SEARCH · Search NASA

Results for “Yield function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Combustion of solid carbon rods in zero and normal gravity

In order to investigate the mechanism of carbon combustion and to assess the importance of gravitational induced convection on the process, zero and normal gravity experiments were conducted in which spectroscopic carbon rods were resistance ignitied and burned in dry oxygen environments. In the zero-gravity drop tower tests, a blue flame surrounded the rod, showing that a gas phase reaction in which carbon monoxide was oxidized to carbon dioxide was taking place. The ratio of flame diameter to rod diameter was obtained as a function of time. It was found that this ratio was inversely proportional to both the oxygen pressure and the rod diameter. In the normal gravity tests, direct mass spectrometric sampling was used to measure gas phase concentrations. The gas sampling probe was positioned near the circumference of a horizontally mounted 0.615 cm diameter carbon rod, either at the top or at angles of 45 deg to 90 deg from the top, and yielded concentration profiles of CO2, CO, and O2 as a function of distance from the surface. The mechanism controlling the combustion process was found to change from chemical process control at the 90 deg and 45 deg probe positions to mass transfer control at the 0 deg probe position at the top of the rod. Under the experimental conditions used, carbon combustion was characterized by two surface reactions, 2C + O2 yields 2CO and CO2 + C yields 2CO, and a gas phase reaction, 2CO + O2 yields 2CO2.

Spuckler, C. M.↗

NASA NTRS1984

Thermal shock in a circumferentially cracked hollow cylinder with cladding

An theoretical analysis is presented which demonstrates the effect of cladding on the thermal resistance of a circumferentially cracked hollow cylinder. The cladding is assumed to be bonded to the inner wall of the hollow cylinder. The axisymmetric circumferential crack may be either embedded in the cylinder wall or may be an edge crack which passes through the clad and opens into the inner wall of the hollow cylinder. The problem is formulated mathematically and a solution is found which is in the form of a single integral equation. The integral equation is solved numerically and yields estimates of transient temperature distributions, thermal stresses in the uncracked cylinder, and stress intensity factors as a function of time for various cladding thickness to cylinder wall thickness ratios. It is shown that yielding of the clad under certain conditions can result in a reduction in the magnitude of the stress intensity factor for the crack tip in the elastic base material.

Nied, H. F.↗

NASA NTRS2016

Simple Test Functions in Meshless Local Petrov-Galerkin Methods

Two meshless local Petrov-Galerkin (MLPG) methods based on two different trial functions but that use a simple linear test function were developed for beam and column problems. These methods used generalized moving least squares (GMLS) and radial basis (RB) interpolation functions as trial functions. These two methods were tested on various patch test problems. Both methods passed the patch tests successfully. Then the methods were applied to various beam vibration problems and problems involving Euler and Beck's columns. Both methods yielded accurate solutions for all problems studied. The simple linear test function offers considerable savings in computing efforts as the domain integrals involved in the weak form are avoided. The two methods based on this simple linear test function method produced accurate results for frequencies and buckling loads. Of the two methods studied, the method with radial basis trial functions is very attractive as the method is simple, accurate, and robust.

Raju, Ivatury S.↗

NASA NTRS1974

Assembly and analysis of fragmentation data for liquid propellant vessels

Fragmentation data was assembled and analyzed for exploding liquid propellant vessels. These data were to be retrieved from reports of tests and accidents, including measurements or estimates of blast yield, etc. A significant amount of data was retrieved from a series of tests conducted for measurement of blast and fireball effects of liquid propellant explosions (Project PYRO), a few well-documented accident reports, and a series of tests to determine auto-ignition properties of mixing liquid propellants. The data were reduced and fitted to various statistical functions. Comparisons were made with methods of prediction for blast yield, initial fragment velocities, and fragment range. Reasonably good correlation was achieved. Methods presented in the report allow prediction of fragment patterns, given type and quantity of propellant, type of accident, and time of propellant mixing.

Baker, W. E.↗

NASA NTRSDate not supplied

Discontinuous Galerkin and Related Methods for ODE

A defining feature of the discontinuous Galerkin (DG) method for ODE is that the piecewise polynomial solution can have a jump discontinuity at the beginning of each step. Starting from the standard integral formulation, the DG method is derived here in differential form. The key ingredient is a polynomial called the correction function, which helps ‘correct’ the discontinuous solution by approximating the jump and yields a continuous one. Under the right Radau quadrature, this continuous solution is identical to the solutions by the right Radau collocation and the continuous Galerkin (CG) methods. Next, the correction function facilitates the construction of the associated implicit Runge-Kutta schemes (IRK-DG). Different quadratures for DG result in different IRK-DG methods: left Radau quadrature in Radau IA, right Radau quadrature in Radau IIA or right Radau collocation, and Gauss quadrature in a method called DG-Gauss. The construction of IRK-DG clarifies the meaning and facilitates the proofs of various 𝐵(𝑝), 𝐶(𝜂), and 𝐷(𝜁) conditions for accuracy. The two consequences of these conditions are that all 𝑠-stage IRK-DG methods are accurate to order 2𝑠 − 1, and the IRK-DG methods of Radau type are unique. Numerical examples showing the behavior of the DG solutions are provided. In all, the correction function plays a key role and helps establish the relations among the DG, IRK-DG, collocation, and CG schemes.

numerical methods↗

NASA NTRSDate not supplied

Discontinuous Galerkin and Related Methods for ODE

Starting from the standard integral formulation, the DG method is derived here in differential form. The key ingredient is a polynomial called the correction function, which helps ‘correct’ the discontinuous solution by approximating the jump and yields a continuous one. Under the right Radau quadrature, this continuous solution is identical to the solutions by the right Radau collocation and the continuous Galerkin (CG) methods. Next, the correction function facilitates the construction of the associated implicit Runge-Kutta schemes (IRK-DG). Different quadratures for DG result in different IRK-DG methods: left Radau quadrature in Radau IA, right Radau quadrature in Radau IIA or right Radau collocation, and Gauss quadrature in a method called DG-Gauss. The construction of IRK-DG clarifies the meaning and facilitates the proofs of various 𝐵(𝑝), 𝐶(𝜂), and 𝐷(𝜁) conditions for accuracy. The two consequences of these conditions are that all 𝑠-stage IRK-DG methods are accurate to order 2𝑠− 1, and the IRK-DG methods of Radau type are unique. Numerical examples showing the behavior of the DG solutions are provided. In all, the correction function plays a key role and helps establish the relations among the DG, IRK DG, collocation, and CG methods.

Numerical Methods for Ordinary Differential Equati↗

NASA NTRS1994

An Ab Initio Study of CuCO

Modified coupled-pair functional (MCPF) calculations and coupled cluster singles and doubles calculations, which include a perturbational estimate of the connected triples [CCSD(T)], yield a bent structure for CuCO, thus, supporting the prediction of a nonlinear structure based on density functional (DF) calculations. Our best estimate for the binding energy is 4.9 +/- 1.4 kcal/mol; this is in better agreement with experiment (6.0 +/- 1.2 kcal/mol) than the DF approach which yields a value (19.6 kcal/mol) significantly larger than experiment.

Bauschlicher, Charles W., Jr.↗

NASA NTRS1992

Optical and radio variability in blazars

An analysis is presented of the optical (0.44 micron) and radio flux density variations (4.8, 8.0, and 14.5 GHz) of the five best observed variable AGN, of which three are BL Lac objects and two are optically violent variable (OVV) quasars. For each object the nature of the variability at individual wavelengths is determined by using a structure function analysis and the autocorrelation function as calculated from the discrete correlation technique. Both techniques yield similar results, showing that the optical variations are similar for all objects and are a combination of flicker and shot noise. The radio variability is distinct, being described by shot noise (less variation at short times), with the two OVVs exhibiting the most extreme behavior. The time lag between the variations at the three radio frequencies and the optical flux is studied with the discrete cross-correlation function and the mean variance methods. It is concluded that the optical and radio emitting regions are physically related, exist on distinct time scales, and excite their synchrotron emitting plasmas differently.

Hufnagel, Beth R.↗

NASA NTRS2005

Prediction of Turbulence-Generated Noise in Unheated Jets: JeNo Technical Manual (Version 1.0) - Part 1

The model-based approach, used by the JeNo code to predict jet noise spectral directivity, is described. A linearized form of Lilley's equation governs the non-causal Green s function of interest, with the non-linear terms on the right hand side identified as the source. A Reynolds-averaged Navier-Stokes (RANS) solution yields the required mean flow for the solution of the propagation Green s function in a locally parallel flow. The RANS solution also produces time- and length-scales needed to model the non-compact source, the turbulent velocity correlation tensor, with exponential temporal and spatial functions. It is shown that while an exact non-causal Green s function accurately predicts the observed shift in the location of the spectrum peak with angle as well as the angularity of sound at low to moderate Mach numbers, the polar directivity of radiated sound is not entirely captured by this Green s function at high subsonic and supersonic acoustic Mach numbers. Results presented for unheated jets in the Mach number range of 0.51 to 1.8 suggest that near the peak radiation angle of high-speed jets, a different source/Green s function convolution integral may be required in order to capture the peak observed directivity of jet noise. A sample Mach 0.90 heated jet is also discussed that highlights the requirements for a comprehensive jet noise prediction model.

Khavaran, Abbas↗

NASA NTRS1994

A new approach for determining fully empirical altimeter wind speed model functions

A statistical technique is developed for determining fully empirical model functions relating altimeter backscatter (sigma(sub 0)) measurements to near-surface neutral stability wind speed. By assuming that sigma(sub 0) varies monotonically and uniquely with wind speed, the method requires knowledge only of the separate, rather than joint distribution functions of sigma(sub 0) and wind speed. Analytic simplifications result from using a Weibull distribution to approximate the global ocean wind speed distribution; several different wind data sets are used to demonstrate the validity of the Weibull approximation. The technique has been applied to 1 year of Geosat data. Validation of the new and historical model functions using an independent buoy data set demonstrates that the present model function not only has small overall bias and root mean square (RMS) errors, but yields smaller systematic error trends with wind speed and pseudowave age than previously published models. The present analysis suggests that generally accuracte altimeter model functions can be derived without the use of colocated measurements, nor is additional significant wave height information measured by the altimeter necessary.

Freilich, M. H.↗

NASA NTRS2012

Improved Displacement Transfer Functions for Structure Deformed Shape Predictions Using Discretely Distributed Surface Strains

In the formulations of earlier Displacement Transfer Functions for structure shape predictions, the surface strain distributions, along a strain-sensing line, were represented with piecewise linear functions. To improve the shape-prediction accuracies, Improved Displacement Transfer Functions were formulated using piecewise nonlinear strain representations. Through discretization of an embedded beam (depth-wise cross section of a structure along a strain-sensing line) into multiple small domains, piecewise nonlinear functions were used to describe the surface strain distributions along the discretized embedded beam. Such piecewise approach enabled the piecewise integrations of the embedded beam curvature equations to yield slope and deflection equations in recursive forms. The resulting Improved Displacement Transfer Functions, written in summation forms, were expressed in terms of beam geometrical parameters and surface strains along the strain-sensing line. By feeding the surface strains into the Improved Displacement Transfer Functions, structural deflections could be calculated at multiple points for mapping out the overall structural deformed shapes for visual display. The shape-prediction accuracies of the Improved Displacement Transfer Functions were then examined in view of finite-element-calculated deflections using different tapered cantilever tubular beams. It was found that by using the piecewise nonlinear strain representations, the shape-prediction accuracies could be greatly improved, especially for highly-tapered cantilever tubular beams.

Ko, William L.↗

NASA NTRS1972

Dynamic response of a plane-symmetrical exothermic reaction center.

?sger,An analysis of the dynamic behavior of an idealized, plane-symmetrical exothermic reaction center is presented. The conservation equations for the reaction center are combined and yield a single integral equation expressing a nonlinear transfer function of the system for which the input is provided by a given time profile of the heat released per unit mass while the output gives the pressure pulse it generates under the restriction of plane-symmetrical motion. The solution is governed by a Daumk]hler number. For a given form of the exothermic power pulse profile, the dynamic behavior of the system is completely specified in terms of only this Daumk]hler number and the heat of reaction per unit mass of the combustible medium. Specific solutions are worked out for a set of typical elementary power pulse profiles, and the practical significance of the results is illustrated by their application to the problem of transition to detonation in an explosive gas.

Meyer, J. W.↗

NASA NTRS1973

A high frequency correction to the Kirchhoff approximation, with application to rough surface EM wave scattering

A high frequency correction to the Kirchhoff approximation is developed for application to rough surface scattering. An approximate solution to the magnetic field integral equation for perfect conductivity and plane wave excitation yields a perturbed surface current expressed as a linear function of the second derivatives of surface height. The corrected surface current vector is substituted into the far field Stratton-Chu integral and average backscattered powers for the four polarization combinations are computed on the assumption that the surface is describable as a stationary Gaussian random process. The strength of this scattering solution is that it can account for height curvature correlation without requiring small height and slope.

Jackson, F. C.↗

NASA NTRS1975

Design, processing, and testing of LSI arrays for space station

Data for the beam-leaded silicon-on-sapphire (SOS) process using the TA5388 dual-complementary pair plus inverted circuit show the stability of the dc device characteristics through the complete beam-lead processing and packaging steps. A more complex circuit, the TA6567 - a silicon-gate, voltage-sense BL/CMOS/SOS 256-bit RAM, has also been made that was functionally perfect at wafer probe. Efforts to increase the yield of this circuit and to obtain electrically perfect packaged units are discussed.

Schneider, W. C.↗

NASA NTRS1979

Aerodynamic characteristics of sixteen electric, hybrid, and subcompact vehicles

An elementary electric and hybrid vehicle aerodynamic data base was developed using data obtained on sixteen electric, hybrid, and sub-compact production vehicles tested in the Lockheed-Georgia low-speed wind tunnel. Zero-yaw drag coefficients ranged from a high of 0.58 for a boxey delivery van and an open roadster to a low of about 0.34 for a current four-passenger proto-type automobile which was designed with aerodynamics as an integrated parameter. Vehicles were tested at yaw angles up to 40 degrees and a wing weighting analysis is presented which yields a vehicle's effective drag coefficient as a function of wing velocity and driving cycle. Other parameters investigated included the effects of windows open and closed, radiators open and sealed, and pop-up headlights. Complete six-component force and moment data are presented in both tabular and graphical formats. Only limited commentary is offered since, by its very nature, a data base should consist of unrefined reference material. A justification for pursuing efficient aerodynamic design of EHVs is presented.

Kurtz, D. W.↗

NASA NTRS1978

Acoustic emission testing of composite vessels under sustained loading

Acoustic emission (AE) tests have been conducted on small-diameter Kevlar 49/epoxy pressure vessels subjected to long-term sustained load-to-failure tests. Single-cycle burst tests were used as a basis for determining the test pressure in the sustained-loading tests. AE data from two vessel locations were compared. The data suggest that AE from vessel wall-mounted transducers is quite different for identical vessels subjected to the same pressure loading. AE from boss-mounted transducers yielded relatively consistent values. These values were not a function of time for vessel failure. The development of an AE test procedure for predicting the residual service life or integrity of composite vessels is discussed.

Lark, R. F.↗

NASA NTRS1980

Steady, Oscillatory, and Unsteady Subsonic and Supersonic Aerodynamics, production version (SOUSSA-P 1.1). Volume 1: Theoretical manual

Recent developments of the Green's function method and the computer program SOUSSA (Steady, Oscillatory, and Unsteady Subsonic and Supersonic Aerodynamics) are reviewed and summarized. Applying the Green's function method to the fully unsteady (transient) potential equation yields an integro-differential-delay equation. With spatial discretization by the finite-element method, this equation is approximated by a set of differential-delay equations in time. Time solution by Laplace transform yields a matrix relating the velocity potential to the normal wash. Premultiplying and postmultiplying by the matrices relating generalized forces to the potential and the normal wash to the generalized coordinates one obtains the matrix of the generalized aerodynamic forces. The frequency and mode-shape dependence of this matrix makes the program SOUSSA useful for multiple frequency and repeated mode-shape evaluations.

Morino, L.↗

NASA NTRS1981

The monogroove high performance heat pipe

The development of the monogroove heat pipe, a fundamentally new high-performance device suitable for multi-kilowatt space radiator heat-rejection systems, is reported. The design separates heat transport and transfer functions, so that each can be separately optimized to yield heat transport capacities on the order of 25 kW/m. Test versions of the device have proven the concept of heat transport capacity control by pore dimensions and the permeability of the circumferential wall wick structure, which together render it insensitive to tilt. All cases tested were for localized, top-side heat input and cooling and produced results close to theoretical predictions.

Alario, J.↗