HPC‐enabled Geometry‐compliant Lattice Structures for 3D Printing and Structural Simulation
Explore the source record for details and available documents.
42 ENGINEERING↗
SEARCH · Search NASA
Results for “Finite Element Simulation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Crystal plasticity model of residual stress in additive manufacturing using the element elimination and reactivation method
Selective laser melting is receiving increasing interest as an additive manufacturing technique. Residual stresses induced by the large temperature gradients and inhomogeneous cooling process can favour the generation of cracks. In this work, a crystal plasticity finite element model is developed to simulate the formation of residual stresses and to understand the correlation between plastic deformation, grain orientation and residual stresses in the additive manufacturing process. The temperature profile and grain structure from thermal-fluid flow and grain growth simulations are implemented into the crystal plasticity model. An element elimination and reactivation method is proposed to model the melting and solidification and to reinitialize state variables, such as the plastic deformation, in the reactivated elements. The accuracy of this method is judged against previous method based on the stiffness degradation of liquid regions by comparing the plastic deformation as a function of time induced by thermal stresses. The method is used to investigate residual stresses parallel and perpendicular to the laser scan direction, and the correlation with the maximum Schmid factor of the grains along those directions. The magnitude of the residual stress can be predicted as a function of the depth, grain orientation and position with respect to the molten pool. The simulation results are directly comparable to X-ray diffraction experiments and stress–strain curves.
316 stainless steel↗
Illumination-induced modulation of conductivity and Gunn oscillation properties in epitaxial GaAs
In this work, we illuminate a gallium arsenide (GaAs) Gunn device and study the light-induced changes of Gunn oscillation properties. We observe that illumination leads to the modulation of the Gunn threshold voltage, the Gunn oscillation magnitude, and the coherency of Gunn oscillation, with the nature of the modulation being closely related to the position of illumination on the device. These effects are attributed to the generation of optically excited carriers, which results in the modulation of conductivity and the electric field profile along the device. The finite element method is used to simulate the change of the field profile of the Gunn device caused by illumination. We also report an unexpected phenomenon of Gunn oscillation property manipulation with an optical chopper. In addition, wavelength-dependent, power-dependent, and pulsed illumination measurements are performed to help with further understanding the observations.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
SULI Intern Final Report: Computationally Investigating Hydrogen Thermo-Diffusion in Yttrium Hydride Using Multiscale Methods
The renaissance of nuclear energy has arrived, heralding an age of abundant inexpensive clean energy, and renewed space exploration. In nuclear-powered spacecraft and microreactors, safety and size are of utmost importance. Yttrium Hydride (YHx) is being researched for its utility as a neutron moderator in nuclear reactors; the hydrogen in YHx slows down neutrons, enabling a continuous nuclear reaction in the reactor. This has the benefit of allowing reactors to be more safe, compact, and efficient. The goal of this effort is to computationally predict the coefficient of temperature-dependent hydrogen diffusion within YHx, the Soret coefficient. This parameter is essential for determining the safe operating modes of YHx moderators. Zirconium Hydride (ZrHx) is used in the Training, Research, Isotopes, General Atomics (TRIGA) reactor, is the reference material for these calculations. In this work, nanoscale atomic modeling in the Vienna Ab initio Simulation Package (VASP) is combined with the mesoscale finite element phase-field module in the Multiphysics Object-Oriented Simulation Environment (MOOSE); this culminates in a new multiscale computational method to simulate Soret diffusion of hydrogen in YHx. This data is useful for predicting experimental outcomes. This workflow involves convergence testing followed by static, Nudged Elastic Band (NEB), Quasi-Harmonic Approximation (QHA), and Molecular Dynamics (MD) calculations - linked with phase field simulation. NEB simulates hydrogen migration, while QHA and MD predict temperature-dependent properties. The static calculations align with literature, and preliminary NEB and QHA calculations yield accurate results. Once the atomic calculations are complete, we will incorporate Electron Backscatter Diffraction (EBSD) images and VASP-generated parameters into the phase field module to simulate intra- and intergranular transport of hydrogen in ZrHx and YHx. Future research will extend our approach to fuel-moderator materials systems such as Uranium-Yttrium Hydride (U-YHx). This work contributes to the development of advanced nuclear energy solutions for space travel.
36 - MATERIALS SCIENCE↗
Integrated Simulation of Weld Residual Stress Evolution and Crack Propagation Using XFEM
Nuclear power plant components operate in environments that promote multiple degradation mecha- nisms, several of which involve crack initiation and growth. An ongoing effort in the U.S. Department of Energy’s Nuclear Energy Advanced Modeling and Simulation (NEAMS) program is developing a general capability within the Multiphysics Object Oriented Simulation Environment (MOOSE) framework for simulating three-dimensional crack growth under a range of driving conditions, including fatigue, stress corrosion cracking (SCC), brittle fracture, and stress-relaxation cracking. This report demonstrates an end-to-end workflow that uses this capability to model weld-residual-stress-driven SCC in the J-groove weld of a pressurized-water reactor control rod drive mechanism penetration in the vessel head. The workflow consists of a thermomechanical welding simulation with temperature-dependent plasticity, followed by cooldown to ambient conditions, and a restart of the simulation using the MOOSE extended finite element method (XFEM) module to propagate a three-dimensional crack through the residual stress field. New welding capabilities were developed to properly initialize newly activated elements in the weld region, and robustness improvements were made to the mesh-based algorithm for defining cutting planes in the 3D XFEM algorithm, allowing it to handle complex crack fronts and stress fields. Together these advances allowed the simulated SCC crack to grow from an initial elliptical flaw in the weld, across the weld, through the tube wall, and almost to the triple point (where the weld, tube, and reactor pressure vessel head intersect) over roughly 36 years of simulated service. These results demonstrate a workflow that can be extended to fully three-dimensional welding simulations and more complex crack interaction problems.
42 - ENGINEERING↗
Development of Graphite Thermal and Mechanical Modeling Capabilities in Grizzly
Nuclear-grade graphites are used extensively in the core designs of multiple types of advanced nuclear reactors. In the reactor environment, graphite is exposed over long durations to extreme conditions, including high temperatures, radiation and potentially molten salt and oxygen. Exposure to these conditions can cause several degradation mechanisms in graphite, including nonuniform volumetric strains induced by irradiation and thermal expansion, which lead to stresses that can compromise the performance of graphite components. Evaluating component integrity, predicting component performance over the reactor lifetime, and developing design standards all require robust tools for predicting fracture initiation and propagation in graphite structural components in nuclear reactors. This report documents progress in an ongoing effort to develop modeling and simulation tools in the Grizzly code for predicting the performance of graphite exposed to reactor conditions. Recent developments include a set of thermal and mechanical models that now include the IG-110, NBG-18, and H-451 graphite grades. Improvements have also been made to a nonlinear damaged plasticity model applicable to predicting damage under tension and compression to quasibrittle materials, including graphite. In addition, enhancements have been made to the extended finite element method implementation targeted at simulating graphite fracture. These include new capabilities for crack nucleation in the interior of a solid body, improved treatment of crack nucleation on free surfaces, and more robust modeling approaches for crack growth approaching free surfaces or other cracks.
36 MATERIALS SCIENCE↗
TReactMech v4.217
TReactMech couples geomechanical processes (poroelasticity, failure, and inelastic strain) with multiphase nonisothermal flow (derived from TOUGH2) and reactive geochemical transport. At its core is the reactive-transport code TOUGHREACT v4.13. TReactMech is an efficient hybrid parallel simulator, solving the geomechanics using finite elements and MPI/PetSc, the multiphase flow using integrated finite difference and MPI/PETSc, and the reactive chemistry using OpenMP. The advantages of TReactMech are in its multiphase flow capabilities (e.g., supercritical CO2, supercritical water, air) and parallel geomechanics including full 3-D stress tensor, shear and tensile failure, coupled to porosity and permeability changes. It is backwardly compatible with TOUGH2 and TOUGHREACT v4.13, allowing for easier transitions between the codes. TReactMech can be used to simulate many natural and engineered subsurface systems, including geothermal reservoirs, borehole heat exchangers, geologic carbon sequestration, geologic storage of nuclear waste, groundwater resources, weathering, sediment diagenesis, seafloor hydrothermal circulation, hydrofracturing in unconventional reservoirs, and injection/production-induced surface deformation.
Sonnenthal, Eric↗
Finite Element Analysis of the TRUST Nonlinear Dynamics Testbed
This paper builds on prior work conducted within the Los Alamos National Laboratory (LANL) Testbeds to Reduce Uncertainty in Simulations and Tests (TRUST) program. Specifically, it builds on finite element (FE) modeling efforts for the TRUST program’s Nonlinear Dynamics (ND) testbed. Historically, the FE model for the ND testbed has exclusively utilized a Lanczos eigensolver that linearly extracts the system’s natural frequencies. This paper investigates the Abaqus 2024’s explicit dynamic solver, which implements a central difference explicit solver. The central difference method used in Abaqus can capture nonlinear material responses in structural dynamic simulations making it suitable for the ND FE model.
42 ENGINEERING↗
Finite Element Analysis and Machine Learning Guided Design of Carbon Fiber Organosheet-Based Battery Enclosures for Crashworthiness
Carbon fiber composite can be a potential candidate for replacing metal-based battery enclosures of current electric vehicles (E.V.s) owing to its better strength-to-weight ratio and corrosion resistance. However, the strength of carbon fiber-based structures depends on several parameters that should be carefully chosen. Here, in this work, we implemented high throughput finite element analysis (FEA) based thermoforming simulation to virtually manufacture the battery enclosure using different design and processing parameters. Subsequently, we performed virtual crash simulations to mimic a side pole crash to evaluate the crashworthiness of the battery enclosures. This high throughput crash simulation dataset was utilized to build predictive models to understand the crashworthiness of an unknown set. Our machine learning (ML) models showed excellent performance (R 2 > 0.97) in predicting the crashworthiness metrics, i.e., crush load efficiency, absorbed energy, intrusion, and maximum deceleration during a crash. We believe that this FEA-ML work framework will be helpful in down select process parameters for carbon fiber-based component design and can be transferrable to other manufacturing technologies.
36 MATERIALS SCIENCE↗
Enabling the Broader use of MOOSE for Nuclear Energy and Other Simulation
Explore the source record for details and available documents.
42 ENGINEERING↗
Simulations of SITI Cookoff Experiments Carried Out with Different Lots of PBX 9502
A pressure dependent cookoff model for PBX 9502 was developed by Hobbs’ et. al. PBX 9502 is composed of 95% by mass triaminotrinitrobenzene (TATB) and a 5% by mass chlorotrifluoroethylene/vinylidine fluoride binder. The objective in this study is to implement this cookoff model in Aria to simulate Sandia Instrumented Thermal Ignition (SITI) experiments that were carried out with different manufacturing lots of PBX 9502. The SITI design consists of solid cylinders (1" diameter × 1" height) of insensitive high explosive (IHE) confined by a cylindrical aluminum case. An electric heater is wrapped around the lateral surface of the case. This heater produces a temperature heating ramp on the outer surface of the case. Internal thermocouples measure the IHE temperature rise from the center to locations close to the IHE-aluminum interface. The energetic material is heated until thermal ignition occurs. Pressure is measured with a static pressure transducer installed on top of the confinement case. Two–dimensional axisymmetric heat conduction finite element models were implemented to simulate these experiments using four options of the PBX 9502 cookoff model. In addition, the predictive ability of this thermal decomposition model is evaluated using Latin Hypercube Sampling (LHS) techniques.
42 ENGINEERING↗
Tusas: A fully implicit parallel approach for coupled phase-field equations
In this study, we develop a fully-coupled, fully-implicit approach for phase-field modeling of solidification in metals and alloys. Predictive simulation of solidification in pure metals and metal alloys remains a significant challenge in the field of materials science, as microstructure formation during the solidification process plays a critical role in the properties and performance of the solid material. Our simulation approach consists of a finite element spatial discretization of the fully-coupled nonlinear system of partial differential equations at the microscale, which is treated implicitly in time with a preconditioned Jacobian-free Newton-Krylov method. The approach is algorithmically scalable as well as efficient due to an effective preconditioning strategy based on algebraic multigrid and block factorization. We implement this approach in the open-source Tusas framework, which is a general, flexible tool developed in C++ for solving coupled systems of nonlinear partial differential equations. The performance of our approach is analyzed in terms of algorithmic scalability and efficiency, while the computational performance of Tusas is presented in terms of parallel scalability and efficiency on emerging heterogeneous architectures. We demonstrate that modern algorithms, discretizations, and computational science, and heterogeneous hardware provide a robust route for predictive phase-field simulation of microstructure evolution during additive manufacturing.
97 MATHEMATICS AND COMPUTING↗
NEAMS-Multiphysics MOOSE End Year Framework Activities FY20
The Multiphysics Object Oriented Simulation Environment (MOOSE) is a general finite element package meant for high performance solution of multiphysics problems in science and engineering. In this report, we present additions and enhancements to MOOSE funded by the Nuclear Engineering Advanced Modeling and Simulation (NEAMS) program. NEAMS-funded MOOSE framework library improvements include: expansion of support for multi-level multi-application restart; enhancement of coupling between native MOOSE applications and external libraries; addition of a sparse automatic differentiation (AD) container enabling non-local degree of freedom coupling; block-specific quadrature rules; further development of an eigenvalue executioner; faster setup of periodic boundary conditions; and creation of a mesh meta-data system streamlining simulation startup. Besides developing the framework library, NEAMS funds were used to overhaul a swath of important MOOSE infrastructure in order to substantially improve user experience. These critical infrastructure changes included adapting MOOSE to python 3, improving the test harness to catch race conditions, and most importantly transitioning MOOSE to use Conda, a globally known packaging system, that greatly eases software adoption.
97 MATHEMATICS AND COMPUTING↗
Effect of heat treatment on microstructural evolution and hardness homogeneity in laser powder bed fusion of alloy 718
The thermal history developed in laser powder bed fusion (LPBF) processes has been shown to be complex resulting in equally complex microstructures and mechanical properties. Microscopic observations and Vickers micro-hardness mapping measurements were carried out on diff ;erent section planes of LPBF alloy 718 cuboids. Three-dimensional finite element analysis was used to simulate thermal history and to predict the residual stress distribution in the as-built material. Computational thermodynamics was used to predict the micro-segregation and nucleation driving force of various phases in the bulk and in segregated regions. Varied heat-treatments such as simulated hot isostatic pressing, and double aging were applied. Their influence on the microstructure, microsegregation, precipitate formation, and micro-hardness variations of LPBF alloy 718 were investigated. Hardness map results showed heterogeneous micro-hardness on the xy- and xz-planes of the as-built parts where the bottom plane and center regions had larger hardness of ~315 HV 0.5 while the top plane and contours showed hardness of ~300 HV 0.5 . It was found that the aging treatment increased the overall hardness of the as-built condition from ~310 HV 0.5 to 470 HV 0.5 but also increased the hardness gradient throughout the coupon. After simulated hot isostatic pressing process (i.e., without applied pressure) at 1020 °C for 4 h followed by water quench (HIPWQ), the hardness gradient and hardness was minimized (~210 HV 0.5 ) as the microstructure transitioned from heterogeneous columnar grains in the as-built condition to more uniform recrystallized grains. A double aging treatment was applied to enhance hardness from ~210 HV 0.5 to ~440 HV 0.5 . Finally, HIPWQ followed by double aging produced a homogeneous microstructure and more uniform hardness map with enhanced mechanical properties in LPBF alloy 718 coupons.
36 MATERIALS SCIENCE↗
On the roles of welding residual stresses in determination of fracture toughness in austenitic stainless steel SUS 304 pipeline girth welds
Welding residual stresses especially the high tensile stresses are proved to have negative impacts on the fatigue and fracture behaviors of welded structures. In this study, a virtual fabrication of test specimens from welding process to specimen preparation was carried out by numerical simulation. An austenitic stainless steel multi-pass pipe welding was simulated by transient thermal–mechanical finite element analysis, the residual stresses were then mapped into the test specimen to evaluate fracture toughness. The findings in this study confirmed that, residual stress can be high in a sub-sized compact tensile specimen, which may accelerate or hinder the crack propagation during actual fatigue and fracture tests as reported in recent years. The influence of the cutting location and orientation of the specimen on fracture performance was investigated systematically to provide a fundamental understanding of welding residual stress and necessary insights into the specimen preparation procedure. Considering the limitation of measuring techniques and the complexity of the stress distribution, the developed numerical model can be a very useful tool to elucidate the stress evolution and quantify the effect of remaining welding stress on fracture toughness.
Fracture behavior↗
Parametric study of residual stress formation in Wire and Arc Additive Manufacturing
Here, a finite element model was created to simulate the Wire Arc Additive Manufacturing (WAAM) thermal and mechanical processes of Inconel 718 on a A36 steel substrate, as well as the effects of process parameters on Residual Stress (RS). The model was verified using temperature data obtained from three thermocouples attached to the upper surface of the build substrate and micro-strain measurements obtained from Neutron Diffraction (ND) measurement. The model was then used to study the effects of changing the torch travel speed and interlayer dwell time. The study found that travel speed has little effect on RS when maintaining the same heat input rate. As well, the interlayer dwell time has a strong effect on RS. Reducing the dwell time causes the stress profiles to become relatively uniform and a high-stress region extends deeper along the build direction. This study provides important insight into mechanical stresses inside large walls made by the WAAM method.
36 MATERIALS SCIENCE↗
Insight into the deformation features and capacity loss mechanisms of lithium-ion pouch cells under spherical indentation conditions
Mechanical deformation under extreme conditions is one of the important reasons for the failure of lithium-ion batteries in automotive application. However, the deformation features and component failure of lithium-ion cells to external loading has never been a design consideration. Here, in this study, we conduct spherical indentation tests on a dozen of lithium-ion cells with different capacities under different control mode conditions to investigate their deformation features and capacity loss mechanisms. The experimental results show that, under mechanical deformation conditions, internal faults of cells occur in stages, and energy accumulation and sudden release are two key processes of cell's mechanical failure. The cells' state of charge is the main factor affecting their thermal runaway behaviors. In addition, a finite element model is developed to simulate the deformation features and the failure mechanism of key components of lithium-ion pouch cells; the 3D x-ray computed tomography is employed to demonstrate its internal configuration. With this model, the force-strain response, the deformation features as well as the size of the failure area of lithium-ion cells under spherical indentation conditions are accurately predicted. In 3D x-ray computed tomography images, unique mud cracks in cooper current collector are observed, and the influence mechanisms of the isolated fragments on the cell capacities are revealed. These results may provide useful information for the mechanical structure design of the components of lithium-ion pouch cells.
25 ENERGY STORAGE↗
Modeling the interfacial failure and resulting mechanical properties of z-pinned additively manufactured composites
The mechanical properties of Fused Filament Fabrication (FFF) parts are limited in the build direction, albeit advantages such as design flexibility and in-house customization. Here, in this paper, a novel z-pinning approach that enhances mechanical properties in the build direction by depositing material across multiple layers within the part was investigated through numerical simulations and validated experimentally. A finite element model for z-pinned composite structures was developed by assigning fiber-orientation dependent material properties obtained using a micromechanics approach to beads and pins. The bead-to-bead and pin-to-pin adhesions within the z-pinned structures were modeled using a cohesive traction separation law. The properties of cohesive elements for carbon fiber-reinforced polylactic acid (CF-PLA) z-pinned composites were calibrated using tensile experiments. The elastic modulus and tensile strength of CF-PLA z-pinned composites in the build direction were predicted with the developed numerical model. The numerical investigation on various geometrical parameters revealed that the largest pin volume increases the stiffness and tensile strength by 40% and thus, has the greatest influence on the mechanical properties of the z-pinned composites. The effect of z-pin geometrical parameters on the mechanical properties was summarized to aid in the design of z-pinned additively manufactured composite structures.
36 MATERIALS SCIENCE↗