Search NASA⌕ Search

SEARCH · Search NASA

Results for “source separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Doubly Stereogenic Sandwich Frameworks: Diastereomeric Metallobiscorroles

A number of Group 6 metallobiscorrole sandwich compounds with square-antiprismatic coordination were separated into diastereomers by means of careful preparative thin-layer chromatography. The diastereomers differ with respect to the relative orientation of the corrole macrocycles, which are rotated approximately ± 45° or ± 135° relative to each other. The most clear-cut results were obtained for two tungsten corroles, W[TBCF 3 PC] 2 {TBCF 3 PC = meso-tris[3,5-bis(trifluoromethyl)phenyl]corrolato} and W[TDOMePC] 2 [TDOMePC = meso-tris(3,5-dimethoxyphenyl)corrolato], for which single-crystal X-ray structures were obtained for the 135° diastereomer; the existence of the 45° diastereomer was inferred by elimination and with support from DFT calculations. For Mo[TBCF 3 PC] 2 and W[TBCF 3 PC] 2 , both diastereomers were also fully characterized spectroscopically and their 1 H NMR spectra were essentially fully assigned. The fact that each diastereomer is chiral and exists as two enantiomers (which was previously demonstrated for the 135° form of a tungsten biscorrole) establishes the doubly stereogenic nature of the metallobiscorrole framework – to our knowledge, the first such demonstration for a sandwich compound.

Aromatic compounds↗
DOE OSTI2025

Reported Energy and Cost Savings from the DOE ESPC IDIQ Program: FY 2024

Energy Savings Performance Contracts (ESPCs)are a contractual mechanism that allow a federal agency to procure energy savings and facility improvements without upfront capital costs to reduce costs and resiliency. ESPCs are covered under FAR Part 23.2, and 42 USC § 8287. Section 8287(a)(2)(A) of Title 42 of the U.S. Code requires that each energy savings performance contract (ESPC) undergo an annual energy audit, resulting in a separate audit report for every project. The objective of the present report is to compile and analyze all annual ESPC audit reports issued between October 1, 2023, and September 30, 2024, for projects awarded under Generations 1, 2, and 3 of DOE’s ESPC IDIQ contracts. During this period, 205 measurement and verification (M&V) reports were produced for 200 projects; the total number of reports exceeds the number of projects because some projects generated more than one report(for example, a few projects measure savings twice per year and produce two audit reports annually, each covering a different six-month period). By aggregating the results from these individual audits, the report determines the portfolio-wide realization rate of energy and cost savings for all active ESPC projects awarded under DOE’s IDIQ program. For all 205audit reports, sufficient information was available to compare project-level estimated, reported, and guaranteed cost savings. Reported cost savings accounted for ESCO verified savings per each project’s M&V plan. The total reported cost savings for the period addressed were $\$$647.8million,compared with the total guaranteed cost savings of $\$$601.6million. On average across the reported projects: •ESPC contractors guaranteed 92.8% of the estimated cost savings• projects reported achieving 100.0% of the estimated cost savings• projects reported achieving 107.7% of the guaranteed cost savings. The M&V performed for the period indicated adjustments for government operations and maintenance impacts to savings amount to$\$$43.9millionandcould be restored with the original operational parameters for impacted projects. Accounting for this potential cost savings impact, these projects still realized 100.4% of the guaranteed cost savings. The information on estimated and reported energy savings was collected and compared for all 205of the reports examined. Based on site energy, estimated savings totaled 14.88million MMBtu, and reported savings were 15.33million MMBtu; 3.1% greater than the estimated energy savings. All of the reports examined contained sufficient information to calculate source energy savings. Based on site-adjusted source energy, total estimated energy savings were 20.90 million MMBtu, and reported savings were 21.22million MMBtu, 101.5% of the estimated energy savings. For water savings, the estimated savings were 11,539,055 kGal and the reported savings were 13,315,930 kGal. This means 1,776,875 kGal more water was saved than estimated, which is about 15% higher than the estimate. These results indicate that, overall, the reported energy savings slightly exceeded the estimated values, while estimated water savings significantly exceeded estimated values, suggesting that the projects achieved greater cost savings than originally projected. The total annual expense for the ESCOs to perform annual M&V audits and reporting was $\$$10.02million. Through this effort, $\$$647.8 million in annual cost savings was verified. The M&V results indicated that $\$$43.9 million of these verified savings reflected adjustments due to government operations A-6and maintenance impacts, which could be restored under the original operational parameters for the affected projects. These findings show the value of M&V that only costs 1.7%of the guaranteed cost savings to ensure guarantees are met.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Advanced Computational Modeling of High-Level Waste Vitrification at the Hanford Site

The U.S. Department of Energy (DOE) has selected vitrification for stabilizing legacy tank waste at the Hanford site, where radioactive waste from plutonium production was historically stored in underground tanks. This waste will be separated into low-activity waste (LAW) and high-level waste (HLW) fractions and processed at the Waste Treatment and Immobilization Plant (WTP). At WTP, glass melters are used for the vitrification of radioactive tank waste, transforming it into a stable borosilicate glass form for safe long-term storage. The melter vessel is constructed from highly durable and heat-resistant materials, where the vitrification process occurs. The main regions that are modeled are the melt pool, plenum, cold cap, riser/discharge chamber, and surrounding structure with insulation layers. Forced convection induced by air bubblers at the base of the melter ensure uniform temperature distribution and provide heat to the cold cap layer. The cold cap is a region of reacting batch feed that floats on top of the molten glass and is where the batch-to-glass reactions occur. Joule heating provided by electrodes mounted along the vertical walls of the melter and immersed directly in the glass, generates the necessary heat for the net endothermic conversion processes that occur in the cold cap. The high temperatures, radioactivity, and opaque nature of the glass prevent direct observation inside the melters. Therefore, computational models are essential for providing insight into factors that affect melter throughput. Thermocouples in the plenum provide operators with plenum temperature measurements. Operational adjustments include bubbling rate, voltage supplied to the electrodes, feed adjustments, and glass removal rate. Different computational fluid dynamics (CFD) models have been developed, each serving a specific purpose. There are CFD models of different scale melters, as well as models that capture the two-phase flow interfaces of rising bubbles in the molten glass or models with a simplified molten glass region so that the surrounding structure and plenum can be feasibly incorporated. Pilot-scale melter models have been developed to serve as validation of the methods employed in the simulation of the full-scale WTP melters. Models incorporating resolved bubbling are used to develop momentum source terms to implement into a single phase, multi-region, steady-state flow model that is being validated by measured process parameters such as glass production rate, voltage, input power, plenum temperatures, etc. The resolved bubbling model uses the multiphase volume of fluid approach to model the system with a high-resolution interface capturing scheme to maintain sharp interfaces between the molten glass and the air phase. The suite of CFD models is continually being improved to incorporate more realistic physics and achieve faster turnaround time. For example, an incremental controller is implemented to automatically adjust electrode voltage within the simulation to a molten glass set point temperature of 1150°C. Newer models feature improved meshes to ensure conformal meshes between regions and eliminate unnecessary mesh refinement in areas that are not of interest (such as boundary layers in offgas ports). Instead of explicitly modeling the structural, refractory, and insulation layers of the melter, a thermal resistance approach is used with published correlations used for boundary conditions. The development of robust and efficient CFD models will be instrumental in enabling the WTP to successfully fulfill its mission of safely stabilizing legacy nuclear waste.

12 - MGMT OF RADIOACTIVE AND NON-RADIOACTIVE WASTE↗
DOE OSTI2025

Influence of Alkyne Precursor Structure on Carbon Nanotube Chiral Distribution: Data-Dense Analysis Across Multiple Catalyst Types

Carbon nanotubes (CNTs) are a desirable material in the field of optoelectronics and semiconductors due to electronic properties (e.g., bandgap) that are dependent upon their chirality, defined by their diameter and lattice angle. Unfortunately, industrial-scale syntheses have yet to realize growth of a single desired chirality and instead rely on postsynthetic separation techniques to refine a chiral mixture, which increases process complexity and cost. Here, we studied the influence of precursor structure on chiral distribution, using a series of terminal alkyne precursors (acetylene, methylacetylene, vinylacetylene, 1-butyne, two enantiomers of 3-butyn-2-ol and a racemic mixture thereof) to grow CNTs across five transition-metal catalysts (Fe, FeMo, and three proportions of CoMo). Multiwavelength Raman spectroscopy on 5,145 spots (5 catalysts, 7 precursors, 3 lasers, and 49 distinct substrate locations on each) determined that acetylene grew the smallest diameter CNTs, while vinylacetylene produced fewer subnanometer CNTs. Though precursor structure did not dictate a uniform chiral shift, it was shown to broaden or narrow chiral distribution, while catalyst structure played a dominant role. In conclusion, this is consistent with metal-precursor binding occurring through unsaturated bonds in the hydrocarbons via the alkyne polymerization mechanism.

Carbon nanotubes↗
DOE OSTI2025

Electron ptychography reveals a ferroelectricity dominated by anion displacements

Sodium niobate, a lead-free ferroic material, hosts delicately balanced, competing order parameters, including ferroelectric states that can be stabilized by epitaxial strain. Here we show that the resulting macroscopic ferroelectricity exhibits an unconventional microscopic structure using multislice electron ptychography. This technique overcomes multiple scattering artefacts limiting conventional electron microscopy, enabling both lateral spatial resolution beyond the diffraction limit and recovery of three-dimensional structural information. These imaging capabilities allow us to separate the ferroelectric interior of the sample from the relaxed surface structure and identify the soft phonon mode and related structural distortions with picometre precision. Unlike conventional ferroelectric perovskites, we find that the polar distortion in this material involves minimal distortions of the cation sublattices and is instead dominated by anion displacements relative to the niobium sublattice. We establish limits on film thickness for interfacial octahedral rotation engineering and directly visualize a random octahedral rotation pattern, arising from the flat dispersion of the associated phonon mode.

ferroelectrics and multiferroics↗
DOE OSTI2024

Reducing uncertainty of polar to midlatitude linkages using DOE’s E3SM in a coordinated model-experiment setting

This project brought DOE’s climate modeling effort with the Energy Exascale Earth System Model into the Polar Amplification Model Intercomparison Project (PAMIP), which is part of the sixth and latest Coupled Model Intercomparison Project, CMIP6. PAMIP examines the causes and consequences of polar amplification, when external forcing results in a larger temperature increase in high latitudes than the global average, in a coordinated set of model experiments with a common modeling protocol. Our teams from UC Irvine and the University of Toronto have designed, carried out, analyzed, and disseminated PAMIP output from the Energy Exascale Earth System Model (E3SM) and the Community Earth System Model (CESM). PAMIP’s ongoing stream of significant new results have advanced progress in the community’s understanding and led to new outstanding research questions that have motivated further work. PAMIP has led to improved consensus on the atmospheric response to sea ice loss. The important finding is that for a similar sea ice anomaly forcing, the simulated atmospheric response in the troposphere is remarkably consistent among the 16 models’ runs analyzed. The zonal-mean tropospheric response consists of a very robust equatorward shift of the westerly flow in mid-latitudes. However, while the multi-model mean response is robust, it has a weak amplitude relative to internal variability. We identified a weakness in the models (including E3SM) in terms of their response to sea-ice forcing that is related to eddy forcing (or nonlinear dynamical effects) at mid- to high latitudes. In fact, E3SM is an outlier in terms of the models participating, and in that sense, it turned out to be a vital participant model. We found that reductions in energy transport due sea-ice loss and involving dry air only are compensated by increases in moist energy transport from warmer sea surface temperature in midlatitudes. This leads to a large spread in energy transport into the Arctic and is a potential source of spread in Arctic amplification. We identified an important role that climate modes, including tropical modes of variability (El Nino and the Southern Oscillation (ENSO); the Quasi-biennial Oscillation (QBO)) play in the response to sea-ice anomalies, including in ocean coupled experiments. Similarly, we identified and quantified the contribution of sea-ice thickness to the atmospheric response compared to the response to sea-ice extent only. We found that it is important to run large ensembles and even with an ensemble size of 100 simulations the response is largely influenced by internal variability. We demonstrated convincingly that Ural blocking, not sea-ice loss, provides the weakening of the stratospheric polar vortex in fall/early winter and a negative phase of the North Atlantic Oscillation that can last for up to two months. However, sea-ice anomalies can influence the background flow so that the response to Ural blocking is more persistent under low sea-ice conditions in the Barents/Kara Sea than high sea ice Atmospheric model hierarchies that progressively add individual processes have a long history in providing dynamical insight for modeling the atmosphere. Similarly, coupled model hierarchies that progressively add individual ocean processes can provide insights into the workings of the coupled climate system, however such hierarchies have not been available except for a non-dynamical slab ocean model. Because of the missing processes, surface flux corrections must be added to produce a target climate. In this project, we managed to overcome this problem and develop a globally coupled ocean model hierarchy in CESM that can turn on and off the processes of mixed-layer entrainment and Ekman flow. We used the hierarchy to study the impact of Arctic sea-ice loss on the climate system. We find that the effect of mixed-layer entrainment on ocean heat uptake influences the atmospheric circulation by shifting the latitudinal positions of the mid-latitude westerly jet and the Intertropical Convergence Zone (ITCZ). In quadrupled CO 2 experiments, we studied how air-sea coupling affects the response of tropical rainfall under global warming. In order to identify the importance of individual ocean processes, we used the hierarchy of ocean models to separate the effects of seasonal mixed-layer entrainment, wind-driven Ekman flows, and frictional flows. We showed that including Ekman and frictional flows allows our simulation to produce the Pacific Ocean's enhanced equatorial warming pattern and equatorward ITCZ contraction noted in previous climate simulations. We also showed that the frictional flow, which has yet to receive much attention, is as important as the Ekman flow in generating equatorial heat convergence.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Nanodiffraction imaging of ionically driven phase separation in cobaltite heterostructures

Controlling the anionic stoichiometry and distribution of perovskite cobaltites presents a powerful method for tailoring the magnetic and electronic properties for magneto-ionic applications. Nevertheless, the influence of nanoscale morphology, including phase separation and defects in cobaltite heterostructures, remains largely unexplored. We used x-ray nanodiffraction to directly image the nanoscale topotactic phase transformation in La 1−x Sr x CoO 3 (LSCO) heterostructures capped with a reactive aluminum (Al) layer (i.e., oxygen “getter”) of varying thicknesses (0.5, 3, and 7 nm). Nanodiffraction images reveal the formation of highly elongated BM filaments extending over mesoscopic lengths (>67 μm), indicating a strong tendency toward oxygen vacancy ordering in both P and BM phases in all heterostructures. Local strain and strain gradient analysis shows a strong correlation between the depletion of the P phase and strain gradients. Our measurements suggest that elongation of the BM filaments is the predominant mechanism for topotactic transformation in LSCO/Al heterostructures, preferred over coarsening, branching, and fractal growth. Our study provides a detailed nanoscale analysis of ionically driven phase transitions in LSCO/Al heterostructures, which is crucial for tailoring the functional properties of cobaltites for magneto-ionic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Water content modulation enables selective ion transport in 2D MXene membranes

Separation membranes are critical for a range of processes, including but not limited to water desalination, chemical and fuel production, and recycling and recovery applications. Fundamentally, there are intrinsic trade-offs between permeability and selectivity. Local water organization and content can impact membrane structure (short- and long-range) in laminar transition metal carbide (MXene) membranes and impact selective ion permeation. Intercalation of chaotropic cesium (Cs + ) ions within the layers reduces the water content in the membrane and at the surface which cannot be found in the intercalation of other ions. Additionally, 3D imaging using focused ion beam scanning electron microscopy showed fewer defects in the Cs-MXene membrane, due to reduced local water content, leading to more efficient ion sieving. X-ray diffraction and density functional theory calculations on the nanochannel structure demonstrated that the chaotropic ion results in the smallest nanochannel size and induces a stronger resistance to water-induced nanochannel swelling. With a narrower nanochannel, the Cs-MXene membrane limits ion transport pathways, resulting in more selective transport of lithium over other metal cations, as evidenced in both experiment and molecular dynamics simulations. In conclusion, our findings highlight the potential for controlling the structural organization of 2D MXene membranes to enable on-demand transport of ions for diverse applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Design progress for the 22 GeV CEBAF energy upgrade

In this work we examine the progress made in the design of the proposed FFA upgrade to the Continuous Electron Beam Accelerator Facility (CEBAF). This proposed upgrade will double the number of passes through the two linacs by replacing the two highest energy arcs with new Fixed Field Alternating Gradient (FFA) arcs, roughly doubling the energy. These FFA arcs will use permanent magnets in a Halbach configuration to shape their fields. The design involves new optics for the linacs and remaining electromagnetic arcs, as well as new electromagnetic separators. These feed into the permanent magnet FFA arcs. We also report on ongoing studies of the dynamics of the beams, and an experiment to measure the effects of radiation on the permanent magnets.

Accelerator Physics↗
DOE OSTI2025

Resolving local structural motifs across the phase evolution of zinc titanates with computational x-ray absorption spectroscopy

Resolving the local structure motifs that characterize phase evolution as a function of composition is a key challenge in structure characterization of complex materials. Here, in this study, we combine first-principles simulations and x-ray absorption near-edge structures (XANES) analysis to gain insights into the structure evolution revealed by measurements across a combinatorial zinc titanate thin film, which was grown with smoothly varying composition over a wide range of the Ti:Zn ratio. Specifically, we propose a cluster blind-signal-separation (cBSS) method for XANES spectral analysis based on a library of the structures and spectra of representative local motifs. In addition to motifs from zinc titanate crystals, two types of Ti-defect models constructed in this study are key to the understanding of the structure characteristics in the Zn-rich region. The cBSS method makes use of both spectral clustering of the simulated site-XANES spectra library and the BSS procedure to construct high-fidelity spectral basis functions from an experimental spectral sequence. The method provides a rigorous measure of the spectral sensitivity and basis completeness. The results of the XANES analysis are corroborated with other experimental modalities, including x-ray diffraction and spectroscopic ellipsometry, to validate the cBSS method. The calculated motif weights resulting from fitting the XANES spectra with the cBSS basis probe the atomic structure characteristics of both crystalline and amorphous phases as a function of the Ti/Zn composition. The insights of the local structure motif evolution are pivotal to the understanding of the nonmonotonic trend in the optical gap, which may lead to potential applications through tuning the optical properties of zinc titanate. The workflow of the XANES spectral analysis developed in this work can be generalized to construct the structure-property relationship in a broad material space.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Dome-like pressure-temperature phase diagram of the cooperative Jahn–Teller distortion in NaNiO 2

NaNiO 2 is a Ni 3+ -containing layered material consisting of alternating triangular networks of Ni and Na cations, separated by octahedrally-coordinated O anions. At ambient pressure, it features a collinear Jahn–Teller distortion below $T^{JT}_{onset} ≈ 480$ K, which disappears in a first-order transition on heating to $T^{JT}_{onset} ≈ 500$ K, corresponding to the increase in symmetry from monoclinic to rhombohedral. It was previously studied by variable-pressure neutron diffraction (Nagle-Cocco et al 2022 ACS Inorg. Chem. 61 4312) and found to exhibit an increasing $T^{JT}_{onset}$ with pressure up to ∼5 GPa. In this work, powdered NaNiO 2 was studied via variable-pressure synchrotron x-ray diffraction up to pressures of ∼67 GPa at 294 K and 403 K. Suppression of the collinear Jahn–Teller ordering is observed via the emergence of a high-symmetry rhombohedral phase, with the onset pressure occurring at ∼18 GPa at both studied temperatures. Further, a discontinuous decrease in unit cell volume is observed on transitioning from the monoclinic to the rhombohedral phase. These results taken together suggest that in the vicinity of the transition, application of pressure causes the Jahn–Teller transition temperature, $T^{JT}_{onset}$, to decrease rapidly. We conclude that the pressure-temperature phase diagram of the cooperative Jahn–Teller distortion in NaNiO 2 is dome-like.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Rigid Supramolecular Aramid Nanotubes as Catalyst Supports

Solution‐phase heterogeneous catalysts benefit from nanoscale dimensions, which maximize specific surface area and enhance catalytic activity. However, the ease of recovering such nanocatalysts depends on the design of the support materials, which are often particle‐like. Rigid 1D nanomaterials are proposed as supports that can enhance separability while offering high volumetric specific surface area for greater catalyst loading and activity. Here, aramid amphiphiles (AAs) are designed to spontaneously self‐assemble in water into high‐aspect‐ratio supramolecular nanotubes with tunable surface chemistry. These AA nanotubes exhibit high persistence lengths (P = 750 ± 340 µm) and mechanical stiffnesses (3 N/m). Incorporating surface thiol groups enables immobilization of catalytic gold nanoparticles. The resulting AA nanotube‐gold nanoparticle complexes exhibit high catalytic activity, efficient recoverability via simple microfiltration, and sustained reusability over ten reaction cycles. This study demonstrates the utility of molecular self‐assembled 1D nanomaterials as versatile scaffolds for the reuse and recovery of nanoscale catalysts.

1D nanomaterials↗
DOE OSTI2024

Retrofitting Holcim Ste. Genevieve Cement Plant with CO2 Capture Plant Using Air Liquide Cryocap™ FG Technology

The global cement manufacturing industry is a major contributor to carbon dioxide emissions. The International Energy Agency's "Net Zero Emissions by 2050 Scenario" identifies CCS as a major strategy for meeting that goal. This project is among the first attempts to transfer capture technology developed at coal-fired power plants to the cement industry. The main objective of the project is to execute and complete a front-end engineering and design (FEED) studies for commercial-scale, carbon capture projects that separates 95% of the total CO2 emissions at the Holcim (US) Ste. Genevieve cement manufacturing facility using Air Liquide’s Pressure Swing Adsorption system (PSA) assisted Cryocap™ technology. The Holcim Ste. Genevieve cement plant in Missouri, US, boasts one of the largest single cement production lines in the world, with a capacity of approximately 12,000 t/day. The plant currently uses traditional fuels, namely coal and petcoke. The captured CO2 will be pipeline and geological storage grade. The industrial host site emits approximately 3.0 million tonne CO2/yr. Air Liquide’s Cryocap™ technology has been developed over the last 18+ years for CO2 capture applications. It has been shown to be applicable to a variety of industrial applications (e.g., steel, cement, SMR, Fluidized Catalytic Crackers (FCCs)). Cryocap™ FG consists of a Pressure Swing Adsorption (PSA) unit coupled with a Cryogenic System. The PSA pre-concentrates the CO2 from the flue gas, while the cryogenic unit enables the CO2 purity to be increased to the desired level. The project team is led by the Prairie Research Institute at the University of Illinois at Urbana-Champaign. The tasks include: complete FEED study for retrofitting the industrial facility with a carbon capture system to support developing a detailed cost estimate; business case analysis outlining the anticipated revenue and credits if projects was built and operated; technoeconomic analysis (TEA) outlining how capture system achieves DOE capture goals; and life cycle (LCA) analysis demonstrating zero net carbon emissions. The FEED study was successfully completed. This includes completing the process basis of design; preliminary engineering; outside battery limits (OSBL) detailed engineering including a Zero Liquid Discharge (ZLD) wastewater treatment system; inside battery limits (ISBL) detailed engineering [1]. An overall project capital cost estimate within a -20%/+30% accuracy was developed. The major contributors to the Total Plant Cost (TPC), by system, are the costs associated with the Outside Battery Limit (OSBL) section of the plant which includes a new river water intake structure and a Zero Liquid Discharge (ZLD) system. By cost category, the major contributors to the TPC are equipment and subcontractor costs, followed closely by engineering, construction management, home office and contractor fees. The TEA has been created to reflect the findings of the project. It analyzes the economic performance of the Cryocap™ technology by reviewing the estimated capital costs, operating cost, and revenue. The Cost of Capture (COC) associated with the Cryocap™ technology for 95% CO2 capture, when considering NETL 2018 economic assumptions (42/58 debt/equity ratio, 5.15% interest on debt and 1.42% return on equity in real dollars) and 2022 economic assumptions (42/58 debt/equity ratio, 8.82% interest on debt and 4.90% return on equity in real dollars) was found to be much lower than that for the DOE-NETL’s base-line cases. The highest contributors to the COC are annualized capital expenditures (CAPEX) and electricity consumption which can be offset by using lower cost renewable sources. The LCA was conducted using OpenLCA which is an open-source software that is recommended by NETL. The database utilized for this study was a modified version of TRACI 2.1 (developed by the US. Environmental Protection Agency’s National Risk Management Research Laboratory and modified by NETL). The Cryocap™ FG technology does not consume fuels in significant quantities and does not utilize specialized chemical solvents subject to decomposition, such as those utilized in amine-based carbon capture systems. The Cryocap™ FG technology mainly utilizes electricity as its energy input; hence, its calculated emissions are mainly associated with the generation of electricity offsite and are dependent on the energy matrix of the grid at the time of project implementation. The water consumption impact of the Cryocap™ FG is mostly for makeup of the water lost by evaporation in the cooling tower; however, the carbon capture plant will be equipped with a ZLD system to avoid effluent streams and minimize water consumption. The successful construction and operation of this plant based on this study results will provide a means to demonstrate an economically attractive and transformational capture technology that can be used to retrofit existing plants and be deployed at new plants.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2024

Mark-18A Cold Runs

The Savannah River National Laboratory (SRNL) is tasked by the National Nuclear Security Administration (NNSA) to recover highly valued isotopes from irradiated Mark-18A (Mk-18A) targets. The Savannah River Site (SRS) has sixty-five Mk-18A targets available for the recovery of the high valued materials. The sixty-five Mk-18A targets are currently stored in the L-Area Basin and will be removed one at a time and individually transported to SRNL. Upon receipt at SRNL, the Mk-18A target material will be removed from the confinement, dissolved, chemically separated, and calcined to a stable oxide. The flowsheet is designed to recover the plutonium as well as the trivalent actinides. The remaining unrecovered material will be discarded to the high activity drain (HAD) system in SRNL. A specially designed cask was procured for transport of the targets from L-Area to SRNL. Once received at SRNL, the targets will be loaded into the back of Cell 7 and resized as they enter the cell. The resized targets (1/4 lengths) will then be processed one at a time through the following processes: caustic dissolution and filtration; acidic dissolution and filtration, Reillex anion exchange, diglycolamide (DGA) cation exchange; and DGA calcination. This processing will result in two product streams. The first is an aqueous plutonium solution which will be removed from the shielded cells and taken to a glovebox for further purification and conversion to an oxide. The second is a calcined oxide containing the Am and Cm as well as other lanthanide fission products which will be removed from the shielded cells using a bagless transfer system. Both materials will be packaged for shipment to Oak Ridge National Laboratory (ORNL). All equipment to carry out this process was designed, procured or fabricated, and installed in a mock-up facility (716-4A) at SRS to allow for simulation testing in a non-radioactive area. This equipment was then dismantled and transferred from 716-4A to 773-A and installed in the SRNL Shielded Cells. After installation in the shielded cells facility testing was performed using water followed by surrogates and cold chemicals. Issues were identified during these evaluations, including equipment issues as well as technical challenges. Many of the issues were rectified during performance of the cold runs, and the remaining have a resolution identified. Table ES-1 provides a summary of all issues identified during the cold run operations, as well as the status and identified resolutions to outstanding issues.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2026

Evolution of size-selected Pt cluster catalysts on prototypical oxide supports

The current quest for new pathways into sustainable, efficient and durable energy conversion technologies makes the used for a fundamental understanding of the atomic-scale phenomena underlying catalytic processes ever more pressing. In this context, characterizing catalyst particles in situ provides valuable information about the evolution of their composition, structure, oxidation state and charge state during an ongoing process. To disentangle the influence of individual parameters – temperature, pressure, gas composition, cluster size, as well as support acidity, redox state and defect density – it is crucial to control them precisely and separately in experiments. At the example of size-selected Pt n clusters – i.e. sub-nm particles defined to the exact number of atoms – on flat oxide supports, we follow their rich evolution phenomena via (synchrotron-based) X-ray photoelectron spectroscopy (XPS) and scanning tunnelling microscopy (STM) during temperature ramps and in various gas environments. Here, we present our experience with these highly defined, yet complicated-to-create samples in ultra-high vacuum (UHV) and at mbar pressures. We discuss their stability during transport to synchrotrons and under reaction conditions on three prototypical oxide supports and show the various phenomena that can be disentangled. Ptn clusters on the non-reducible silicon dioxide, SiO 2 , remain size-selected and show remarkable stability. Doping strongly influences the size-dependent binding energy shifts and changes the Pt response to oxidative and reaction conditions, which we attribute to different cluster geometries: p-type doping leads to wetting, enhanced sinter resistance and a diminished response to oxidative environments, compared to clusters on n-type doped samples. We compare the system with our previous findings of a similar change in dimensionality for Pt 20 clusters on the reducible ceria, CeO 2 (111), support, induced by modulation of its O vacancy density. The Pt n /CeO 2 system is particularly interesting for strategies to stabilize and redisperse Pt clusters dynamically. Finally, we study the evolution of Pt n clusters on another reducible oxide support, magnetite, Fe 3 O 4 (001), in 0.1 mbar alternating redox conditions at RT and elevated temperature. In analogy to findings previously reported for Pt/TiO 2 (110), the clusters either become encapsulated by a thin oxide film via strong metal–support interaction (SMSI) or deeply buried in the magnetite. Overall, our approach of following the evolution of size-selected clusters on oxide supports leads to fundamental atomic-scale insights on nano-scale catalyst materials, on our path to sustainable, dynamic and self-repairing catalysts.

Falling, Lorenz J. [Technical Univ. of Munich (Ger↗
DOE OSTI2026

CHESS 2025: Leaf Area Index (LAI) for meadow, shrub, tree, and understory vegetation

This dataset contains Leaf Area Index (LAI) measurements made as part of the Colorado Headwaters Ecological Spectroscopy Study (CHESS) during June and July of 2025. Data were collected in the Upper Gunnison Basin, Colorado, across three study domains: the Upper East River (CRBU), Almont Triangle (ALMO), and the Upper Taylor Basin (UPTA). Field observations of LAI were collected within 72 hours of airborne data collection by the National Ecological Observatory Network’s Aerial Observation Platform (NEON AOP). The NEON AOP collected waveform LiDAR (Light Detection and Ranging) and imaging spectrometer data in 426 spectral bands from the visible to shortwave infrared. LAI measurements were collected using the LICOR LAI-2200C Plant Canopy Analyzer following protocols outlined in the instrument manual (LI-COR 2019). Sampling targeted four distinct vegetation types: meadows, shrubs, trees, and aspen forest understory. We have archived data separately by site type because different field methods were used for each. At meadow sites, measurements were made at the four corners of 1m x 1m plots, with the instrument moving inward toward the center of the plot. At shrub sites, we measured the canopies of individual shrubs. At tree sites, we made measurements within a 10m x 10m subplot centered around a focal tree, with 30 observations taken on a regular grid. At aspen understory sites, we measured overstory trees following the tree protocol and understory herbaceous vegetation following the meadow protocol. All measurements included above-canopy (A) and below-canopy (B) readings, with specific protocols for scattering correction measurements in direct-sun conditions. Data were processed using the R package `rlai` (Worsham 2025). This package includes functions to calculate LAI, gap fraction, apparent clumping factor (Ω), scattering correction, and other canopy metrics. Package contents: Full file descriptions appear in ‘flmd.csv’. Files named according to the convention ‘lai_*_summary_data_cleaned.csv’ contain summary values of LAI, apparent clumping factor (Ωapp), and scattering correction factors for each site. These are the analysis-ready products that most data users will work with. Files named ‘lai_*_metadata_cleaned.csv’ contain additional site-level observations made during field collection. We have also archived intermediate and supplementary data for users who wish to check our processing approach or apply alternative methods. ‘raw_lai_2200C.zip’ contains the raw files as read from the LI-COR instrument, with no processing applied, in TXT format. The zip archive contains subdirectories by site type, which are further subdivided by sampling area. Filenames correspond to the sampling site number. ‘intermediate_results.zip’ contains detailed output from the processing routines, in JSON format. The zip archive contains subdirectories by site type; filenames correspond to the sampling site number. ‘scattering_correction_logs.zip’ contains logfiles from the implementation of Kobayashi et al.'s (2013) scattering correction algorithm. The logfiles report values of several parameters at each iteration of the algorithm, as the model converges toward a stable solution. They are intended for users who want to verify scattering correction performance. The zip archive contains subdirectories by site type; filenames correspond to the sampling site number. ‘spot_checks.csv’ reports LAI and other values for a small number of files processed with LI-COR FV2200 software (LI-COR 2013) using the same control parameters as in our R-based approach. Additional metadata are provided in a data dictionary describing column names and definitions (dd.csv), and in a file-level metadata file (flmd.csv). All zip files can be expanded with common archive utilities. TXT, CSV, and JSON files can be ingested into R or Python computing environments or read in common text editor utilities. Geospatial information: Geospatial data for mapping measurement site locations are in the files CHESS_polygons_lai_UTM.geojson, CHESS_polygons_shrub_UTM.geojson, and CHESS_polygons_meadow_UTM.geojson in the companion geospatial package for the 2025 CHESS campaign, ‘CHESS 2025: Location data for field observations and sampling’ (Henderson et al., 2026). CHESS Project Description: The Colorado Headwaters Ecological Spectroscopy Study (CHESS) comprised a multi-week airborne remote sensing and field observation campaign in the Upper Gunnison Basin, Colorado, conducted in June and July of 2025. Airborne remote sensing was conducted by the National Ecological Observatory Network Airborne Observation Platform (NEON AOP), concurrent with a field campaign run by the Rocky Mountain Biological Laboratory (RMBL), the Lawrence Berkeley National Laboratory (LBNL) and SLAC National Accelerator Laboratory Watershed Function Science Focus Area (SFA), and NASA-JPL (Jet Propulsion Laboratory) Earth Surface Mineral Dust Source Investigation (EMIT) program. Between June 10 and July 18, 2025, the NEON AOP flight team collected high-resolution aerial imaging spectroscopy and Light Detection and Ranging (LiDAR) data over three domains: the Upper East River (CRBU), Almont Triangle (ALMO), and the Upper Taylor Basin (UPTA). In coordination with the flights, a field campaign acquired ground-truth observations, including observations of vegetation composition, foliar traits, forest demography, and subsurface properties in 18 core sampling areas within the domains. Additional surface water observations were taken at over 380 point locations. All CHESS campaign datasets can be found within the CHESS ESS-DIVE data portal: https://data.ess-dive.lbl.gov/portals/chess. Funding Acknowledgement: Field and remote-sensing data acquisition was performed under a grant from the National Aeronautics and Space Administration (80NSSC24K1005). This work was also supported by the Watershed Function Science Focus Area at Lawrence Berkeley National Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-05CH11231. * Todorov and Worsham are co–first authors.

2018 NEON and 2025 CHESS Campaigns↗
DOE OSTI2025

Berkelium–carbon bonding in a tetravalent berkelocene

Interest in actinide–carbon bonds has persisted since actinide organometallics were first investigated for applications in isotope separation during the Manhattan Project. Transplutonium organometallics are rarely isolated and structurally characterized, likely owing to limited isotope inventories, a scarcity of suitable laboratory infrastructure, and intrinsic difficulties with the anaerobic conditions required. In this paper, we report the discovery of an organometallic “berkelocene” complex prepared from 0.3 milligrams of berkelium-249. Single-crystal x-ray diffraction shows a tetravalent berkelium ion between two substituted cyclooctatetraene ligands, resulting in the formation of berkelium–carbon bonds. The coordination in berkelocene resembles that of uranocene, and calculations show that the berkelium 5f orbitals engage in covalent overlap with the δ-symmetry orbitals of the cyclooctatetraenide ligand π system. Charge transfer from the ligands is diminished relative to uranocene and other actinocenes, which maximizes contributions from the stable, half-filled 5f 7 configuration of tetravalent berkelium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Non–linear bonding trends in maleonitrile-1,2–dithiolate complexes of the transuranium actinides

The trivalent actinides are produced in the nuclear fuel cycle during power production and provide the largest long-term radiation dose in used nuclear fuel. It is ideal for these elements to be removed from used nuclear fuel for disposal and a necessity for fuel recycling. A key challenge to this is the similarity of chemical behavior of the trivalent actinides to the lanthanides that are also present as fission products in used fuel. Thus far, some of the most effective separations of actinides from lanthanides utilise chelating agents containing sulfur moieties such as dithiophosphinates that selectively bind to actinide ions because of a greater bond covalency relative to lanthanide ions. Typically, greater differences between actinide and lanthanide ions are observable the more ligands and chelators bonds have a covalent character. Here, a series of complexes of the trivalent actinides Np(III) through Cf(III) (excluding Bk(III)) with maleonitrile-1,2-dithiolate (mnt 2– ) are synthesized along with their lanthanide counterparts (La(III) – Nd(III), Sm(III) – Gd(III), Dy(III)), in order to characterize the nature of chemical bonds with these metal ions and a polarizable, non-innocent, sulfur-donor ligand. The metal-sulfur bonds in these complexes trend shorter than measured for lanthanides with equivalent ionic radii. However, particularly large deviations are observed in the neptunium and plutonium complexes in both structure and bonding, resulting in a nonlinear bond length trendline for the actinide series. Density Functional Theory (DFT) calculations with Quantum Theory of Atoms in Molecules (QTAIM) and Natural Bond Order (NBO) analyses indicate that for the neptunium and plutonium complexes, the presence of increased 5f-orbital participation, energy degeneracy of the metal and ligand orbitals, and the structure packing result in shortened M–S bonds. The stabilization of the energy of the 5f-orbitals and the decrease in f-contribution to bonding orbitals in the later actinides results in structural properties more similar to the lanthanide complexes.

07 ISOTOPE AND RADIATION SOURCES↗