Search NASA⌕ Search

SEARCH · Search NASA

Results for “semiconductor models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Disordered surface structure of an ultra-thin tin oxide film on Rh(100)

The composition and structure of an ultra-thin tin oxide film on Rh(100), prepared by the deposition of a submonolayer of tin followed by annealing in an O{sub 2} atmosphere, were examined by a combination of low-energy electron diffraction (LEED), Auger electron spectroscopy, X-ray photoemission spectroscopy (XPS), scanning tunneling microscopy (STM), and ab initio calculations based on density functional theory (DFT). Although the LEED pattern exhibited c(2 x 8) spots clearly, a uniform periodicity of the c(2 x 8) unit cell was not observed in the STM images. The bright dots that were observed periodically in the STM image were similar to those of the ultra-thin Sn{sub 2}O{sub 3} film on Rh(111) and formed a zigzag arrangement with the numerous point and line defects. The XPS study revealed that the Sn 3d{sub 5/2} peak of the tin oxide film on Rh(100) showed a metallic state as well as an oxide state that was between the SnO{sub 2} and SnO states. The structural models, which were based on the Sn{sub 2}O{sub 3} structure on Rh(111), were determined using DFT total energy calculations. The simulated STM images of the two slightly different honeycomb-chain models well reproduced the zigzag arrangement in the STM image. The STM image and XPS spectrum were interpreted using a combination of the two models.

36 MATERIALS SCIENCE↗

Effect of realistic metal electronic structure on the lower limit of contact resistivity of epitaxial metal-semiconductor contacts

The effect of realistic metal electronic structure on the lower limit of resistivity in [100] oriented n-Si is investigated using full band Density Functional Theory and Semi-Empirical Tight Binding calculations. It is shown that the “ideal metal” assumption may fail in some situations and, consequently, underestimate the lower limit of contact resistivity in n-Si by at least an order of magnitude at high doping concentrations. The mismatch in transverse momentum space in the metal and the semiconductor, the so-called “valley filtering effect,” is shown to be sensitive to the details of the transverse boundary conditions for the unit cells used. The results emphasize the need for explicit inclusion of the metal atomic and electronic structure in the atomistic modeling of transport across metal-semiconductor contacts.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A new time-dependent analytic model for radiation-induced photocurrent in finite 1D epitaxial diodes

Photocurrent generated by ionizing radiation represents a threat to microelectronics in radiation environments. Circuit simulation tools such as SPICE can be used to analyze these threats, and typically rely on compact models for individual electrical components such as transistors and diodes. Compact models consist of a handful of differential and/or algebraic equations, and are derived by making simplifying assumptions to any of the many semiconductor transport equations. Historically, many photocurrent compact models have suffered from accuracy issues due to the use of qualitative approximation, rather than mathematically correct solutions to the ambipolar diffusion equation. A practical consequence of this inaccuracy is that a given model calibration is trustworthy over only a narrow range of operating conditions. This report describes work to produce improved compact models for photocurrent. Specifically, an analytic model is developed for epitaxial diode structures that have a highly doped subcollector. The analytic model is compared with both numerical TCAD calculations, as well as the compact model described in reference. The new analytic model compares well against TCAD over a wide range of operating conditions, and is shown to be superior to the compact model from reference.

99 GENERAL AND MISCELLANEOUS↗

Static and Dynamic Effects of Lateral Carrier Diffusion in Semiconductor Lasers

Electron and hole diffusions in the plane of semiconductor quantum wells play an important part in the static and dynamic operations of semiconductor lasers. It is well known that the value of diffusion coefficients affects the threshold pumping current of a semiconductor laser. At the same time, the strength of carrier diffusion process is expected to affect the modulation bandwidth of an AC-modulated laser. It is important not only to investigate the combined DC and AC effects due to carrier diffusion, but also to separate the AC effects from that of the combined effects in order to provide design insights for high speed modulation. In this presentation, we apply a hydrodynamic model developed by the present authors recently from the semiconductor Bloch equations. The model allows microscopic calculation of the lateral carrier diffusion coefficient, which is a nonlinear function of the carrier density and plasma temperature. We first studied combined AC and DC effects of lateral carrier diffusion by studying the bandwidth dependence on diffusion coefficient at a given DC current under small signal modulation. The results show an increase of modulation bandwidth with decrease in the diffusion coefficient. We simultaneously studied the effects of nonlinearity in the diffusion coefficient. To clearly identify how much of the bandwidth increase is a result of decrease in the threshold pumping current for smaller diffusion coefficient, thus an effective increase of DC pumping, we study the bandwidth dependence on diffusion coefficient at a given relative pumping. A detailed comparison of the two cases will be presented.

Li, Jian-Zhong↗

Energetics of molecular-beam epitaxy models

The removal energies of constituent atoms from various unreconstructed semiconductor surfaces are calculated using a Green function method. An efficient difference-equation approach within the second-neighbor tight-binding model is employed. For a compound AB, binding energies for the A and B atoms on the (111), (-1 -1 -1), (100), and (110) surfaces are calculated. Analyses are made of the energy to remove an atom from the nearly full surface and from the nearly empty surface. Results are presented for Si, GaAs, CdTe, and HgTe; and the surface sublimation energies are found to depend on surface coverage and do not display a simple linear relationship to the number of bonds broken, as is often assumed in modeling growth by MBE.

Krishnamurthy, Srinivasan↗

FNAS computational modeling

Numerical calculations of the electronic properties of liquid II-VI semiconductors, particularly CdTe and ZnTe were performed. The measured conductivity of these liquid alloys were modeled by assuming that the dominant temperature effect is the increase in the number of dangling bonds with increasing temperature. For low to moderate values of electron correlation, the calculated conductivity as a function of dangling bond concentration closely follows the measured conductivity as a function of temperature. Both the temperature dependence of the chemical potential and the thermal smearing in region of the Fermi surface have a large effect on calculated values of conductivity.

Franz, J. R.↗

Unipolar resistive switching in metal oxide/organic semiconductor non-volatile memories as a critical phenomenon

Diodes incorporating a bilayer of an organic semiconductor and a wide bandgap metal oxide can show unipolar, non-volatile memory behavior after electroforming. The prolonged bias voltage stress induces defects in the metal oxide with an areal density exceeding 10{sup 17 }m{sup −2}. We explain the electrical bistability by the coexistence of two thermodynamically stable phases at the interface between an organic semiconductor and metal oxide. One phase contains mainly ionized defects and has a low work function, while the other phase has mainly neutral defects and a high work function. In the diodes, domains of the phase with a low work function constitute current filaments. The phase composition and critical temperature are derived from a 2D Ising model as a function of chemical potential. The model predicts filamentary conduction exhibiting a negative differential resistance and nonvolatile memory behavior. The model is expected to be generally applicable to any bilayer system that shows unipolar resistive switching.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Order and disorder and their influences on optical absorption of glasses in the gap region

The exponential increase of the absorption coefficient near the absorption edge is usually explained by existence of the density-of-states tails. Among the quoted theoretical models which are widely used to explain the manifestations of the Urbach rule in semiconductors, are the Sumi–Toyozava and the Dow–Redfield models and ab initio (from beginning) theory. Our barrier-cluster-heating model assumes the different creating mechanism of exponential tails. The energy by optical transition is provided to electrons except from photons also from vibration of microregion. It deals about the replenishment of absented photons energy, which is smaller as gap width. Absented energy needed for the transition by light absorption is accumulated in certain microregions of material in the form of vibrational energy. At absorption sufficiently big package of accumulated energy can be used. Energy of emptied microarea is filled by phonons from surrounding of microarea (as result of temperature status of surrounding), resp. phonons of optical background which are created in given microarea at non radiative recombination of carriers. In this work simplified process at derivating of Urbach rule is listed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modeling emission lag after photoexcitation

A theoretical model of delayed emission following photoexcitation from metals and semiconductors is given. Its numerical implementation is designed for beam optics codes used to model photocathodes in rf photoinjectors. The model extends the Moments approach for predicting photocurrent and mean transverse energy as moments of an emitted electron distribution by incorporating time of flight and scattering events that result in emission delay on a sub-picosecond level. The model accounts for a dynamic surface extraction field and changes in the energy distribution and time of emission as a consequence of the laser penetration depth and multiple scattering events during transport. Usage in the Particle-in-Cell code MICHELLE to predict the bunch shape and duration with or without laser jitter is given. The consequences of delayed emission effects for ultra-short pulses are discussed.

36 MATERIALS SCIENCE↗

Application of small-signal modeling and measurement techniques to the stability analysis of an integrated switching-mode power system

Small-signal modeling techniques are used in a system stability analysis of a breadboard version of a complete functional electrical power system. The system consists of a regulated switching dc-to-dc converter, a solar-cell-array simulator, a solar-array EMI filter, battery chargers and linear shunt regulators. Loss mechanisms in the converter power stage, including switching-time effects in the semiconductor elements, are incorporated into the modeling procedure to provide an accurate representation of the system without requiring frequency-domain measurements to determine the damping factor. The small-signal system model is validated by the use of special measurement techniques which are adapted to the poor signal-to-noise ratio encountered in switching-mode systems. The complete electrical power system with the solar-array EMI filter is shown to be stable over the intended range of operation.

Wong, R. C.↗

Analytical model of electron transport in polycrystalline, degenerately doped ZnO films

An analytical description of the charge carrier transport, valid for non-degenerated and degenerated semiconductors, was developed, critically reviewed, and fitted to the temperature-dependent Hall mobility data of magnetron sputtered, degenerately doped ZnO:Al films. Our extended model for grain boundary scattering in semiconductors of arbitrary degeneracy is based on previous models from literature and suitable to describe the Hall mobility of the carriers as a function of the free carrier concentration and the temperature at the same time. It is mathematically simple enough for a fast fit procedure, which is not possible with most of the previous models. Applying a combined transport model consisting of ionized impurity scattering, phonon scattering, and grain boundary scattering in degenerate semiconductors, we were able to determine the trap density at the grain boundaries Nₜ ≈ 3×10¹³ to 5×10¹³cm⁻² and the deformation potential E{sub ac} in the range of 5 eV to 9 eV depending on the details of the transport model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of electrical behavior and dielectric properties in polycristalline Pr0.8Sr0.2MnO3 manganite perovskite

Highlights: • Transport properties of Pr{sub 0.8}Sr{sub 0.2}MnO{sub 3} are investigated in a large range of temperature (80–500 K) and frequency (40–10{sup 7} Hz). • DC measurements show two conduction mechanisms at low and high temperature. • The complex impedance shows that our structure obeys at Cole-Cole model. • Dielectric results reveal a dielectric transition which is well fitted by Curie-Weiss law. • AC conductivity is described by Jonscher power law. The NSPT and Drude models are used to describe the conduction mechanism. - Abstract: The electrical and dielectric properties of Pr{sub 0.8}Sr{sub 0.2}MnO{sub 3} perovskite prepared by the solid-state method were investigated. The complex impedance results showed the contribution of grain and grain boundaries in the conduction mechanism. The dielectric data have confirmed the presence of interfacial polarization in the structure. Moreover, a dielectric transition fitted by Curie-Weiss law was observed. Besides, the observed relaxation diffuse phase transition is attributed to a strong heterogeneity introduced by the substitution of Pr by Sr ions. DC electrical measurements indicate that the structure exhibits a semiconductor behavior and the conductivity is governed by hopping process. The AC conductivity measurements show a clear semiconductor-metallic transition at high temperatures. The AC conductivity data can be divided into two parts, the first of which is a semiconductor one, described by the NSPT model, at low temperatures and the second is a metallic regime, fitted by the classical Drude model, at high temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron Reconstruction and Identification with the ATLAS Detector

Several Standard Model processes contain electrons in the final state. Also, many signatures expected from physics beyond the Standard Model include one or more electrons. This paper describes the electron reconstruction along with some of the identification criteria used in the ATLAS detector. The expected performance at the start-up of the experiment are also presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Strain tuning of topological band order in cubic semiconductors

We theoretically explore the possibility of tuning the topological order of cubic diamond/zinc-blende semi- conductors with external strain. Based on a simple tight-binding model, we analyze the evolution of the cubic semiconductor band structure under hydrostatic or biaxial lattice expansion, by which a generic guiding princi- ple is established that biaxial lattice expansion can induce a topological phase transition of small band-gap cubic semiconductors via a band inversion and symmetry breaking at point. Using density functional theory cal- culations, we demonstrate that a prototype topological trivial semiconductor, InSb, is converted to a nontrivial topological semiconductor with a 2% 3% biaxial lattice expansion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Computer modeling of inversion layer MOS solar cells and arrays

A two dimensional numerical model of the inversion layer metal insulator semiconductor (IL/MIS) solar cell is proposed by using the finite element method. The two-dimensional current flow in the device is taken into account in this model. The electrostatic potential distribution, the electron concentration distribution, and the hole concentration distribution for different terminal voltages are simulated. The results of simple calculation are presented. The existing problems for this model are addressed. Future work is proposed. The MIS structures are studied and some of the results are reported.

Ho, Fat Duen↗

On the origin of the two-dimensional electron gas at AlGaN/GaN heterojunctions and its influence on recessed-gate metal-insulator-semiconductor high electron mobility transistors

It is commonly accepted that interface states at the passivation surface of AlGaN/GaN heterostructures play an important role in the formation of the 2DEG density. Several interface state models are cited throughout literature, some with discrete levels, others with different kinds of distributions, or a combination of both. The purpose of this article is to compare the existing interface state models with both direct and indirect measurements of these interface states from literature (e.g., through the hysteresis of transfer characteristics of Metal-Insulator-Semiconductor High Electron Mobility Transistors (MISHEMTs) employing such an interface in the gate region) and Technology Computer Aided Design (TCAD) simulations of 2DEG densities as a function of the AlGaN thickness. The discrepancies between those measurements and TCAD simulations (also those commonly found in literature) are discussed. Then, an alternative model inspired by the Disorder Induced Gap State model for compound semiconductors is proposed. It is shown that defining a deep border trap inside the insulator can solve these discrepancies and that this alternative model can explain the origin of the two dimensional electron gas in combination with a high-quality interface that, by definition, has a low interface state density.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Patterning via optical-saturable transformations: A review and simple simulation model

Most of the nanoscale fabrication in the semiconductor industry is based on patterning with scanning-electron beam lithography (SEBL). Although this approach is very versatile and has very high resolution, it is intrinsically a serial writing process, and therefore, relatively slow. Our group has been investigating alternative nano-fabrication techniques, adapted from ideas of saturating optical transitions such as those used in stimulated emission-depletion microscopy and related methods, and optical interference lithography. Linewidths and resolutions on the scale of a few tens of nanometers and below are highly desirable for various applications in nanotechnology. However, the spatial resolution of optical lithography is restricted by diffraction. In the past, we developed absorbance modulation to overcome this limit. This approach utilizes photochromic molecules that can be optically switched between two thermally stable states, one opaque and the other transparent. However, absorbance modulation is limited to surface (2-D) patterning. Here, we report on an alternative approach that exploits unique combinations of spectrally selective reversible and irreversible photochemical transitions to achieve deep subwavelength resolution with potential extension to 3-dimensions. This approach, which we refer to as patterning via optical-saturable transformations have the potential for massive parallelism, enabling the creation of nanostructures and devices at a speed far surpassing what is possible with SEBL. The aim of our research is to translate the success in circumventing Abbe's diffraction limit in optical microscopy to optical lithography.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Observations on ion track structure in semiconductors : a phenomenological study

An ion track structure model at the nanometer scale is presented. The model is based on electrostatic principles and is supported by observed experimental results conducted on power MOSFETs. The model predicts the existence of a transient induced electric field following the passage of an energetic heavy ion. There are two segments to the field (a radial and an axial component). It is the interaction of this transient electric field with the local environment that can trigger a catastrophic failure.

SEGR↗