term measurement programs enable monitoring of trends in ozone. However, the characteristics of satellite instruments change in time. For example, the instrument lenses through which measurements are made may deteriorate over time, or the satellite orbit may drift so that measurements over each location are made later and later in the day. These changes may increase the errors in the retrieved ozone amounts, and degrade the quality of estimated ozone amounts and of their variability. Our work focuses on combining the satellite ozone data with global models that capture atmospheric motion and ozone chemistry, using advanced statistical techniques: this is known as data assimilation. Our method provides a three-dimensional global ozone distribution that is consistent with both the satellite measurements and with our understanding of processes (described in the models) that control ozone distribution. Through the monitoring of statistical properties of the agreement between the data and the model, this approach also enables us to detect changes in the quality of ozone data retrieved from satellite-borne instrument measurements. This paper demonstrates that calculations of the changes in satellite data quality, and the impact these changes on the estimates of the global ozone distribution, can assist in maintaining the uniform quality of the satellite ozone data throughout the lifetime of these instruments, thus contributing to our understanding of long-term ozone change.

Stajner, Ivanka↗

NASA NTRS2010

Random vs. Combinatorial Methods for Discrete Event Simulation of a Grid Computer Network

This study compared random and t-way combinatorial inputs of a network simulator, to determine if these two approaches produce significantly different deadlock detection for varying network configurations. Modeling deadlock detection is important for analyzing configuration changes that could inadvertently degrade network operations, or to determine modifications that could be made by attackers to deliberately induce deadlock. Discrete event simulation of a network may be conducted using random generation, of inputs. In this study, we compare random with combinatorial generation of inputs. Combinatorial (or t-way) testing requires every combination of any t parameter values to be covered by at least one test. Combinatorial methods can be highly effective because empirical data suggest that nearly all failures involve the interaction of a small number of parameters (1 to 6). Thus, for example, if all deadlocks involve at most 5-way interactions between n parameters, then exhaustive testing of all n-way interactions adds no additional information that would not be obtained by testing all 5-way interactions. While the maximum degree of interaction between parameters involved in the deadlocks clearly cannot be known in advance, covering all t-way interactions may be more efficient than using random generation of inputs. In this study we tested this hypothesis for t = 2, 3, and 4 for deadlock detection in a network simulation. Achieving the same degree of coverage provided by 4-way tests would have required approximately 3.2 times as many random tests; thus combinatorial methods were more efficient for detecting deadlocks involving a higher degree of interactions. The paper reviews explanations for these results and implications for modeling and simulation.

Kuhn, D. Richard↗

NASA NTRS2014

Vision Algorithm for the Solar Aspect System of the HEROES Mission

This work covers the design and test of a machine vision algorithm for generating high-accuracy pitch and yaw pointing solutions relative to the sun for the High Energy Replicated Optics to Explore the Sun (HEROES) mission. It describes how images were constructed by focusing an image of the sun onto a plate printed with a pattern of small fiducial markers. Images of this plate were processed in real time to determine relative position of the balloon payload to the sun. The algorithm is broken into four problems: circle detection, fiducial detection, fiducial identification, and image registration. Circle detection is handled by an "Average Intersection" method, fiducial detection by a matched filter approach, identification with an ad-hoc method based on the spacing between fiducials, and image registration with a simple least squares fit. Performance is verified on a combination of artificially generated images, test data recorded on the ground, and images from the 2013 flight

Solar Aspect↗

NASA NTRS2014

Vision Algorithm for the Solar Aspect System of the High Energy Replicated Optics to Explore the Sun Mission

This work covers the design and test of a machine vision algorithm for generating high- accuracy pitch and yaw pointing solutions relative to the sun on a high altitude balloon. It describes how images were constructed by focusing an image of the sun onto a plate printed with a pattern of small cross-shaped fiducial markers. Images of this plate taken with an off-the-shelf camera were processed to determine relative position of the balloon payload to the sun. The algorithm is broken into four problems: circle detection, fiducial detection, fiducial identification, and image registration. Circle detection is handled by an "Average Intersection" method, fiducial detection by a matched filter approach, and identification with an ad-hoc method based on the spacing between fiducials. Performance is verified on real test data where possible, but otherwise uses artificially generated data. Pointing knowledge is ultimately verified to meet the 20 arcsecond requirement.

0000000↗

NASA NTRS2014

Vision Algorithm for the Solar Aspect System of the HEROES Mission

This work covers the design and test of a machine vision algorithm for generating high-accuracy pitch and yaw pointing solutions relative to the sun for the High Energy Replicated Optics to Explore the Sun (HEROES) mission. It describes how images were constructed by focusing an image of the sun onto a plate printed with a pattern of small fiducial markers. Images of this plate were processed in real time to determine relative position of the balloon payload to the sun. The algorithm is broken into four problems: circle detection, fiducial detection, fiducial identification, and image registration. Circle detection is handled by an Average Intersection method, fiducial detection by a matched filter approach, identification with an ad-hoc method based on the spacing between fiducials, and image registration with a simple least squares fit. Performance is verified on a combination of artificially generated images, test data recorded on the ground, and images from the 2013 flight.

HEROES↗

NASA NTRS2013

Characterization and Correction of Aquarius Long Term Calibration Drift Using On-Earth Brightness Temperature Refernces

The Aquarius/SAC-D mission was launched on June 10, 2011 from Vandenberg Air Force Base. Aquarius consists of an L-band radiometer and scatterometer intended to provide global maps of sea surface salinity. One of the main mission objectives is to provide monthly global salinity maps for climate studies of ocean circulation, surface evaporation and precipitation, air/sea interactions and other processes. Therefore, it is critical that any spatial or temporal systematic biases be characterized and corrected. One of the main mission requirements is to measure salinity with an accuracy of 0.2 psu on montly time scales which requires a brightness temperature stability of about 0.1K, which is a challenging requirement for the radiometer. A secondary use of the Aquarius data is for soil moisture applications, which requires brightness temperature stability at the warmer end of the brightness temperature dynamic range. Soon after launch, time variable drifts were observed in the Aquarius data compared to in-situ data from ARGO and models for the ocean surface salinity. These drifts could arise from a number of sources, including the various components of the retrieval algorithm, such as the correction for direct and reflected galactic emission, or from the instrument brightness temperature calibration. If arising from the brightness temperature calibration, they could have gain and offset components. It is critical that the nature of the drifts be understood before a suitable correction can be implemented. This paper describes the approach that was used to detect and characterize the components of the drift that were in the brightness temperature calibration using on-Earth reference targets that were independent of the ocean model.

Aquarius↗

NASA NTRS2019

Radiation Stability Evaluation of Protein-Based Nanopores for Mars and Europa Missions

Exploration of our Solar System has revealed a number of locations that are now habitable or could have supported life in the past. One approach to finding life involves detection of informational polymers like deoxyribonucleic acid (DNA) and ribonucleic acid (RNA) that are definitive biosignatures for life as we know it. Alternatively, structural variants of DNA and RNA, collectively termed xenonucleic acids (XNAs) have been shown in the laboratory to behave similarly. Nanopore-based sequencers differ from traditional sequencing technologies in that they do not explicitly require synthesis of DNA before or during analysis. Because of this, nanopore sequencers have been used for the direct sequencing of RNA, and could be used for the detection and analysis of other charged polymers. Here we describe results of exposing the MinION hardware, flow cells, and key reagents to ionizing radiation at doses relevant to Mars and Europa missions (10 to 3000 silicon-equivalent gray).

Burton, Aaron S.↗

NASA NTRS2019

Star Tracker Accuracy Improvement and Optimization for Attitude Measurement in Three-Axis

High precision attitude measurement systems obviate the need for the beacon from the receiver making it possible for the spacecraft to beam a laser communications signal to a ground station without the ground station advertising its location. The research presented targets new detection and estimation methods to improve the accuracy in locating stars on a focal plane detector, and an understanding of the effects of changes in the optics design parameters and aberration, including defocus, on the navigation solution itself. This understanding can lead to an optimization of the attitude solution with respect to those optics realm parameter changes. The methodology discussed includes the development of a model of a current star tracker system. Using this model, multiple algorithms are implemented, including a multi-hypothesis method (MHT), to detect and estimate the position of the stars on the focal plane detector. It will be shown that using the MHT for detection and estimation, a greater accuracy can be found for each star estimation from more traditional detection and estimation algorithms. The approach then uses the model to develop statistics of the star tracker and the attitude estimation outputs to understand the accuracy, or variance, of the system's attitude solution. This solution is repeated for a range of defocus aberration, and a lower limit to the variance of the attitude solution is shown. A Cramer Rao lower bound solution is derived for the star tracker system and the results are compared to the Monte Carlo analysis from the model and shown to correlate very well. The approach uses a star image not as a Gaussian spot on the focal plane as done in previous work, and use of an image that includes the effects of aberrations of the optic system, and the effects of under-sampling and noise from the focal plane detector as well. Analysis includes exploring a star tracker's accuracy improvement through the combination of focus error and under-sampling effects alone, possibly contradicting conventional wisdom and approaches.

Lichter, Michael J.↗

NASA NTRSDate not supplied

Microscopy Methods for Life Detection on Ocean Worlds

On Earth, light microscopy is commonly used in microbiology to identify organisms and observe their interactions with the environment; this makes it an attractive technique for in situ life detection methods on ocean worlds. As a standalone technique, brightfield microscopy, while able to provide important contextual information, has limited usefulness as a life detection technique because it is often challenging to differentiate between abiotic and biotic particles based solely on their size and shape, which may introduce risks of false positive or false negative interpretations. However, these risks can be reduced by combining brightfield microscopy with fluorescence microscopy to provide a method that correlate sample chemistry with sample morphology. In this work, we have used the Luminescence Imager for Exploration (LIfE), a brightfield and epifluorescence microscope with an integrated sample processing system (matured under the Concepts for Ocean worlds Life Detection Technology and Instrument Concepts of Europa Exploration programs) to develop methods that increase the fidelity of in situ microscopy life detection measurements through two main approaches. First, native fluorescence is excited in molecules that contain aromatic moieties such as proteins (using deep UV excitation), and energy carrying molecules and endogenous chromophores (using visible-light excitation), to correlate the location of these species with cell-like structural features (brightfield imaging). Second, fluorescent stains are used to selectively image cells and cell fragments by targeting proteins, lipids, and nucleic acids. We discuss the results of tests, obtained using ocean world analog samples, that have examined trades associated with implementing these methods autonomously in planetary missions, including the intrinsic properties of candidate fluorescence dyes and long-term storage and radiation stability.

Pavel E. Z. Klier↗

NASA NTRSDate not supplied

Microscopy Methods for Life Detection on Ocean Worlds

On Earth, light microscopy is commonly used in microbiology to identify organisms and observe their interactions with the environment; this makes it an attractive technique for in situ life detection methods on ocean worlds. As a standalone technique, brightfield microscopy, while able to provide important contextual information, has limited usefulness as a life detection technique because it is often challenging to differentiate between abiotic and biotic particles based solely on their size and shape, which may introduce risks of false positive or false negative interpretations. However, these risks can be reduced by combining brightfield microscopy with fluorescence microscopy to provide a method that correlate sample chemistry with sample morphology. In this work, we have used the Luminescence Imager for Exploration (LIfE), a brightfield and epifluorescence microscope with an integrated sample processing system (matured under the Concepts for Ocean worlds Life Detection Technology and Instrument Concepts of Europa Exploration programs) to develop methods that increase the fidelity of in situ microscopy life detection measurements through two main approaches. First, native fluorescence is excited in molecules that contain aromatic moieties such as proteins (using deep UV excitation), and energy carrying molecules and endogenous chromophores (using visible-light excitation), to correlate the location of these species with cell-like structural features (brightfield imaging). Second, fluorescent stains are used to selectively image cells and cell fragments by targeting proteins, lipids, and nucleic acids. We discuss the results of tests, obtained using ocean world analog samples, that have examined trades associated with implementing these methods autonomously in planetary missions, including the intrinsic properties of candidate fluorescence dyes and long-term storage and radiation stability.

Pavel E Z Klier↗

NASA NTRSDate not supplied

Shock Capturing via Limiting for High-Order Methods including Discontinuous Galerkin

High-order methods, such as discontinuous Galerkin (DG), spectral, and flux reconstruction (FR), are prone to generating unwanted oscillations near shocks and discontinuities. Conventional limiting techniques, while effective in suppressing oscillations near shocks, often compromise accuracy near extrema, where the solution is only first-order accurate. This paper introduces a novel limiting technique for these high-order schemes, aimed at effectively managing shocks while preserving accuracy. The key idea is to expand the standard monotonicity limits to provide “room” near smooth extrema, ensuring that limiting has no effect and thus preserving accuracy. Near a discontinuity, these expanded limits effectively reduce to the original monotonicity limits, suppressing oscillations. Additional motivation is drawn from a formula for the derivative of Radau polynomials, which depicts the behavior of oscillations resulting from discontinuities. This behavior leads to a simplification by applying the limits to the sum of magnitudes of all modes, linear and higher degree. Unlike typical approaches, which rely on successful detection to activate limiting, our limiter depends continuously on the data, there by avoiding potential issues if detection fails. To reduce computing time, efficient criteria for detecting smooth regions where limiting is unnecessary are presented. Combined with detection, the continuous dependence on the data is lost, but the method is more economical. A notable characteristic of the entire process is its simplicity in both concept and implementation. Numerical tests for advection and Euler equations are conducted to demonstrate the effectiveness of the proposed method.

numerical methods↗

NASA NTRSDate not supplied

Shock Capturing via Limiting for High-Order Methods including Discontinuous Galerkin

High-order methods, such as discontinuous Galerkin (DG), spectral, and flux reconstruction (FR), are prone to generating unwanted oscillations near shocks and discontinuities. Conventional limiting techniques, while effective in suppressing oscillations near shocks, often compromise accuracy near extrema, where the solution is only first-order accurate. This paper introduces a novel limiting technique for these high-order schemes, aimed at effectively managing shocks while preserving accuracy. The key idea is to expand the standard monotonicity limits to provide “room” near smooth extrema, ensuring that limiting has no effect and thus preserving accuracy. Near a discontinuity, these expanded limits effectively reduce to the original monotonicity limits, suppressing oscillations. Additional motivation is drawn from a formula for the derivative of Radau polynomials, which depicts the behavior of oscillations resulting from discontinuities. This behavior leads to a simplification by applying the limits to the sum of magnitudes of all modes, linear and higher degree. Unlike typical approaches, which rely on successful detection to activate limiting, our limiter depends continuously on the data, there by avoiding potential issues if detection fails. To reduce computing time, efficient criteria for detecting smooth regions where limiting is unnecessary are presented. Combined with detection, the continuous dependence on the data is lost, but the method is more economical. A notable characteristic of the entire process is its simplicity in both concept and implementation. Numerical tests for advection and Euler equations are conducted to demonstrate the effectiveness of the proposed method.

numerical methods↗