Search NASA⌕ Search

SEARCH · Search NASA

Results for “SiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Selective propane dehydrogenation with single-site Co II on SiO 2 by a non-redox mechanism

We report the synthesis, characterization, and catalytic performance for gas phase propane dehydrogenation of single-site Co2+ ions supported on silica. Spectroscopic characterization by resonance Raman, electron paramagnetic resonance, and X-ray near-edge and extended absorption fine structure revealed that tetrahedrally coordinated Co2+ ions are chemisorbed into the trisiloxane rings on the surface of amorphous silica. In situ XAS shows that Co is not oxidized by air nor reduced by hydrogen even at 650 degrees C. For catalytic propane dehydrogenation, single-site Co2+/SiO2 exhibits selectivities >95% at 550 degrees C and >90% at 650 degrees C with stable activity over 24 h. Calculations with hybrid density functional theory support a non-redox mechanism for activation of C-H and H-H bonds by Co2+ similar to that previously reported for single-site Zn2+/SiO2.

Dehydrogenation↗

Interfacial study of the role of SiO 2 on Si anodes using electrochemical quartz crystal microbalance

One of the challenges associated with silicon as an anode material for Li-ion batteries is the formation of an unstable solid-electrolyte interphase which, forms continuously while consuming lithium and other components; and consequently contributes to irreversible capacity. To elucidate some of the details of the formation and subsequent dissolution of species formed during lithiation of silicon anodes we have produced thin film silicon electrodes and analyzed them during lithiation and delithiation using an electrochemical quartz microbalance with in-situ dissipation (EQCM-D). Measurements were conducted on electrodes with silicon alone and silicon with a silicon dioxide coating, and in EC:EMC and EC:DEC:FEC based electrolytes. Mass loss during lithiation was observed in both solvents systems when an oxide layer was present on the surface of the electrode. Solid state and solution NMR measurements indicate that the formation and dissolution of Li2O is the most likely cause of mass loss.

Anodes↗

Saturation curve of SiO{sub 2} component in rutile-type GeO{sub 2}: A recoverable high-temperature pressure standard from 3 GPa to 10 GPa

The accuracy and precision of pressure measurements and the pursuit of reliable and readily available pressure scales at simultaneous high temperatures and pressures are still topics in development in high pressure research despite many years of work. In situ pressure scales based on x-ray diffraction are widely used but require x-ray access, which is lacking outside of x-ray beam lines. Other methods such as fixed points require several experiments to bracket a pressure calibration point. In this study, a recoverable high-temperature pressure gauge for pressures ranging from 3 GPa to 10 GPa is presented. The gauge is based on the pressure-dependent solubility of an SiO{sub 2} component in the rutile-structured phase of GeO{sub 2} (argutite), and is valid when the argutite solid solution coexists with coesite. The solid solution varies strongly in composition, mainly in pressure but also somewhat in temperature, and the compositional variations are easily detected by x-ray diffraction of the recovered products because of significant changes in the lattice parameters. The solid solution is measured here on two isotherms, one at 1200 °C and the other at 1500 °C, and is developed as a pressure gauge by calibrating it against three fixed points for each temperature and against the lattice parameter of MgO measured in situ at a total of three additional points. A somewhat detailed thermodynamic analysis is then presented that allows the pressure gauge to be used at other temperatures. This provides a way to accurately and reproducibly evaluate the pressure in high pressure experiments and applications in this pressure-temperature range, and could potentially be used as a benchmark to compare various other pressure scales under high temperature conditions. - Graphical abstract: The saturation curve of SiO{sub 2} in TiO{sub 2} shows a strong pressure dependence and a strong dependence of unit cell volume on composition. This provides an opportunity to use this saturation curve as a measurement of pressure during a high-pressure experiment. The curve is a sensitive measure of pressure from 3 GPa to 10 GPa at high temperatures. The pressure is derived from lattice parameter measurements on the recovered solid solution, meaning that in-situ measurements are not necessary to evaluate the pressure of the experiment. - Highlights: • The unit cell of a saturated GeO{sub 2}–SiO{sub 2} solid solution is used as a pressure sensor. • We measure nine bracketed pressure points on the GeO{sub 2}–SiO{sub 2} saturation surface. • We provide a pressure calibrant from 3 GPa to 10 GPa at two temperatures. • Four points are measured at 1200 °C and five points at 1500 °C. • A thermodynamic model is developed for use of the calibrant at other temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Micro- and macro-scale characterization of nano-SiO2 reinforced alkali activated slag composites

Highlights: • Combined advanced micro-scale measurements were used to predict properties of NS AASC. • NS enhances both the macro- and micro-mechanical properties of AASC. • Combination of MIP and XCT facilitates a complete characterization of pore structure. • Combined tools at multi-scale provide efficient approaches to optimize material design. - Abstract: The effect of nano-SiO{sub 2} on the micromechanical properties and microstructure of alkali-activated slag cement (AASC) composites was investigated. The investigation involved the use of: (i) nanoindentation to determine the elastic properties of the constituent phases using statistical deconvolution; (ii) scanning electron microscopy equipped with energy-dispersive X-ray spectroscopy and backscattered electrons to identify and characterize the solid phases in the microstructure; and (iii) X-ray computed tomography microscopy to determine the morphology of microscale pores and mercury intrusion porosimetry to measure the volume fraction of the nanoscale pores. The combined use of micro- and macro-scale characterization tools can establish a logical link between the macro-mechanics, microstructure, and micromechanical properties, which provides valuable information aiding the material design of AASC with nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Rapid preparation of TiO2-SiO2 heterostructure photonic crystal in the near-infrared region via a modified electrophoresis-assisted self-assembly process

Highlights: • TiO{sub 2}-SiO{sub 2} heterostructure photonic crystal was rapidly fabricated. • The voltage played an important role in the electrophoresis-assisted self-assembly. • The photonic band gap of photonic crystal was in the near-infrared region. • The drawing process can accelerate the speed of self-assembling. - Abstract: TiO{sub 2}-SiO{sub 2} heterostructure photonic crystal was rapidly fabricated by a modified electrophoresis-assisted self-assembly process. The effect of voltage on preparation and properties of TiO{sub 2}-SiO{sub 2} heterostructure photonic crystal was discussed. The results of the tests show that TiO{sub 2}-SiO{sub 2} heterostructure photonic crystal with different structures can be rapidly fabricated by controlling the voltage. With the increase of voltage, the TiO{sub 2}-SiO{sub 2} heterostructure photonic crystal is more likely to form an ordered hexagonal array and shows a more bright and uniform color. Meanwhile, the central wavelength of the photonic band gap will be blue shifted in the near-infrared region.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Photocatalytic activities and chemically-bonded mechanism of SiO2@ TiO2 nanocomposites coated cement-based materials

Highlights: • Two samples have different deposited density of TiO{sub 2} nanoparticles on each SiO{sub 2} nanosphere, which depend on the difference of the water dosage. • When the curing time is 28 days, water adsorption rates of mortar-2 at 270 min have decreased by 17.8%, which may be attributed to pozzolanic reactivity of SiO{sub 2} on cement-based materials. • The formation of C-S-H gels via pozzolanic reaction of SiO{sub 2} on cement-based materials has been demonstrated by XPS and NMR spectra. • Cem-1 and cem-2 show excellent photocatalytic property. - Abstract: Photocatalytic technology has been studied in building materials, especially for the surface. However, the drawback of surface-treatment application is weak adhesion between coatings and the substrates resulting poor durability in outdoor environments. In the study, two SiO{sub 2}@TiO{sub 2} core-shell nanocomposites were synthetized and coated cement-based materials, and the photocatalytic activity (rhodamine B removal efficiency) and surface modification/densification performances of coated cement-based materials were studied. The two samples have different deposited densities of TiO{sub 2} nanoparticles on each SiO{sub 2} nanosphere. Water adsorption rates of coated mortar measured at 270 min decreased by 17.8% when curing time was 28 days. Reaction experiments of SiO{sub 2}@TiO{sub 2} nanocomposites and Ca(OH){sub 2} with different dosages were carried out to investigate the reaction mechanism. The formation of C-S-H gel was confirmed due to the pozzolanic reaction of samples and Ca(OH){sub 2}. The coated cement pastes show excellent photocatalytic activity for rhodamine B removal.

36 MATERIALS SCIENCE↗

Efficient 2.0 μm emission in Nd3+/Ho3+ co-doped SiO2-Al2O3-Na2CO3-SrF2-CaF2 glasses for mid-infrared laser applications

Highlights: • The Ho{sup 3+} and Nd{sup 3+}/Ho{sup 3+} co-doped glasses were prepared by melt quenching method. • Nd{sup 3+} ions act as a good sensitizer for getting intense emission around at ∼2.0 μm. • The (σ{sup M}{sub emi}) emission cross-section has been found to be 3.85 × 10{sup −21} cm{sup 2}. • The energy transfer efficiency has been reached 50% from Nd{sup 3+} to Ho{sup 3+} ions. • The present glasses could be potential medium for ∼2.0 μm mid-infrared applications. - Abstract: Nd{sup 3+}/Ho{sup 3+} co-doped SiO{sub 2}-Al{sub 2}O{sub 3}-Na{sub 2}CO{sub 3}-SrF{sub 2}-CaF{sub 2}-Ho{sub 2}O{sub 3}-Nd{sub 2}O{sub 3} oxyfluorosilicate glasses have been prepared by high temperature melt-quenching method. The co-doped samples exhibit fluorescence bands centered at 892, 1058, 1330 nm and 2.0 μm under the excitation of 808 nm laser diode (LD). The energy transfer mechanism between Nd{sup 3+} and Ho{sup 3+} was analyzed based on the absorption, emission and the energy level structures of Nd{sup 3+} and Ho{sup 3+} ions. In the present investigation, the energy transfer efficiency from Nd{sup 3+} to Ho{sup 3+} reached ∼50% under the excitation of 808 nm. This result indicates that Nd{sup 3+} ions can be potentially used as sensitizers for Ho{sup 3+} ions to stimulate the NIR emissions. Stimulated emission cross-section was evaluated for the prominent {sup 5}I{sub 7} → {sup 5}I{sub 8} transition of Ho{sup 3+} ion by using the Mc-Cumber theory. The spectroscopic characteristics of Nd{sup 3+}/Ho{sup 3+} co-doped oxyfluorosilicate glasses are found to be suitable as optical medium for mid infrared emission at ∼2.0 μm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation and up-conversion luminescence of Tb3+/Yb3+ co-doped BaO-WO3-SiO2 glass ceramic

Highlights: • The Tb{sup 3+}/Yb{sup 3+} co-doped glass ceramics containing BaWO{sub 4} is prepared. • The optimum heat treatment schedules is obtained. • The up conversion luminescence mechanism is investigated. - Abstract: The Tb{sup 3+}/Yb{sup 3+} co-doped BaO-WO{sub 3}-SiO{sub 2} glass ceramic is prepared by melt crystallization method. The optimum heat treatment schedule is determined on basis of differential scanning calorimetry. The crystal phase is BaWO{sub 4} by X-ray diffraction analysis. The crystal grain sizes are examined by scanning electron microscope and crystal grain sizes increase with the increasing of heat treatment time. In the visible region, the transmittance of glass ceramic is 79%. The up-conversion fluorescence intensity increase with the increasing of heat treatment time up to 90 min and with the increasing of Yb{sup 3+} concentration up to 0.3 mol%. The possible mechanism of up-conversion in Tb{sup 3+}/Yb{sup 3+} co-doped BaWO{sub 4} glass ceramic is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SiO2-TiO2 doped with Er3+/Yb3+/Eu3+ photoluminescent material: A spectroscopy and structural study about potential application for improvement of the efficiency on solar cells

Highlights: • Intense downconversion emission of Eu{sup 3+} under Uv excitation. • Upconversion emission assigned to the Er{sup 3+}/Yb{sup 3+} under 980 laser pump. • Double excitation simultaneous providing emission in visible range. • Potential application on improvement of solar cells. - Abstract: The various synthesis conditions to obtain a material based on SiO{sub 2}-TiO{sub 2} co-doped with Er{sup 3+}/Yb{sup 3+}/Eu{sup 3+} were investigated, searching for those that present the greatest potential to improve the efficiency of solar cells. Conditions adjusted included heat-treatment temperatures, concentrations of matrix, and concentrations of dopants. Raman spectroscopy results demonstrated the effect of the annealing temperatures on the TiO{sub 2} phase transition and the crystalline phase of the materials, which interfere with the photoluminescence of the materials. The band gap of the materials was evaluated by diffuse reflectance and it decreased due to the doping. The materials were able to absorb UV and IR energy and emit in the visible region, verified by the down conversion, up conversion and the double excitation of the materials. The results showed that the materials may be used as a strategy to use a greater portion of the solar spectrum, improving solar cell efficiency.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Recyclable magnetic Fe3O4@SiO2/β-NaYF4:Yb3+,Tm3+/TiO2 composites with NIR enhanced photocatalytic activity

Highlights: • Fe{sub 3}O{sub 4}@SiO{sub 2}/β-NaYF{sub 4}:Yb{sup 3+},Tm{sup 3+}/TiO{sub 2} composites have been successfully fabricated. • The upconversion of energy transfer from β-NaYF{sub 4}:Yb{sup 3+},Tm{sup 3+} to TiO{sub 2} was confirmed. • Fe{sub 3}O{sub 4}@SiO{sub 2}/β-NaYF{sub 4}:Yb{sup 3+},Tm{sup 3+}/TiO{sub 2} composites exhibit photocatalytic activity in NIR. • The composites can be easily magnetic separated from water after application. • The composites show good stability indicated from four recycled tests. - Abstract: To extend the activities of TiO{sub 2} to the near infrared (NIR) region and to separate and recycle photocatalysts easily is vital for the high harvest of solar energy for sustainable society. The magnetic NIR activated Fe{sub 3}O{sub 4}@SiO{sub 2}/β-NaYF{sub 4}:Yb{sup 3+},Tm{sup 3+}/TiO{sub 2} (FS/UC/T) composites have been synthesized by using the solvothermal method by adding Fe{sub 3}O{sub 4}@SiO{sub 2} and Degussa P25 into the mixed solution of NaOH, ethanol, oleic acid, Re(NO{sub 3}){sub 3} and NH{sub 4}F. Moreover, the obtained composites were explored for photocatalytic applications. It was found that FS/UC/T emit UV–vis light under irradiation of 980 nm laser and efficient energy transfer from β-NaYF{sub 4}:Yb{sup 3+},Tm{sup 3+} to TiO{sub 2} was verified. The photodegradation experiments for treating methylene blue (MB), rhodamine B (RhB), methyl orange (MO) and colorless phenol were carried out to evaluate the photocatalytic activities of the samples. The photodegradation rates reach 76.62%, 68.48%, 30.05% and 27.16% for MB, RhB, MO and phenol under irradiation of 980 nm laser, respectively, which suggested magnetic FS/UC/T composite is an advanced NIR-driven photocatalyst. Moreover, the magnetic photocatalyst showed easy separation and good stability in the recycled tests. It suggested a promising system to utilize the NIR energy for photocatalysis based on TiO{sub 2} and to utilize the magnetic for separation of photocatalysts, which will contribute to practical environmental remediation in the future.

36 MATERIALS SCIENCE↗